- Rename chip_config chip_operations throughout the tree - Fix Config.lb on most of the Opteron Ports - Fix the amd 8000 chipset support for setting the subsystem vendor and device ids - Add detection of devices that are on the motherboard (i.e. In Config.lb) - Baby step in getting the resource limit handling correct, Ignore fixed resources - Only call enable_childrens_resources on devices we know will have children For some busses like i2c it is non-sense and we don't want it. - Set the resource limits for pnp devices resources. - Improve the resource size detection for pnp devices. - Added a configuration register to amd8111_ide.c so we can enable/disable individual ide channels - Added a header file to hold the prototype of isa_dma_init - Fixed most of the superio chips so the should work now, the via superio pci device is the exception. - The code compiles and runs so it is time for me to go to bed. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1698 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
197 lines
4.9 KiB
C
197 lines
4.9 KiB
C
/*
|
|
* (C) 2003 Linux Networx, SuSE Linux AG
|
|
*/
|
|
#include <console/console.h>
|
|
#include <device/device.h>
|
|
#include <device/pci.h>
|
|
#include <device/pci_ids.h>
|
|
#include <device/pci_ops.h>
|
|
#include <pc80/mc146818rtc.h>
|
|
#include <pc80/isa-dma.h>
|
|
#include "amd8111.h"
|
|
|
|
#define NMI_OFF 0
|
|
|
|
struct ioapicreg {
|
|
unsigned int reg;
|
|
unsigned int value_low, value_high;
|
|
};
|
|
|
|
static struct ioapicreg ioapicregvalues[] = {
|
|
#define ALL (0xff << 24)
|
|
#define NONE (0)
|
|
#define DISABLED (1 << 16)
|
|
#define ENABLED (0 << 16)
|
|
#define TRIGGER_EDGE (0 << 15)
|
|
#define TRIGGER_LEVEL (1 << 15)
|
|
#define POLARITY_HIGH (0 << 13)
|
|
#define POLARITY_LOW (1 << 13)
|
|
#define PHYSICAL_DEST (0 << 11)
|
|
#define LOGICAL_DEST (1 << 11)
|
|
#define ExtINT (7 << 8)
|
|
#define NMI (4 << 8)
|
|
#define SMI (2 << 8)
|
|
#define INT (1 << 8)
|
|
/* IO-APIC virtual wire mode configuration */
|
|
/* mask, trigger, polarity, destination, delivery, vector */
|
|
{ 0, ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT, NONE},
|
|
{ 1, DISABLED, NONE},
|
|
{ 2, DISABLED, NONE},
|
|
{ 3, DISABLED, NONE},
|
|
{ 4, DISABLED, NONE},
|
|
{ 5, DISABLED, NONE},
|
|
{ 6, DISABLED, NONE},
|
|
{ 7, DISABLED, NONE},
|
|
{ 8, DISABLED, NONE},
|
|
{ 9, DISABLED, NONE},
|
|
{ 10, DISABLED, NONE},
|
|
{ 11, DISABLED, NONE},
|
|
{ 12, DISABLED, NONE},
|
|
{ 13, DISABLED, NONE},
|
|
{ 14, DISABLED, NONE},
|
|
{ 15, DISABLED, NONE},
|
|
{ 16, DISABLED, NONE},
|
|
{ 17, DISABLED, NONE},
|
|
{ 18, DISABLED, NONE},
|
|
{ 19, DISABLED, NONE},
|
|
{ 20, DISABLED, NONE},
|
|
{ 21, DISABLED, NONE},
|
|
{ 22, DISABLED, NONE},
|
|
{ 23, DISABLED, NONE},
|
|
/* Be careful and don't write past the end... */
|
|
};
|
|
|
|
static void setup_ioapic(void)
|
|
{
|
|
int i;
|
|
unsigned long value_low, value_high;
|
|
unsigned long ioapic_base = 0xfec00000;
|
|
volatile unsigned long *l;
|
|
struct ioapicreg *a = ioapicregvalues;
|
|
|
|
l = (unsigned long *) ioapic_base;
|
|
|
|
for (i = 0; i < sizeof(ioapicregvalues) / sizeof(ioapicregvalues[0]);
|
|
i++, a++) {
|
|
l[0] = (a->reg * 2) + 0x10;
|
|
l[4] = a->value_low;
|
|
value_low = l[4];
|
|
l[0] = (a->reg *2) + 0x11;
|
|
l[4] = a->value_high;
|
|
value_high = l[4];
|
|
if ((i==0) && (value_low == 0xffffffff)) {
|
|
printk_warning("IO APIC not responding.\n");
|
|
return;
|
|
}
|
|
printk_spew("for IRQ, reg 0x%08x value 0x%08x 0x%08x\n",
|
|
a->reg, a->value_low, a->value_high);
|
|
}
|
|
}
|
|
|
|
static void enable_hpet(struct device *dev)
|
|
{
|
|
unsigned long hpet_address;
|
|
|
|
pci_write_config32(dev,0xa0, 0xfed00001);
|
|
hpet_address=pci_read_config32(dev,0xa0)& 0xfffffffe;
|
|
printk_debug("enabling HPET @0x%x\n", hpet_address);
|
|
}
|
|
|
|
static void lpc_init(struct device *dev)
|
|
{
|
|
uint8_t byte;
|
|
int pwr_on=-1;
|
|
int nmi_option;
|
|
|
|
/* IO APIC initialization */
|
|
byte = pci_read_config8(dev, 0x4B);
|
|
byte |= 1;
|
|
pci_write_config8(dev, 0x4B, byte);
|
|
setup_ioapic();
|
|
|
|
/* posted memory write enable */
|
|
byte = pci_read_config8(dev, 0x46);
|
|
pci_write_config8(dev, 0x46, byte | (1<<0));
|
|
|
|
/* power after power fail */
|
|
byte = pci_read_config8(dev, 0x43);
|
|
if (pwr_on) {
|
|
byte &= ~(1<<6);
|
|
} else {
|
|
byte |= (1<<6);
|
|
}
|
|
pci_write_config8(dev, 0x43, byte);
|
|
|
|
/* Enable Port 92 fast reset */
|
|
byte = pci_read_config8(dev, 0x41);
|
|
byte |= (1 << 5);
|
|
pci_write_config8(dev, 0x41, byte);
|
|
|
|
/* Enable Error reporting */
|
|
/* Set up sync flood detected */
|
|
byte = pci_read_config8(dev, 0x47);
|
|
byte |= (1 << 1);
|
|
pci_write_config8(dev, 0x47, byte);
|
|
|
|
/* Set up NMI on errors */
|
|
byte = pci_read_config8(dev, 0x40);
|
|
byte |= (1 << 1); /* clear PW2LPC error */
|
|
byte |= (1 << 6); /* clear LPCERR */
|
|
pci_write_config8(dev, 0x40, byte);
|
|
nmi_option = NMI_OFF;
|
|
get_option(&nmi_option, "nmi");
|
|
if (nmi_option) {
|
|
byte |= (1 << 7); /* set NMI */
|
|
pci_write_config8(dev, 0x40, byte);
|
|
}
|
|
|
|
/* Initialize the real time clock */
|
|
rtc_init(0);
|
|
|
|
/* Initialize isa dma */
|
|
isa_dma_init();
|
|
|
|
/* Initialize the High Precision Event Timers */
|
|
enable_hpet(dev);
|
|
}
|
|
|
|
static void amd8111_lpc_read_resources(device_t dev)
|
|
{
|
|
struct resource *res;
|
|
|
|
/* Get the normal pci resources of this device */
|
|
pci_dev_read_resources(dev);
|
|
|
|
/* Add an extra subtractive resource for both memory and I/O */
|
|
res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
|
|
res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
|
|
|
|
res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
|
|
res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
|
|
}
|
|
|
|
|
|
static void lpci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
|
|
{
|
|
pci_write_config32(dev, 0x70,
|
|
((device & 0xffff) << 16) | (vendor & 0xffff));
|
|
}
|
|
static struct pci_operations lops_pci = {
|
|
.set_subsystem = lpci_set_subsystem,
|
|
};
|
|
static struct device_operations lpc_ops = {
|
|
.read_resources = amd8111_lpc_read_resources,
|
|
.set_resources = pci_dev_set_resources,
|
|
.enable_resources = pci_dev_enable_resources,
|
|
.init = lpc_init,
|
|
.scan_bus = scan_static_bus,
|
|
.enable = amd8111_enable,
|
|
.ops_pci = &lops_pci,
|
|
};
|
|
|
|
static struct pci_driver lpc_driver __pci_driver = {
|
|
.ops = &lpc_ops,
|
|
.vendor = PCI_VENDOR_ID_AMD,
|
|
.device = PCI_DEVICE_ID_AMD_8111_ISA,
|
|
};
|