The Infineon SLB 9672 on newer Clevo machines regularly fails TPM Resume
on S3 with the error `TPM_RC_VALUE`.
Per TPM2 spec, handle the failure by performing a TPM Restart.
> The startup behavior defined by this specification is different than
> TPM 1.2 with respect to Startup(STATE). A TPM 1.2 device will enter
> Failure Mode if no state is available when the TPM receives
> Startup(STATE). This is not the case in this specification. It is up
> to the CRTM to take corrective action if it the TPM returns
> TPM_RC_VALUE in response to Startup(STATE).
Fixes the following error from being repeatedly logged in Linux:
> kernel: tpm tpm0: A TPM error (256) occurred attempting get random
Ref: Trusted Platform Module Library, Part 1: Architecture, rev 1.59
Change-Id: I3388007d4448c93bd0dda591c8ca7d1a8dc5306b
Signed-off-by: Tim Crawford <tcrawford@system76.com>
70657e373f