Clean up superfluous line terminators. Change-Id: If837b4f1b3e7702cbb09ba12f53ed788a8f31386 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/4562 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
1770 lines
48 KiB
C
1770 lines
48 KiB
C
/*
|
|
* This file is part of the coreboot project.
|
|
*
|
|
* Copyright (C) 2011 Sven Schnelle <svens@stackframe.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; version 2 of
|
|
* the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
|
* MA 02110-1301 USA
|
|
*/
|
|
|
|
#include "raminit.h"
|
|
#include <arch/io.h>
|
|
#include <device/pci_def.h>
|
|
#include <device/pnp_def.h>
|
|
#include <cpu/x86/lapic.h>
|
|
#include <cpu/intel/speedstep.h>
|
|
#include <console/console.h>
|
|
#include <spd.h>
|
|
#include <types.h>
|
|
#include <string.h>
|
|
#include <cbmem.h>
|
|
#include <stdlib.h>
|
|
#include <lib.h>
|
|
#include <delay.h>
|
|
|
|
static int i5000_for_each_channel(struct i5000_fbd_branch *branch,
|
|
int (*cb)(struct i5000_fbd_channel *))
|
|
{
|
|
struct i5000_fbd_channel *c;
|
|
int ret;
|
|
|
|
for(c = branch->channel; c < branch->channel + I5000_MAX_CHANNEL; c++)
|
|
if (c->used && (ret = cb(c)))
|
|
return ret;
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_for_each_branch(struct i5000_fbd_setup *setup,
|
|
int (*cb)(struct i5000_fbd_branch *))
|
|
{
|
|
struct i5000_fbd_branch *b;
|
|
int ret;
|
|
|
|
for(b = setup->branch; b < setup->branch + I5000_MAX_BRANCH; b++)
|
|
if (b->used && (ret = cb(b)))
|
|
return ret;
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_for_each_dimm(struct i5000_fbd_setup *setup,
|
|
int (*cb)(struct i5000_fbdimm *))
|
|
{
|
|
struct i5000_fbdimm *d;
|
|
int ret, i;
|
|
|
|
for(i = 0; i < I5000_MAX_DIMMS; i++) {
|
|
d = setup->dimms[i];
|
|
if ((ret = cb(d))) {
|
|
return ret;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_for_each_dimm_present(struct i5000_fbd_setup *setup,
|
|
int (*cb)(struct i5000_fbdimm *))
|
|
{
|
|
struct i5000_fbdimm *d;
|
|
int ret, i;
|
|
|
|
for(i = 0; i < I5000_MAX_DIMMS; i++) {
|
|
d = setup->dimms[i];
|
|
if (d->present && (ret = cb(d)))
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int spd_read_byte(struct i5000_fbdimm *d, u8 addr, int count, u8 *out)
|
|
{
|
|
u16 status;
|
|
device_t dev = d->branch->branchdev;
|
|
|
|
int cmdreg = d->channel->num ? I5000_SPDCMD1 : I5000_SPDCMD0;
|
|
int stsreg = d->channel->num ? I5000_SPD1 : I5000_SPD0;
|
|
|
|
while(count-- > 0) {
|
|
pci_write_config32(dev, cmdreg, 0xa8000000 | \
|
|
(d->num & 0x03) << 24 | addr++ << 16);
|
|
|
|
int timeout = 1000;
|
|
while((status = pci_read_config16(dev, stsreg)) & I5000_SPD_BUSY && timeout--)
|
|
udelay(10);
|
|
|
|
if (status & I5000_SPD_SBE || !timeout)
|
|
return -1;
|
|
|
|
if (status & I5000_SPD_RDO) {
|
|
*out = status & 0xff;
|
|
out++;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void i5000_clear_fbd_errors(void)
|
|
{
|
|
device_t dev16_1, dev16_2;
|
|
|
|
dev16_1 = PCI_ADDR(0, 16, 1, 0);
|
|
dev16_2 = PCI_ADDR(0, 16, 2, 0);
|
|
|
|
pci_write_config32(dev16_1, I5000_EMASK_FBD,
|
|
pci_read_config32(dev16_1, I5000_EMASK_FBD));
|
|
|
|
pci_write_config32(dev16_1, I5000_NERR_FAT_FBD,
|
|
pci_read_config32(dev16_1, I5000_NERR_FAT_FBD));
|
|
|
|
pci_write_config32(dev16_1, I5000_FERR_FAT_FBD,
|
|
pci_read_config32(dev16_1, I5000_FERR_FAT_FBD));
|
|
|
|
pci_write_config32(dev16_1, I5000_NERR_NF_FBD,
|
|
pci_read_config32(dev16_1, I5000_NERR_NF_FBD));
|
|
|
|
pci_write_config32(dev16_1, I5000_FERR_NF_FBD,
|
|
pci_read_config32(dev16_1, I5000_FERR_NF_FBD));
|
|
|
|
pci_write_config32(dev16_2, I5000_FERR_GLOBAL,
|
|
pci_read_config32(dev16_2, I5000_FERR_GLOBAL));
|
|
|
|
pci_write_config32(dev16_2, I5000_NERR_GLOBAL,
|
|
pci_read_config32(dev16_2, I5000_NERR_GLOBAL));
|
|
}
|
|
|
|
static int i5000_branch_reset(struct i5000_fbd_branch *b)
|
|
{
|
|
device_t dev = b->branchdev;
|
|
|
|
pci_write_config8(dev, I5000_FBDRST, 0x00);
|
|
|
|
udelay(5000);
|
|
|
|
pci_write_config8(dev, I5000_FBDRST, 0x05);
|
|
udelay(1);
|
|
pci_write_config8(dev, I5000_FBDRST, 0x04);
|
|
udelay(2);
|
|
pci_write_config8(dev, I5000_FBDRST, 0x05);
|
|
pci_write_config8(dev, I5000_FBDRST, 0x07);
|
|
return 0;
|
|
}
|
|
|
|
static int delay_ns_to_clocks(struct i5000_fbdimm *d, int del)
|
|
{
|
|
int div;
|
|
|
|
switch (d->setup->ddr_speed) {
|
|
case DDR_533MHZ:
|
|
div = 375;
|
|
break;
|
|
|
|
default:
|
|
printk(BIOS_ERR, "Invalid clock: %d, using 667MHz\n",
|
|
d->setup->ddr_speed);
|
|
|
|
case DDR_667MHZ:
|
|
div = 300;
|
|
break;
|
|
}
|
|
|
|
return (del * 100) / div;
|
|
}
|
|
|
|
static int mtb2clks(struct i5000_fbdimm *d, int del)
|
|
{
|
|
int val, div;
|
|
|
|
switch (d->setup->ddr_speed) {
|
|
case DDR_533MHZ:
|
|
div = 375;
|
|
break;
|
|
default:
|
|
printk(BIOS_ERR, "Invalid clock: %d, using 667MHz\n",
|
|
d->setup->ddr_speed);
|
|
|
|
case DDR_667MHZ:
|
|
div = 300;
|
|
break;
|
|
}
|
|
|
|
val = (del * 1000 * d->mtb_dividend) / (d->mtb_divisor * div);
|
|
if ((val % 10) > 0)
|
|
val += 10;
|
|
return val / 10;
|
|
}
|
|
|
|
static int i5000_read_spd_data(struct i5000_fbdimm *d)
|
|
{
|
|
struct i5000_fbd_setup *s = d->setup;
|
|
u8 addr, val, org, ftb, cas, t_ras_rc_h, t_rtp, t_wtr;
|
|
u8 bb, bl, t_wr, t_rp, t_rcd, t_rc, t_ras, t_aa_min;
|
|
u8 cmd2data_addr;
|
|
int t_ck_min, dimmsize;
|
|
|
|
if (spd_read_byte(d, SPD_MEMORY_TYPE, 1, &val)) {
|
|
printk(BIOS_DEBUG, "DIMM %d/%d/%d not present\n",
|
|
d->branch->num, d->channel->num, d->num);
|
|
return 0; // No FBDIMM present
|
|
}
|
|
|
|
if (val != 0x09)
|
|
return -1; // SDRAM type not FBDIMM
|
|
|
|
if (spd_read_byte(d, 0x65, 14, d->amb_personality_bytes))
|
|
return -1;
|
|
|
|
switch(s->ddr_speed) {
|
|
case DDR_533MHZ:
|
|
cmd2data_addr = FBDIMM_SPD_CMD2DATA_533;
|
|
break;
|
|
|
|
case DDR_667MHZ:
|
|
cmd2data_addr = FBDIMM_SPD_CMD2DATA_667;
|
|
break;
|
|
|
|
default:
|
|
printk(BIOS_ERR, "Unsupported FBDIMM clock\n");
|
|
return -1;
|
|
}
|
|
|
|
if (spd_read_byte(d, FBDIMM_SPD_SDRAM_ADDRESSING, 1, &addr) ||
|
|
spd_read_byte(d, FBDIMM_SPD_MODULE_ORGANIZATION, 1, &org) ||
|
|
spd_read_byte(d, FBDIMM_SPD_FTB, 1, &ftb) ||
|
|
spd_read_byte(d, FBDIMM_SPD_MTB_DIVIDEND, 1, &d->mtb_dividend) ||
|
|
spd_read_byte(d, FBDIMM_SPD_MTB_DIVISOR, 1, &d->mtb_divisor) ||
|
|
spd_read_byte(d, FBDIMM_SPD_MIN_TCK, 1, &d->t_ck_min) ||
|
|
spd_read_byte(d, FBDIMM_SPD_T_WR, 1, &t_wr) ||
|
|
spd_read_byte(d, FBDIMM_SPD_T_RCD, 1, &t_rcd) ||
|
|
spd_read_byte(d, FBDIMM_SPD_T_RRD, 1, &d->t_rrd) ||
|
|
spd_read_byte(d, FBDIMM_SPD_T_RP, 1, &t_rp) ||
|
|
spd_read_byte(d, FBDIMM_SPD_T_RAS_RC_MSB, 1, &t_ras_rc_h) ||
|
|
spd_read_byte(d, FBDIMM_SPD_T_RAS, 1, (u8 *)&t_ras) ||
|
|
spd_read_byte(d, FBDIMM_SPD_T_RC, 1, (u8 *)&t_rc) ||
|
|
spd_read_byte(d, FBDIMM_SPD_T_RFC, 2, (u8 *)&d->t_rfc) ||
|
|
spd_read_byte(d, FBDIMM_SPD_T_WTR, 1, &t_wtr) ||
|
|
spd_read_byte(d, FBDIMM_SPD_T_RTP, 1, &t_rtp) ||
|
|
spd_read_byte(d, FBDIMM_SPD_T_BB, 1, &bb) ||
|
|
spd_read_byte(d, FBDIMM_SPD_BURST_LENGTHS_SUPPORTED, 1, &bl) ||
|
|
spd_read_byte(d, FBDIMM_SPD_ODT, 1, &d->odt) ||
|
|
spd_read_byte(d, FBDIMM_SPD_T_REFI, 1, &d->t_refi) ||
|
|
spd_read_byte(d, FBDIMM_SPD_CAS_LATENCIES, 1, &cas) ||
|
|
spd_read_byte(d, FBDIMM_SPD_CMD2DATA_533, 1, &d->cmd2datanxt[DDR_533MHZ]) ||
|
|
spd_read_byte(d, FBDIMM_SPD_CMD2DATA_667, 1, &d->cmd2datanxt[DDR_667MHZ]) ||
|
|
spd_read_byte(d, FBDIMM_SPD_CAS_MIN_LATENCY, 1, &t_aa_min)) {
|
|
printk(BIOS_ERR, "failed to read data from SPD\n");
|
|
return 0;
|
|
}
|
|
|
|
|
|
t_ck_min = (d->t_ck_min * 100) / d->mtb_divisor;
|
|
if (t_ck_min <= 300)
|
|
d->speed = DDR_667MHZ;
|
|
else if (t_ck_min <= 375)
|
|
d->speed = DDR_533MHZ;
|
|
else {
|
|
printk(BIOS_ERR, "Unsupported t_ck_min: %d\n", t_ck_min);
|
|
return -1;
|
|
}
|
|
|
|
d->sdram_width = org & 0x07;
|
|
if (d->sdram_width > 1) {
|
|
printk(BIOS_ERR, "SDRAM width %d not supported\n", d->sdram_width);
|
|
return -1;
|
|
}
|
|
|
|
if (s->ddr_speed == DDR_667MHZ && d->speed == DDR_533MHZ)
|
|
s->ddr_speed = DDR_533MHZ;
|
|
|
|
d->banks = 4 << (addr & 0x03);
|
|
d->columns = 9 + ((addr >> 2) & 0x03);
|
|
d->rows = 12 + ((addr >> 5) & 0x03);
|
|
d->ranks = (org >> 3) & 0x03;
|
|
d->min_cas_latency = cas & 0x0f;
|
|
|
|
s->bl &= bl;
|
|
|
|
if (!s->bl) {
|
|
printk(BIOS_ERR, "no compatible burst length found\n");
|
|
return -1;
|
|
}
|
|
|
|
s->t_rc = MAX(s->t_rc, mtb2clks(d,
|
|
t_rc | ((t_ras_rc_h & 0xf0) << 4)));
|
|
s->t_rrd = MAX(s->t_rrd, mtb2clks(d, d->t_rrd));
|
|
s->t_rfc = MAX(s->t_rfc, mtb2clks(d, d->t_rfc));
|
|
s->t_rcd = MAX(s->t_rcd, mtb2clks(d, t_rcd));
|
|
s->t_cl = MAX(s->t_cl, mtb2clks(d, t_aa_min));
|
|
s->t_wr = MAX(s->t_wr, mtb2clks(d, t_wr));
|
|
s->t_rp = MAX(s->t_rp, mtb2clks(d, t_rp));
|
|
s->t_rtp = MAX(s->t_rtp, mtb2clks(d, t_rtp));
|
|
s->t_wtr = MAX(s->t_wtr, mtb2clks(d, t_wtr));
|
|
s->t_ras = MAX(s->t_ras, mtb2clks(d,
|
|
t_ras | ((t_ras_rc_h & 0x0f) << 8)));
|
|
s->t_r2r = MAX(s->t_r2r, bb & 3);
|
|
s->t_r2w = MAX(s->t_r2w, (bb >> 4) & 3);
|
|
s->t_w2r = MAX(s->t_w2r, (bb >> 2) & 3);
|
|
|
|
d->ranksize = (1 << (d->banks + d->columns + d->rows + 1)) >> 20;
|
|
dimmsize = d->ranksize * d->ranks;
|
|
d->branch->totalmem += dimmsize;
|
|
s->totalmem += dimmsize;
|
|
|
|
d->channel->columns = d->columns;
|
|
d->channel->rows = d->rows;
|
|
d->channel->ranks = d->ranks;
|
|
d->channel->banks = d->banks;
|
|
d->channel->width = d->sdram_width;
|
|
|
|
printk(BIOS_INFO, "DIMM %d/%d/%d %dMB: %d banks, "
|
|
"%d columns, %d rows, %d ranks\n",
|
|
d->branch->num, d->channel->num, d->num, dimmsize,
|
|
d->banks, d->columns, d->rows, d->ranks);
|
|
|
|
d->present = 1;
|
|
d->branch->used |= 1;
|
|
d->channel->used |= 1;
|
|
d->channel->highest_amb = d->num;
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_amb_smbus_write(struct i5000_fbdimm *d, int byte1, int byte2)
|
|
{
|
|
u16 status;
|
|
device_t dev = PCI_DEV(0, d->branch->num ? 22 : 21, 0);
|
|
int cmdreg = d->channel->num ? I5000_SPDCMD1 : I5000_SPDCMD0;
|
|
int stsreg = d->channel->num ? I5000_SPD1 : I5000_SPD0;
|
|
int timeout = 1000;
|
|
|
|
pci_write_config32(dev, cmdreg, 0xb8000000 | ((d->num & 0x03) << 24) |
|
|
(byte1 << 16) | (byte2 << 8) | 1);
|
|
|
|
while(((status = pci_read_config16(dev, stsreg)) & I5000_SPD_BUSY) && timeout--)
|
|
udelay(10);
|
|
|
|
if (status & I5000_SPD_WOD && timeout)
|
|
return 0;
|
|
|
|
printk(BIOS_ERR, "SMBus write failed: %d/%d/%d, byte1 %02x, byte2 %02x status %04x\n",
|
|
d->branch->num, d->channel->num, d->num, byte1, byte2, status);
|
|
for(;;);
|
|
return -1;
|
|
}
|
|
|
|
static int i5000_amb_smbus_read(struct i5000_fbdimm *d, int byte1, u8 *out)
|
|
{
|
|
u16 status;
|
|
device_t dev = PCI_DEV(0, d->branch->num ? 22 : 21, 0);
|
|
int cmdreg = d->channel->num ? I5000_SPDCMD1 : I5000_SPDCMD0;
|
|
int stsreg = d->channel->num ? I5000_SPD1 : I5000_SPD0;
|
|
int timeout = 1000;
|
|
|
|
pci_write_config32(dev, cmdreg, 0xb8000000 | ((d->num & 0x03) << 24) |
|
|
(byte1 << 16));
|
|
|
|
while(((status = pci_read_config16(dev, stsreg)) & I5000_SPD_BUSY) && timeout--)
|
|
udelay(10);
|
|
|
|
if ((status & I5000_SPD_RDO) && timeout)
|
|
*out = status & 0xff;
|
|
|
|
if (status & I5000_SPD_SBE || !timeout) {
|
|
printk(BIOS_ERR, "SMBus write failed: %d/%d/%d, byte1 %02x status %04x\n",
|
|
d->branch->num, d->channel->num, d->num, byte1, status);
|
|
return -1;
|
|
}
|
|
return 0;
|
|
|
|
}
|
|
|
|
static int i5000_amb_smbus_write_config8(struct i5000_fbdimm *d,
|
|
int fn, int reg, u8 val)
|
|
{
|
|
if (i5000_amb_smbus_write(d, 0x84, 00) ||
|
|
i5000_amb_smbus_write(d, 0x04, fn) ||
|
|
i5000_amb_smbus_write(d, 0x04, (reg >> 8) & 0xff) ||
|
|
i5000_amb_smbus_write(d, 0x04, reg & 0xff) ||
|
|
i5000_amb_smbus_write(d, 0x44, val)) {
|
|
printk(BIOS_ERR, "AMB SMBUS write failed\n");
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_amb_smbus_write_config16(struct i5000_fbdimm *d,
|
|
int fn, int reg, u16 val)
|
|
{
|
|
if (i5000_amb_smbus_write(d, 0x88, 00) ||
|
|
i5000_amb_smbus_write(d, 0x08, fn) ||
|
|
i5000_amb_smbus_write(d, 0x08, (reg >> 8) & 0xff) ||
|
|
i5000_amb_smbus_write(d, 0x08, reg & 0xff) ||
|
|
i5000_amb_smbus_write(d, 0x08, (val >> 8) & 0xff) ||
|
|
i5000_amb_smbus_write(d, 0x48, val & 0xff)) {
|
|
printk(BIOS_ERR, "AMB SMBUS write failed\n");
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_amb_smbus_write_config32(struct i5000_fbdimm *d,
|
|
int fn, int reg, u32 val)
|
|
{
|
|
if (i5000_amb_smbus_write(d, 0x8c, 00) ||
|
|
i5000_amb_smbus_write(d, 0x0c, fn) ||
|
|
i5000_amb_smbus_write(d, 0x0c, (reg >> 8) & 0xff) ||
|
|
i5000_amb_smbus_write(d, 0x0c, reg & 0xff) ||
|
|
i5000_amb_smbus_write(d, 0x0c, (val >> 24) & 0xff) ||
|
|
i5000_amb_smbus_write(d, 0x0c, (val >> 16) & 0xff) ||
|
|
i5000_amb_smbus_write(d, 0x0c, (val >> 8) & 0xff) ||
|
|
i5000_amb_smbus_write(d, 0x4c, val & 0xff)) {
|
|
printk(BIOS_ERR, "AMB SMBUS write failed\n");
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_amb_smbus_read_config32(struct i5000_fbdimm *d,
|
|
int fn, int reg, u32 *val)
|
|
{
|
|
u8 byte3, byte2, byte1, byte0;
|
|
|
|
if (i5000_amb_smbus_write(d, 0x80, 00) ||
|
|
i5000_amb_smbus_write(d, 0x00, fn) ||
|
|
i5000_amb_smbus_write(d, 0x00, (reg >> 8) & 0xff) ||
|
|
i5000_amb_smbus_write(d, 0x40, reg & 0xff) ||
|
|
i5000_amb_smbus_read(d, 0x80, &byte3) ||
|
|
i5000_amb_smbus_read(d, 0x00, &byte3) ||
|
|
i5000_amb_smbus_read(d, 0x00, &byte2) ||
|
|
i5000_amb_smbus_read(d, 0x00, &byte1) ||
|
|
i5000_amb_smbus_read(d, 0x40, &byte0)) {
|
|
printk(BIOS_ERR, "AMB SMBUS read failed\n");
|
|
return 1;
|
|
}
|
|
*val = (byte3 << 24) | (byte2 << 16) | (byte1 << 8) | byte0;
|
|
return 0;
|
|
}
|
|
|
|
static void i5000_amb_write_config8(struct i5000_fbdimm *d,
|
|
int fn, int reg, u32 val)
|
|
{
|
|
write8(DEFAULT_AMBASE + AMB_ADDR(d->ambase, fn, reg), val);
|
|
}
|
|
|
|
static void i5000_amb_write_config16(struct i5000_fbdimm *d,
|
|
int fn, int reg, u32 val)
|
|
{
|
|
write16(DEFAULT_AMBASE + AMB_ADDR(d->ambase, fn, reg), val);
|
|
}
|
|
|
|
static void i5000_amb_write_config32(struct i5000_fbdimm *d,
|
|
int fn, int reg, u32 val)
|
|
{
|
|
write32(DEFAULT_AMBASE + AMB_ADDR(d->ambase, fn, reg), val);
|
|
}
|
|
|
|
static u32 i5000_amb_read_config32(struct i5000_fbdimm *d,
|
|
int fn, int reg)
|
|
{
|
|
return read32(DEFAULT_AMBASE + AMB_ADDR(d->ambase, fn, reg));
|
|
}
|
|
|
|
static int ddr_command(struct i5000_fbdimm *d, int rank, u32 addr, u32 command)
|
|
{
|
|
u32 drc, status;
|
|
|
|
printk(BIOS_SPEW, "DIMM %d/%d/%d: rank %d: sending command %x (addr %08x)...",
|
|
d->branch->num, d->channel->num, d->num, rank, command, addr);
|
|
|
|
drc = i5000_amb_read_config32(d, 3, AMB_DRC);
|
|
drc &= ~((3 << 9) | (1 << 12));
|
|
drc |= (rank << 9);
|
|
|
|
command &= 0x0f;
|
|
command |= AMB_DCALCSR_START | (rank << 21);
|
|
|
|
printk(BIOS_DEBUG, "%s: AMB_DCALADDR: %08x AMB_DCALCSR: %08x\n", __func__, addr, command);
|
|
i5000_amb_write_config32(d, 3, AMB_DRC, drc);
|
|
i5000_amb_write_config32(d, 4, AMB_DCALADDR, addr);
|
|
i5000_amb_write_config32(d, 4, AMB_DCALCSR, command);
|
|
|
|
udelay(1000);
|
|
while((status = (i5000_amb_read_config32(d, 4, AMB_DCALCSR)))
|
|
& (1 << 31));
|
|
|
|
if (status & (1 << 30)) {
|
|
printk(BIOS_SPEW, "failed (status 0x%08x)\n", status);
|
|
return -1;
|
|
}
|
|
|
|
printk(BIOS_SPEW, "done\n");
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_ddr_calibration(struct i5000_fbdimm *d)
|
|
{
|
|
u32 status;
|
|
|
|
i5000_amb_write_config32(d, 3, AMB_MBADDR, 0);
|
|
i5000_amb_write_config32(d, 3, AMB_MBCSR, 0x80100050);
|
|
while((status = i5000_amb_read_config32(d, 3, AMB_MBCSR)) & (1 << 31));
|
|
|
|
i5000_amb_write_config32(d, 3, AMB_MBCSR, 0x80200050);
|
|
while((status = i5000_amb_read_config32(d, 3, AMB_MBCSR)) & (1 << 31));
|
|
|
|
if (ddr_command(d, d->ranks == 2 ? 3 : 1, 0, AMB_DCALCSR_OPCODE_RECV_ENABLE_CAL) ||
|
|
ddr_command(d, d->ranks == 2 ? 3 : 1, 0, AMB_DCALCSR_OPCODE_DQS_DELAY_CAL))
|
|
return -1;
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_ddr_init(struct i5000_fbdimm *d)
|
|
{
|
|
|
|
int rank;
|
|
u32 val;
|
|
u8 odt;
|
|
|
|
for(rank = 0; rank < d->ranks; rank++) {
|
|
printk(BIOS_DEBUG, "%s: %d/%d/%d rank %d\n", __func__,
|
|
d->branch->num, d->channel->num, d->num, rank);
|
|
|
|
if (ddr_command(d, 1 << rank,
|
|
0, AMB_DCALCSR_OPCODE_NOP))
|
|
return -1;
|
|
|
|
if (ddr_command(d, 1 << rank,
|
|
0x4000000, AMB_DCALCSR_OPCODE_PRECHARGE))
|
|
return -1;
|
|
|
|
/* EMRS(2) */
|
|
if (ddr_command(d, 1 << rank,
|
|
2, AMB_DCALCSR_OPCODE_MRS_EMRS))
|
|
return -1;
|
|
|
|
/* EMRS(3) */
|
|
if (ddr_command(d, 1 << rank,
|
|
3, AMB_DCALCSR_OPCODE_MRS_EMRS))
|
|
return -1;
|
|
|
|
/* EMRS(1) */
|
|
if (ddr_command(d, 1 << rank,
|
|
1, AMB_DCALCSR_OPCODE_MRS_EMRS))
|
|
return -1;
|
|
|
|
/* MRS: DLL reset */
|
|
if (ddr_command(d, 1 << rank,
|
|
0x1000000, AMB_DCALCSR_OPCODE_MRS_EMRS))
|
|
return -1;
|
|
|
|
udelay(20);
|
|
|
|
if (ddr_command(d, 1 << rank,
|
|
0x4000000, AMB_DCALCSR_OPCODE_PRECHARGE))
|
|
return -1;
|
|
|
|
if (ddr_command(d, 1 << rank,
|
|
0, AMB_DCALCSR_OPCODE_REFRESH))
|
|
return -1;
|
|
|
|
if (ddr_command(d, 1 << rank, 0,
|
|
AMB_DCALCSR_OPCODE_REFRESH))
|
|
return -1;
|
|
|
|
/* burst length + cas latency */
|
|
val = (((d->setup->bl & BL_BL8) ? 3 : 2) << 16) |
|
|
(1 << 19) /* interleaved burst */ |
|
|
(d->setup->t_cl << 20) |
|
|
(((d->setup->t_wr - 1) & 7) << 25);
|
|
|
|
printk(BIOS_DEBUG, "MRS: 0x%08x\n", val);
|
|
if (ddr_command(d, 1 << rank,
|
|
val, AMB_DCALCSR_OPCODE_MRS_EMRS))
|
|
return -1;
|
|
|
|
/* OCD calibration default */
|
|
if (ddr_command(d, 1 << rank, 0x03800001,
|
|
AMB_DCALCSR_OPCODE_MRS_EMRS))
|
|
return -1;
|
|
|
|
|
|
odt = d->odt;
|
|
if (rank)
|
|
odt >>= 4;
|
|
|
|
val = (d->setup->t_al << 19) |
|
|
((odt & 1) << 18) |
|
|
((odt & 2) << 21) | 1;
|
|
|
|
printk(BIOS_DEBUG, "EMRS(1): 0x%08x\n", val);
|
|
|
|
/* ODT, OCD exit, additive latency */
|
|
if (ddr_command(d, 1 << rank, val, AMB_DCALCSR_OPCODE_MRS_EMRS))
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_amb_preinit(struct i5000_fbdimm *d)
|
|
{
|
|
u32 *p32 = (u32 *)d->amb_personality_bytes;
|
|
u16 *p16 = (u16 *)d->amb_personality_bytes;
|
|
u32 id, drc, fbdsbcfg = 0x0909;
|
|
|
|
printk(BIOS_DEBUG, "%s: %d/%d/%d\n", __func__,
|
|
d->branch->num, d->channel->num, d->num);
|
|
|
|
i5000_amb_smbus_write_config32(d, 1, 0xb0, p32[0]);
|
|
i5000_amb_smbus_write_config16(d, 1, 0xb4, p16[2]);
|
|
|
|
drc = (d->setup->t_al << 4) | (d->setup->t_cl);
|
|
printk(BIOS_SPEW, "DRC: %02X, CMD2DATANXT: %02x\n", drc,
|
|
d->cmd2datanxt[d->setup->ddr_speed]);
|
|
|
|
switch(d->setup->ddr_speed) {
|
|
case DDR_533MHZ:
|
|
fbdsbcfg |= (1 << 16);
|
|
break;
|
|
case DDR_667MHZ:
|
|
fbdsbcfg |= (2 << 16);
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
printk(BIOS_DEBUG, "FBDSBCFGNXT: %08x\n", fbdsbcfg);
|
|
i5000_amb_smbus_write_config32(d, 1, AMB_FBDSBCFGNXT, fbdsbcfg);
|
|
i5000_amb_smbus_write_config32(d, 1, AMB_FBDLOCKTO, 0x1651);
|
|
i5000_amb_smbus_write_config8(d, 1, AMB_CMD2DATANXT,
|
|
d->cmd2datanxt[d->setup->ddr_speed]);
|
|
|
|
i5000_amb_smbus_write_config8(d, 3, AMB_DRC, drc);
|
|
|
|
if (!i5000_amb_smbus_read_config32(d, 0, 0, &id)) {
|
|
d->vendor = id & 0xffff;
|
|
d->device = id >> 16;
|
|
}
|
|
|
|
pci_write_config8(d->branch->branchdev,
|
|
d->channel->num ? I5000_FBDSBTXCFG1 : I5000_FBDSBTXCFG0, 0x04);
|
|
return 0;
|
|
}
|
|
|
|
static void i5000_fbd_next_state(struct i5000_fbd_branch *b, int state)
|
|
{
|
|
int timeout = 10000;
|
|
device_t dev = b->branchdev;
|
|
|
|
printk(BIOS_DEBUG, " FBD state branch %d: %02x,", b->num, state);
|
|
|
|
pci_write_config8(dev, I5000_FBDHPC, state);
|
|
|
|
printk(BIOS_DEBUG, "waiting for new state...");
|
|
|
|
while(pci_read_config8(dev, I5000_FBDST) != state && timeout--)
|
|
udelay(10);
|
|
|
|
if (timeout) {
|
|
printk(BIOS_DEBUG, "done\n");
|
|
return;
|
|
}
|
|
|
|
printk(BIOS_ERR, "timeout while entering state %02x on branch %d\n",
|
|
state, b->num);
|
|
}
|
|
|
|
static int i5000_wait_pattern_recognized(struct i5000_fbd_channel *c)
|
|
{
|
|
int i = 10;
|
|
device_t dev = PCI_ADDR(0, c->branch->num ? 22 : 21, 0,
|
|
c->num ? I5000_FBDISTS1 : I5000_FBDISTS0);
|
|
|
|
printk(BIOS_DEBUG, " waiting for pattern recognition...");
|
|
while(pci_read_config16(dev, 0) != 0x1fff && --i > 0)
|
|
udelay(5000);
|
|
|
|
printk(BIOS_DEBUG, i ? "done\n" : "failed\n");
|
|
printk(BIOS_DEBUG, "%d/%d Round trip latency: %d\n", c->branch->num, c->num,
|
|
pci_read_config8(c->branch->branchdev, c->num ? I5000_FBDLVL1 : I5000_FBDLVL0) & 0x3f);
|
|
return !i;
|
|
}
|
|
|
|
static const char *pattern_names[16] = {
|
|
"EI", "EI", "EI", "EI",
|
|
"EI", "EI", "EI", "EI",
|
|
"TS0", "TS1", "TS2", "TS3",
|
|
"RESERVED", "TS2 (merge disabled)", "TS2 (merge enabled)","All ones",
|
|
};
|
|
|
|
static int i5000_drive_pattern(struct i5000_fbd_channel *c, int pattern, int wait)
|
|
{
|
|
device_t dev = PCI_ADDR(0, c->branch->num ? 22 : 21, 0,
|
|
c->num ? I5000_FBDICMD1 : I5000_FBDICMD0);
|
|
|
|
printk(BIOS_DEBUG, " %d/%d driving pattern %s to AMB%d (%02x)\n",
|
|
c->branch->num, c->num,
|
|
pattern_names[(pattern >> 4) & 0xf], pattern & 3, pattern);
|
|
pci_write_config8(dev, 0, pattern);
|
|
|
|
if (!wait)
|
|
return 0;
|
|
|
|
return i5000_wait_pattern_recognized(c);
|
|
}
|
|
|
|
static int i5000_set_ambpresent(struct i5000_fbd_channel *c)
|
|
{
|
|
int i;
|
|
device_t branchdev = c->branch->branchdev;
|
|
u16 ambpresent = 0x8000;
|
|
|
|
for(i = 0; i < I5000_MAX_DIMM_PER_CHANNEL; i++) {
|
|
if (c->dimm[i].present)
|
|
ambpresent |= (1 << i);
|
|
}
|
|
|
|
printk(BIOS_DEBUG, "AMBPRESENT: %04x\n", ambpresent);
|
|
pci_write_config16(branchdev,
|
|
c->num ?
|
|
I5000_AMBPRESENT1 : \
|
|
I5000_AMBPRESENT0, ambpresent);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int i5000_drive_test_patterns(struct i5000_fbd_channel *c, int highest_amb, int mchpad)
|
|
{
|
|
device_t branchdev = c->branch->branchdev;
|
|
int off = c->num ? 0x100 : 0;
|
|
u32 portctl;
|
|
int i, cnt = 1000;
|
|
|
|
portctl = pci_read_config32(branchdev, I5000_FBD0IBPORTCTL + off);
|
|
portctl &= ~0x01000020;
|
|
if (mchpad)
|
|
portctl |= 0x00800000;
|
|
else
|
|
portctl &= ~0x00800000;
|
|
portctl &= ~0x01000020;
|
|
pci_write_config32(branchdev, I5000_FBD0IBPORTCTL + off, portctl);
|
|
|
|
/* drive calibration patterns */
|
|
if (i5000_drive_pattern(c, I5000_FBDICMD_TS0 | highest_amb, 1))
|
|
return -1;
|
|
|
|
if (i5000_drive_pattern(c, I5000_FBDICMD_TS1 | highest_amb, 1))
|
|
return -1;
|
|
|
|
while (!(pci_read_config32(branchdev, I5000_FBD0IBPORTCTL + off) & 4) && cnt--)
|
|
udelay(10);
|
|
|
|
if (!cnt) {
|
|
printk(BIOS_ERR, "IBIST timeout\n");
|
|
return -1;
|
|
}
|
|
|
|
if (i5000_drive_pattern(c, I5000_FBDICMD_TS2 | highest_amb, 1))
|
|
return -1;
|
|
|
|
for(i = 0; i < highest_amb; i++) {
|
|
if ((i5000_drive_pattern(c, I5000_FBDICMD_TS2_NOMERGE | i, 1)))
|
|
return -1;
|
|
}
|
|
|
|
if (i5000_drive_pattern(c, I5000_FBDICMD_TS2 | highest_amb, 1))
|
|
return -1;
|
|
|
|
if (i5000_drive_pattern(c, I5000_FBDICMD_TS3 | highest_amb, 1))
|
|
return -1;
|
|
|
|
if (i5000_set_ambpresent(c))
|
|
return -1;
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_train_channel_idle(struct i5000_fbd_channel *c)
|
|
{
|
|
int i;
|
|
u32 fbdsbcfg = 0x0b1b;
|
|
|
|
switch(c->setup->ddr_speed) {
|
|
case DDR_533MHZ:
|
|
fbdsbcfg |= (1 << 16);
|
|
break;
|
|
case DDR_667MHZ:
|
|
fbdsbcfg |= (2 << 16);
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
pci_write_config8(c->branch->branchdev,
|
|
c->num ? I5000_FBDSBTXCFG1 : I5000_FBDSBTXCFG0, 0x05);
|
|
|
|
for(i = 0; i < 4; i++) {
|
|
if (c->dimm[i].present)
|
|
i5000_amb_smbus_write_config32(c->dimm + i, 1, AMB_FBDSBCFGNXT, i ? (fbdsbcfg | 0x1000) : fbdsbcfg);
|
|
}
|
|
|
|
return i5000_drive_pattern(c, I5000_FBDICMD_IDLE, 1);
|
|
}
|
|
|
|
static int i5000_drive_test_patterns0(struct i5000_fbd_channel *c)
|
|
{
|
|
if (i5000_train_channel_idle(c))
|
|
return -1;
|
|
|
|
return i5000_drive_test_patterns(c, c->highest_amb, 0);
|
|
}
|
|
|
|
static int i5000_drive_test_patterns1(struct i5000_fbd_channel *c)
|
|
{
|
|
if (i5000_train_channel_idle(c))
|
|
return -1;
|
|
|
|
return i5000_drive_test_patterns(c, c->highest_amb, 1);
|
|
}
|
|
|
|
static int i5000_setup_channel(struct i5000_fbd_channel *c)
|
|
{
|
|
device_t branchdev = c->branch->branchdev;
|
|
int off = c->branch->num ? 0x100 : 0;
|
|
u32 val;
|
|
|
|
pci_write_config32(branchdev, I5000_FBD0IBTXPAT2EN + off, 0);
|
|
pci_write_config32(branchdev, I5000_FBD0IBTXPAT2EN + off, 0);
|
|
pci_write_config32(branchdev, I5000_FBD0IBTXMSK + off, 0x3ff);
|
|
pci_write_config32(branchdev, I5000_FBD0IBRXMSK + off, 0x1fff);
|
|
|
|
pci_write_config16(branchdev, off + 0x0162, c->used ? 0x20db : 0x18db);
|
|
|
|
/* unknown */
|
|
val = pci_read_config32(branchdev, off + 0x0164);
|
|
val &= 0xfffbcffc;
|
|
val |= 0x4004;
|
|
pci_write_config32(branchdev, off + 0x164, val);
|
|
|
|
pci_write_config32(branchdev, off + 0x15c, 0xff);
|
|
i5000_drive_pattern(c, I5000_FBDICMD_ALL_ONES, 0);
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_link_training0(struct i5000_fbd_branch *b)
|
|
{
|
|
device_t branchdev = b->branchdev;
|
|
|
|
pci_write_config8(branchdev, I5000_FBDPLLCTRL, b->used ? 0 : 1);
|
|
|
|
if (i5000_for_each_channel(b, i5000_setup_channel))
|
|
return -1;
|
|
|
|
if (i5000_for_each_channel(b, i5000_train_channel_idle))
|
|
return -1;
|
|
|
|
i5000_fbd_next_state(b, I5000_FBDHPC_STATE_INIT);
|
|
|
|
if (i5000_for_each_channel(b, i5000_drive_test_patterns0))
|
|
return -1;
|
|
|
|
i5000_fbd_next_state(b, I5000_FBDHPC_STATE_READY);
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_link_training1(struct i5000_fbd_branch *b)
|
|
{
|
|
if (i5000_for_each_channel(b, i5000_train_channel_idle))
|
|
return -1;
|
|
|
|
i5000_fbd_next_state(b, I5000_FBDHPC_STATE_INIT);
|
|
|
|
if (i5000_for_each_channel(b, i5000_drive_test_patterns1))
|
|
return -1;
|
|
|
|
i5000_fbd_next_state(b, I5000_FBDHPC_STATE_READY);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int i5000_amb_check(struct i5000_fbdimm *d)
|
|
{
|
|
u32 id = i5000_amb_read_config32(d, 0, 0);
|
|
|
|
printk(BIOS_DEBUG, "AMB %d/%d/%d ID: %04x:%04x\n",
|
|
d->branch->num, d->channel->num, d->num,
|
|
id & 0xffff, id >> 16);
|
|
|
|
if ((id & 0xffff) != d->vendor || id >> 16 != d->device) {
|
|
printk(BIOS_ERR, "AMB mapping failed\n");
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_amb_postinit(struct i5000_fbdimm *d)
|
|
{
|
|
u32 *p32 = (u32 *)d->amb_personality_bytes;
|
|
u16 *p16 = (u16 *)d->amb_personality_bytes;
|
|
|
|
i5000_amb_write_config16(d, 1, 0xb6, p16[3]);
|
|
i5000_amb_write_config32(d, 1, 0xb8, p32[2]);
|
|
i5000_amb_write_config16(d, 1, 0xbc, p16[6]);
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_amb_dram_timing_init(struct i5000_fbdimm *d)
|
|
{
|
|
struct i5000_fbd_setup *s;
|
|
u32 val, tref;
|
|
int refi;
|
|
|
|
s = d->setup;
|
|
|
|
printk(BIOS_DEBUG, "DIMM %d/%d/%d config:\n",
|
|
d->branch->num, d->channel->num, d->num);
|
|
|
|
val = 0x44;
|
|
printk(BIOS_DEBUG, "\tDDR2ODTC: 0x%02x\n", val);
|
|
i5000_amb_write_config8(d, 4, AMB_DDR2ODTC, val);
|
|
|
|
val = (0x0c << 24) | /* CLK control */
|
|
(1 << 18) | /* ODTZ enabled */
|
|
(((d->setup->bl & BL_BL8) ? 1 : 0) << 8) | /* 8 byte burst length supported */
|
|
((d->setup->t_al & 0x0f) << 4) | /* additive latency */
|
|
(d->setup->t_cl & 0x0f); /* CAS latency */
|
|
|
|
if (d->ranks > 1) {
|
|
val |= (0x03 << 9);
|
|
} else {
|
|
val |= (0x01 << 9);
|
|
}
|
|
|
|
printk(BIOS_DEBUG, "AMB_DRC: %08x\n", val);
|
|
i5000_amb_write_config32(d, 3, AMB_DRC, val);
|
|
|
|
val = (d->sdram_width << 30) |
|
|
((d->ranks == 2 ? 1 : 0) << 29) |
|
|
((d->banks == 8 ? 1 : 0) << 28) |
|
|
((d->rows - 13) << 26) |
|
|
((d->columns - 10) << 24) |
|
|
(1 << 16) | /* Auto refresh exit */
|
|
(0x27 << 8) | /* t_xsnr */
|
|
(d->setup->t_rp << 4) |
|
|
(((d->t_ck_min * d->mtb_dividend) / d->mtb_divisor) & 0x0f);
|
|
|
|
printk(BIOS_DEBUG, "\tAMB_DSREFTC: %08x\n", val);
|
|
i5000_amb_write_config32(d, 3, AMB_DSREFTC, val);
|
|
|
|
tref = 15;
|
|
|
|
switch(d->t_refi & 0x0f) {
|
|
case 0:
|
|
refi = 15625;
|
|
break;
|
|
case 1:
|
|
refi = 3900;
|
|
tref = 3;
|
|
break;
|
|
case 2:
|
|
refi = 7800;
|
|
tref = 7;
|
|
break;
|
|
case 3:
|
|
refi = 31250;
|
|
break;
|
|
case 4:
|
|
refi = 62500;
|
|
break;
|
|
case 5:
|
|
refi = 125000;
|
|
break;
|
|
default:
|
|
printk(BIOS_ERR, "unsupported t_refi value: %d, using 7.8us\n",
|
|
d->t_refi & 0x0f);
|
|
refi = 7800;
|
|
break;
|
|
}
|
|
|
|
s->t_ref = tref;
|
|
val = delay_ns_to_clocks(d, refi) | (s->t_rfc << 16);
|
|
|
|
printk(BIOS_DEBUG, "\tAMB_DAREFTC: %08x\n", val);
|
|
i5000_amb_write_config32(d, 3, AMB_DAREFTC, val);
|
|
|
|
u8 t_r2w = ((s->bl & BL_BL8) ? 4 : 2) +
|
|
(((d->t_ck_min * d->mtb_dividend) / d->mtb_divisor));
|
|
u8 t_w2r = (s->t_cl - 1) + ((s->bl & BL_BL8) ? 4 : 2) + s->t_wtr;
|
|
|
|
val = ((6 - s->t_rp) << 8) | ((6 - s->t_rcd) << 10) |
|
|
((26 - s->t_rc) << 12) | ((9 - s->t_wr) << 16) |
|
|
((12 - t_w2r) << 20) | ((10 - t_r2w) << 24) |
|
|
((s->t_rtp - 2) << 27);
|
|
|
|
switch(s->t_ras) {
|
|
case 15:
|
|
val |= (1 << 29);
|
|
break;
|
|
case 12:
|
|
val |= (2 << 29);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
printk(BIOS_DEBUG, "\tAMB_DRT: %08x\n", val);
|
|
i5000_amb_write_config32(d, 3, AMB_DRT, val);
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_do_amb_membist_start(struct i5000_fbdimm *d, int rank, int pattern)
|
|
{
|
|
printk(BIOS_DEBUG, "DIMM %d/%d/%d rank %d pattern %d\n",
|
|
d->branch->num, d->channel->num, d->num, rank, pattern);
|
|
|
|
i5000_amb_write_config32(d, 3, AMB_DAREFTC,
|
|
i5000_amb_read_config32(d, 3, AMB_DAREFTC) | 0x8000);
|
|
|
|
i5000_amb_write_config32(d, 3, AMB_MBLFSRSED, 0x12345678);
|
|
i5000_amb_write_config32(d, 3, AMB_MBADDR, 0);
|
|
i5000_amb_write_config32(d, 3, AMB_MBCSR, 0x800000f0 | (rank << 20) | ((pattern & 3) << 8));
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_do_amb_membist_status(struct i5000_fbdimm *d, int rank)
|
|
{
|
|
int cnt = 1000;
|
|
u32 res;
|
|
|
|
while((res = i5000_amb_read_config32(d, 3, AMB_MBCSR)) & (1 << 31) && cnt--)
|
|
udelay(1000);
|
|
|
|
if (cnt && !(res & (1 << 30)))
|
|
return 0;
|
|
|
|
printk(BIOS_ERR, "DIMM %d/%d/%d rank %d failed membist check\n",
|
|
d->branch->num, d->channel->num, d->num, rank);
|
|
return -1;
|
|
}
|
|
|
|
static int i5000_amb_membist_zero1_start(struct i5000_fbdimm *d)
|
|
{
|
|
if (i5000_do_amb_membist_start(d, 1, 0))
|
|
return -1;
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_amb_membist_zero2_start(struct i5000_fbdimm *d)
|
|
{
|
|
|
|
if (d->ranks < 2)
|
|
return 0;
|
|
if (i5000_do_amb_membist_start(d, 2, 0))
|
|
return -1;
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_amb_membist_status1(struct i5000_fbdimm *d)
|
|
{
|
|
if (i5000_do_amb_membist_status(d, 1))
|
|
return -1;
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_amb_membist_status2(struct i5000_fbdimm *d)
|
|
{
|
|
if (d->ranks < 2)
|
|
return 0;
|
|
|
|
if (i5000_do_amb_membist_status(d, 2))
|
|
return -1;
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_amb_membist_end(struct i5000_fbdimm *d)
|
|
{
|
|
printk(BIOS_DEBUG, "AMB_DRC MEMBIST: %08x\n", i5000_amb_read_config32(d, 3, AMB_DRC));
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_membist(struct i5000_fbd_setup *setup)
|
|
{
|
|
return i5000_for_each_dimm_present(setup, i5000_amb_membist_zero1_start) ||
|
|
i5000_for_each_dimm_present(setup, i5000_amb_membist_status1) ||
|
|
i5000_for_each_dimm_present(setup, i5000_amb_membist_zero2_start) ||
|
|
i5000_for_each_dimm_present(setup, i5000_amb_membist_status2) ||
|
|
i5000_for_each_dimm_present(setup, i5000_amb_membist_end);
|
|
}
|
|
|
|
static int i5000_enable_mc_autorefresh(struct i5000_fbdimm *d)
|
|
{
|
|
u32 tmp = i5000_amb_read_config32(d, 3, AMB_DSREFTC);
|
|
tmp &= ~(1 << 16);
|
|
printk(BIOS_DEBUG, "new AMB_DSREFTC: 0x%08x\n", tmp);
|
|
i5000_amb_write_config32(d, 3, AMB_DSREFTC, tmp);
|
|
return 0;
|
|
}
|
|
|
|
static int i5000_amb_clear_error_status(struct i5000_fbdimm *d)
|
|
{
|
|
i5000_amb_write_config32(d, 1, AMB_FERR, 9);
|
|
i5000_amb_write_config32(d, 1, AMB_NERR, 9);
|
|
i5000_amb_write_config32(d, 1, AMB_EMASK, 0xf2);
|
|
i5000_amb_write_config8(d, 3, 0x80, 0xcf);
|
|
i5000_amb_write_config8(d, 3, 0x81, 0xd3);
|
|
i5000_amb_write_config8(d, 3, 0x82, 0xf8);
|
|
return 0;
|
|
}
|
|
|
|
static void i5000_program_mtr(struct i5000_fbd_channel *c, int mtr)
|
|
{
|
|
u32 val;
|
|
|
|
if (c->dimm[0].present || c->dimm[1].present) {
|
|
val = (((c->columns - 10) & 3) |
|
|
(((c->rows - 13) & 3) << 2) |
|
|
(((c->ranks == 2) ? 1 : 0) << 4) |
|
|
(((c->banks == 8) ? 1 : 0) << 5) |
|
|
((c->width ? 1 : 0) << 6) |
|
|
(1 << 7) | /* Electrical Throttling enabled */
|
|
(1 << 8)); /* DIMM present and compatible */
|
|
printk(BIOS_DEBUG, "MTR0: %04x\n", val);
|
|
pci_write_config16(c->branch->branchdev, mtr, val);
|
|
}
|
|
|
|
if (c->dimm[2].present || c->dimm[3].present) {
|
|
val = (((c->columns - 10) & 3) |
|
|
(((c->rows - 13) & 3) << 4) |
|
|
((c->ranks ? 1 : 0) << 4) |
|
|
(((c->banks == 8) ? 1 : 0) << 5) |
|
|
((c->width ? 1 : 0) << 6) |
|
|
(1 << 7) | /* Electrical Throttling enabled */
|
|
(1 << 8)); /* DIMM present and compatible */
|
|
printk(BIOS_DEBUG, "MTR1: %04x\n", val);
|
|
pci_write_config16(c->branch->branchdev, mtr+2, val);
|
|
}
|
|
}
|
|
|
|
static int get_dmir(u8 *rankmap, int *_set, int limit)
|
|
{
|
|
int i, dmir = 0, set = 0;
|
|
|
|
for(i = 7; set < limit && i >= 0; i--) {
|
|
if (!(*rankmap & (1 << i)))
|
|
continue;
|
|
|
|
*rankmap &= ~(1 << i);
|
|
|
|
switch(limit) {
|
|
case 1:
|
|
dmir |= (i |
|
|
(i << 3) |
|
|
(i << 6) |
|
|
(i << 9));
|
|
break;
|
|
case 2:
|
|
dmir |= (i << (set * 3)) |
|
|
(i << (6 + set * 3));
|
|
break;
|
|
case 4:
|
|
dmir |= (i << (set * 3));
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
set++;
|
|
}
|
|
*_set = set;
|
|
return dmir;
|
|
}
|
|
|
|
static int i5000_setup_dmir(struct i5000_fbd_branch *b)
|
|
{
|
|
struct i5000_fbdimm *d;
|
|
device_t dev = b->branchdev;
|
|
u8 rankmap = 0, dmir = 0;
|
|
u32 dmirval = 0;
|
|
int i, set, rankoffset = 0, ranksize = 0, ranks = 0;
|
|
|
|
if (!b->used)
|
|
return 0;
|
|
|
|
for(i = 0; i < I5000_MAX_DIMM_PER_CHANNEL; i++) {
|
|
rankmap >>= 2;
|
|
d = b->channel[0].dimm + i;
|
|
|
|
if (!d->present)
|
|
continue;
|
|
|
|
if (d->ranks == 2) {
|
|
rankmap |= 0xc0;
|
|
ranks += 2;
|
|
} else {
|
|
rankmap |= 0x40;
|
|
ranks++;
|
|
}
|
|
}
|
|
|
|
printk(BIOS_DEBUG, "total ranks: %d, rankmap: %02x\n", ranks, rankmap);
|
|
|
|
dmir = I5000_DMIR0;
|
|
|
|
ranksize = b->channel[0].dimm[0].ranksize << 8;
|
|
|
|
if (!b->setup->single_channel)
|
|
ranksize <<= 1;
|
|
|
|
while(ranks) {
|
|
|
|
if (ranks >= 4)
|
|
dmirval = get_dmir(&rankmap, &set, 4);
|
|
else if (ranks >= 2)
|
|
dmirval = get_dmir(&rankmap, &set, 2);
|
|
else
|
|
dmirval = get_dmir(&rankmap, &set, 1);
|
|
|
|
ranks -= set;
|
|
|
|
dmirval |= rankoffset + (set * ranksize);
|
|
|
|
rankoffset += (set * ranksize);
|
|
|
|
printk(BIOS_DEBUG, "DMIR%d: %08x\n", (dmir - I5000_DMIR0) >> 2,
|
|
dmirval);
|
|
pci_write_config32(dev, dmir, dmirval);
|
|
dmir += 4;
|
|
}
|
|
|
|
for(; dmir <= I5000_DMIR4; dmir += 4) {
|
|
printk(BIOS_DEBUG, "DMIR%d: %08x\n", (dmir - I5000_DMIR0) >> 2,
|
|
dmirval);
|
|
pci_write_config32(dev, dmir, dmirval);
|
|
}
|
|
return rankoffset;
|
|
}
|
|
|
|
static void i5000_setup_interleave(struct i5000_fbd_setup *setup)
|
|
{
|
|
device_t dev16 = PCI_ADDR(0, 16, 1, 0);
|
|
u32 mir0, mir1, mir2, size0, size1, minsize, tmp;
|
|
|
|
size0 = i5000_setup_dmir(&setup->branch[1]) >> 12;
|
|
size1 = i5000_setup_dmir(&setup->branch[0]) >> 12;
|
|
|
|
minsize = MIN(size0, size1);
|
|
|
|
if (size0 > size1) {
|
|
tmp = size1;
|
|
size1 = size0;
|
|
size0 = tmp;
|
|
}
|
|
|
|
if (size0 == size1) {
|
|
mir0 = (size0 << 1) | 3;
|
|
mir1 = (size0 << 1);
|
|
mir2 = (size0 << 1);
|
|
} else if (!size0) {
|
|
mir0 = size1 | 1;
|
|
mir1 = size1;
|
|
mir2 = size1;
|
|
} else {
|
|
mir0 = (size0 << 1) | 3;
|
|
mir1 = (size1 + size0) | 1;
|
|
mir2 = size1 + size0;
|
|
}
|
|
|
|
printk(BIOS_DEBUG, "MIR0: %04x\n", mir0);
|
|
printk(BIOS_DEBUG, "MIR1: %04x\n", mir1);
|
|
printk(BIOS_DEBUG, "MIR2: %04x\n", mir2);
|
|
|
|
pci_write_config16(dev16, I5000_MIR0, mir0);
|
|
pci_write_config16(dev16, I5000_MIR1, mir1);
|
|
pci_write_config16(dev16, I5000_MIR2, mir2);
|
|
}
|
|
|
|
static int i5000_dram_timing_init(struct i5000_fbd_setup *setup)
|
|
{
|
|
device_t dev16 = PCI_ADDR(0, 16, 1, 0);
|
|
u32 tolm, drta, drtb, mc, mca;
|
|
int t_wrc, bl2;
|
|
|
|
bl2 = (setup->bl & BL_BL8) ? 4 :2;
|
|
t_wrc = setup->t_rcd + (setup->t_cl - 1) + bl2 +
|
|
setup->t_wr + setup->t_rp;
|
|
|
|
drta = (setup->t_ref & 0x0f) |
|
|
((setup->t_rrd & 0x0f) << 4) |
|
|
((setup->t_rfc & 0xff) << 8) |
|
|
((setup->t_rc & 0x3f) << 16) |
|
|
((t_wrc & 0x3f) << 22) |
|
|
(setup->t_al & 0x07) << 28;
|
|
|
|
drtb = (bl2) |
|
|
(((1 + bl2 + setup->t_r2r) & 0x0f) << 4) |
|
|
(((setup->t_cl - 1 + bl2 + setup->t_wtr) & 0x0f) << 8) |
|
|
(((2 + bl2 + setup->t_r2w) & 0x0f) << 12) |
|
|
(((bl2 + setup->t_w2rdr) & 0x07) << 16);
|
|
|
|
mc = (1 << 30) | /* enable retry */
|
|
(3 << 25) | /* bad RAM threshold */
|
|
(1 << 21) | /* INITDONE */
|
|
(1 << 20) | /* FSB enable */
|
|
/* Electrical throttling: 20 clocks */
|
|
((setup->ddr_speed == DDR_667MHZ ? 1 : 0) << 18) |
|
|
(1 << 8) | /* enhanced scrub mode */
|
|
(1 << 7) | /* enable patrol scrub */
|
|
(1 << 6) | /* enable demand scrubing */
|
|
(1 << 5); /* enable northbound error detection */
|
|
|
|
printk(BIOS_DEBUG, "DRTA: 0x%08x DRTB: 0x%08x MC: 0x%08x\n", drta, drtb, mc);
|
|
pci_write_config32(dev16, I5000_DRTA, drta);
|
|
pci_write_config32(dev16, I5000_DRTB, drtb);
|
|
pci_write_config32(dev16, I5000_MC, mc);
|
|
|
|
mca = pci_read_config32(dev16, I5000_MCA);
|
|
|
|
mca |= (7 << 28);
|
|
if (setup->single_channel)
|
|
mca |= (1 << 14);
|
|
else
|
|
mca &= ~(1 << 14);
|
|
printk(BIOS_DEBUG, "MCA: 0x%08x\n", mca);
|
|
pci_write_config32(dev16, I5000_MCA, mca);
|
|
|
|
pci_write_config32(dev16, I5000_ERRPERR, 0xffffffff);
|
|
|
|
i5000_program_mtr(&setup->branch[0].channel[0], I5000_MTR0);
|
|
i5000_program_mtr(&setup->branch[0].channel[1], I5000_MTR1);
|
|
i5000_program_mtr(&setup->branch[1].channel[0], I5000_MTR0);
|
|
i5000_program_mtr(&setup->branch[1].channel[1], I5000_MTR1);
|
|
|
|
i5000_setup_interleave(setup);
|
|
|
|
if ((tolm = MIN(setup->totalmem, 0xd00)) > 0xd00)
|
|
tolm = 0xd00;
|
|
|
|
tolm <<= 4;
|
|
printk(BIOS_DEBUG, "TOLM: 0x%04x\n", tolm);
|
|
pci_write_config16(dev16, I5000_TOLM, tolm);
|
|
return 0;
|
|
}
|
|
|
|
static void i5000_init_setup(struct i5000_fbd_setup *setup)
|
|
{
|
|
int branch, channel, dimm, i = 0;
|
|
struct i5000_fbdimm *d;
|
|
struct i5000_fbd_channel *c;
|
|
struct i5000_fbd_branch *b;
|
|
|
|
setup->bl = 3;
|
|
/* default to highest memory frequency. If a module doesn't
|
|
support it, it will decrease this setting in spd_read */
|
|
setup->ddr_speed = DDR_667MHZ;
|
|
|
|
for(branch = 0; branch < I5000_MAX_BRANCH; branch++) {
|
|
b = setup->branch + branch;
|
|
b->branchdev = PCI_ADDR(0, branch ? 22 : 21, 0, 0);
|
|
b->setup = setup;
|
|
b->num = branch;
|
|
|
|
for(channel = 0; channel < I5000_MAX_CHANNEL; channel++) {
|
|
c = b->channel + channel;
|
|
c->branch = b;
|
|
c->setup = setup;
|
|
c->num = channel;
|
|
|
|
for(dimm = 0; dimm < I5000_MAX_DIMM_PER_CHANNEL; dimm++) {
|
|
d = c->dimm + dimm;
|
|
setup->dimms[i++] = d;
|
|
d->channel = c;
|
|
d->branch = b;
|
|
d->setup = setup;
|
|
d->num = dimm;
|
|
d->ambase = (b->num << 16) | (c->num << 15) | (dimm << 11);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void i5000_reserved_register_init(struct i5000_fbd_setup *setup)
|
|
{
|
|
/* register write captured from vendor BIOS, but undocument by Intel */
|
|
pci_write_config32(PCI_ADDR(0, 16, 0, 0), I5000_PROCENABLE, 0x487f7c);
|
|
|
|
pci_write_config32(PCI_ADDR(0, 16, 0, 0), 0xf4, 0x1588106);
|
|
pci_write_config32(PCI_ADDR(0, 16, 0, 0), 0xfc, 0x80);
|
|
pci_write_config32(PCI_ADDR(0, 16, 1, 0), 0x5c, 0x08);
|
|
pci_write_config32(PCI_ADDR(0, 16, 0, 0), 0x70, 0xfe2c08d);
|
|
pci_write_config32(PCI_ADDR(0, 16, 0, 0), 0x78, 0xfe2c08d);
|
|
|
|
pci_write_config32(PCI_ADDR(0, 16, 0, 0), 0x140, 0x18000000);
|
|
pci_write_config32(PCI_ADDR(0, 16, 0, 0), 0x440, 0x18000000);
|
|
pci_write_config32(PCI_ADDR(0, 17, 0, 0), 0x18c, 0x18000000);
|
|
pci_write_config32(PCI_ADDR(0, 16, 1, 0), 0x180, 0x18000000);
|
|
pci_write_config32(PCI_ADDR(0, 17, 0, 0), 0x180, 0x87ffffff);
|
|
|
|
pci_write_config32(PCI_ADDR(0, 0, 0, 0), 0x200, 0x18000000);
|
|
pci_write_config32(PCI_ADDR(0, 4, 0, 0), 0x200, 0x18000000);
|
|
pci_write_config32(PCI_ADDR(0, 0, 0, 0), 0x208, 0x18000000);
|
|
pci_write_config32(PCI_ADDR(0, 4, 0, 0), 0x208, 0x18000000);
|
|
|
|
pci_write_config32(PCI_ADDR(0, 17, 0, 0), 0x184, 0x01249249);
|
|
pci_write_config32(PCI_ADDR(0, 17, 0, 0), 0x154, 0x00000000);
|
|
pci_write_config32(PCI_ADDR(0, 17, 0, 0), 0x158, 0x02492492);
|
|
pci_write_config32(PCI_ADDR(0, 17, 0, 0), 0x15c, 0x00000000);
|
|
pci_write_config32(PCI_ADDR(0, 17, 0, 0), 0x160, 0x00000000);
|
|
|
|
pci_write_config16(PCI_ADDR(0, 19, 0, 0), 0x0090, 0x00000007);
|
|
pci_write_config16(PCI_ADDR(0, 19, 0, 0), 0x0092, 0x0000000f);
|
|
|
|
pci_write_config8(PCI_ADDR(0, 16, 0, 0), 0x0154, 0x10);
|
|
pci_write_config8(PCI_ADDR(0, 16, 0, 0), 0x0454, 0x10);
|
|
|
|
pci_write_config32(PCI_ADDR(0, 19, 0, 0), 0x007C, 0x00000001);
|
|
pci_write_config32(PCI_ADDR(0, 19, 0, 0), 0x007C, 0x00000000);
|
|
pci_write_config32(PCI_ADDR(0, 17, 0, 0), 0x0108, 0x000003F0);
|
|
pci_write_config32(PCI_ADDR(0, 17, 0, 0), 0x010C, 0x00000042);
|
|
pci_write_config16(PCI_ADDR(0, 17, 0, 0), 0x0112, 0x0000);
|
|
pci_write_config32(PCI_ADDR(0, 17, 0, 0), 0x0114, 0x00A0494C);
|
|
pci_write_config32(PCI_ADDR(0, 17, 0, 0), 0x0118, 0x0002134C);
|
|
pci_write_config32(PCI_ADDR(0, 17, 0, 0), 0x013C, 0x0C008000);
|
|
pci_write_config32(PCI_ADDR(0, 17, 0, 0), 0x0140, 0x0C008000);
|
|
pci_write_config32(PCI_ADDR(0, 17, 0, 0), 0x0144, 0x00008000);
|
|
pci_write_config32(PCI_ADDR(0, 17, 0, 0), 0x0148, 0x00008000);
|
|
pci_write_config32(PCI_ADDR(0, 19, 0, 0), 0x007C, 0x00000002);
|
|
pci_write_config32(PCI_ADDR(0, 16, 1, 0), 0x01F4, 0x00000800);
|
|
|
|
if (setup->branch[0].channel[0].used)
|
|
pci_write_config32(PCI_ADDR(0, 21, 0, 0), 0x010C, 0x004C0C10);
|
|
|
|
if (setup->branch[0].channel[1].used)
|
|
pci_write_config32(PCI_ADDR(0, 21, 0, 0), 0x020C, 0x004C0C10);
|
|
|
|
if (setup->branch[1].channel[0].used)
|
|
pci_write_config32(PCI_ADDR(0, 22, 0, 0), 0x010C, 0x004C0C10);
|
|
|
|
if (setup->branch[1].channel[1].used)
|
|
pci_write_config32(PCI_ADDR(0, 22, 0, 0), 0x020C, 0x004C0C10);
|
|
}
|
|
static void i5000_dump_error_registers(void)
|
|
{
|
|
device_t dev = PCI_ADDR(0, 16, 1, 0);
|
|
|
|
printk(BIOS_ERR, "Dump of FBD error registers:\n"
|
|
"FERR_FAT_FBD: 0x%08x NERR_FAT_FBD: 0x%08x\n"
|
|
"FERR_NF_FBD: 0x%08x NERR_NF_FBD: 0x%08x\n"
|
|
"EMASK_FBD: 0x%08x\n"
|
|
"ERR0_FBD: 0x%08x\n"
|
|
"ERR1_FBD: 0x%08x\n"
|
|
"ERR2_FBD: 0x%08x\n"
|
|
"MC_ERR_FBD: 0x%08x\n",
|
|
pci_read_config32(dev, I5000_FERR_FAT_FBD),
|
|
pci_read_config32(dev, I5000_NERR_FAT_FBD),
|
|
pci_read_config32(dev, I5000_FERR_NF_FBD),
|
|
pci_read_config32(dev, I5000_NERR_NF_FBD),
|
|
pci_read_config32(dev, I5000_EMASK_FBD),
|
|
pci_read_config32(dev, I5000_ERR0_FBD),
|
|
pci_read_config32(dev, I5000_ERR1_FBD),
|
|
pci_read_config32(dev, I5000_ERR2_FBD),
|
|
pci_read_config32(dev, I5000_MCERR_FBD));
|
|
|
|
printk(BIOS_ERR, "Non recoverable error registers:\n"
|
|
"NRECMEMA: 0x%08x NRECMEMB: 0x%08x\n"
|
|
"NRECFGLOG: 0x%08x\n",
|
|
pci_read_config32(dev, I5000_NRECMEMA),
|
|
pci_read_config32(dev, I5000_NRECMEMB),
|
|
pci_read_config32(dev, I5000_NRECFGLOG));
|
|
|
|
printk(BIOS_ERR, "Packet data:\n"
|
|
"NRECFBDA: 0x%08x\n"
|
|
"NRECFBDB: 0x%08x\n"
|
|
"NRECFBDC: 0x%08x\n"
|
|
"NRECFBDD: 0x%08x\n"
|
|
"NRECFBDE: 0x%08x\n",
|
|
pci_read_config32(dev, I5000_NRECFBDA),
|
|
pci_read_config32(dev, I5000_NRECFBDB),
|
|
pci_read_config32(dev, I5000_NRECFBDC),
|
|
pci_read_config32(dev, I5000_NRECFBDD),
|
|
pci_read_config32(dev, I5000_NRECFBDE));
|
|
|
|
printk(BIOS_ERR, "recoverable error registers:\n"
|
|
"RECMEMA: 0x%08x RECMEMB: 0x%08x\n"
|
|
"RECFGLOG: 0x%08x\n",
|
|
pci_read_config32(dev, I5000_RECMEMA),
|
|
pci_read_config32(dev, I5000_RECMEMB),
|
|
pci_read_config32(dev, I5000_RECFGLOG));
|
|
|
|
printk(BIOS_ERR, "Packet data:\n"
|
|
"RECFBDA: 0x%08x\n"
|
|
"RECFBDB: 0x%08x\n"
|
|
"RECFBDC: 0x%08x\n"
|
|
"RECFBDD: 0x%08x\n"
|
|
"RECFBDE: 0x%08x\n",
|
|
pci_read_config32(dev, I5000_RECFBDA),
|
|
pci_read_config32(dev, I5000_RECFBDB),
|
|
pci_read_config32(dev, I5000_RECFBDC),
|
|
pci_read_config32(dev, I5000_RECFBDD),
|
|
pci_read_config32(dev, I5000_RECFBDE));
|
|
|
|
}
|
|
|
|
static void i5000_try_restart(const char *msg)
|
|
{
|
|
printk(BIOS_INFO, msg);
|
|
i5000_dump_error_registers();
|
|
outb(0x06, 0xcf9);
|
|
for(;;) asm volatile("hlt");
|
|
}
|
|
|
|
static void i5000_pam_setup(void)
|
|
{
|
|
pci_write_config8(PCI_ADDR(0, 16, 0, 0), 0x59, 0x30);
|
|
pci_write_config8(PCI_ADDR(0, 16, 0, 0), 0x5a, 0x33);
|
|
pci_write_config8(PCI_ADDR(0, 16, 0, 0), 0x5b, 0x33);
|
|
pci_write_config8(PCI_ADDR(0, 16, 0, 0), 0x5c, 0x33);
|
|
pci_write_config8(PCI_ADDR(0, 16, 0, 0), 0x5d, 0x33);
|
|
pci_write_config8(PCI_ADDR(0, 16, 0, 0), 0x5e, 0x33);
|
|
pci_write_config8(PCI_ADDR(0, 16, 0, 0), 0x5f, 0x33);
|
|
}
|
|
|
|
static int i5000_setup_clocking(struct i5000_fbd_setup *setup)
|
|
{
|
|
int fbd, fsb, ddrfrq, ddrfrqnow;
|
|
msr_t msr;
|
|
device_t dev = PCI_ADDR(0, 16, 1, 0);
|
|
|
|
switch(setup->ddr_speed) {
|
|
case DDR_667MHZ:
|
|
fbd = 667;
|
|
break;
|
|
case DDR_533MHZ:
|
|
fbd = 533;
|
|
break;
|
|
default:
|
|
printk(BIOS_ERR, "%s: unsupported FBD speed\n", __func__);
|
|
return 1;
|
|
}
|
|
|
|
/* mainboard specific callback */
|
|
if (mainboard_set_fbd_clock(fbd)) {
|
|
printk(BIOS_ERR, "%s: failed to set FBD speed\n", __func__);
|
|
return 1;
|
|
}
|
|
|
|
msr = rdmsr(MSR_FSB_FREQ);
|
|
|
|
switch(msr.lo & 7) {
|
|
case 1:
|
|
fsb = 533;
|
|
break;
|
|
case 4:
|
|
fsb = 667;
|
|
break;
|
|
default:
|
|
printk(BIOS_ERR, "%s: unsupported FSB speed: %d\n", __func__, msr.lo & 7);
|
|
return 1;
|
|
}
|
|
|
|
|
|
ddrfrq = pci_read_config8(PCI_ADDR(0, 16, 1, 0), 0x56);
|
|
ddrfrqnow = ddrfrq;
|
|
ddrfrq &= ~0x3;
|
|
|
|
if (fsb < fbd)
|
|
ddrfrq |= 2;
|
|
else if (fsb > fbd)
|
|
ddrfrq |= 3;
|
|
|
|
switch((ddrfrq >> 4) & 3) {
|
|
case 0: /* 1:1 mapping */
|
|
pci_write_config32(dev, I5000_FBDTOHOSTGRCFG0, 0xffffffff);
|
|
pci_write_config32(dev, I5000_FBDTOHOSTGRCFG1, 0x00000000);
|
|
pci_write_config32(dev, I5000_HOSTTOFBDGRCFG, 0xffffffff);
|
|
pci_write_config8(dev, I5000_GRFBDLVLDCFG, 0x00);
|
|
pci_write_config8(dev, I5000_GRHOSTFULLCFG, 0x00);
|
|
pci_write_config8(dev, I5000_GRBUBBLECFG, 0x00);
|
|
pci_write_config8(dev, I5000_GRFBDTOHOSTDBLCFG, 0x00);
|
|
break;
|
|
case 2: /* 4:5 mapping */
|
|
pci_write_config32(dev, I5000_FBDTOHOSTGRCFG0, 0x00002323);
|
|
pci_write_config32(dev, I5000_FBDTOHOSTGRCFG1, 0x00000400);
|
|
pci_write_config32(dev, I5000_HOSTTOFBDGRCFG, 0x23023);
|
|
pci_write_config8(dev, I5000_GRFBDLVLDCFG, 0x04);
|
|
pci_write_config8(dev, I5000_GRHOSTFULLCFG, 0x08);
|
|
pci_write_config8(dev, I5000_GRBUBBLECFG, 0x00);
|
|
pci_write_config8(dev, I5000_GRFBDTOHOSTDBLCFG, 0x04);
|
|
break;
|
|
case 3:
|
|
/* 5:4 mapping */
|
|
pci_write_config32(dev, I5000_FBDTOHOSTGRCFG0, 0x00023230);
|
|
pci_write_config32(dev, I5000_FBDTOHOSTGRCFG1, 0x00000000);
|
|
pci_write_config32(dev, I5000_HOSTTOFBDGRCFG, 0x4323);
|
|
pci_write_config8(dev, I5000_GRFBDLVLDCFG, 0x00);
|
|
pci_write_config8(dev, I5000_GRHOSTFULLCFG, 0x02);
|
|
pci_write_config8(dev, I5000_GRBUBBLECFG, 0x10);
|
|
pci_write_config8(dev, I5000_GRFBDTOHOSTDBLCFG, 0x00);
|
|
break;
|
|
default:
|
|
printk(BIOS_DEBUG, "invalid DDRFRQ: %02x\n", ddrfrq);
|
|
return -1;
|
|
}
|
|
|
|
if (ddrfrq != ddrfrqnow) {
|
|
printk(BIOS_DEBUG, "old DDRFRQ: 0x%02x new DDRFRQ: 0x%02x\n",
|
|
ddrfrqnow, ddrfrq);
|
|
pci_write_config8(PCI_ADDR(0, 16, 1, 0), 0x56, ddrfrq);
|
|
/* FSB:FBD mapping changed, needs hard reset */
|
|
outb(0x06, 0xcf9);
|
|
for(;;) asm volatile("hlt");
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void i5000_fbdimm_init(void)
|
|
{
|
|
struct i5000_fbd_setup setup;
|
|
u32 mca, mc;
|
|
|
|
memset(&setup, 0, sizeof(setup));
|
|
|
|
pci_write_config16(PCI_ADDR(0, 0, 0, 0), 0x4, 0x144);
|
|
|
|
i5000_init_setup(&setup);
|
|
|
|
pci_write_config32(PCI_DEV(0, 16, 0), 0xf0,
|
|
pci_read_config32(PCI_ADDR(0, 16, 0, 0), 0xf0) | 0x8000);
|
|
|
|
i5000_clear_fbd_errors();
|
|
|
|
printk(BIOS_INFO, "detecting memory modules\n");
|
|
if (i5000_for_each_dimm(&setup, i5000_read_spd_data)) {
|
|
printk(BIOS_ERR, "%s: failed to read SPD data\n", __func__);
|
|
return;
|
|
}
|
|
|
|
if (i5000_setup_clocking(&setup)) {
|
|
printk(BIOS_ERR, "%s: failed to set FBD clock\n", __func__);
|
|
return;
|
|
}
|
|
|
|
/* posted CAS requires t_AL = t_RCD - 1 */
|
|
setup.t_al = setup.t_rcd - 1;
|
|
|
|
printk(BIOS_DEBUG, "global timing parameters:\n"
|
|
"CL: %d RAS: %d WRC: %d RC: %d RFC: %d RRD: %d REF: %d W2RDR: %d\n"
|
|
"R2W: %d W2R: %d R2R: %d W2W: %d WTR: %d RCD: %d RP %d WR: %d RTP: %d AL: %d\n",
|
|
setup.t_cl, setup.t_ras, setup.t_wrc, setup.t_rc, setup.t_rfc,
|
|
setup.t_rrd, setup.t_ref, setup.t_w2rdr, setup.t_r2w, setup.t_w2r,
|
|
setup.t_r2r, setup.t_w2w, setup.t_wtr, setup.t_rcd,
|
|
setup.t_rp, setup.t_wr, setup.t_rtp, setup.t_al);
|
|
|
|
setup.single_channel = (!(setup.branch[0].channel[1].used ||
|
|
setup.branch[1].channel[0].used ||
|
|
setup.branch[1].channel[1].used));
|
|
|
|
pci_write_config32(PCI_ADDR(0, 16, 1, 0), 0x019C, 0x8010c);
|
|
pci_write_config32(PCI_ADDR(0, 16, 1, 0), 0x01F4, 0);
|
|
|
|
/* enable or disable single channel mode */
|
|
mca = pci_read_config32(PCI_ADDR(0, 16, 1, 0), I5000_MCA);
|
|
if (setup.single_channel)
|
|
mca |= (1 << 14);
|
|
else
|
|
mca &= ~(1 << 14);
|
|
pci_write_config32(PCI_ADDR(0, 16, 1, 0), I5000_MCA, mca);
|
|
|
|
/*
|
|
* i5000 supports burst length 8 only in single channel mode
|
|
* so strip BL_BL8 if we're operating in multichannel mode
|
|
*/
|
|
|
|
if (!setup.single_channel)
|
|
setup.bl &= ~BL_BL8;
|
|
|
|
if (!setup.bl)
|
|
die("No supported burst length found\n");
|
|
|
|
mc = pci_read_config32(PCI_ADDR(0, 16, 1, 0), I5000_MC);
|
|
/* disable error checking for training */
|
|
pci_write_config32(PCI_ADDR(0, 16, 1, 0), I5000_MC, mc & ~0x20);
|
|
|
|
printk(BIOS_INFO, "performing fbd link initialization...");
|
|
if (i5000_for_each_branch(&setup, i5000_branch_reset) ||
|
|
i5000_for_each_dimm_present(&setup, i5000_amb_preinit) ||
|
|
i5000_for_each_branch(&setup, i5000_link_training0) ||
|
|
i5000_for_each_dimm_present(&setup, i5000_amb_check) ||
|
|
i5000_for_each_dimm_present(&setup, i5000_amb_postinit) ||
|
|
i5000_for_each_branch(&setup, i5000_link_training1)) {
|
|
i5000_try_restart("failed\n");
|
|
}
|
|
printk(BIOS_INFO, "done\n");
|
|
printk(BIOS_INFO, "initializing memory...");
|
|
|
|
if (i5000_for_each_dimm_present(&setup, i5000_ddr_init) ||
|
|
i5000_for_each_dimm_present(&setup, i5000_amb_dram_timing_init) ||
|
|
i5000_for_each_dimm_present(&setup, i5000_ddr_calibration)) {
|
|
i5000_try_restart("failed\n");
|
|
}
|
|
printk(BIOS_INFO,"done\n");
|
|
printk(BIOS_INFO, "clearing memory...");
|
|
|
|
if (i5000_membist(&setup))
|
|
i5000_try_restart("failed\n");
|
|
else
|
|
printk(BIOS_INFO, "done\n");
|
|
|
|
if (i5000_for_each_dimm_present(&setup, i5000_enable_mc_autorefresh))
|
|
i5000_try_restart("failed to enable auto refresh\n");
|
|
|
|
i5000_fbd_next_state(&setup.branch[0], I5000_FBDHPC_STATE_INIT);
|
|
i5000_fbd_next_state(&setup.branch[1], I5000_FBDHPC_STATE_INIT);
|
|
|
|
if (i5000_for_each_branch(&setup, i5000_link_training0))
|
|
i5000_try_restart("Channel training failed\n");
|
|
|
|
if (setup.branch[0].used)
|
|
i5000_fbd_next_state(&setup.branch[0], I5000_FBDHPC_STATE_READY);
|
|
|
|
if (setup.branch[1].used)
|
|
i5000_fbd_next_state(&setup.branch[1], I5000_FBDHPC_STATE_READY);
|
|
|
|
i5000_clear_fbd_errors();
|
|
|
|
/* enable error checking */
|
|
pci_write_config32(PCI_ADDR(0, 16, 1, 0), I5000_MC, mc | 0x20);
|
|
|
|
i5000_dram_timing_init(&setup);
|
|
|
|
i5000_reserved_register_init(&setup);
|
|
|
|
i5000_pam_setup();
|
|
|
|
if (i5000_for_each_dimm_present(&setup, i5000_amb_clear_error_status))
|
|
i5000_try_restart("failed to clear error status\n");
|
|
|
|
if (setup.branch[0].used)
|
|
i5000_fbd_next_state(&setup.branch[0], I5000_FBDHPC_STATE_ACTIVE);
|
|
|
|
if (setup.branch[1].used)
|
|
i5000_fbd_next_state(&setup.branch[1], I5000_FBDHPC_STATE_ACTIVE);
|
|
|
|
#if CONFIG_NORTHBRIDGE_INTEL_I5000_RAM_CHECK
|
|
if (ram_check_nodie(0x000000, 0x0a0000) ||
|
|
ram_check_nodie(0x100000, MIN(setup.totalmem * 1048576, 0xd0000000))) {
|
|
i5000_try_restart("RAM verification failed");
|
|
|
|
}
|
|
#endif
|
|
|
|
printk(BIOS_INFO, "Memory initialization finished\n");
|
|
}
|