b39ba2efcf
This adds configuration of SerialIO devices in the Lynxpoint-LP chipset. This includes DMA, I2C, SPI, UART, and SDIO controllers. There is assorted magic setup necessary for the devices and while it is similar for each device there are subtle differences in some register settings. These devices must be put into "ACPI Mode" in order to take advantage of S0ix. When in ACPI mode the allocated PCI BARs must be passed to ACPI so it can be relayed to the OS. When the devices are in ACPI mode BAR0+BAR1 is saved into ACPI NVS and then updated and returned when the OS calls _CRS. Note that is is not entirely complete yet. We need to update the IASL compiler in our build environment to support ACPI 5.0 in order to be able to pass the FixedDMA entries to the kernel. There are also no ACPI methods defined yet to do D0->D3->D0 transitions for actually entering/exiting S0ix states. This is hard to test right now because our kernel does not support any of these devices in ACPI mode. I was able to build and test the upstream bleeding-edge branch of the linux-pm git tree. With that tree I was able to enumerate and load the driver for the DesignWare I2C driver and attempt to probe the I2C bus -- although there are no devices attatched. I am also able to see the resources from ACPI in /proc/iomem get reserved properly in the kernel. Change-Id: Ie311addd6a25f3b7edf3388fe68c1cd691a0a500 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2971 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
84 lines
2.7 KiB
Makefile
84 lines
2.7 KiB
Makefile
##
|
|
## This file is part of the coreboot project.
|
|
##
|
|
## Copyright (C) 2010 Google Inc.
|
|
##
|
|
## This program is free software; you can redistribute it and/or modify
|
|
## it under the terms of the GNU General Public License as published by
|
|
## the Free Software Foundation; version 2 of the License.
|
|
##
|
|
## This program is distributed in the hope that it will be useful,
|
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
## GNU General Public License for more details.
|
|
##
|
|
## You should have received a copy of the GNU General Public License
|
|
## along with this program; if not, write to the Free Software
|
|
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
##
|
|
|
|
# Run an intermediate step when producing coreboot.rom
|
|
# that adds additional components to the final firmware
|
|
# image outside of CBFS
|
|
# FIXME, uncomment as soon as we have ME firmware in the blobs repo
|
|
# INTERMEDIATE:=lynxpoint_add_me
|
|
|
|
ramstage-y += pch.c
|
|
ramstage-y += azalia.c
|
|
ramstage-y += lpc.c
|
|
ramstage-y += pci.c
|
|
ramstage-y += pcie.c
|
|
ramstage-y += sata.c
|
|
ramstage-y += usb_ehci.c
|
|
ramstage-y += me_9.x.c
|
|
ramstage-y += smbus.c
|
|
ramstage-$(CONFIG_INTEL_LYNXPOINT_LP) += serialio.c
|
|
|
|
ramstage-y += rcba.c
|
|
ramstage-y += me_status.c
|
|
ramstage-y += reset.c
|
|
ramstage-y += watchdog.c
|
|
ramstage-y += acpi.c
|
|
ramstage-$(CONFIG_ALT_CBFS_LOAD_PAYLOAD) += spi_loading.c
|
|
|
|
ramstage-$(CONFIG_ELOG) += elog.c
|
|
ramstage-y += spi.c
|
|
smm-$(CONFIG_SPI_FLASH_SMM) += spi.c
|
|
|
|
ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi.c pmutil.c
|
|
smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c me_9.x.c finalize.c pch.c
|
|
smm-$(CONFIG_HAVE_SMI_HANDLER) += pmutil.c
|
|
|
|
romstage-y += early_usb.c early_smbus.c early_me.c me_status.c early_pch.c
|
|
romstage-$(CONFIG_USBDEBUG) += usb_debug.c
|
|
romstage-y += reset.c early_spi.c rcba.c
|
|
|
|
ifeq ($(CONFIG_INTEL_LYNXPOINT_LP),y)
|
|
romstage-y += lp_gpio.c
|
|
ramstage-y += lp_gpio.c
|
|
else
|
|
romstage-y += gpio.c
|
|
ramstage-y += gpio.c
|
|
endif
|
|
|
|
lynxpoint_add_me: $(obj)/coreboot.pre $(IFDTOOL)
|
|
printf " DD Adding Intel Firmware Descriptor\n"
|
|
dd if=3rdparty/mainboard/$(MAINBOARDDIR)/descriptor.bin \
|
|
of=$(obj)/coreboot.pre conv=notrunc >/dev/null 2>&1
|
|
printf " IFDTOOL me.bin -> coreboot.pre\n"
|
|
$(objutil)/ifdtool/ifdtool \
|
|
-i ME:3rdparty/mainboard/$(MAINBOARDDIR)/me.bin \
|
|
$(obj)/coreboot.pre
|
|
mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
|
|
ifeq ($(CONFIG_LOCK_MANAGEMENT_ENGINE),y)
|
|
printf " IFDTOOL Locking Management Engine\n"
|
|
$(objutil)/ifdtool/ifdtool -l $(obj)/coreboot.pre
|
|
mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
|
|
else
|
|
printf " IFDTOOL Unlocking Management Engine\n"
|
|
$(objutil)/ifdtool/ifdtool -u $(obj)/coreboot.pre
|
|
mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
|
|
endif
|
|
|
|
PHONY += lynxpoint_add_me
|