system76-coreboot/src/mainboard/google/fizz/mainboard.c

/* SPDX-License-Identifier: GPL-2.0-only */

#include <acpi/acpi.h>
#include <baseboard/variants.h>
#include <bootmode.h>
#include <chip.h>
#include <console/console.h>
#include <delay.h>
#include <device/device.h>
#include <ec/ec.h>
#include <ec/google/chromeec/ec.h>
#include <gpio.h>
#include <intelblocks/power_limit.h>
#include <smbios.h>
#include <soc/pci_devs.h>
#include <soc/nhlt.h>
#include <stdio.h>
#include <string.h>
#include <timer.h>

#include <variant/gpio.h>

#define FIZZ_SKU_ID_I7_U42  0x4
#define FIZZ_SKU_ID_I5_U42  0x5
#define FIZZ_SKU_ID_I3_U42  0x6
#define FIZZ_SKU_ID_I7_U22  0x3
#define FIZZ_SKU_ID_I5_U22  0x2
#define FIZZ_SKU_ID_I3_U22  0x1
#define FIZZ_SKU_ID_CEL_U22 0x0
#define FIZZ_PL2_U42        44
#define FIZZ_PL2_U22        29
#define FIZZ_PSYSPL2_U22    65
#define FIZZ_PSYSPL2_U42    90
#define FIZZ_MAX_TIME_WINDOW 6
#define FIZZ_MIN_DUTYCYCLE   4
/*
 * For type-C chargers, set PL2 to 90% of max power to account for
 * cable loss and FET Rdson loss in the path from the source.
 */
#define SET_PSYSPL2(w)     (9 * (w) / 10)

static uint8_t read_sku_id_from_gpio(void)
{
	const gpio_t sku_id_gpios[] = {
		GPIO_SKU_ID0,
		GPIO_SKU_ID1,
		GPIO_SKU_ID2,
		GPIO_SKU_ID3,
	};
	return gpio_base2_value(sku_id_gpios, ARRAY_SIZE(sku_id_gpios));
}

static uint8_t board_sku_id(void)
{
	static int sku_id = -1;

	if (sku_id < 0) {
		uint32_t id;
		if (google_chromeec_cbi_get_sku_id(&id))
			/* TODO: Once transition completes, raise error instead
			   of returning gpio value which could be unintended. */
			/* Reading from EC may succeed next time but we do not
			   want to return different values. So, we cache the
			   value read from GPIOs. */
			id = read_sku_id_from_gpio();
		sku_id = id;
	}

	return sku_id;
}

/*
 * mainboard_set_power_limits
 *
 * Set Pl2 and SysPl2 values based on detected charger.
 * If detected barrel jack, use values below based on SKU.
 * definitions:
 * x = no value entered. Use default value in parenthesis.
 *     will set 0 to anything that shouldn't be set.
 * n = max value of power adapter.
 * +-------------+-----+---------+-----------+-------+
 * | sku_id      | PL2 | PsysPL2 |  PsysPL3  |  PL4  |
 * +-------------+-----+---------+-----------+-------+
 * | i7 U42      |  44 |   81    | x(.85PL4) | x(71) |
 * | i5 U42      |  44 |   81    | x(.85PL4) | x(71) |
 * | i3 U42      |  44 |   81    | x(.85PL4) | x(71) |
 * | i7 U22      |  29 |   58    | x(.85PL4) | x(43) |
 * | i5 U22      |  29 |   58    | x(.85PL4) | x(43) |
 * | i3 U22      |  29 |   58    | x(.85PL4) | x(43) |
 * | celeron U22 |  29 |   58    | x(.85PL4) | x(43) |
 * +-------------+-----+---------+-----------+-------+
 * For USB C charger:
 * +-------------+-----+---------+---------+-------+
 * | Max Power(W)| PL2 | PsysPL2 | PsysPL3 |  PL4  |
 * +-------------+-----+---------+---------+-------+
 * | 60 (U42)    |  44 |   54    |    54   |   54  |
 * | 60 (U22)    |  29 |   54    |    54   | x(43) |
 * | n  (U42)    |  44 |   .9n   |   .9n   |  .9n  |
 * | n  (U22)    |  29 |   .9n   |   .9n   | x(43) |
 * +-------------+-----+---------+---------+-------+
 */
static void mainboard_set_power_limits(struct soc_power_limits_config *conf)
{
	enum usb_chg_type type;
	u32 watts;
	u16 volts_mv, current_ma;
	u32 pl2, psyspl2;
	int rv = google_chromeec_get_usb_pd_power_info(&type, &current_ma, &volts_mv);
	uint8_t sku = board_sku_id();
	const uint32_t u42_mask = (1 << FIZZ_SKU_ID_I7_U42) |
				  (1 << FIZZ_SKU_ID_I5_U42) |
				  (1 << FIZZ_SKU_ID_I3_U42);

	/* PL2 value is sku-based, no matter what charger we are using */
	pl2 = FIZZ_PL2_U22;
	if ((1 << sku) & u42_mask)
		pl2 = FIZZ_PL2_U42;
	conf->tdp_psyspl3 = conf->tdp_pl4 = 0;

	/* If we can't get charger info or not PD charger, assume barrel jack */
	if (rv != 0 || type != USB_CHG_TYPE_PD) {
		/* using the barrel jack, get PsysPL2 based on sku id */
		psyspl2 = FIZZ_PSYSPL2_U22;
		/* Running a U42 SKU */
		if ((1 << sku) & u42_mask)
			psyspl2 = FIZZ_PSYSPL2_U42;
	} else {
		/* Detected TypeC.  Base on max value of adapter */
		watts = ((u32)volts_mv * current_ma) / 1000000;
		psyspl2 = watts;
		conf->tdp_psyspl3 = SET_PSYSPL2(psyspl2);
		/* set max possible time window */
		conf->tdp_psyspl3_time = FIZZ_MAX_TIME_WINDOW;
		/* set minimum duty cycle */
		conf->tdp_psyspl3_dutycycle = FIZZ_MIN_DUTYCYCLE;
		if ((1 << sku) & u42_mask)
			conf->tdp_pl4 = SET_PSYSPL2(psyspl2);
	}

	conf->tdp_pl2_override = pl2;
	/* set psyspl2 to 90% of max adapter power */
	conf->tdp_psyspl2 = SET_PSYSPL2(psyspl2);
}

static uint8_t read_oem_id_from_gpio(void)
{
	const gpio_t oem_id_gpios[] = {
		GPIO_OEM_ID1,
		GPIO_OEM_ID2,
		GPIO_OEM_ID3,
	};
	return gpio_base2_value(oem_id_gpios, ARRAY_SIZE(oem_id_gpios));
}

static uint8_t board_oem_id(void)
{
	static int oem_id = -1;

	if (oem_id < 0) {
		uint32_t id;
		if (google_chromeec_cbi_get_oem_id(&id))
			/* TODO: Once transition completes, raise error instead
			   of returning gpio value which could be unintended. */
			/* Reading from EC may succeed next time but we do not
			   want to return different values. So, we cache the
			   value read from GPIOs. */
			id = read_oem_id_from_gpio();
		oem_id = id;
	}

	return oem_id;
}

const char *smbios_system_sku(void)
{
	static char sku_str[7]; /* sku{0..255} */

	snprintf(sku_str, sizeof(sku_str), "sku%d", board_oem_id());

	return sku_str;
}

const char *fizz_oem_name[] = {
	"Kench",
	"Teemo",
	"Sion",
	"Wukong",
	"Wukong",
	"Wukong",
	"Teemo",
	"Karma",
	"Jax",
	"Endeavour",
	"Excelsior"
};

const char *smbios_mainboard_product_name(void)
{
	return fizz_oem_name[board_oem_id()];
}

static void mainboard_init(struct device *dev)
{
	mainboard_ec_init();
}

static unsigned long mainboard_write_acpi_tables(
	const struct device *device, unsigned long current, acpi_rsdp_t *rsdp)
{
	const char *oem_id = NULL;
	const char *oem_table_id = NULL;
	uint32_t oem_revision = 0;
	uintptr_t start_addr;
	uintptr_t end_addr;
	struct nhlt *nhlt;

	start_addr = current;

	nhlt = nhlt_init();
	if (!nhlt)
		return start_addr;

	variant_nhlt_init(nhlt);
	variant_nhlt_oem_overrides(&oem_id, &oem_table_id, &oem_revision);

	end_addr = nhlt_soc_serialize_oem_overrides(nhlt, start_addr,
				oem_id, oem_table_id, oem_revision);

	if (end_addr != start_addr)
		acpi_add_table(rsdp, (void *)start_addr);

	return end_addr;
}

static void mainboard_enable(struct device *dev)
{
	struct soc_power_limits_config *soc_conf;
	config_t *conf = config_of_soc();

	soc_conf = &conf->power_limits_config;
	mainboard_set_power_limits(soc_conf);

	dev->ops->init = mainboard_init;
	dev->ops->write_acpi_tables = mainboard_write_acpi_tables;
}

#define GPIO_HDMI_HPD		GPP_E13
#define GPIO_DP_HPD		GPP_E14

/* TODO: This can be moved to common directory */
static void wait_for_hpd(gpio_t gpio, long timeout)
{
	struct stopwatch sw;

	printk(BIOS_INFO, "Waiting for HPD\n");
	gpio_input(gpio);

	stopwatch_init_msecs_expire(&sw, timeout);
	while (!gpio_get(gpio)) {
		if (stopwatch_expired(&sw)) {
			printk(BIOS_WARNING,
			       "HPD not ready after %ldms. Abort.\n", timeout);
			return;
		}
		mdelay(200);
	}
	printk(BIOS_INFO, "HPD ready after %lld ms\n",
	       stopwatch_duration_msecs(&sw));
}

void __weak variant_chip_display_init(void)
{
	static const long display_timeout_ms = 3000;

	/* This is reconfigured back to whatever FSP-S expects by
	   gpio_configure_pads. */
	gpio_input(GPIO_HDMI_HPD);
	if (display_init_required() && !gpio_get(GPIO_HDMI_HPD)) {
		/* This has to be done before FSP-S runs. */
		if (google_chromeec_wait_for_displayport(display_timeout_ms))
			wait_for_hpd(GPIO_DP_HPD, display_timeout_ms);
	}
}

static void mainboard_chip_init(void *chip_info)
{
	const struct pad_config *pads;
	size_t num;

	variant_chip_display_init();

	pads = variant_gpio_table(&num);
	gpio_configure_pads(pads, num);
}

struct chip_operations mainboard_ops = {
	.init = mainboard_chip_init,
	.enable_dev = mainboard_enable,
};