This change uses a static 8-bit counter in `acpi_device_add_power_res()` to generate the name of power resource object rather using a default name "PRIC". This makes it easier to identify which power resource Linux kernel logs are referring to. If more than 256 power resources are used in the system, then the counter will wrap around to 0. However, 256 seems to be a large enough number for the power resource count. TEST=Verified that Power Resources are named as expected: ``` dmesg | grep ACPI | grep PR [ 0.550921] ACPI: Power Resource [PR00] (on) [ 0.869960] ACPI: Power Resource [PR01] (on) [ 1.013973] ACPI: Power Resource [PR02] (on) ``` No new ACPI errors are seen in dmesg on brya. Change-Id: Ia18f7177b03821ce0f8c989ae5d258f2f83517a5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
1173 lines
28 KiB
C
1173 lines
28 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
|
|
#include <assert.h>
|
|
#include <string.h>
|
|
#include <acpi/acpi.h>
|
|
#include <acpi/acpi_device.h>
|
|
#include <acpi/acpigen.h>
|
|
#include <acpi/acpigen_pci.h>
|
|
#include <device/device.h>
|
|
#include <device/path.h>
|
|
#include <stdlib.h>
|
|
#include <types.h>
|
|
#include <crc_byte.h>
|
|
|
|
#if CONFIG(GENERIC_GPIO_LIB)
|
|
#include <gpio.h>
|
|
#endif
|
|
|
|
#define ACPI_DP_UUID "daffd814-6eba-4d8c-8a91-bc9bbf4aa301"
|
|
#define ACPI_DP_CHILD_UUID "dbb8e3e6-5886-4ba6-8795-1319f52a966b"
|
|
|
|
/* Write empty word value and return pointer to it */
|
|
static void *acpi_device_write_zero_len(void)
|
|
{
|
|
char *p = acpigen_get_current();
|
|
acpigen_emit_word(0);
|
|
return p;
|
|
}
|
|
|
|
/* Fill in length value from start to current at specified location */
|
|
static void acpi_device_fill_from_len(char *ptr, char *start)
|
|
{
|
|
uint16_t len = acpigen_get_current() - start;
|
|
ptr[0] = len & 0xff;
|
|
ptr[1] = (len >> 8) & 0xff;
|
|
}
|
|
|
|
/*
|
|
* Fill in the length field with the value calculated from after
|
|
* the 16bit field to acpigen current as this length value does
|
|
* not include the length field itself.
|
|
*/
|
|
static void acpi_device_fill_len(void *ptr)
|
|
{
|
|
acpi_device_fill_from_len(ptr, ptr + sizeof(uint16_t));
|
|
}
|
|
|
|
/* Locate and return the ACPI name for this device */
|
|
const char *acpi_device_name(const struct device *dev)
|
|
{
|
|
const struct device *pdev = dev;
|
|
const char *name = NULL;
|
|
|
|
if (!dev)
|
|
return NULL;
|
|
|
|
/* Check for device specific handler */
|
|
if (dev->ops && dev->ops->acpi_name)
|
|
return dev->ops->acpi_name(dev);
|
|
|
|
/* Walk up the tree to find if any parent can identify this device */
|
|
while (pdev->bus) {
|
|
pdev = pdev->bus->dev;
|
|
if (!pdev)
|
|
break;
|
|
if (pdev->path.type == DEVICE_PATH_ROOT)
|
|
break;
|
|
if (pdev->ops && pdev->ops->acpi_name)
|
|
name = pdev->ops->acpi_name(dev);
|
|
if (name)
|
|
return name;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/* Locate and return the ACPI _HID (Hardware ID) for this device */
|
|
const char *acpi_device_hid(const struct device *dev)
|
|
{
|
|
if (!dev)
|
|
return NULL;
|
|
|
|
/* Check for device specific handler */
|
|
if (dev->ops->acpi_hid)
|
|
return dev->ops->acpi_hid(dev);
|
|
|
|
/*
|
|
* Don't walk up the tree to find any parent that can identify this device, as
|
|
* PNP devices are hard to identify.
|
|
*/
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* Generate unique ID based on the ACPI path.
|
|
* Collisions on the same _HID are possible but very unlikely.
|
|
*/
|
|
uint32_t acpi_device_uid(const struct device *dev)
|
|
{
|
|
const char *path = acpi_device_path(dev);
|
|
if (!path)
|
|
return 0;
|
|
|
|
return CRC(path, strlen(path), crc32_byte);
|
|
}
|
|
|
|
/* Recursive function to find the root device and print a path from there */
|
|
static ssize_t acpi_device_path_fill(const struct device *dev, char *buf,
|
|
size_t buf_len, size_t cur)
|
|
{
|
|
const char *name = acpi_device_name(dev);
|
|
ssize_t next = 0;
|
|
|
|
if (!name)
|
|
return -1;
|
|
|
|
/*
|
|
* Make sure this name segment will fit, including the path segment
|
|
* separator and possible NUL terminator if this is the last segment.
|
|
*/
|
|
if (!dev || (cur + strlen(name) + 2) > buf_len)
|
|
return cur;
|
|
|
|
/* Walk up the tree to the root device */
|
|
if (dev->path.type != DEVICE_PATH_ROOT && dev->bus && dev->bus->dev)
|
|
next = acpi_device_path_fill(dev->bus->dev, buf, buf_len, cur);
|
|
if (next < 0)
|
|
return next;
|
|
|
|
/* Fill in the path from the root device */
|
|
next += snprintf(buf + next, buf_len - next, "%s%s",
|
|
(dev->path.type == DEVICE_PATH_ROOT
|
|
|| (strlen(name) == 0)) ?
|
|
"" : ".", name);
|
|
|
|
return next;
|
|
}
|
|
|
|
/*
|
|
* Warning: just as with dev_path() this uses a static buffer
|
|
* so should not be called mulitple times in one statement
|
|
*/
|
|
const char *acpi_device_path(const struct device *dev)
|
|
{
|
|
static char buf[DEVICE_PATH_MAX] = {};
|
|
|
|
if (!dev)
|
|
return NULL;
|
|
|
|
if (acpi_device_path_fill(dev, buf, sizeof(buf), 0) <= 0)
|
|
return NULL;
|
|
|
|
return buf;
|
|
}
|
|
|
|
/* Return the path of the parent device as the ACPI Scope for this device */
|
|
const char *acpi_device_scope(const struct device *dev)
|
|
{
|
|
static char buf[DEVICE_PATH_MAX] = {};
|
|
|
|
if (!dev || !dev->bus || !dev->bus->dev)
|
|
return NULL;
|
|
|
|
if (acpi_device_path_fill(dev->bus->dev, buf, sizeof(buf), 0) <= 0)
|
|
return NULL;
|
|
|
|
return buf;
|
|
}
|
|
|
|
/* Concatenate the device path and provided name suffix */
|
|
const char *acpi_device_path_join(const struct device *dev, const char *name)
|
|
{
|
|
static char buf[DEVICE_PATH_MAX] = {};
|
|
ssize_t len;
|
|
|
|
if (!dev)
|
|
return NULL;
|
|
|
|
/* Build the path of this device */
|
|
len = acpi_device_path_fill(dev, buf, sizeof(buf), 0);
|
|
if (len <= 0)
|
|
return NULL;
|
|
|
|
/* Ensure there is room for the added name, separator, and NUL */
|
|
if ((len + strlen(name) + 2) > sizeof(buf))
|
|
return NULL;
|
|
snprintf(buf + len, sizeof(buf) - len, ".%s", name);
|
|
|
|
return buf;
|
|
}
|
|
|
|
int acpi_device_status(const struct device *dev)
|
|
{
|
|
if (!dev->enabled)
|
|
return ACPI_STATUS_DEVICE_ALL_OFF;
|
|
if (dev->hidden)
|
|
return ACPI_STATUS_DEVICE_HIDDEN_ON;
|
|
return ACPI_STATUS_DEVICE_ALL_ON;
|
|
}
|
|
|
|
/* Write the unique _UID based on ACPI device path. */
|
|
void acpi_device_write_uid(const struct device *dev)
|
|
{
|
|
acpigen_write_name_integer("_UID", acpi_device_uid(dev));
|
|
}
|
|
|
|
/* ACPI 6.1 section 6.4.3.6: Extended Interrupt Descriptor */
|
|
void acpi_device_write_interrupt(const struct acpi_irq *irq)
|
|
{
|
|
void *desc_length;
|
|
uint8_t flags;
|
|
|
|
if (!irq || !irq->pin)
|
|
return;
|
|
|
|
/* This is supported by GpioInt() but not Interrupt() */
|
|
if (irq->polarity == ACPI_IRQ_ACTIVE_BOTH)
|
|
return;
|
|
|
|
/* Byte 0: Descriptor Type */
|
|
acpigen_emit_byte(ACPI_DESCRIPTOR_INTERRUPT);
|
|
|
|
/* Byte 1-2: Length (filled in later) */
|
|
desc_length = acpi_device_write_zero_len();
|
|
|
|
/*
|
|
* Byte 3: Flags
|
|
* [7:5]: Reserved
|
|
* [4]: Wake (0=NO_WAKE 1=WAKE)
|
|
* [3]: Sharing (0=EXCLUSIVE 1=SHARED)
|
|
* [2]: Polarity (0=HIGH 1=LOW)
|
|
* [1]: Mode (0=LEVEL 1=EDGE)
|
|
* [0]: Resource (0=PRODUCER 1=CONSUMER)
|
|
*/
|
|
flags = 1 << 0; /* ResourceConsumer */
|
|
if (irq->mode == ACPI_IRQ_EDGE_TRIGGERED)
|
|
flags |= 1 << 1;
|
|
if (irq->polarity == ACPI_IRQ_ACTIVE_LOW)
|
|
flags |= 1 << 2;
|
|
if (irq->shared == ACPI_IRQ_SHARED)
|
|
flags |= 1 << 3;
|
|
if (irq->wake == ACPI_IRQ_WAKE)
|
|
flags |= 1 << 4;
|
|
acpigen_emit_byte(flags);
|
|
|
|
/* Byte 4: Interrupt Table Entry Count */
|
|
acpigen_emit_byte(1);
|
|
|
|
/* Byte 5-8: Interrupt Number */
|
|
acpigen_emit_dword(irq->pin);
|
|
|
|
/* Fill in Descriptor Length (account for len word) */
|
|
acpi_device_fill_len(desc_length);
|
|
}
|
|
|
|
/* ACPI 6.1 section 6.4.3.8.1 - GPIO Interrupt or I/O */
|
|
void acpi_device_write_gpio(const struct acpi_gpio *gpio)
|
|
{
|
|
void *start, *desc_length;
|
|
void *pin_table_offset, *vendor_data_offset, *resource_offset;
|
|
uint16_t flags = 0;
|
|
int pin;
|
|
|
|
if (!gpio || gpio->type > ACPI_GPIO_TYPE_IO)
|
|
return;
|
|
|
|
start = acpigen_get_current();
|
|
|
|
/* Byte 0: Descriptor Type */
|
|
acpigen_emit_byte(ACPI_DESCRIPTOR_GPIO);
|
|
|
|
/* Byte 1-2: Length (fill in later) */
|
|
desc_length = acpi_device_write_zero_len();
|
|
|
|
/* Byte 3: Revision ID */
|
|
acpigen_emit_byte(ACPI_GPIO_REVISION_ID);
|
|
|
|
/* Byte 4: GpioIo or GpioInt */
|
|
acpigen_emit_byte(gpio->type);
|
|
|
|
/*
|
|
* Byte 5-6: General Flags
|
|
* [15:1]: 0 => Reserved
|
|
* [0]: 1 => ResourceConsumer
|
|
*/
|
|
acpigen_emit_word(1 << 0);
|
|
|
|
switch (gpio->type) {
|
|
case ACPI_GPIO_TYPE_INTERRUPT:
|
|
/*
|
|
* Byte 7-8: GPIO Interrupt Flags
|
|
* [15:5]: 0 => Reserved
|
|
* [4]: Wake (0=NO_WAKE 1=WAKE)
|
|
* [3]: Sharing (0=EXCLUSIVE 1=SHARED)
|
|
* [2:1]: Polarity (0=HIGH 1=LOW 2=BOTH)
|
|
* [0]: Mode (0=LEVEL 1=EDGE)
|
|
*/
|
|
if (gpio->irq.mode == ACPI_IRQ_EDGE_TRIGGERED)
|
|
flags |= 1 << 0;
|
|
if (gpio->irq.shared == ACPI_IRQ_SHARED)
|
|
flags |= 1 << 3;
|
|
if (gpio->irq.wake == ACPI_IRQ_WAKE)
|
|
flags |= 1 << 4;
|
|
|
|
switch (gpio->irq.polarity) {
|
|
case ACPI_IRQ_ACTIVE_HIGH:
|
|
flags |= 0 << 1;
|
|
break;
|
|
case ACPI_IRQ_ACTIVE_LOW:
|
|
flags |= 1 << 1;
|
|
break;
|
|
case ACPI_IRQ_ACTIVE_BOTH:
|
|
flags |= 2 << 1;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case ACPI_GPIO_TYPE_IO:
|
|
/*
|
|
* Byte 7-8: GPIO IO Flags
|
|
* [15:4]: 0 => Reserved
|
|
* [3]: Sharing (0=EXCLUSIVE 1=SHARED)
|
|
* [2]: 0 => Reserved
|
|
* [1:0]: IO Restriction
|
|
* 0 => IoRestrictionNone
|
|
* 1 => IoRestrictionInputOnly
|
|
* 2 => IoRestrictionOutputOnly
|
|
* 3 => IoRestrictionNoneAndPreserve
|
|
*/
|
|
flags |= gpio->io_restrict & 3;
|
|
if (gpio->io_shared)
|
|
flags |= 1 << 3;
|
|
break;
|
|
}
|
|
acpigen_emit_word(flags);
|
|
|
|
/*
|
|
* Byte 9: Pin Configuration
|
|
* 0x01 => Default (no configuration applied)
|
|
* 0x02 => Pull-up
|
|
* 0x03 => Pull-down
|
|
* 0x04-0x7F => Reserved
|
|
* 0x80-0xff => Vendor defined
|
|
*/
|
|
acpigen_emit_byte(gpio->pull);
|
|
|
|
/* Byte 10-11: Output Drive Strength in 1/100 mA */
|
|
acpigen_emit_word(gpio->output_drive_strength);
|
|
|
|
/* Byte 12-13: Debounce Timeout in 1/100 ms */
|
|
acpigen_emit_word(gpio->interrupt_debounce_timeout);
|
|
|
|
/* Byte 14-15: Pin Table Offset, relative to start */
|
|
pin_table_offset = acpi_device_write_zero_len();
|
|
|
|
/* Byte 16: Reserved */
|
|
acpigen_emit_byte(0);
|
|
|
|
/* Byte 17-18: Resource Source Name Offset, relative to start */
|
|
resource_offset = acpi_device_write_zero_len();
|
|
|
|
/* Byte 19-20: Vendor Data Offset, relative to start */
|
|
vendor_data_offset = acpi_device_write_zero_len();
|
|
|
|
/* Byte 21-22: Vendor Data Length */
|
|
acpigen_emit_word(0);
|
|
|
|
/* Fill in Pin Table Offset */
|
|
acpi_device_fill_from_len(pin_table_offset, start);
|
|
|
|
/* Pin Table, one word for each pin */
|
|
for (pin = 0; pin < gpio->pin_count; pin++) {
|
|
uint16_t acpi_pin = gpio->pins[pin];
|
|
#if CONFIG(GENERIC_GPIO_LIB)
|
|
acpi_pin = gpio_acpi_pin(acpi_pin);
|
|
#endif
|
|
acpigen_emit_word(acpi_pin);
|
|
}
|
|
|
|
/* Fill in Resource Source Name Offset */
|
|
acpi_device_fill_from_len(resource_offset, start);
|
|
|
|
/* Resource Source Name String */
|
|
#if CONFIG(GENERIC_GPIO_LIB)
|
|
acpigen_emit_string(gpio->resource ? : gpio_acpi_path(gpio->pins[0]));
|
|
#else
|
|
acpigen_emit_string(gpio->resource);
|
|
#endif
|
|
|
|
/* Fill in Vendor Data Offset */
|
|
acpi_device_fill_from_len(vendor_data_offset, start);
|
|
|
|
/* Fill in GPIO Descriptor Length (account for len word) */
|
|
acpi_device_fill_len(desc_length);
|
|
}
|
|
|
|
/* ACPI 6.1 section 6.4.3.8.2.1 - I2cSerialBus() */
|
|
void acpi_device_write_i2c(const struct acpi_i2c *i2c)
|
|
{
|
|
void *desc_length, *type_length;
|
|
|
|
/* Byte 0: Descriptor Type */
|
|
acpigen_emit_byte(ACPI_DESCRIPTOR_SERIAL_BUS);
|
|
|
|
/* Byte 1+2: Length (filled in later) */
|
|
desc_length = acpi_device_write_zero_len();
|
|
|
|
/* Byte 3: Revision ID */
|
|
acpigen_emit_byte(ACPI_I2C_SERIAL_BUS_REVISION_ID);
|
|
|
|
/* Byte 4: Resource Source Index is Reserved */
|
|
acpigen_emit_byte(0);
|
|
|
|
/* Byte 5: Serial Bus Type is I2C */
|
|
acpigen_emit_byte(ACPI_SERIAL_BUS_TYPE_I2C);
|
|
|
|
/*
|
|
* Byte 6: Flags
|
|
* [7:2]: 0 => Reserved
|
|
* [1]: 1 => ResourceConsumer
|
|
* [0]: 0 => ControllerInitiated
|
|
*/
|
|
acpigen_emit_byte(1 << 1);
|
|
|
|
/*
|
|
* Byte 7-8: Type Specific Flags
|
|
* [15:1]: 0 => Reserved
|
|
* [0]: 0 => 7bit, 1 => 10bit
|
|
*/
|
|
acpigen_emit_word(i2c->mode_10bit);
|
|
|
|
/* Byte 9: Type Specific Revision ID */
|
|
acpigen_emit_byte(ACPI_I2C_TYPE_SPECIFIC_REVISION_ID);
|
|
|
|
/* Byte 10-11: I2C Type Data Length */
|
|
type_length = acpi_device_write_zero_len();
|
|
|
|
/* Byte 12-15: I2C Bus Speed */
|
|
acpigen_emit_dword(i2c->speed);
|
|
|
|
/* Byte 16-17: I2C Slave Address */
|
|
acpigen_emit_word(i2c->address);
|
|
|
|
/* Fill in Type Data Length */
|
|
acpi_device_fill_len(type_length);
|
|
|
|
/* Byte 18+: ResourceSource */
|
|
acpigen_emit_string(i2c->resource);
|
|
|
|
/* Fill in I2C Descriptor Length */
|
|
acpi_device_fill_len(desc_length);
|
|
}
|
|
|
|
/* ACPI 6.1 section 6.4.3.8.2.2 - SpiSerialBus() */
|
|
void acpi_device_write_spi(const struct acpi_spi *spi)
|
|
{
|
|
void *desc_length, *type_length;
|
|
uint16_t flags = 0;
|
|
|
|
/* Byte 0: Descriptor Type */
|
|
acpigen_emit_byte(ACPI_DESCRIPTOR_SERIAL_BUS);
|
|
|
|
/* Byte 1+2: Length (filled in later) */
|
|
desc_length = acpi_device_write_zero_len();
|
|
|
|
/* Byte 3: Revision ID */
|
|
acpigen_emit_byte(ACPI_SPI_SERIAL_BUS_REVISION_ID);
|
|
|
|
/* Byte 4: Resource Source Index is Reserved */
|
|
acpigen_emit_byte(0);
|
|
|
|
/* Byte 5: Serial Bus Type is SPI */
|
|
acpigen_emit_byte(ACPI_SERIAL_BUS_TYPE_SPI);
|
|
|
|
/*
|
|
* Byte 6: Flags
|
|
* [7:2]: 0 => Reserved
|
|
* [1]: 1 => ResourceConsumer
|
|
* [0]: 0 => ControllerInitiated
|
|
*/
|
|
acpigen_emit_byte(1 << 1);
|
|
|
|
/*
|
|
* Byte 7-8: Type Specific Flags
|
|
* [15:2]: 0 => Reserved
|
|
* [1]: 0 => ActiveLow, 1 => ActiveHigh
|
|
* [0]: 0 => FourWire, 1 => ThreeWire
|
|
*/
|
|
if (spi->wire_mode == SPI_3_WIRE_MODE)
|
|
flags |= 1 << 0;
|
|
if (spi->device_select_polarity == SPI_POLARITY_HIGH)
|
|
flags |= 1 << 1;
|
|
acpigen_emit_word(flags);
|
|
|
|
/* Byte 9: Type Specific Revision ID */
|
|
acpigen_emit_byte(ACPI_SPI_TYPE_SPECIFIC_REVISION_ID);
|
|
|
|
/* Byte 10-11: SPI Type Data Length */
|
|
type_length = acpi_device_write_zero_len();
|
|
|
|
/* Byte 12-15: Connection Speed */
|
|
acpigen_emit_dword(spi->speed);
|
|
|
|
/* Byte 16: Data Bit Length */
|
|
acpigen_emit_byte(spi->data_bit_length);
|
|
|
|
/* Byte 17: Clock Phase */
|
|
acpigen_emit_byte(spi->clock_phase);
|
|
|
|
/* Byte 18: Clock Polarity */
|
|
acpigen_emit_byte(spi->clock_polarity);
|
|
|
|
/* Byte 19-20: Device Selection */
|
|
acpigen_emit_word(spi->device_select);
|
|
|
|
/* Fill in Type Data Length */
|
|
acpi_device_fill_len(type_length);
|
|
|
|
/* Byte 21+: ResourceSource String */
|
|
acpigen_emit_string(spi->resource);
|
|
|
|
/* Fill in SPI Descriptor Length */
|
|
acpi_device_fill_len(desc_length);
|
|
}
|
|
|
|
/* UART Serial Bus - UARTSerialBusV2() */
|
|
void acpi_device_write_uart(const struct acpi_uart *uart)
|
|
{
|
|
void *desc_length, *type_length;
|
|
uint16_t flags;
|
|
|
|
/* Byte 0: Descriptor Type */
|
|
acpigen_emit_byte(ACPI_DESCRIPTOR_SERIAL_BUS);
|
|
|
|
/* Byte 1+2: Length (filled in later) */
|
|
desc_length = acpi_device_write_zero_len();
|
|
|
|
/* Byte 3: Revision ID */
|
|
acpigen_emit_byte(ACPI_UART_SERIAL_BUS_REVISION_ID);
|
|
|
|
/* Byte 4: Resource Source Index is Reserved */
|
|
acpigen_emit_byte(0);
|
|
|
|
/* Byte 5: Serial Bus Type is UART */
|
|
acpigen_emit_byte(ACPI_SERIAL_BUS_TYPE_UART);
|
|
|
|
/*
|
|
* Byte 6: Flags
|
|
* [7:2]: 0 => Reserved
|
|
* [1]: 1 => ResourceConsumer
|
|
* [0]: 0 => ControllerInitiated
|
|
*/
|
|
acpigen_emit_byte(BIT(1));
|
|
|
|
/*
|
|
* Byte 7-8: Type Specific Flags
|
|
* [15:8]: 0 => Reserved
|
|
* [7]: 0 => Little Endian, 1 => Big Endian
|
|
* [6:4]: Data bits
|
|
* [3:2]: Stop bits
|
|
* [1:0]: Flow control
|
|
*/
|
|
flags = uart->flow_control & 3;
|
|
flags |= (uart->stop_bits & 3) << 2;
|
|
flags |= (uart->data_bits & 7) << 4;
|
|
flags |= (uart->endian & 1) << 7;
|
|
acpigen_emit_word(flags);
|
|
|
|
/* Byte 9: Type Specific Revision ID */
|
|
acpigen_emit_byte(ACPI_UART_TYPE_SPECIFIC_REVISION_ID);
|
|
|
|
/* Byte 10-11: Type Data Length */
|
|
type_length = acpi_device_write_zero_len();
|
|
|
|
/* Byte 12-15: Initial Baud Rate */
|
|
acpigen_emit_dword(uart->initial_baud_rate);
|
|
|
|
/* Byte 16-17: RX FIFO size */
|
|
acpigen_emit_word(uart->rx_fifo_bytes);
|
|
|
|
/* Byte 18-19: TX FIFO size */
|
|
acpigen_emit_word(uart->tx_fifo_bytes);
|
|
|
|
/* Byte 20: Parity */
|
|
acpigen_emit_byte(uart->parity);
|
|
|
|
/* Byte 21: Lines Enabled */
|
|
acpigen_emit_byte(uart->lines_in_use);
|
|
|
|
/* Fill in Type Data Length */
|
|
acpi_device_fill_len(type_length);
|
|
|
|
/* Byte 22+: ResourceSource */
|
|
acpigen_emit_string(uart->resource);
|
|
|
|
/* Fill in Descriptor Length */
|
|
acpi_device_fill_len(desc_length);
|
|
}
|
|
|
|
#define ACPI_POWER_RESOURCE_STATUS_ON_OP ONE_OP
|
|
#define ACPI_POWER_RESOURCE_STATUS_OFF_OP ZERO_OP
|
|
|
|
/**
|
|
* Writes an ACPI fragment that will check the GPIO and return 0 if the GPIO
|
|
* state does not match the active parameter.
|
|
*/
|
|
static void acpigen_write_gpio_STA(const struct acpi_gpio *gpio, bool active)
|
|
{
|
|
if (!gpio || !gpio->pin_count)
|
|
return;
|
|
|
|
/* Read current GPIO status into Local0. */
|
|
acpigen_get_tx_gpio(gpio);
|
|
|
|
/*
|
|
* If (!Local0)
|
|
* {
|
|
* Return (Zero)
|
|
* }
|
|
*/
|
|
acpigen_write_if();
|
|
if (active)
|
|
acpigen_emit_byte(LNOT_OP);
|
|
acpigen_emit_byte(LOCAL0_OP);
|
|
acpigen_write_return_op(ACPI_POWER_RESOURCE_STATUS_OFF_OP);
|
|
acpigen_write_if_end();
|
|
}
|
|
|
|
static void acpigen_write_power_res_STA(const struct acpi_power_res_params *params)
|
|
{
|
|
acpigen_write_method_serialized("_STA", 0);
|
|
|
|
/* Verify all the GPIOs are in the ON state, otherwise return 0 */
|
|
acpigen_write_gpio_STA(params->enable_gpio, true);
|
|
acpigen_write_gpio_STA(params->reset_gpio, false);
|
|
acpigen_write_gpio_STA(params->stop_gpio, false);
|
|
|
|
/* All GPIOs are in the ON state */
|
|
acpigen_write_return_op(ACPI_POWER_RESOURCE_STATUS_ON_OP);
|
|
|
|
acpigen_pop_len(); /* Method */
|
|
}
|
|
|
|
/* PowerResource() with Enable and/or Reset control */
|
|
void acpi_device_add_power_res(const struct acpi_power_res_params *params)
|
|
{
|
|
static uint8_t id;
|
|
static const char * const power_res_dev_states[] = { "_PR0", "_PR3" };
|
|
unsigned int reset_gpio = params->reset_gpio ? params->reset_gpio->pins[0] : 0;
|
|
unsigned int enable_gpio = params->enable_gpio ? params->enable_gpio->pins[0] : 0;
|
|
unsigned int stop_gpio = params->stop_gpio ? params->stop_gpio->pins[0] : 0;
|
|
char pr_name[ACPI_NAME_BUFFER_SIZE];
|
|
|
|
if (!reset_gpio && !enable_gpio && !stop_gpio)
|
|
return;
|
|
|
|
snprintf(pr_name, sizeof(pr_name), "PR%02X", id++);
|
|
|
|
/* PowerResource (PR##, 0, 0) */
|
|
acpigen_write_power_res(pr_name, 0, 0, power_res_dev_states,
|
|
ARRAY_SIZE(power_res_dev_states));
|
|
|
|
if (params->use_gpio_for_status) {
|
|
acpigen_write_power_res_STA(params);
|
|
} else {
|
|
/* Method (_STA, 0, NotSerialized) { Return (0x1) } */
|
|
acpigen_write_STA(ACPI_POWER_RESOURCE_STATUS_ON_OP);
|
|
}
|
|
|
|
/* Method (_ON, 0, Serialized) */
|
|
acpigen_write_method_serialized("_ON", 0);
|
|
if (reset_gpio)
|
|
acpigen_enable_tx_gpio(params->reset_gpio);
|
|
if (enable_gpio) {
|
|
acpigen_enable_tx_gpio(params->enable_gpio);
|
|
if (params->enable_delay_ms)
|
|
acpigen_write_sleep(params->enable_delay_ms);
|
|
}
|
|
if (reset_gpio) {
|
|
acpigen_disable_tx_gpio(params->reset_gpio);
|
|
if (params->reset_delay_ms)
|
|
acpigen_write_sleep(params->reset_delay_ms);
|
|
}
|
|
if (stop_gpio) {
|
|
acpigen_disable_tx_gpio(params->stop_gpio);
|
|
if (params->stop_delay_ms)
|
|
acpigen_write_sleep(params->stop_delay_ms);
|
|
}
|
|
acpigen_pop_len(); /* _ON method */
|
|
|
|
/* Method (_OFF, 0, Serialized) */
|
|
acpigen_write_method_serialized("_OFF", 0);
|
|
if (stop_gpio) {
|
|
acpigen_enable_tx_gpio(params->stop_gpio);
|
|
if (params->stop_off_delay_ms)
|
|
acpigen_write_sleep(params->stop_off_delay_ms);
|
|
}
|
|
if (reset_gpio) {
|
|
acpigen_enable_tx_gpio(params->reset_gpio);
|
|
if (params->reset_off_delay_ms)
|
|
acpigen_write_sleep(params->reset_off_delay_ms);
|
|
}
|
|
if (enable_gpio) {
|
|
acpigen_disable_tx_gpio(params->enable_gpio);
|
|
if (params->enable_off_delay_ms)
|
|
acpigen_write_sleep(params->enable_off_delay_ms);
|
|
}
|
|
acpigen_pop_len(); /* _OFF method */
|
|
|
|
acpigen_pop_len(); /* PowerResource PR## */
|
|
}
|
|
|
|
static void acpi_dp_write_array(const struct acpi_dp *array);
|
|
static void acpi_dp_write_value(const struct acpi_dp *prop)
|
|
{
|
|
switch (prop->type) {
|
|
case ACPI_DP_TYPE_INTEGER:
|
|
acpigen_write_integer(prop->integer);
|
|
break;
|
|
case ACPI_DP_TYPE_STRING:
|
|
case ACPI_DP_TYPE_CHILD:
|
|
acpigen_write_string(prop->string);
|
|
break;
|
|
case ACPI_DP_TYPE_REFERENCE:
|
|
acpigen_emit_namestring(prop->string);
|
|
break;
|
|
case ACPI_DP_TYPE_ARRAY:
|
|
acpi_dp_write_array(prop->array);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Package (2) { "prop->name", VALUE } */
|
|
static void acpi_dp_write_property(const struct acpi_dp *prop)
|
|
{
|
|
acpigen_write_package(2);
|
|
acpigen_write_string(prop->name);
|
|
acpi_dp_write_value(prop);
|
|
acpigen_pop_len();
|
|
}
|
|
|
|
/* Write array of Device Properties */
|
|
static void acpi_dp_write_array(const struct acpi_dp *array)
|
|
{
|
|
const struct acpi_dp *dp;
|
|
char *pkg_count;
|
|
|
|
/* Package element count determined as it is populated */
|
|
pkg_count = acpigen_write_package(0);
|
|
|
|
/*
|
|
* Only acpi_dp of type DP_TYPE_TABLE is allowed to be an array.
|
|
* DP_TYPE_TABLE does not have a value to be written. Thus, start
|
|
* the loop from next type in the array.
|
|
*/
|
|
for (dp = array->next; dp; dp = dp->next) {
|
|
acpi_dp_write_value(dp);
|
|
(*pkg_count)++;
|
|
}
|
|
|
|
acpigen_pop_len();
|
|
}
|
|
|
|
static void acpi_dp_free(struct acpi_dp *dp)
|
|
{
|
|
while (dp) {
|
|
struct acpi_dp *p = dp->next;
|
|
|
|
switch (dp->type) {
|
|
case ACPI_DP_TYPE_CHILD:
|
|
acpi_dp_free(dp->child);
|
|
break;
|
|
case ACPI_DP_TYPE_ARRAY:
|
|
acpi_dp_free(dp->array);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
free(dp);
|
|
dp = p;
|
|
}
|
|
}
|
|
|
|
static bool acpi_dp_write_properties(struct acpi_dp *prop, const char *uuid)
|
|
{
|
|
struct acpi_dp *dp;
|
|
char *prop_count = NULL;
|
|
|
|
/* Print base properties */
|
|
for (dp = prop; dp; dp = dp->next) {
|
|
if (dp->type == ACPI_DP_TYPE_TABLE ||
|
|
dp->type == ACPI_DP_TYPE_CHILD ||
|
|
dp->type == ACPI_DP_TYPE_PACKAGE)
|
|
continue;
|
|
|
|
/*
|
|
* The UUID and package is only added when
|
|
* we come across the first property. This
|
|
* is to avoid creating a zero-length package
|
|
* in situations where there are only children.
|
|
*/
|
|
if (!prop_count) {
|
|
/* ToUUID (dp->uuid) */
|
|
acpigen_write_uuid(uuid);
|
|
/*
|
|
* Package (PROP), element count determined as
|
|
* it is populated
|
|
*/
|
|
prop_count = acpigen_write_package(0);
|
|
}
|
|
(*prop_count)++;
|
|
acpi_dp_write_property(dp);
|
|
}
|
|
if (prop_count) {
|
|
/* Package (PROP) length, if a package was written */
|
|
acpigen_pop_len();
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static void acpi_dp_write_(struct acpi_dp *table)
|
|
{
|
|
struct acpi_dp *dp, *prop;
|
|
char *dp_count;
|
|
int child_count = 0;
|
|
|
|
if (!table || table->type != ACPI_DP_TYPE_TABLE || !table->next)
|
|
return;
|
|
|
|
/* Name (name) */
|
|
acpigen_write_name(table->name);
|
|
|
|
/* Device Property list starts with the next entry */
|
|
prop = table->next;
|
|
|
|
/* Package (DP), default to assuming no properties or children */
|
|
dp_count = acpigen_write_package(0);
|
|
|
|
/* Print base properties */
|
|
if (acpi_dp_write_properties(prop, table->uuid))
|
|
*dp_count += 2;
|
|
|
|
/* Count child properties */
|
|
for (dp = prop; dp; dp = dp->next)
|
|
if (dp->type == ACPI_DP_TYPE_CHILD)
|
|
child_count++;
|
|
|
|
/* Add child properties to the base table */
|
|
if (child_count) {
|
|
/* Update DP package count */
|
|
*dp_count += 2;
|
|
/* ToUUID (ACPI_DP_CHILD_UUID) */
|
|
acpigen_write_uuid(ACPI_DP_CHILD_UUID);
|
|
|
|
/* Print child pointer properties */
|
|
acpigen_write_package(child_count);
|
|
|
|
for (dp = prop; dp; dp = dp->next)
|
|
if (dp->type == ACPI_DP_TYPE_CHILD)
|
|
acpi_dp_write_property(dp);
|
|
/* Package (CHILD) length */
|
|
acpigen_pop_len();
|
|
}
|
|
|
|
/* Write packages of properties with unique UUID */
|
|
for (dp = prop; dp; dp = dp->next)
|
|
if (dp->type == ACPI_DP_TYPE_PACKAGE)
|
|
if (acpi_dp_write_properties(dp->child, dp->uuid))
|
|
*dp_count += 2;
|
|
|
|
/* Package (DP) length */
|
|
acpigen_pop_len();
|
|
|
|
/* Recursively parse children into separate tables */
|
|
for (dp = prop; dp; dp = dp->next)
|
|
if (dp->type == ACPI_DP_TYPE_CHILD)
|
|
acpi_dp_write_(dp->child);
|
|
}
|
|
|
|
void acpi_dp_write(struct acpi_dp *table)
|
|
{
|
|
acpi_dp_write_(table);
|
|
|
|
/* Clean up */
|
|
acpi_dp_free(table);
|
|
}
|
|
|
|
static struct acpi_dp *acpi_dp_new(struct acpi_dp *dp, enum acpi_dp_type type,
|
|
const char *name)
|
|
{
|
|
struct acpi_dp *new;
|
|
|
|
new = malloc(sizeof(struct acpi_dp));
|
|
if (!new)
|
|
return NULL;
|
|
|
|
memset(new, 0, sizeof(*new));
|
|
new->type = type;
|
|
new->name = name;
|
|
new->uuid = ACPI_DP_UUID;
|
|
|
|
if (dp) {
|
|
/* Add to end of property list */
|
|
while (dp->next)
|
|
dp = dp->next;
|
|
dp->next = new;
|
|
}
|
|
|
|
return new;
|
|
}
|
|
|
|
struct acpi_dp *acpi_dp_new_table(const char *name)
|
|
{
|
|
return acpi_dp_new(NULL, ACPI_DP_TYPE_TABLE, name);
|
|
}
|
|
|
|
size_t acpi_dp_add_property_list(struct acpi_dp *dp,
|
|
const struct acpi_dp *property_list,
|
|
size_t property_count)
|
|
{
|
|
const struct acpi_dp *prop;
|
|
size_t i, properties_added = 0;
|
|
|
|
if (!dp || !property_list)
|
|
return 0;
|
|
|
|
for (i = 0; i < property_count; i++) {
|
|
prop = &property_list[i];
|
|
|
|
if (prop->type == ACPI_DP_TYPE_UNKNOWN || !prop->name)
|
|
continue;
|
|
|
|
switch (prop->type) {
|
|
case ACPI_DP_TYPE_INTEGER:
|
|
acpi_dp_add_integer(dp, prop->name, prop->integer);
|
|
break;
|
|
case ACPI_DP_TYPE_STRING:
|
|
acpi_dp_add_string(dp, prop->name, prop->string);
|
|
break;
|
|
case ACPI_DP_TYPE_REFERENCE:
|
|
acpi_dp_add_reference(dp, prop->name, prop->string);
|
|
break;
|
|
case ACPI_DP_TYPE_ARRAY:
|
|
acpi_dp_add_array(dp, prop->array);
|
|
break;
|
|
case ACPI_DP_TYPE_CHILD:
|
|
acpi_dp_add_child(dp, prop->name, prop->child);
|
|
break;
|
|
default:
|
|
continue;
|
|
}
|
|
|
|
++properties_added;
|
|
}
|
|
|
|
return properties_added;
|
|
}
|
|
|
|
struct acpi_dp *acpi_dp_add_integer(struct acpi_dp *dp, const char *name,
|
|
uint64_t value)
|
|
{
|
|
if (!dp)
|
|
return NULL;
|
|
|
|
struct acpi_dp *new = acpi_dp_new(dp, ACPI_DP_TYPE_INTEGER, name);
|
|
|
|
if (new)
|
|
new->integer = value;
|
|
|
|
return new;
|
|
}
|
|
|
|
struct acpi_dp *acpi_dp_add_string(struct acpi_dp *dp, const char *name,
|
|
const char *string)
|
|
{
|
|
if (!dp)
|
|
return NULL;
|
|
|
|
struct acpi_dp *new = acpi_dp_new(dp, ACPI_DP_TYPE_STRING, name);
|
|
|
|
if (new)
|
|
new->string = string;
|
|
|
|
return new;
|
|
}
|
|
|
|
struct acpi_dp *acpi_dp_add_reference(struct acpi_dp *dp, const char *name,
|
|
const char *reference)
|
|
{
|
|
if (!dp)
|
|
return NULL;
|
|
|
|
struct acpi_dp *new = acpi_dp_new(dp, ACPI_DP_TYPE_REFERENCE, name);
|
|
|
|
if (new)
|
|
new->string = reference;
|
|
|
|
return new;
|
|
}
|
|
|
|
struct acpi_dp *acpi_dp_add_child(struct acpi_dp *dp, const char *name,
|
|
struct acpi_dp *child)
|
|
{
|
|
struct acpi_dp *new;
|
|
|
|
if (!dp || !child || child->type != ACPI_DP_TYPE_TABLE)
|
|
return NULL;
|
|
|
|
new = acpi_dp_new(dp, ACPI_DP_TYPE_CHILD, name);
|
|
if (new) {
|
|
new->child = child;
|
|
new->string = child->name;
|
|
}
|
|
|
|
return new;
|
|
}
|
|
|
|
struct acpi_dp *acpi_dp_add_package(struct acpi_dp *dp, struct acpi_dp *package)
|
|
{
|
|
struct acpi_dp *new;
|
|
|
|
if (!dp || !package || package->type != ACPI_DP_TYPE_TABLE)
|
|
return NULL;
|
|
|
|
new = acpi_dp_new(dp, ACPI_DP_TYPE_PACKAGE, NULL);
|
|
if (new) {
|
|
new->uuid = package->name;
|
|
new->child = package;
|
|
}
|
|
|
|
return new;
|
|
}
|
|
|
|
struct acpi_dp *acpi_dp_add_array(struct acpi_dp *dp, struct acpi_dp *array)
|
|
{
|
|
struct acpi_dp *new;
|
|
|
|
if (!dp || !array || array->type != ACPI_DP_TYPE_TABLE)
|
|
return NULL;
|
|
|
|
new = acpi_dp_new(dp, ACPI_DP_TYPE_ARRAY, array->name);
|
|
if (new)
|
|
new->array = array;
|
|
|
|
return new;
|
|
}
|
|
|
|
struct acpi_dp *acpi_dp_add_integer_array(struct acpi_dp *dp, const char *name,
|
|
const uint64_t *array, int len)
|
|
{
|
|
struct acpi_dp *dp_array;
|
|
int i;
|
|
|
|
if (!dp || len <= 0)
|
|
return NULL;
|
|
|
|
dp_array = acpi_dp_new_table(name);
|
|
if (!dp_array)
|
|
return NULL;
|
|
|
|
for (i = 0; i < len; i++)
|
|
if (!acpi_dp_add_integer(dp_array, NULL, array[i]))
|
|
break;
|
|
|
|
acpi_dp_add_array(dp, dp_array);
|
|
|
|
return dp_array;
|
|
}
|
|
|
|
struct acpi_dp *acpi_dp_add_gpio_array(struct acpi_dp *dp, const char *name,
|
|
const struct acpi_gpio_res_params *params,
|
|
size_t param_count)
|
|
{
|
|
struct acpi_dp *gpio;
|
|
uint32_t i;
|
|
|
|
if (!dp || !param_count)
|
|
return NULL;
|
|
|
|
gpio = acpi_dp_new_table(name);
|
|
if (!gpio)
|
|
return NULL;
|
|
|
|
/*
|
|
* Generate ACPI identifiers as follows:
|
|
* Package () {
|
|
* name, // e.g. cs-gpios
|
|
* Package() {
|
|
* ref, index, pin, active_low, // GPIO-0 (params[0])
|
|
* ref, index, pin, active_low, // GPIO-1 (params[1])
|
|
* ...
|
|
* }
|
|
* }
|
|
*/
|
|
for (i = 0; i < param_count; i++, params++) {
|
|
/*
|
|
* If refs is NULL, leave a hole in the gpio array. This can be used in
|
|
* conditions where some controllers use both GPIOs and native signals.
|
|
*/
|
|
if (!params->ref) {
|
|
acpi_dp_add_integer(gpio, NULL, 0);
|
|
continue;
|
|
}
|
|
|
|
/* The device that has _CRS containing GpioIO()/GpioInt() */
|
|
acpi_dp_add_reference(gpio, NULL, params->ref);
|
|
|
|
/* Index of the GPIO resource in _CRS starting from zero */
|
|
acpi_dp_add_integer(gpio, NULL, params->index);
|
|
|
|
/* Pin in the GPIO resource, typically zero */
|
|
acpi_dp_add_integer(gpio, NULL, params->pin);
|
|
|
|
/* Set if pin is active low */
|
|
acpi_dp_add_integer(gpio, NULL, params->active_low);
|
|
}
|
|
acpi_dp_add_array(dp, gpio);
|
|
|
|
return gpio;
|
|
|
|
}
|
|
|
|
|
|
struct acpi_dp *acpi_dp_add_gpio(struct acpi_dp *dp, const char *name,
|
|
const char *ref, int index, int pin,
|
|
int active_low)
|
|
{
|
|
struct acpi_gpio_res_params param = {
|
|
.ref = ref,
|
|
.index = index,
|
|
.pin = pin,
|
|
.active_low = active_low,
|
|
};
|
|
|
|
return acpi_dp_add_gpio_array(dp, name, ¶m, 1);
|
|
}
|
|
|
|
/*
|
|
* This function writes a PCI device with _ADR object:
|
|
* Example:
|
|
* Scope (\_SB.PCI0)
|
|
* {
|
|
* Device (IGFX)
|
|
* {
|
|
* Name (_ADR, 0x0000000000000000)
|
|
* Method (_STA, 0, NotSerialized) { Return (status) }
|
|
* }
|
|
* }
|
|
*/
|
|
void acpi_device_write_pci_dev(const struct device *dev)
|
|
{
|
|
const char *scope = acpi_device_scope(dev);
|
|
const char *name = acpi_device_name(dev);
|
|
|
|
assert(dev->path.type == DEVICE_PATH_PCI);
|
|
assert(name);
|
|
assert(scope);
|
|
|
|
acpigen_write_scope(scope);
|
|
acpigen_write_device(name);
|
|
|
|
acpigen_write_ADR_pci_device(dev);
|
|
acpigen_write_STA(acpi_device_status(dev));
|
|
|
|
acpigen_pop_len(); /* Device */
|
|
acpigen_pop_len(); /* Scope */
|
|
}
|