git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1651 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
		
			
				
	
	
		
			231 lines
		
	
	
		
			6.8 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			231 lines
		
	
	
		
			6.8 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * jedec.c: driver for programming JEDEC standard flash parts
 | |
|  *
 | |
|  *
 | |
|  * Copyright 2000 Silicon Integrated System Corporation
 | |
|  *
 | |
|  *	This program is free software; you can redistribute it and/or modify
 | |
|  *	it under the terms of the GNU General Public License as published by
 | |
|  *	the Free Software Foundation; either version 2 of the License, or
 | |
|  *	(at your option) any later version.
 | |
|  *
 | |
|  *	This program is distributed in the hope that it will be useful,
 | |
|  *	but WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | |
|  *	GNU General Public License for more details.
 | |
|  *
 | |
|  *	You should have received a copy of the GNU General Public License
 | |
|  *	along with this program; if not, write to the Free Software
 | |
|  *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 | |
|  *
 | |
|  *
 | |
|  * Reference:
 | |
|  *
 | |
|  * $Id$
 | |
|  */
 | |
| 
 | |
| #include <stdio.h>
 | |
| #include "flash.h"
 | |
| #include "jedec.h"
 | |
| 
 | |
| int probe_jedec(struct flashchip *flash)
 | |
| {
 | |
| 	volatile unsigned char *bios = flash->virt_addr;
 | |
| 	unsigned char id1, id2;
 | |
| 
 | |
| 	/* Issue JEDEC Product ID Entry command */
 | |
| 	*(volatile char *) (bios + 0x5555) = 0xAA;
 | |
| 	myusec_delay(10);
 | |
| 	*(volatile char *) (bios + 0x2AAA) = 0x55;
 | |
| 	myusec_delay(10);
 | |
| 	*(volatile char *) (bios + 0x5555) = 0x90;
 | |
| 	myusec_delay(10);
 | |
| 
 | |
| 	/* Read product ID */
 | |
| 	id1 = *(volatile unsigned char *) bios;
 | |
| 	id2 = *(volatile unsigned char *) (bios + 0x01);
 | |
| 
 | |
| 	/* Issue JEDEC Product ID Exit command */
 | |
| 	*(volatile char *) (bios + 0x5555) = 0xAA;
 | |
| 	myusec_delay(10);
 | |
| 	*(volatile char *) (bios + 0x2AAA) = 0x55;
 | |
| 	myusec_delay(10);
 | |
| 	*(volatile char *) (bios + 0x5555) = 0xF0;
 | |
| 	myusec_delay(10);
 | |
| 
 | |
| 	printf("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, id1, id2);
 | |
| 	if (id1 == flash->manufacture_id && id2 == flash->model_id)
 | |
| 		return 1;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int erase_sector_jedec(volatile unsigned char *bios, unsigned int page)
 | |
| {
 | |
| 	volatile unsigned char *Temp;
 | |
| 
 | |
| 	/*  Issue the Sector Erase command   */
 | |
| 	Temp = bios + 0x5555;	/* set up address to be BASE:5555h      */
 | |
| 	*Temp = 0xAA;		/* write data 0xAA to the address       */
 | |
| 	myusec_delay(10);
 | |
| 	Temp = bios + 0x2AAA;	/* set up address to be BASE:2AAAh      */
 | |
| 	*Temp = 0x55;		/* write data 0x55 to the address       */
 | |
| 	myusec_delay(10);
 | |
| 	Temp = bios + 0x5555;	/* set up address to be BASE:5555h      */
 | |
| 	*Temp = 0x80;		/* write data 0x80 to the address       */
 | |
| 	myusec_delay(10);
 | |
| 	Temp = bios + 0x5555;	/* set up address to be BASE:5555h      */
 | |
| 	*Temp = 0xAA;		/* write data 0xAA to the address       */
 | |
| 	myusec_delay(10);
 | |
| 	Temp = bios + 0x2AAA;	/* set up address to be BASE:2AAAh      */
 | |
| 	*Temp = 0x55;		/* write data 0x55 to the address       */
 | |
| 	myusec_delay(10);
 | |
| 	Temp = bios + page;	/* set up address to be the current sector */
 | |
| 	*Temp = 0x30;		/* write data 0x30 to the address       */
 | |
| 	myusec_delay(10);
 | |
| 
 | |
| 	/* wait for Toggle bit ready         */
 | |
| 	toggle_ready_jedec(bios);
 | |
| 
 | |
| 	return (0);
 | |
| }
 | |
| int erase_block_jedec(volatile unsigned char *bios, unsigned int block)
 | |
| {
 | |
| 	volatile unsigned char *Temp;
 | |
| 
 | |
| 	/*  Issue the Sector Erase command   */
 | |
| 	Temp = bios + 0x5555;	/* set up address to be BASE:5555h      */
 | |
| 	*Temp = 0xAA;		/* write data 0xAA to the address       */
 | |
| 	myusec_delay(10);
 | |
| 	Temp = bios + 0x2AAA;	/* set up address to be BASE:2AAAh      */
 | |
| 	*Temp = 0x55;		/* write data 0x55 to the address       */
 | |
| 	myusec_delay(10);
 | |
| 	Temp = bios + 0x5555;	/* set up address to be BASE:5555h      */
 | |
| 	*Temp = 0x80;		/* write data 0x80 to the address       */
 | |
| 	myusec_delay(10);
 | |
| 	Temp = bios + 0x5555;	/* set up address to be BASE:5555h      */
 | |
| 	*Temp = 0xAA;		/* write data 0xAA to the address       */
 | |
| 	myusec_delay(10);
 | |
| 	Temp = bios + 0x2AAA;	/* set up address to be BASE:2AAAh      */
 | |
| 	*Temp = 0x55;		/* write data 0x55 to the address       */
 | |
| 	myusec_delay(10);
 | |
| 	Temp = bios + block;	/* set up address to be the current sector */
 | |
| 	*Temp = 0x50;		/* write data 0x30 to the address       */
 | |
| 	myusec_delay(10);
 | |
| 
 | |
| 	/* wait for Toggle bit ready         */
 | |
| 	toggle_ready_jedec(bios);
 | |
| 
 | |
| 	return (0);
 | |
| }
 | |
| 
 | |
| int erase_chip_jedec(struct flashchip *flash)
 | |
| {
 | |
| 	volatile unsigned char *bios = flash->virt_addr;
 | |
| 	volatile unsigned char *Temp;
 | |
| 
 | |
| 	/*  Issue the JEDEC Chip Erase command   */
 | |
| 	Temp = bios + 0x5555;	/* set up address to be BASE:5555h      */
 | |
| 	*Temp = 0xAA;		/* write data 0xAA to the address       */
 | |
| 	myusec_delay(10);
 | |
| 	Temp = bios + 0x2AAA;	/* set up address to be BASE:2AAAh      */
 | |
| 	*Temp = 0x55;		/* write data 0x55 to the address       */
 | |
| 	myusec_delay(10);
 | |
| 	Temp = bios + 0x5555;	/* set up address to be BASE:5555h      */
 | |
| 	*Temp = 0x80;		/* write data 0x80 to the address       */
 | |
| 	myusec_delay(10);
 | |
| 	Temp = bios + 0x5555;	/* set up address to be BASE:5555h      */
 | |
| 	*Temp = 0xAA;		/* write data 0xAA to the address       */
 | |
| 	myusec_delay(10);
 | |
| 	Temp = bios + 0x2AAA;	/* set up address to be BASE:2AAAh      */
 | |
| 	*Temp = 0x55;		/* write data 0x55 to the address       */
 | |
| 	myusec_delay(10);
 | |
| 	Temp = bios + 0x5555;	/* set up address to be BASEy:5555h     */
 | |
| 	*Temp = 0x10;		/* write data 0x10 to the address       */
 | |
| 	myusec_delay(10);
 | |
| 
 | |
| 	toggle_ready_jedec(bios);
 | |
| 
 | |
| 	return (0);
 | |
| }
 | |
| 
 | |
| void write_page_write_jedec(volatile unsigned char *bios, unsigned char *src,
 | |
| 			    volatile unsigned char *dst, int page_size)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	/* Issue JEDEC Data Unprotect comand */
 | |
| 	*(volatile char *) (bios + 0x5555) = 0xAA;
 | |
| 	*(volatile char *) (bios + 0x2AAA) = 0x55;
 | |
| 	*(volatile char *) (bios + 0x5555) = 0xA0;
 | |
| 
 | |
| 	for (i = 0; i < page_size; i++) {
 | |
| 		/* transfer data from source to destination */
 | |
| 		*dst++ = *src++;
 | |
| 	}
 | |
| 
 | |
| 	usleep(100);
 | |
| 	toggle_ready_jedec(dst - 1);
 | |
| }
 | |
| 
 | |
| int write_byte_program_jedec(volatile unsigned char *bios, unsigned char *src,
 | |
| 			     volatile unsigned char *dst)
 | |
| {
 | |
| 	volatile unsigned char *Temp;
 | |
| 
 | |
| 	/* transfer data from source to destination */
 | |
| 	if (*src == 0xFF) {
 | |
| 		/* If the data is 0xFF, don't program it */
 | |
| 		return 0;
 | |
| 	}
 | |
| 	/* Issue JEDEC Byte Program command */
 | |
| 	Temp = bios + 0x5555;
 | |
| 	*Temp = 0xAA;
 | |
| 	Temp = bios + 0x2AAA;
 | |
| 	*Temp = 0x55;
 | |
| 	Temp = bios + 0x5555;
 | |
| 	*Temp = 0xA0;
 | |
| 	*dst = *src;
 | |
| 	toggle_ready_jedec(bios);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int write_sector_jedec(volatile unsigned char *bios, unsigned char *src,
 | |
| 		       volatile unsigned char *dst, unsigned int page_size)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < page_size; i++) {
 | |
| 		write_byte_program_jedec(bios, src, dst);
 | |
| 		dst++, src++;
 | |
| 	}
 | |
| 
 | |
| 	return (0);
 | |
| }
 | |
| 
 | |
| int write_jedec(struct flashchip *flash, unsigned char *buf)
 | |
| {
 | |
| 	int i;
 | |
| 	int total_size = flash->total_size * 1024;
 | |
| 	int page_size = flash->page_size;
 | |
| 	volatile unsigned char *bios = flash->virt_addr;
 | |
| 
 | |
| 	erase_chip_jedec(flash);
 | |
| 	if (*bios != (unsigned char) 0xff) {
 | |
| 		printf("ERASE FAILED\n");
 | |
| 		return -1;
 | |
| 	}
 | |
| 	printf("Programming Page: ");
 | |
| 	for (i = 0; i < total_size / page_size; i++) {
 | |
| 		printf("%04d at address: 0x%08x", i, i * page_size);
 | |
| 		write_page_write_jedec(bios, buf + i * page_size,
 | |
| 				       bios + i * page_size, page_size);
 | |
| 		printf("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b");
 | |
| 	}
 | |
| 	printf("\n");
 | |
| 	protect_jedec(bios);
 | |
| 
 | |
| 	return (0);
 | |
| }
 |