8fa90ec274
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5823 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
104 lines
4.0 KiB
C
104 lines
4.0 KiB
C
/*
|
|
* This file is part of the coreboot project.
|
|
*
|
|
* Copyright (C) 2007 Nikolay Petukhov <nikolay.petukhov@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <arch/pirq_routing.h>
|
|
|
|
#define IRQ_BITMAP_LINK0 0x0800 /* chipset's INTA# input should be routed to IRQ11 */
|
|
#define IRQ_BITMAP_LINK1 0x0400 /* chipset's INTB# input should be routed to IRQ10 */
|
|
#define IRQ_BITMAP_LINK2 0x0000 /* chipset's INTC# input should be routed to nothing (disabled) */
|
|
#define IRQ_BITMAP_LINK3 0x0000 /* chipset's INTD# input should be routed to nothing (disabled) */
|
|
|
|
const struct irq_routing_table intel_irq_routing_table = {
|
|
PIRQ_SIGNATURE, /* u32 signature */
|
|
PIRQ_VERSION, /* u16 version */
|
|
32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be a total of CONFIG_IRQ_SLOT_COUNT devices on the bus */
|
|
0x00, /* Where the interrupt router lies (bus) */
|
|
(0x12<<3)|0x0, /* Where the interrupt router lies (dev) */
|
|
0xc00, /* IRQs devoted exclusively to PCI usage */
|
|
0x1078, /* Vendor */
|
|
0x2, /* Device */
|
|
0, /* Miniport data */
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
|
|
0x57, /* u8 checksum. This has to be set to some
|
|
value that would give 0 after the sum of all
|
|
bytes for this structure (including checksum) */
|
|
|
|
.slots = {
|
|
[0] = {
|
|
.slot = 0x0, /* should be 0 when it is no real slot. My device is soldered */
|
|
.bus = 0x00,
|
|
.devfn = (0x13<<3)|0x0, /* 0x13 is my USB OHCI */
|
|
.irq = {
|
|
[0] = { /* <-- 0 means this is INTA# output from the device or slot */
|
|
.link = 0x01, /* 0x01 means its connected to INTA# input at chipset */
|
|
.bitmap = IRQ_BITMAP_LINK0
|
|
},
|
|
[1] = { /* <-- 1 means this is INTB# output from the device or slot */
|
|
.link = 0x02, /* 0x02 means its connected to INTB# input at chipset */
|
|
.bitmap = IRQ_BITMAP_LINK1
|
|
},
|
|
[2] = { /* <-- 2 means this is INTC# output from the device or slot */
|
|
.link = 0x03, /* 0x03 means its connected to INTC# input at chipset */
|
|
.bitmap = IRQ_BITMAP_LINK2
|
|
},
|
|
[3] = { /* <-- 3 means this is INTD# output from the device or slot */
|
|
.link = 0x04, /* 0x04 means its connected to INTD# input at chipset */
|
|
.bitmap = IRQ_BITMAP_LINK3
|
|
}
|
|
}
|
|
},
|
|
|
|
[1] = {
|
|
.slot = 0x0, /* means also "on board" */
|
|
.bus = 0x00,
|
|
.devfn = (0x0e<<3)|0x0, /* 0x0e is my Realtek Network device */
|
|
.irq = {
|
|
[0] = { /* <-- 0 means this is INTA# output from the device or slot */
|
|
.link = 0x02, /* 0x02 means its connected to INTB# input at chipset */
|
|
.bitmap = IRQ_BITMAP_LINK1
|
|
},
|
|
[1] = { /* <-- 1 means this is INTB# output from the device or slot */
|
|
.link = 0x03, /* 0x03 means its connected to INTC# input at chipset */
|
|
.bitmap = IRQ_BITMAP_LINK2
|
|
},
|
|
[2] = { /* <-- 2 means this is INTC# output from the device or slot */
|
|
.link = 0x04, /* 0x04 means its connected to INTD# input at chipset */
|
|
.bitmap = IRQ_BITMAP_LINK3
|
|
},
|
|
[3] = { /* <-- 3 means this is INTD# output from the device or slot */
|
|
.link = 0x01, /* 0x01 means its connected to INTA# input at chipset */
|
|
.bitmap = IRQ_BITMAP_LINK0
|
|
}
|
|
}
|
|
}
|
|
}
|
|
};
|
|
|
|
/**
|
|
* Copy the IRQ routing table to memory.
|
|
*
|
|
* @param addr Destination address (between 0xF0000...0x100000).
|
|
* @return The end address of the pirq routing table in memory.
|
|
*/
|
|
unsigned long write_pirq_routing_table(unsigned long addr)
|
|
{
|
|
return copy_pirq_routing_table(addr);
|
|
}
|