c6588c5af9
The boot_device is a region_device that represents the device from which coreboot retrieves and boots its stages. The existing cbfs implementations use the boot_device as the intermediary for accessing the CBFS region. Also, there's currently only support for a read-only view of the boot_device. i.e. one cannot write to the boot_device using this view. However, a writable boot_device could be added in the future. Change-Id: Ic0da796ab161b8025c90631be3423ba6473ad31c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10216 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
153 lines
4.7 KiB
Makefile
153 lines
4.7 KiB
Makefile
ifeq ($(CONFIG_SOC_NVIDIA_TEGRA132),y)
|
|
|
|
bootblock-y += bootblock.c
|
|
bootblock-y += bootblock_asm.S
|
|
bootblock-y += clock.c
|
|
bootblock-y += spi.c
|
|
bootblock-y += i2c.c
|
|
bootblock-y += dma.c
|
|
bootblock-y += monotonic_timer.c
|
|
bootblock-y += padconfig.c
|
|
bootblock-y += power.c
|
|
bootblock-y += funitcfg.c
|
|
bootblock-y += reset.c
|
|
bootblock-y += ../tegra/gpio.c
|
|
bootblock-y += ../tegra/i2c.c
|
|
bootblock-y += ../tegra/pingroup.c
|
|
bootblock-y += ../tegra/pinmux.c
|
|
bootblock-y += ../tegra/apbmisc.c
|
|
bootblock-y += ../tegra/usb.c
|
|
ifeq ($(CONFIG_BOOTBLOCK_CONSOLE),y)
|
|
bootblock-$(CONFIG_DRIVERS_UART) += uart.c
|
|
endif
|
|
|
|
verstage-y += verstage.c
|
|
verstage-y += dma.c
|
|
verstage-y += monotonic_timer.c
|
|
verstage-y += spi.c
|
|
verstage-y += padconfig.c
|
|
verstage-y += funitcfg.c
|
|
verstage-$(CONFIG_DRIVERS_UART) += uart.c
|
|
verstage-y += ../tegra/gpio.c
|
|
verstage-y += ../tegra/i2c.c
|
|
verstage-y += ../tegra/pinmux.c
|
|
verstage-y += clock.c
|
|
verstage-y += i2c.c
|
|
|
|
romstage-y += 32bit_reset.S
|
|
romstage-y += romstage_asm.S
|
|
romstage-y += addressmap.c
|
|
romstage-y += cbmem.c
|
|
romstage-y += ccplex.c
|
|
romstage-y += clock.c
|
|
romstage-y += cpu.c
|
|
romstage-y += reset.c
|
|
romstage-y += spi.c
|
|
romstage-y += i2c.c
|
|
romstage-y += dma.c
|
|
romstage-y += monotonic_timer.c
|
|
romstage-y += padconfig.c
|
|
romstage-y += funitcfg.c
|
|
romstage-y += romstage.c
|
|
romstage-y += power.c
|
|
romstage-y += sdram.c
|
|
romstage-y += sdram_lp0.c
|
|
romstage-y += ../tegra/gpio.c
|
|
romstage-y += ../tegra/i2c.c
|
|
romstage-y += ../tegra/pinmux.c
|
|
romstage-y += ../tegra/usb.c
|
|
romstage-$(CONFIG_DRIVERS_UART) += uart.c
|
|
|
|
ramstage-y += 32bit_reset.S
|
|
ramstage-y += addressmap.c
|
|
ramstage-y += cbmem.c
|
|
ramstage-y += cpu.c
|
|
ramstage-y += cpu_lib.S
|
|
ramstage-y += clock.c
|
|
ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += dc.c
|
|
ramstage-$(CONFIG_MAINBOARD_DO_DSI_INIT) += dsi.c
|
|
ramstage-$(CONFIG_MAINBOARD_DO_DSI_INIT) += mipi_dsi.c
|
|
ramstage-$(CONFIG_MAINBOARD_DO_DSI_INIT) += mipi.c
|
|
ramstage-$(CONFIG_MAINBOARD_DO_DSI_INIT) += mipi-phy.c
|
|
ramstage-$(CONFIG_MAINBOARD_DO_DSI_INIT) += ./jdi_25x18_display/panel-jdi-lpm102a188a.c
|
|
ramstage-$(CONFIG_MAINBOARD_DO_SOR_INIT) += dp.c
|
|
ramstage-$(CONFIG_MAINBOARD_DO_SOR_INIT) += sor.c
|
|
|
|
ramstage-y += soc.c
|
|
ramstage-y += spi.c
|
|
ramstage-y += i2c.c
|
|
ramstage-y += i2c6.c
|
|
ramstage-y += power.c
|
|
ramstage-y += dma.c
|
|
ramstage-y += gic.c
|
|
ramstage-y += monotonic_timer.c
|
|
ramstage-y += padconfig.c
|
|
ramstage-y += funitcfg.c
|
|
ramstage-y += reset.c
|
|
ramstage-y += ../tegra/apbmisc.c
|
|
ramstage-y += ../tegra/gpio.c
|
|
ramstage-y += ../tegra/i2c.c
|
|
ramstage-y += ../tegra/pinmux.c
|
|
ramstage-y += ramstage.c
|
|
ramstage-y += mmu_operations.c
|
|
ramstage-$(CONFIG_DRIVERS_UART) += uart.c
|
|
ramstage-y += ../tegra/usb.c
|
|
ramstage-$(CONFIG_ARM64_USE_SECURE_MONITOR) += secmon.c
|
|
|
|
secmon-y += 32bit_reset.S
|
|
secmon-y += cpu.c
|
|
secmon-y += cpu_lib.S
|
|
secmon-y += flow_ctrl.c
|
|
secmon-y += power.c
|
|
secmon-y += psci.c
|
|
secmon-y += uart.c
|
|
secmon-y += gic.c
|
|
|
|
modules_arm-y += monotonic_timer.c
|
|
VBOOT_STUB_DEPS += $(obj)/soc/nvidia/tegra132/monotonic_timer.rmodules_arm.o
|
|
|
|
CPPFLAGS_common += -Isrc/soc/nvidia/tegra132/include/
|
|
CBOOTIMAGE_OPTS = --soc tegra132
|
|
|
|
# We want to grab the bootblock right before it goes into the image and wrap
|
|
# it inside a BCT, but ideally we would do that without making special, one
|
|
# use modifications to the main ARM Makefile. We do this in two ways. First,
|
|
# we copy bootblock.elf to bootblock.raw.elf and allow the %.bin: %.elf
|
|
# template rule to turn it into bootblock.raw.bin. This makes sure whatever
|
|
# processing is supposed to happen to turn an .elf into a .bin happens.
|
|
#
|
|
# Second, we add our own rule for creating bootblock.bin from
|
|
# bootblock.raw.bin which displaces the template rule. When other rules that
|
|
# package up the image pull in bootblock.bin, it will be this wrapped version
|
|
# instead of the raw bootblock.
|
|
|
|
$(objcbfs)/bootblock.raw.elf: $(objcbfs)/bootblock.elf
|
|
cp $< $@
|
|
|
|
$(obj)/generated/bct.bin: $(obj)/generated/bct.cfg $(CBOOTIMAGE)
|
|
@printf " CBOOTIMAGE $(subst $(obj)/,,$(@))\n"
|
|
$(CBOOTIMAGE) -gbct $(CBOOTIMAGE_OPTS) $< $@
|
|
|
|
BCT_BIN = $(obj)/generated/bct.bin
|
|
BCT_WRAPPER = $(obj)/generated/bct.wrapper
|
|
MTS_DIR = $(CONFIG_MTS_DIRECTORY)
|
|
PREBOOT_MTS_FILE = $(MTS_DIR)/preboot_cr.bin
|
|
$(objcbfs)/bootblock.bin: $(objcbfs)/bootblock.raw.bin $(BCT_BIN) $(CBOOTIMAGE)
|
|
echo "Version = 1;" > $(BCT_WRAPPER)
|
|
echo "Redundancy = 1;" >> $(BCT_WRAPPER)
|
|
echo "Bctcopy = 1;" >> $(BCT_WRAPPER)
|
|
echo "Bctfile = $(BCT_BIN);" >> $(BCT_WRAPPER)
|
|
echo "MtsPreboot = $(PREBOOT_MTS_FILE),0x4000f000,0x4000f000,Complete;" >> $(BCT_WRAPPER)
|
|
echo "BootLoader = $<,$(call loadaddr,bootblock),$(call loadaddr,bootblock),Complete;" >> $(BCT_WRAPPER)
|
|
@printf " CBOOTIMAGE $(subst $(obj)/,,$(@))\n"
|
|
$(CBOOTIMAGE) $(CBOOTIMAGE_OPTS) $(BCT_WRAPPER) $@
|
|
|
|
# MTS microcode
|
|
MTS_FILE = $(MTS_DIR)/mts_cr.bin
|
|
MTS_FILE_CBFS = mts
|
|
cbfs-files-y += $(MTS_FILE_CBFS)
|
|
$(MTS_FILE_CBFS)-file := $(MTS_FILE)
|
|
$(MTS_FILE_CBFS)-type := raw
|
|
|
|
endif
|