6f56a23136
They aren't specific to AC power operation anymore. Also adapt autoport. Change-Id: Ib04d0a08674b7d2773d440d39bd6dfbd4359e0fb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49089 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
161 lines
5.2 KiB
Plaintext
161 lines
5.2 KiB
Plaintext
chip northbridge/intel/sandybridge
|
|
register "gfx" = "GMA_STATIC_DISPLAYS(1)"
|
|
|
|
# Enable DisplayPort Hotplug with 6ms pulse
|
|
register "gpu_dp_d_hotplug" = "0x06"
|
|
|
|
# Enable Panel as LVDS and configure power delays
|
|
register "gpu_panel_port_select" = "PANEL_PORT_LVDS"
|
|
register "gpu_panel_power_cycle_delay" = "6" # T7: 500ms
|
|
register "gpu_panel_power_up_delay" = "100" # T1+T2: 10ms
|
|
register "gpu_panel_power_down_delay" = "100" # T5+T6: 10ms
|
|
register "gpu_panel_power_backlight_on_delay" = "2100" # T3: 210ms
|
|
register "gpu_panel_power_backlight_off_delay" = "2100" # T4: 210ms
|
|
register "gpu_cpu_backlight" = "0x1155"
|
|
register "gpu_pch_backlight" = "0x11551155"
|
|
|
|
device cpu_cluster 0x0 on
|
|
chip cpu/intel/model_206ax # FIXME: check all registers
|
|
register "acpi_c1" = "1"
|
|
register "acpi_c2" = "3"
|
|
register "acpi_c3" = "5"
|
|
device lapic 0x0 on end
|
|
device lapic 0xacac off end
|
|
end
|
|
end
|
|
|
|
device domain 0x0 on
|
|
subsystemid 0x17aa 0x21f3 inherit
|
|
|
|
chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
|
|
register "c2_latency" = "0x0065"
|
|
register "docking_supported" = "1"
|
|
register "gen1_dec" = "0x000c15e1"
|
|
register "gen2_dec" = "0x007c1601"
|
|
register "gen3_dec" = "0x000c06a1"
|
|
register "gpi13_routing" = "2"
|
|
register "gpi1_routing" = "2"
|
|
register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 0, 0 }"
|
|
register "pcie_port_coalesce" = "1"
|
|
register "sata_interface_speed_support" = "0x3"
|
|
register "sata_port_map" = "0x17"
|
|
register "superspeed_capable_ports" = "0x0000000f"
|
|
register "xhci_overcurrent_mapping" = "0x04000201"
|
|
register "xhci_switchable_ports" = "0x0000000f"
|
|
|
|
# device specific SPI configuration
|
|
register "spi_uvscc" = "0x2005"
|
|
register "spi_lvscc" = "0x2005"
|
|
|
|
device pci 14.0 on end # USB 3.0 Controller
|
|
device pci 16.0 on end # Management Engine Interface 1
|
|
device pci 16.1 off end # Management Engine Interface 2
|
|
device pci 16.2 off end # Management Engine IDE-R
|
|
device pci 16.3 off end # Management Engine KT
|
|
device pci 19.0 on end # Intel Gigabit Ethernet
|
|
device pci 1a.0 on end # USB2 EHCI #2
|
|
device pci 1b.0 on end # High Definition Audio Audio controller
|
|
device pci 1c.0 on # PCIe Port #1
|
|
chip drivers/ricoh/rce822 # Ricoh cardreader
|
|
register "disable_mask" = "0x87"
|
|
register "sdwppol" = "1"
|
|
device pci 00.0 on end # Ricoh SD card reader
|
|
end
|
|
end
|
|
device pci 1c.1 on end # PCIe Port #2
|
|
device pci 1c.2 on # PCIe Port #3
|
|
smbios_slot_desc "7" "3" "ExpressCard Slot" "8"
|
|
end
|
|
device pci 1c.3 off end # PCIe Port #4
|
|
device pci 1c.4 off end # PCIe Port #5
|
|
device pci 1c.5 off end # PCIe Port #6
|
|
device pci 1c.6 off end # PCIe Port #7
|
|
device pci 1c.7 off end # PCIe Port #8
|
|
device pci 1d.0 on end # USB2 EHCI #1
|
|
device pci 1e.0 off end # PCI bridge
|
|
device pci 1f.0 on # LPC bridge PCI-LPC bridge
|
|
chip ec/lenovo/pmh7
|
|
register "backlight_enable" = "0x01"
|
|
register "dock_event_enable" = "0x01"
|
|
device pnp ff.1 on end # dummy
|
|
end
|
|
chip ec/lenovo/h8
|
|
device pnp ff.2 on # dummy
|
|
io 0x60 = 0x62
|
|
io 0x62 = 0x66
|
|
io 0x64 = 0x1600
|
|
io 0x66 = 0x1604
|
|
end
|
|
register "config0" = "0xa7"
|
|
register "config1" = "0x01"
|
|
register "config2" = "0xa0"
|
|
register "config3" = "0xe2"
|
|
|
|
register "has_keyboard_backlight" = "0"
|
|
|
|
register "beepmask0" = "0x02"
|
|
register "beepmask1" = "0x86"
|
|
register "has_power_management_beeps" = "1"
|
|
register "event2_enable" = "0xff"
|
|
register "event3_enable" = "0xff"
|
|
register "event4_enable" = "0xf0"
|
|
register "event5_enable" = "0x3c"
|
|
register "event6_enable" = "0x00"
|
|
register "event7_enable" = "0xa1"
|
|
register "event8_enable" = "0x7b"
|
|
register "event9_enable" = "0xff"
|
|
register "eventa_enable" = "0x00"
|
|
register "eventb_enable" = "0x00"
|
|
register "eventc_enable" = "0xff"
|
|
register "eventd_enable" = "0xff"
|
|
register "evente_enable" = "0x0d"
|
|
|
|
register "has_bdc_detection" = "1"
|
|
register "bdc_gpio_num" = "54"
|
|
register "bdc_gpio_lvl" = "0"
|
|
|
|
register "has_wwan_detection" = "1"
|
|
register "wwan_gpio_num" = "70"
|
|
register "wwan_gpio_lvl" = "0"
|
|
end
|
|
chip drivers/lenovo/hybrid_graphics
|
|
device pnp ff.f on end # dummy
|
|
|
|
register "detect_gpio" = "21"
|
|
|
|
register "has_panel_hybrid_gpio" = "1"
|
|
register "panel_hybrid_gpio" = "52"
|
|
register "panel_integrated_lvl" = "1"
|
|
|
|
register "has_backlight_gpio" = "0"
|
|
register "has_dgpu_power_gpio" = "0"
|
|
|
|
register "has_thinker1" = "1"
|
|
end
|
|
chip drivers/pc80/tpm
|
|
device pnp 0c31.0 on end
|
|
end
|
|
end
|
|
device pci 1f.2 on end # SATA Controller 1
|
|
device pci 1f.3 on # SMBus
|
|
chip drivers/i2c/at24rf08c # eeprom, 8 virtual devices, same chip
|
|
device i2c 54 on end
|
|
device i2c 55 on end
|
|
device i2c 56 on end
|
|
device i2c 57 on end
|
|
device i2c 5c on end
|
|
device i2c 5d on end
|
|
device i2c 5e on end
|
|
device i2c 5f on end
|
|
end
|
|
end
|
|
device pci 1f.5 off end # SATA Controller 2
|
|
device pci 1f.6 off end # Thermal
|
|
end
|
|
device pci 00.0 on end # Host bridge Host bridge
|
|
device pci 01.0 on end # PCIe Bridge for discrete graphics
|
|
device pci 02.0 on end # Internal graphics VGA controller
|
|
device pci 04.0 off end # Signal processing controller
|
|
end
|
|
end
|