sravan/system76-coreboot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
9ceae905f10a555835db0af072c3adfff98b3a7b
system76-coreboot/src/southbridge/amd/sb600/sb600_sm.c
Luc Verhaegen 9ceae905f1 CMOS: Add set_option and rework get_option. 
To ease some of my debugging pain on the unichrome, i decided i needed to
move FB size selection into cmos, so i could test a size and then reset it
to the default after loading this value so that the next reboot uses the
(working) default again. This meant implementing set_option in parallel to
get_option.

get_option was then found to have inversed argument ordering (like outb) and
passing char * and then depending on the cmos layout length, which made me
feel quite uncomfortable. Since we either have reserved space (which we
shouldn't do anything with in these two functions), an enum or a
hexadecimal value, unsigned int seemed like the way to go. So all users of
get_option now have their arguments inversed and switched from using ints
to unsigned ints now.

The way get_cmos_value was implemented forced us to not overlap byte and to
have multibyte values be byte aligned. This logic is now adapted to do a
full uint32_t read (when needed) at any offset and any length up to 32, and
the shifting all happens inside an uint32_t as well. set_cmos_value was
implemented similarly. Both routines have been extensively tested in a
quick separate little program as it is not easy to get this stuff right.

build_opt_tbl.c was altered to function correctly within these new
parameters. The enum value retrieval has been changed strol(..., NULL, 10)
to stroul(..., NULL, 0), so that we not only are able to use unsigned ints
now but so that we also interprete hex values correctly. The 32bit limit
gets imposed on all entries not marked reserved, an unused "user_data" field
that appeared in a lot of cmos.layouts has been changed to reserved as well.

Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Peter Stuge <peter@stuge.se>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4332 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-03 10:47:19 +00:00

450 lines
11 KiB
C
Raw Blame History

/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <device/smbus.h>
#include <pc80/mc146818rtc.h>
#include <bitops.h>
#include <arch/io.h>
#include <cpu/x86/lapic.h>
#include <stdlib.h>
#include "sb600.h"
#include "sb600_smbus.c"
#define NMI_OFF 0
#define MAINBOARD_POWER_OFF 0
#define MAINBOARD_POWER_ON 1
#ifndef MAINBOARD_POWER_ON_AFTER_POWER_FAIL
#define MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON
#endif
struct ioapicreg {
u32 reg;
u32 value_low, value_high;
};
static struct ioapicreg ioapicregvalues[] = {
#define ALL (0xff << 24)
#define NONE (0)
#define DISABLED (1 << 16)
#define ENABLED (0 << 16)
#define TRIGGER_EDGE (0 << 15)
#define TRIGGER_LEVEL (1 << 15)
#define POLARITY_HIGH (0 << 13)
#define POLARITY_LOW (1 << 13)
#define PHYSICAL_DEST (0 << 11)
#define LOGICAL_DEST (1 << 11)
#define ExtINT (7 << 8)
#define NMI (4 << 8)
#define SMI (2 << 8)
#define INT (1 << 8)
/* IO-APIC virtual wire mode configuration */
/* mask, trigger, polarity, destination, delivery, vector */
{0, DISABLED, NONE},
{1, DISABLED, NONE},
{2, DISABLED, NONE},
{3, DISABLED, NONE},
{4, DISABLED, NONE},
{5, DISABLED, NONE},
{6, DISABLED, NONE},
{7, DISABLED, NONE},
{8, DISABLED, NONE},
{9, DISABLED, NONE},
{10, DISABLED, NONE},
{11, DISABLED, NONE},
{12, DISABLED, NONE},
{13, DISABLED, NONE},
{14, DISABLED, NONE},
{15, DISABLED, NONE},
{16, DISABLED, NONE},
{17, DISABLED, NONE},
{18, DISABLED, NONE},
{19, DISABLED, NONE},
{20, DISABLED, NONE},
{21, DISABLED, NONE},
{22, DISABLED, NONE},
{23, DISABLED, NONE},
/* Be careful and don't write past the end... */
};
static void setup_ioapic(u32 ioapic_base)
{
int i;
u32 value_low, value_high;
volatile u32 *l;
struct ioapicreg *a = ioapicregvalues;
ioapicregvalues[0].value_high = lapicid() << (56 - 32);
printk_debug("lapicid = %016x\n", ioapicregvalues[0].value_high);
l = (u32 *)ioapic_base;
for (i = 0; i < ARRAY_SIZE(ioapicregvalues);
i++, a++) {
l[0] = (a->reg * 2) + 0x10;
l[4] = a->value_low;
value_low = l[4];
l[0] = (a->reg * 2) + 0x11;
l[4] = a->value_high;
value_high = l[4];
if ((i == 0) && (value_low == 0xffffffff)) {
printk_warning("IO APIC not responding.\n");
return;
}
}
}
/*
* SB600 enables all USB controllers by default in SMBUS Control.
* SB600 enables SATA by default in SMBUS Control.
*/
static void sm_init(device_t dev)
{
u8 byte;
u8 byte_old;
u32 dword;
u32 ioapic_base;
u32 on;
u32 nmi_option;
printk_info("sm_init().\n");
ioapic_base = pci_read_config32(dev, 0x74) & (0xffffffe0); /* some like mem resource, but does not have enable bit */
setup_ioapic(ioapic_base);
dword = pci_read_config8(dev, 0x62);
dword |= 1 << 2;
pci_write_config8(dev, 0x62, dword);
dword = pci_read_config32(dev, 0x78);
dword |= 1 << 9;
pci_write_config32(dev, 0x78, dword); /* enable 0xCD6 0xCD7 */
/* bit 10: MultiMediaTimerIrqEn */
dword = pci_read_config8(dev, 0x64);
dword |= 1 << 10;
pci_write_config8(dev, 0x64, dword);
/* enable serial irq */
byte = pci_read_config8(dev, 0x69);
byte |= 1 << 7; /* enable serial irq function */
byte &= ~(0xF << 2);
byte |= 4 << 2; /* set NumSerIrqBits=4 */
pci_write_config8(dev, 0x69, byte);
byte = pm_ioread(0x61);
byte |= 1 << 1; /* Set to enable NB/SB handshake during IOAPIC interrupt for AMD K8/K7 */
pm_iowrite(0x61, byte);
/* disable SMI */
byte = pm_ioread(0x53);
byte |= 1 << 3;
pm_iowrite(0x53, byte);
/* power after power fail */
on = MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
get_option("power_on_after_fail", &on);
byte = pm_ioread(0x74);
byte &= ~0x03;
if (on) {
byte |= 2;
}
byte |= 1 << 2;
pm_iowrite(0x74, byte);
printk_info("set power %s after power fail\n", on ? "on" : "off");
/* sb600 rpr:2.3.3: */
byte = pm_ioread(0x9A);
byte |= 1 << 5 | 1 << 4 | 1 << 2;
pm_iowrite(0x9A, byte);
byte = pm_ioread(0x8F);
byte |= 1 << 5;
byte &= ~(1 << 4);
pm_iowrite(0x8F, byte);
pm_iowrite(0x8B, 0x01);
pm_iowrite(0x8A, 0x90);
pm_iowrite(0x88, 0x10); /* A21 */
byte = pm_ioread(0x7C);
byte |= 1 << 0;
pm_iowrite(0x7C, byte);
byte = pm_ioread(0x68);
byte &= ~(1 << 1);
/* 2.6 */
byte |= 1 << 2;
pm_iowrite(0x68, byte);
/* 2.6 */
byte = pm_ioread(0x65);
byte &= ~(1 << 7);
pm_iowrite(0x65, byte);
/* 2.3.4 */
byte = pm_ioread(0x52);
byte &= ~0x2F;
byte |= 0x8;
pm_iowrite(0x52, byte);
byte = pm_ioread(0x8D);
byte &= ~(1 << 6);
pm_iowrite(0x8D, byte);
byte = pm_ioread(0x61);
byte &= ~(1 << 2);
pm_iowrite(0x61, byte);
byte = pm_ioread(0x42);
byte &= ~(1 << 2);
pm_iowrite(0x42, byte);
/* Set up NMI on errors */
byte = inb(0x70); /* RTC70 */
byte_old = byte;
nmi_option = NMI_OFF;
get_option("nmi", &nmi_option);
if (nmi_option) {
byte &= ~(1 << 7); /* set NMI */
printk_info("++++++++++set NMI+++++\n");
} else {
byte |= (1 << 7); /* Can not mask NMI from PCI-E and NMI_NOW */
printk_info("++++++++++no set NMI+++++\n");
}
byte &= ~(1 << 7);
if (byte != byte_old) {
outb(byte, 0x70);
}
/* 2.10 IO Trap Settings */
abcfg_reg(0x10090, 1 << 16, 1 << 16);
/* ab index */
pci_write_config32(dev, 0xF0, AB_INDX);
/* Initialize the real time clock */
rtc_init(0);
/*3.4 Enabling IDE/PCIB Prefetch for Performance Enhancement */
abcfg_reg(0x10060, 9 << 17, 9 << 17);
abcfg_reg(0x10064, 9 << 17, 9 << 17);
/* 3.5 Enabling OHCI Prefetch for Performance Enhancement */
abcfg_reg(0x80, 1 << 0, 1<< 0);
/* 3.6 B-Link Client's Credit Variable Settings for the Downstream Arbitration Equation */
/* 3.7 Enabling Additional Address Bits Checking in Downstream */
abcfg_reg(0x9c, 3 << 0, 3 << 0);
/* 3.8 Set B-Link Prefetch Mode */
abcfg_reg(0x80, 3 << 17, 3 << 17);
/* 3.9 Enabling Detection of Upstream Interrupts */
abcfg_reg(0x94, 1 << 20,1 << 20);
/* 3.10: Enabling Downstream Posted Transactions to Pass Non-Posted
* Transactions for the K8 Platform (for All Revisions) */
abcfg_reg(0x10090, 1 << 8, 1 << 8);
/* 3.11:Programming Cycle Delay for AB and BIF Clock Gating */
/* 3.12: Enabling AB and BIF Clock Gating */
abcfg_reg(0x10054, 0xFFFF0000, 0x1040000);
abcfg_reg(0x54, 0xFF << 16, 4 << 16);
printk_info("3.11, ABCFG:0x54\n");
abcfg_reg(0x54, 1 << 24, 1 << 24);
printk_info("3.12, ABCFG:0x54\n");
abcfg_reg(0x98, 0x0000FF00, 0x00004700);
/* 3.13:Enabling AB Int_Arbiter Enhancement (for All Revisions) */
abcfg_reg(0x10054, 0x0000FFFF, 0x07FF);
/* 3.14:Enabling L1 on A-link Express */
axcfg_reg(0x68, 0x00000003, 0x2);
axindxp_reg(0xa0, 0x0000F000, 0x6000);
abcfg_reg(0x10098, 0xFFFFFFFF, 0x4000);
abcfg_reg(0x04, 0xFFFFFFFF, 0x6);
printk_info("sm_init() end\n");
/* Enable NbSb virtual channel */
axcfg_reg(0x114, 0x3f << 1, 0 << 1);
axcfg_reg(0x120, 0x7f << 1, 0x7f << 1);
axcfg_reg(0x120, 7 << 24, 1 << 24);
axcfg_reg(0x120, 1 << 31, 1 << 31);
abcfg_reg(0x50, 1 << 3, 1 << 3);
}
static int lsmbus_recv_byte(device_t dev)
{
u32 device;
struct resource *res;
struct bus *pbus;
device = dev->path.i2c.device;
pbus = get_pbus_smbus(dev);
res = find_resource(pbus->dev, 0x10);
return do_smbus_recv_byte(res->base, device);
}
static int lsmbus_send_byte(device_t dev, u8 val)
{
u32 device;
struct resource *res;
struct bus *pbus;
device = dev->path.i2c.device;
pbus = get_pbus_smbus(dev);
res = find_resource(pbus->dev, 0x10);
return do_smbus_send_byte(res->base, device, val);
}
static int lsmbus_read_byte(device_t dev, u8 address)
{
u32 device;
struct resource *res;
struct bus *pbus;
device = dev->path.i2c.device;
pbus = get_pbus_smbus(dev);
res = find_resource(pbus->dev, 0x10);
return do_smbus_read_byte(res->base, device, address);
}
static int lsmbus_write_byte(device_t dev, u8 address, u8 val)
{
u32 device;
struct resource *res;
struct bus *pbus;
device = dev->path.i2c.device;
pbus = get_pbus_smbus(dev);
res = find_resource(pbus->dev, 0x10);
return do_smbus_write_byte(res->base, device, address, val);
}
static struct smbus_bus_operations lops_smbus_bus = {
.recv_byte = lsmbus_recv_byte,
.send_byte = lsmbus_send_byte,
.read_byte = lsmbus_read_byte,
.write_byte = lsmbus_write_byte,
};
static void sb600_sm_read_resources(device_t dev)
{
struct resource *res;
u8 byte;
/* rpr2.14: Hides SM bus controller Bar1 where stores HPET MMIO base address */
byte = pm_ioread(0x55);
byte |= 1 << 7;
pm_iowrite(0x55, byte);
/* Get the normal pci resources of this device */
/* pci_dev_read_resources(dev); */
byte = pm_ioread(0x55);
byte &= ~(1 << 7);
pm_iowrite(0x55, byte);
/* apic */
res = new_resource(dev, 0x74);
res->base = 0xfec00000;
res->size = 256 * 0x10;
res->limit = 0xFFFFFFFFUL; /* res->base + res->size -1; */
res->align = 8;
res->gran = 8;
res->flags = IORESOURCE_MEM | IORESOURCE_FIXED;
res = new_resource(dev, 0x14); /* hpet */
res->base = 0xfed00000; /* reset hpet to widely accepted address */
res->size = 0x400;
res->limit = 0xFFFFFFFFUL; /* res->base + res->size -1; */
res->align = 8;
res->gran = 8;
res->flags = IORESOURCE_MEM | IORESOURCE_FIXED;
/* dev->command |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; */
/* smbus */
res = new_resource(dev, 0x10);
res->base = 0xB00;
res->size = 0x10;
res->limit = 0xFFFFUL; /* res->base + res->size -1; */
res->align = 8;
res->gran = 8;
res->flags = IORESOURCE_IO | IORESOURCE_FIXED;
compact_resources(dev);
}
static void sb600_sm_set_resources(struct device *dev)
{
struct resource *res;
u8 byte;
pci_dev_set_resources(dev);
/* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridage */
byte = pm_ioread(0x52);
byte |= 1 << 6;
pm_iowrite(0x52, byte);
res = find_resource(dev, 0x74);
pci_write_config32(dev, 0x74, res->base | 1 << 3);
res = find_resource(dev, 0x14);
pci_write_config32(dev, 0x14, res->base);
res = find_resource(dev, 0x10);
pci_write_config32(dev, 0x10, res->base | 1);
}
static struct pci_operations lops_pci = {
.set_subsystem = pci_dev_set_subsystem,
};
static struct device_operations smbus_ops = {
.read_resources = sb600_sm_read_resources,
.set_resources = sb600_sm_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = sm_init,
.scan_bus = scan_static_bus,
/* .enable = sb600_enable, */
.ops_pci = &lops_pci,
.ops_smbus_bus = &lops_smbus_bus,
};
static struct pci_driver smbus_driver __pci_driver = {
.ops = &smbus_ops,
.vendor = PCI_VENDOR_ID_ATI,
.device = PCI_DEVICE_ID_ATI_SB600_SM,
};
Reference in New Issue View Git Blame Copy Permalink