sravan/system76-coreboot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
system76-coreboot/src/northbridge/amd/amdk8/raminit.c
Ronald G. Minnich ebb645a9fb YhLu's changes to resolve several memory and other problems. 
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1036 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-07-25 03:05:54 +00:00

2304 lines
64 KiB
C
Raw Blame History

#include <cpu/k8/mtrr.h>
#include "raminit.h"
/* Function 2 */
#define DRAM_CSBASE 0x40
#define DRAM_CSMASK 0x60
#define DRAM_BANK_ADDR_MAP 0x80
#define DRAM_TIMING_LOW 0x88
#define DTL_TCL_SHIFT 0
#define DTL_TCL_MASK 0x7
#define DTL_CL_2 1
#define DTL_CL_3 2
#define DTL_CL_2_5 5
#define DTL_TRC_SHIFT 4
#define DTL_TRC_MASK 0xf
#define DTL_TRC_BASE 7
#define DTL_TRC_MIN 7
#define DTL_TRC_MAX 22
#define DTL_TRFC_SHIFT 8
#define DTL_TRFC_MASK 0xf
#define DTL_TRFC_BASE 9
#define DTL_TRFC_MIN 9
#define DTL_TRFC_MAX 24
#define DTL_TRCD_SHIFT 12
#define DTL_TRCD_MASK 0x7
#define DTL_TRCD_BASE 0
#define DTL_TRCD_MIN 2
#define DTL_TRCD_MAX 6
#define DTL_TRRD_SHIFT 16
#define DTL_TRRD_MASK 0x7
#define DTL_TRRD_BASE 0
#define DTL_TRRD_MIN 2
#define DTL_TRRD_MAX 4
#define DTL_TRAS_SHIFT 20
#define DTL_TRAS_MASK 0xf
#define DTL_TRAS_BASE 0
#define DTL_TRAS_MIN 5
#define DTL_TRAS_MAX 15
#define DTL_TRP_SHIFT 24
#define DTL_TRP_MASK 0x7
#define DTL_TRP_BASE 0
#define DTL_TRP_MIN 2
#define DTL_TRP_MAX 6
#define DTL_TWR_SHIFT 28
#define DTL_TWR_MASK 0x1
#define DTL_TWR_BASE 2
#define DTL_TWR_MIN 2
#define DTL_TWR_MAX 3
#define DRAM_TIMING_HIGH 0x8c
#define DTH_TWTR_SHIFT 0
#define DTH_TWTR_MASK 0x1
#define DTH_TWTR_BASE 1
#define DTH_TWTR_MIN 1
#define DTH_TWTR_MAX 2
#define DTH_TRWT_SHIFT 4
#define DTH_TRWT_MASK 0x7
#define DTH_TRWT_BASE 1
#define DTH_TRWT_MIN 1
#define DTH_TRWT_MAX 6
#define DTH_TREF_SHIFT 8
#define DTH_TREF_MASK 0x1f
#define DTH_TREF_100MHZ_4K 0x00
#define DTH_TREF_133MHZ_4K 0x01
#define DTH_TREF_166MHZ_4K 0x02
#define DTH_TREF_200MHZ_4K 0x03
#define DTH_TREF_100MHZ_8K 0x08
#define DTH_TREF_133MHZ_8K 0x09
#define DTH_TREF_166MHZ_8K 0x0A
#define DTH_TREF_200MHZ_8K 0x0B
#define DTH_TWCL_SHIFT 20
#define DTH_TWCL_MASK 0x7
#define DTH_TWCL_BASE 1
#define DTH_TWCL_MIN 1
#define DTH_TWCL_MAX 2
#define DRAM_CONFIG_LOW 0x90
#define DCL_DLL_Disable (1<<0)
#define DCL_D_DRV (1<<1)
#define DCL_QFC_EN (1<<2)
#define DCL_DisDqsHys (1<<3)
#define DCL_DramInit (1<<8)
#define DCL_DramEnable (1<<10)
#define DCL_MemClrStatus (1<<11)
#define DCL_ESR (1<<12)
#define DCL_SRS (1<<13)
#define DCL_128BitEn (1<<16)
#define DCL_DimmEccEn (1<<17)
#define DCL_UnBufDimm (1<<18)
#define DCL_32ByteEn (1<<19)
#define DCL_x4DIMM_SHIFT 20
#define DRAM_CONFIG_HIGH 0x94
#define DCH_ASYNC_LAT_SHIFT 0
#define DCH_ASYNC_LAT_MASK 0xf
#define DCH_ASYNC_LAT_BASE 0
#define DCH_ASYNC_LAT_MIN 0
#define DCH_ASYNC_LAT_MAX 15
#define DCH_RDPREAMBLE_SHIFT 8
#define DCH_RDPREAMBLE_MASK 0xf
#define DCH_RDPREAMBLE_BASE ((2<<1)+0) /* 2.0 ns */
#define DCH_RDPREAMBLE_MIN ((2<<1)+0) /* 2.0 ns */
#define DCH_RDPREAMBLE_MAX ((9<<1)+1) /* 9.5 ns */
#define DCH_IDLE_LIMIT_SHIFT 16
#define DCH_IDLE_LIMIT_MASK 0x7
#define DCH_IDLE_LIMIT_0 0
#define DCH_IDLE_LIMIT_4 1
#define DCH_IDLE_LIMIT_8 2
#define DCH_IDLE_LIMIT_16 3
#define DCH_IDLE_LIMIT_32 4
#define DCH_IDLE_LIMIT_64 5
#define DCH_IDLE_LIMIT_128 6
#define DCH_IDLE_LIMIT_256 7
#define DCH_DYN_IDLE_CTR_EN (1 << 19)
#define DCH_MEMCLK_SHIFT 20
#define DCH_MEMCLK_MASK 0x7
#define DCH_MEMCLK_100MHZ 0
#define DCH_MEMCLK_133MHZ 2
#define DCH_MEMCLK_166MHZ 5
#define DCH_MEMCLK_200MHZ 7
#define DCH_MEMCLK_VALID (1 << 25)
#define DCH_MEMCLK_EN0 (1 << 26)
#define DCH_MEMCLK_EN1 (1 << 27)
#define DCH_MEMCLK_EN2 (1 << 28)
#define DCH_MEMCLK_EN3 (1 << 29)
/* Function 3 */
#define SCRUB_CONTROL 0x58
#define SCRUB_NONE 0
#define SCRUB_40ns 1
#define SCRUB_80ns 2
#define SCRUB_160ns 3
#define SCRUB_320ns 4
#define SCRUB_640ns 5
#define SCRUB_1_28us 6
#define SCRUB_2_56us 7
#define SCRUB_5_12us 8
#define SCRUB_10_2us 9
#define SCRUB_20_5us 10
#define SCRUB_41_0us 11
#define SCRUB_81_9us 12
#define SCRUB_163_8us 13
#define SCRUB_327_7us 14
#define SCRUB_655_4us 15
#define SCRUB_1_31ms 16
#define SCRUB_2_62ms 17
#define SCRUB_5_24ms 18
#define SCRUB_10_49ms 19
#define SCRUB_20_97ms 20
#define SCRUB_42ms 21
#define SCRUB_84ms 22
#define SC_DRAM_SCRUB_RATE_SHFIT 0
#define SC_DRAM_SCRUB_RATE_MASK 0x1f
#define SC_L2_SCRUB_RATE_SHIFT 8
#define SC_L2_SCRUB_RATE_MASK 0x1f
#define SC_L1D_SCRUB_RATE_SHIFT 16
#define SC_L1D_SCRUB_RATE_MASK 0x1f
#define SCRUB_ADDR_LOW 0x5C
#define SCRUB_ADDR_HIGH 0x60
#define NORTHBRIDGE_CAP 0xE8
#define NBCAP_128Bit 0x0001
#define NBCAP_MP 0x0002
#define NBCAP_BIG_MP 0x0004
#define NBCAP_ECC 0x0004
#define NBCAP_CHIPKILL_ECC 0x0010
#define NBCAP_MEMCLK_SHIFT 5
#define NBCAP_MEMCLK_MASK 3
#define NBCAP_MEMCLK_100MHZ 3
#define NBCAP_MEMCLK_133MHZ 2
#define NBCAP_MEMCLK_166MHZ 1
#define NBCAP_MEMCLK_200MHZ 0
#define NBCAP_MEMCTRL 0x0100
static void setup_resource_map(const unsigned int *register_values, int max)
{
int i;
print_debug("setting up resource map....\r\n");
for(i = 0; i < max; i += 3) {
device_t dev;
unsigned where;
unsigned long reg;
#if 0
print_debug_hex32(register_values[i]);
print_debug(" <-");
print_debug_hex32(register_values[i+2]);
print_debug("\r\n");
#endif
dev = register_values[i] & ~0xff;
where = register_values[i] & 0xff;
reg = pci_read_config32(dev, where);
reg &= register_values[i+1];
reg |= register_values[i+2];
pci_write_config32(dev, where, reg);
#if 0
reg = pci_read_config32(register_values[i]);
reg &= register_values[i+1];
reg |= register_values[i+2] & ~register_values[i+1];
pci_write_config32(register_values[i], reg);
#endif
}
print_debug("done.\r\n");
}
static void setup_default_resource_map(void)
{
static const unsigned int register_values[] = {
/* Careful set limit registers before base registers which contain the enables */
/* DRAM Limit i Registers
* F1:0x44 i = 0
* F1:0x4C i = 1
* F1:0x54 i = 2
* F1:0x5C i = 3
* F1:0x64 i = 4
* F1:0x6C i = 5
* F1:0x74 i = 6
* F1:0x7C i = 7
* [ 2: 0] Destination Node ID
* 000 = Node 0
* 001 = Node 1
* 010 = Node 2
* 011 = Node 3
* 100 = Node 4
* 101 = Node 5
* 110 = Node 6
* 111 = Node 7
* [ 7: 3] Reserved
* [10: 8] Interleave select
* specifies the values of A[14:12] to use with interleave enable.
* [15:11] Reserved
* [31:16] DRAM Limit Address i Bits 39-24
* This field defines the upper address bits of a 40 bit address
* that define the end of the DRAM region.
*/
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
/* DRAM Base i Registers
* F1:0x40 i = 0
* F1:0x48 i = 1
* F1:0x50 i = 2
* F1:0x58 i = 3
* F1:0x60 i = 4
* F1:0x68 i = 5
* F1:0x70 i = 6
* F1:0x78 i = 7
* [ 0: 0] Read Enable
* 0 = Reads Disabled
* 1 = Reads Enabled
* [ 1: 1] Write Enable
* 0 = Writes Disabled
* 1 = Writes Enabled
* [ 7: 2] Reserved
* [10: 8] Interleave Enable
* 000 = No interleave
* 001 = Interleave on A[12] (2 nodes)
* 010 = reserved
* 011 = Interleave on A[12] and A[14] (4 nodes)
* 100 = reserved
* 101 = reserved
* 110 = reserved
* 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
* [15:11] Reserved
* [13:16] DRAM Base Address i Bits 39-24
* This field defines the upper address bits of a 40-bit address
* that define the start of the DRAM region.
*/
PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
/* Memory-Mapped I/O Limit i Registers
* F1:0x84 i = 0
* F1:0x8C i = 1
* F1:0x94 i = 2
* F1:0x9C i = 3
* F1:0xA4 i = 4
* F1:0xAC i = 5
* F1:0xB4 i = 6
* F1:0xBC i = 7
* [ 2: 0] Destination Node ID
* 000 = Node 0
* 001 = Node 1
* 010 = Node 2
* 011 = Node 3
* 100 = Node 4
* 101 = Node 5
* 110 = Node 6
* 111 = Node 7
* [ 3: 3] Reserved
* [ 5: 4] Destination Link ID
* 00 = Link 0
* 01 = Link 1
* 10 = Link 2
* 11 = Reserved
* [ 6: 6] Reserved
* [ 7: 7] Non-Posted
* 0 = CPU writes may be posted
* 1 = CPU writes must be non-posted
* [31: 8] Memory-Mapped I/O Limit Address i (39-16)
* This field defines the upp adddress bits of a 40-bit address that
* defines the end of a memory-mapped I/O region n
*/
PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
/* Memory-Mapped I/O Base i Registers
* F1:0x80 i = 0
* F1:0x88 i = 1
* F1:0x90 i = 2
* F1:0x98 i = 3
* F1:0xA0 i = 4
* F1:0xA8 i = 5
* F1:0xB0 i = 6
* F1:0xB8 i = 7
* [ 0: 0] Read Enable
* 0 = Reads disabled
* 1 = Reads Enabled
* [ 1: 1] Write Enable
* 0 = Writes disabled
* 1 = Writes Enabled
* [ 2: 2] Cpu Disable
* 0 = Cpu can use this I/O range
* 1 = Cpu requests do not use this I/O range
* [ 3: 3] Lock
* 0 = base/limit registers i are read/write
* 1 = base/limit registers i are read-only
* [ 7: 4] Reserved
* [31: 8] Memory-Mapped I/O Base Address i (39-16)
* This field defines the upper address bits of a 40bit address
* that defines the start of memory-mapped I/O region i
*/
PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
/* PCI I/O Limit i Registers
* F1:0xC4 i = 0
* F1:0xCC i = 1
* F1:0xD4 i = 2
* F1:0xDC i = 3
* [ 2: 0] Destination Node ID
* 000 = Node 0
* 001 = Node 1
* 010 = Node 2
* 011 = Node 3
* 100 = Node 4
* 101 = Node 5
* 110 = Node 6
* 111 = Node 7
* [ 3: 3] Reserved
* [ 5: 4] Destination Link ID
* 00 = Link 0
* 01 = Link 1
* 10 = Link 2
* 11 = reserved
* [11: 6] Reserved
* [24:12] PCI I/O Limit Address i
* This field defines the end of PCI I/O region n
* [31:25] Reserved
*/
PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
/* PCI I/O Base i Registers
* F1:0xC0 i = 0
* F1:0xC8 i = 1
* F1:0xD0 i = 2
* F1:0xD8 i = 3
* [ 0: 0] Read Enable
* 0 = Reads Disabled
* 1 = Reads Enabled
* [ 1: 1] Write Enable
* 0 = Writes Disabled
* 1 = Writes Enabled
* [ 3: 2] Reserved
* [ 4: 4] VGA Enable
* 0 = VGA matches Disabled
* 1 = matches all address < 64K and where A[9:0] is in the
* range 3B0-3BB or 3C0-3DF independen of the base & limit registers
* [ 5: 5] ISA Enable
* 0 = ISA matches Disabled
* 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
* from matching agains this base/limit pair
* [11: 6] Reserved
* [24:12] PCI I/O Base i
* This field defines the start of PCI I/O region n
* [31:25] Reserved
*/
PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
/* Config Base and Limit i Registers
* F1:0xE0 i = 0
* F1:0xE4 i = 1
* F1:0xE8 i = 2
* F1:0xEC i = 3
* [ 0: 0] Read Enable
* 0 = Reads Disabled
* 1 = Reads Enabled
* [ 1: 1] Write Enable
* 0 = Writes Disabled
* 1 = Writes Enabled
* [ 2: 2] Device Number Compare Enable
* 0 = The ranges are based on bus number
* 1 = The ranges are ranges of devices on bus 0
* [ 3: 3] Reserved
* [ 6: 4] Destination Node
* 000 = Node 0
* 001 = Node 1
* 010 = Node 2
* 011 = Node 3
* 100 = Node 4
* 101 = Node 5
* 110 = Node 6
* 111 = Node 7
* [ 7: 7] Reserved
* [ 9: 8] Destination Link
* 00 = Link 0
* 01 = Link 1
* 10 = Link 2
* 11 - Reserved
* [15:10] Reserved
* [23:16] Bus Number Base i
* This field defines the lowest bus number in configuration region i
* [31:24] Bus Number Limit i
* This field defines the highest bus number in configuration regin i
*/
PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
};
int max;
max = sizeof(register_values)/sizeof(register_values[0]);
setup_resource_map(register_values, max);
}
static void sdram_set_registers(const struct mem_controller *ctrl)
{
static const unsigned int register_values[] = {
/* Careful set limit registers before base registers which contain the enables */
/* DRAM Limit i Registers
* F1:0x44 i = 0
* F1:0x4C i = 1
* F1:0x54 i = 2
* F1:0x5C i = 3
* F1:0x64 i = 4
* F1:0x6C i = 5
* F1:0x74 i = 6
* F1:0x7C i = 7
* [ 2: 0] Destination Node ID
* 000 = Node 0
* 001 = Node 1
* 010 = Node 2
* 011 = Node 3
* 100 = Node 4
* 101 = Node 5
* 110 = Node 6
* 111 = Node 7
* [ 7: 3] Reserved
* [10: 8] Interleave select
* specifies the values of A[14:12] to use with interleave enable.
* [15:11] Reserved
* [31:16] DRAM Limit Address i Bits 39-24
* This field defines the upper address bits of a 40 bit address
* that define the end of the DRAM region.
*/
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
/* DRAM Base i Registers
* F1:0x40 i = 0
* F1:0x48 i = 1
* F1:0x50 i = 2
* F1:0x58 i = 3
* F1:0x60 i = 4
* F1:0x68 i = 5
* F1:0x70 i = 6
* F1:0x78 i = 7
* [ 0: 0] Read Enable
* 0 = Reads Disabled
* 1 = Reads Enabled
* [ 1: 1] Write Enable
* 0 = Writes Disabled
* 1 = Writes Enabled
* [ 7: 2] Reserved
* [10: 8] Interleave Enable
* 000 = No interleave
* 001 = Interleave on A[12] (2 nodes)
* 010 = reserved
* 011 = Interleave on A[12] and A[14] (4 nodes)
* 100 = reserved
* 101 = reserved
* 110 = reserved
* 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
* [15:11] Reserved
* [13:16] DRAM Base Address i Bits 39-24
* This field defines the upper address bits of a 40-bit address
* that define the start of the DRAM region.
*/
PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
/* DRAM CS Base Address i Registers
* F2:0x40 i = 0
* F2:0x44 i = 1
* F2:0x48 i = 2
* F2:0x4C i = 3
* F2:0x50 i = 4
* F2:0x54 i = 5
* F2:0x58 i = 6
* F2:0x5C i = 7
* [ 0: 0] Chip-Select Bank Enable
* 0 = Bank Disabled
* 1 = Bank Enabled
* [ 8: 1] Reserved
* [15: 9] Base Address (19-13)
* An optimization used when all DIMM are the same size...
* [20:16] Reserved
* [31:21] Base Address (35-25)
* This field defines the top 11 addresses bit of a 40-bit
* address that define the memory address space. These
* bits decode 32-MByte blocks of memory.
*/
PCI_ADDR(0, 0x18, 2, 0x40), 0x001f01fe, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x50), 0x001f01fe, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x54), 0x001f01fe, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x58), 0x001f01fe, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x5C), 0x001f01fe, 0x00000000,
/* DRAM CS Mask Address i Registers
* F2:0x60 i = 0
* F2:0x64 i = 1
* F2:0x68 i = 2
* F2:0x6C i = 3
* F2:0x70 i = 4
* F2:0x74 i = 5
* F2:0x78 i = 6
* F2:0x7C i = 7
* Select bits to exclude from comparison with the DRAM Base address register.
* [ 8: 0] Reserved
* [15: 9] Address Mask (19-13)
* Address to be excluded from the optimized case
* [20:16] Reserved
* [29:21] Address Mask (33-25)
* The bits with an address mask of 1 are excluded from address comparison
* [31:30] Reserved
*
*/
PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x70), 0xC01f01ff, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x74), 0xC01f01ff, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x78), 0xC01f01ff, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x7C), 0xC01f01ff, 0x00000000,
/* DRAM Bank Address Mapping Register
* F2:0x80
* Specify the memory module size
* [ 2: 0] CS1/0
* [ 6: 4] CS3/2
* [10: 8] CS5/4
* [14:12] CS7/6
* 000 = 32Mbyte (Rows = 12 & Col = 8)
* 001 = 64Mbyte (Rows = 12 & Col = 9)
* 010 = 128Mbyte (Rows = 13 & Col = 9)|(Rows = 12 & Col = 10)
* 011 = 256Mbyte (Rows = 13 & Col = 10)|(Rows = 12 & Col = 11)
* 100 = 512Mbyte (Rows = 13 & Col = 11)|(Rows = 14 & Col = 10)
* 101 = 1Gbyte (Rows = 14 & Col = 11)|(Rows = 13 & Col = 12)
* 110 = 2Gbyte (Rows = 14 & Col = 12)
* 111 = reserved
* [ 3: 3] Reserved
* [ 7: 7] Reserved
* [11:11] Reserved
* [31:15]
*/
PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000000,
/* DRAM Timing Low Register
* F2:0x88
* [ 2: 0] Tcl (Cas# Latency, Cas# to read-data-valid)
* 000 = reserved
* 001 = CL 2
* 010 = CL 3
* 011 = reserved
* 100 = reserved
* 101 = CL 2.5
* 110 = reserved
* 111 = reserved
* [ 3: 3] Reserved
* [ 7: 4] Trc (Row Cycle Time, Ras#-active to Ras#-active/bank auto refresh)
* 0000 = 7 bus clocks
* 0001 = 8 bus clocks
* ...
* 1110 = 21 bus clocks
* 1111 = 22 bus clocks
* [11: 8] Trfc (Row refresh Cycle time, Auto-refresh-active to RAS#-active or RAS#auto-refresh)
* 0000 = 9 bus clocks
* 0010 = 10 bus clocks
* ....
* 1110 = 23 bus clocks
* 1111 = 24 bus clocks
* [14:12] Trcd (Ras#-active to Case#-read/write Delay)
* 000 = reserved
* 001 = reserved
* 010 = 2 bus clocks
* 011 = 3 bus clocks
* 100 = 4 bus clocks
* 101 = 5 bus clocks
* 110 = 6 bus clocks
* 111 = reserved
* [15:15] Reserved
* [18:16] Trrd (Ras# to Ras# Delay)
* 000 = reserved
* 001 = reserved
* 010 = 2 bus clocks
* 011 = 3 bus clocks
* 100 = 4 bus clocks
* 101 = reserved
* 110 = reserved
* 111 = reserved
* [19:19] Reserved
* [23:20] Tras (Minmum Ras# Active Time)
* 0000 to 0100 = reserved
* 0101 = 5 bus clocks
* ...
* 1111 = 15 bus clocks
* [26:24] Trp (Row Precharge Time)
* 000 = reserved
* 001 = reserved
* 010 = 2 bus clocks
* 011 = 3 bus clocks
* 100 = 4 bus clocks
* 101 = 5 bus clocks
* 110 = 6 bus clocks
* 111 = reserved
* [27:27] Reserved
* [28:28] Twr (Write Recovery Time)
* 0 = 2 bus clocks
* 1 = 3 bus clocks
* [31:29] Reserved
*/
PCI_ADDR(0, 0x18, 2, 0x88), 0xe8088008, 0x02522001 /* 0x03623125 */ ,
/* DRAM Timing High Register
* F2:0x8C
* [ 0: 0] Twtr (Write to Read Delay)
* 0 = 1 bus Clocks
* 1 = 2 bus Clocks
* [ 3: 1] Reserved
* [ 6: 4] Trwt (Read to Write Delay)
* 000 = 1 bus clocks
* 001 = 2 bus clocks
* 010 = 3 bus clocks
* 011 = 4 bus clocks
* 100 = 5 bus clocks
* 101 = 6 bus clocks
* 110 = reserved
* 111 = reserved
* [ 7: 7] Reserved
* [12: 8] Tref (Refresh Rate)
* 00000 = 100Mhz 4K rows
* 00001 = 133Mhz 4K rows
* 00010 = 166Mhz 4K rows
* 00011 = 200Mhz 4K rows
* 01000 = 100Mhz 8K/16K rows
* 01001 = 133Mhz 8K/16K rows
* 01010 = 166Mhz 8K/16K rows
* 01011 = 200Mhz 8K/16K rows
* [19:13] Reserved
* [22:20] Twcl (Write CAS Latency)
* 000 = 1 Mem clock after CAS# (Unbuffered Dimms)
* 001 = 2 Mem clocks after CAS# (Registered Dimms)
* [31:23] Reserved
*/
PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, (0 << 20)|(0 << 8)|(0 << 4)|(0 << 0),
/* DRAM Config Low Register
* F2:0x90
* [ 0: 0] DLL Disable
* 0 = Enabled
* 1 = Disabled
* [ 1: 1] D_DRV
* 0 = Normal Drive
* 1 = Weak Drive
* [ 2: 2] QFC_EN
* 0 = Disabled
* 1 = Enabled
* [ 3: 3] Disable DQS Hystersis (FIXME handle this one carefully)
* 0 = Enable DQS input filter
* 1 = Disable DQS input filtering
* [ 7: 4] Reserved
* [ 8: 8] DRAM_Init
* 0 = Initialization done or not yet started.
* 1 = Initiate DRAM intialization sequence
* [ 9: 9] SO-Dimm Enable
* 0 = Do nothing
* 1 = SO-Dimms present
* [10:10] DramEnable
* 0 = DRAM not enabled
* 1 = DRAM initialized and enabled
* [11:11] Memory Clear Status
* 0 = Memory Clear function has not completed
* 1 = Memory Clear function has completed
* [12:12] Exit Self-Refresh
* 0 = Exit from self-refresh done or not yet started
* 1 = DRAM exiting from self refresh
* [13:13] Self-Refresh Status
* 0 = Normal Operation
* 1 = Self-refresh mode active
* [15:14] Read/Write Queue Bypass Count
* 00 = 2
* 01 = 4
* 10 = 8
* 11 = 16
* [16:16] 128-bit/64-Bit
* 0 = 64bit Interface to DRAM
* 1 = 128bit Interface to DRAM
* [17:17] DIMM ECC Enable
* 0 = Some DIMMs do not have ECC
* 1 = ALL DIMMS have ECC bits
* [18:18] UnBuffered DIMMs
* 0 = Buffered DIMMS
* 1 = Unbuffered DIMMS
* [19:19] Enable 32-Byte Granularity
* 0 = Optimize for 64byte bursts
* 1 = Optimize for 32byte bursts
* [20:20] DIMM 0 is x4
* [21:21] DIMM 1 is x4
* [22:22] DIMM 2 is x4
* [23:23] DIMM 3 is x4
* 0 = DIMM is not x4
* 1 = x4 DIMM present
* [24:24] Disable DRAM Receivers
* 0 = Receivers enabled
* 1 = Receivers disabled
* [27:25] Bypass Max
* 000 = Arbiters chois is always respected
* 001 = Oldest entry in DCQ can be bypassed 1 time
* 010 = Oldest entry in DCQ can be bypassed 2 times
* 011 = Oldest entry in DCQ can be bypassed 3 times
* 100 = Oldest entry in DCQ can be bypassed 4 times
* 101 = Oldest entry in DCQ can be bypassed 5 times
* 110 = Oldest entry in DCQ can be bypassed 6 times
* 111 = Oldest entry in DCQ can be bypassed 7 times
* [31:28] Reserved
*/
PCI_ADDR(0, 0x18, 2, 0x90), 0xf0000000,
(4 << 25)|(0 << 24)|
(0 << 23)|(0 << 22)|(0 << 21)|(0 << 20)|
(1 << 19)|(0 << 18)|(1 << 17)|(0 << 16)|
(2 << 14)|(0 << 13)|(0 << 12)|
(0 << 11)|(0 << 10)|(0 << 9)|(0 << 8)|
(0 << 3) |(0 << 1) |(0 << 0),
/* DRAM Config High Register
* F2:0x94
* [ 0: 3] Maximum Asynchronous Latency
* 0000 = 0 ns
* ...
* 1111 = 15 ns
* [ 7: 4] Reserved
* [11: 8] Read Preamble
* 0000 = 2.0 ns
* 0001 = 2.5 ns
* 0010 = 3.0 ns
* 0011 = 3.5 ns
* 0100 = 4.0 ns
* 0101 = 4.5 ns
* 0110 = 5.0 ns
* 0111 = 5.5 ns
* 1000 = 6.0 ns
* 1001 = 6.5 ns
* 1010 = 7.0 ns
* 1011 = 7.5 ns
* 1100 = 8.0 ns
* 1101 = 8.5 ns
* 1110 = 9.0 ns
* 1111 = 9.5 ns
* [15:12] Reserved
* [18:16] Idle Cycle Limit
* 000 = 0 cycles
* 001 = 4 cycles
* 010 = 8 cycles
* 011 = 16 cycles
* 100 = 32 cycles
* 101 = 64 cycles
* 110 = 128 cycles
* 111 = 256 cycles
* [19:19] Dynamic Idle Cycle Center Enable
* 0 = Use Idle Cycle Limit
* 1 = Generate a dynamic Idle cycle limit
* [22:20] DRAM MEMCLK Frequency
* 000 = 100Mhz
* 001 = reserved
* 010 = 133Mhz
* 011 = reserved
* 100 = reserved
* 101 = 166Mhz
* 110 = reserved
* 111 = reserved
* [24:23] Reserved
* [25:25] Memory Clock Ratio Valid (FIXME carefully enable memclk)
* 0 = Disable MemClks
* 1 = Enable MemClks
* [26:26] Memory Clock 0 Enable
* 0 = Disabled
* 1 = Enabled
* [27:27] Memory Clock 1 Enable
* 0 = Disabled
* 1 = Enabled
* [28:28] Memory Clock 2 Enable
* 0 = Disabled
* 1 = Enabled
* [29:29] Memory Clock 3 Enable
* 0 = Disabled
* 1 = Enabled
* [31:30] Reserved
*/
PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0,
(0 << 29)|(0 << 28)|(0 << 27)|(0 << 26)|(0 << 25)|
(0 << 20)|(0 << 19)|(DCH_IDLE_LIMIT_16 << 16)|(0 << 8)|(0 << 0),
/* DRAM Delay Line Register
* F2:0x98
* Adjust the skew of the input DQS strobe relative to DATA
* [15: 0] Reserved
* [23:16] Delay Line Adjust
* Adjusts the DLL derived PDL delay by one or more delay stages
* in either the faster or slower direction.
* [24:24} Adjust Slower
* 0 = Do Nothing
* 1 = Adj is used to increase the PDL delay
* [25:25] Adjust Faster
* 0 = Do Nothing
* 1 = Adj is used to decrease the PDL delay
* [31:26] Reserved
*/
PCI_ADDR(0, 0x18, 2, 0x98), 0xfc00ffff, 0x00000000,
/* DRAM Scrub Control Register
* F3:0x58
* [ 4: 0] DRAM Scrube Rate
* [ 7: 5] reserved
* [12: 8] L2 Scrub Rate
* [15:13] reserved
* [20:16] Dcache Scrub
* [31:21] reserved
* Scrub Rates
* 00000 = Do not scrub
* 00001 = 40.00 ns
* 00010 = 80.00 ns
* 00011 = 160.00 ns
* 00100 = 320.00 ns
* 00101 = 640.00 ns
* 00110 = 1.28 us
* 00111 = 2.56 us
* 01000 = 5.12 us
* 01001 = 10.20 us
* 01011 = 41.00 us
* 01100 = 81.90 us
* 01101 = 163.80 us
* 01110 = 327.70 us
* 01111 = 655.40 us
* 10000 = 1.31 ms
* 10001 = 2.62 ms
* 10010 = 5.24 ms
* 10011 = 10.49 ms
* 10100 = 20.97 ms
* 10101 = 42.00 ms
* 10110 = 84.00 ms
* All Others = Reserved
*/
PCI_ADDR(0, 0x18, 3, 0x58), 0xffe0e0e0, 0x00000000,
/* DRAM Scrub Address Low Register
* F3:0x5C
* [ 0: 0] DRAM Scrubber Redirect Enable
* 0 = Do nothing
* 1 = Scrubber Corrects errors found in normal operation
* [ 5: 1] Reserved
* [31: 6] DRAM Scrub Address 31-6
*/
PCI_ADDR(0, 0x18, 3, 0x5C), 0x0000003e, 0x00000000,
/* DRAM Scrub Address High Register
* F3:0x60
* [ 7: 0] DRAM Scrubb Address 39-32
* [31: 8] Reserved
*/
PCI_ADDR(0, 0x18, 3, 0x60), 0xffffff00, 0x00000000,
};
int i;
int max;
print_debug("setting up CPU");
print_debug_hex8(ctrl->node_id);
print_debug(" northbridge registers\r\n");
max = sizeof(register_values)/sizeof(register_values[0]);
for(i = 0; i < max; i += 3) {
device_t dev;
unsigned where;
unsigned long reg;
#if 0
print_debug_hex32(register_values[i]);
print_debug(" <-");
print_debug_hex32(register_values[i+2]);
print_debug("\r\n");
#endif
dev = (register_values[i] & ~0xff) - PCI_DEV(0, 0x18, 0) + ctrl->f0;
where = register_values[i] & 0xff;
reg = pci_read_config32(dev, where);
reg &= register_values[i+1];
reg |= register_values[i+2];
pci_write_config32(dev, where, reg);
#if 0
reg = pci_read_config32(register_values[i]);
reg &= register_values[i+1];
reg |= register_values[i+2];
pci_write_config32(register_values[i], reg);
#endif
}
print_debug("done.\r\n");
}
static int is_dual_channel(const struct mem_controller *ctrl)
{
uint32_t dcl;
dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
return dcl & DCL_128BitEn;
}
static int is_opteron(const struct mem_controller *ctrl)
{
/* Test to see if I am an Opteron.
* FIXME Testing dual channel capability is correct for now
* but a beter test is probably required.
*/
uint32_t nbcap;
nbcap = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP);
return !!(nbcap & NBCAP_128Bit);
}
static int is_registered(const struct mem_controller *ctrl)
{
/* Test to see if we are dealing with registered SDRAM.
* If we are not registered we are unbuffered.
* This function must be called after spd_handle_unbuffered_dimms.
*/
uint32_t dcl;
dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
return !(dcl & DCL_UnBufDimm);
}
struct dimm_size {
unsigned long side1;
unsigned long side2;
};
static struct dimm_size spd_get_dimm_size(unsigned device)
{
/* Calculate the log base 2 size of a DIMM in bits */
struct dimm_size sz;
int value, low;
sz.side1 = 0;
sz.side2 = 0;
/* Note it might be easier to use byte 31 here, it has the DIMM size as
* a multiple of 4MB. The way we do it now we can size both
* sides of an assymetric dimm.
*/
value = spd_read_byte(device, 3); /* rows */
if (value < 0) goto out;
sz.side1 += value & 0xf;
value = spd_read_byte(device, 4); /* columns */
if (value < 0) goto out;
sz.side1 += value & 0xf;
value = spd_read_byte(device, 17); /* banks */
if (value < 0) goto out;
sz.side1 += log2(value & 0xff);
/* Get the module data width and convert it to a power of two */
value = spd_read_byte(device, 7); /* (high byte) */
if (value < 0) goto out;
value &= 0xff;
value <<= 8;
low = spd_read_byte(device, 6); /* (low byte) */
if (low < 0) goto out;
value = value | (low & 0xff);
sz.side1 += log2(value);
/* side 2 */
value = spd_read_byte(device, 5); /* number of physical banks */
if (value <= 1) goto out;
/* Start with the symmetrical case */
sz.side2 = sz.side1;
value = spd_read_byte(device, 3); /* rows */
if (value < 0) goto out;
if ((value & 0xf0) == 0) goto out; /* If symmetrical we are done */
sz.side2 -= (value & 0x0f); /* Subtract out rows on side 1 */
sz.side2 += ((value >> 4) & 0x0f); /* Add in rows on side 2 */
value = spd_read_byte(device, 4); /* columns */
if (value < 0) goto out;
sz.side2 -= (value & 0x0f); /* Subtract out columns on side 1 */
sz.side2 += ((value >> 4) & 0x0f); /* Add in columsn on side 2 */
out:
return sz;
}
static void set_dimm_size(const struct mem_controller *ctrl, struct dimm_size sz, unsigned index)
{
uint32_t base0, base1, map;
uint32_t dch;
#if 0
print_debug("set_dimm_size: (");
print_debug_hex32(sz.side1);
print_debug_char(',');
print_debug_hex32(sz.side2);
print_debug_char(',');
print_debug_hex32(index);
print_debug(")\r\n");
#endif
if (sz.side1 != sz.side2) {
sz.side2 = 0;
}
map = pci_read_config32(ctrl->f2, DRAM_BANK_ADDR_MAP);
map &= ~(0xf << (index + 4));
/* For each base register.
* Place the dimm size in 32 MB quantities in the bits 31 - 21.
* The initialize dimm size is in bits.
* Set the base enable bit0.
*/
base0 = base1 = 0;
/* Make certain side1 of the dimm is at least 32MB */
if (sz.side1 >= (25 +3)) {
map |= (sz.side1 - (25 + 3)) << (index *4);
base0 = (1 << ((sz.side1 - (25 + 3)) + 21)) | 1;
}
/* Make certain side2 of the dimm is at least 32MB */
if (sz.side2 >= (25 + 3)) {
base1 = (1 << ((sz.side2 - (25 + 3)) + 21)) | 1;
}
/* Double the size if we are using dual channel memory */
if (is_dual_channel(ctrl)) {
base0 = (base0 << 1) | (base0 & 1);
base1 = (base1 << 1) | (base1 & 1);
}
/* Clear the reserved bits */
base0 &= ~0x001ffffe;
base1 &= ~0x001ffffe;
/* Set the appropriate DIMM base address register */
pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+0)<<2), base0);
pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+1)<<2), base1);
pci_write_config32(ctrl->f2, DRAM_BANK_ADDR_MAP, map);
/* Enable the memory clocks for this DIMM */
if (base0) {
dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH);
dch |= DCH_MEMCLK_EN0 << index;
pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch);
}
}
static void spd_set_ram_size(const struct mem_controller *ctrl)
{
int i;
for(i = 0; (i < 4) && (ctrl->channel0[i]); i++) {
struct dimm_size sz;
sz = spd_get_dimm_size(ctrl->channel0[i]);
set_dimm_size(ctrl, sz, i);
}
}
static void route_dram_accesses(const struct mem_controller *ctrl,
unsigned long base_k, unsigned long limit_k)
{
/* Route the addresses to the controller node */
unsigned node_id;
unsigned limit;
unsigned base;
unsigned index;
unsigned limit_reg, base_reg;
device_t device;
node_id = ctrl->node_id;
index = (node_id << 3);
limit = (limit_k << 2);
limit &= 0xffff0000;
limit -= 0x00010000;
limit |= ( 0 << 8) | (node_id << 0);
base = (base_k << 2);
base &= 0xffff0000;
base |= (0 << 8) | (1<<1) | (1<<0);
limit_reg = 0x44 + index;
base_reg = 0x40 + index;
for(device = PCI_DEV(0, 0x18, 1); device <= PCI_DEV(0, 0x1f, 1); device += PCI_DEV(0, 1, 0)) {
pci_write_config32(device, limit_reg, limit);
pci_write_config32(device, base_reg, base);
}
}
static void set_top_mem(unsigned tom_k)
{
/* Error if I don't have memory */
if (!tom_k) {
die("No memory");
}
#if 1
/* Report the amount of memory. */
print_debug("RAM: 0x");
print_debug_hex32(tom_k);
print_debug(" KB\r\n");
#endif
/* Now set top of memory */
msr_t msr;
msr.lo = (tom_k & 0x003fffff) << 10;
msr.hi = (tom_k & 0xffc00000) >> 22;
wrmsr(TOP_MEM2, msr);
/* Leave a 64M hole between TOP_MEM and TOP_MEM2
* so I can see my rom chip and other I/O devices.
*/
if (tom_k >= 0x003f0000) {
tom_k = 0x3f0000;
}
msr.lo = (tom_k & 0x003fffff) << 10;
msr.hi = (tom_k & 0xffc00000) >> 22;
wrmsr(TOP_MEM, msr);
}
static void order_dimms(const struct mem_controller *ctrl)
{
unsigned long tom, tom_k, base_k;
unsigned node_id;
/* Compute the memory base address address */
base_k = 0;
for(node_id = 0; node_id < ctrl->node_id; node_id++) {
uint32_t limit, base;
unsigned index;
index = node_id << 3;
base = pci_read_config32(ctrl->f1, 0x40 + index);
/* Only look at the limit if the base is enabled */
if ((base & 3) == 3) {
limit = pci_read_config32(ctrl->f1, 0x44 + index);
base_k = ((limit + 0x00010000) & 0xffff0000) >> 2;
}
}
/* Remember which registers we have used in the high 8 bits of tom */
tom = base_k >> 15;
for(;;) {
/* Find the largest remaining canidate */
unsigned index, canidate;
uint32_t csbase, csmask;
unsigned size;
csbase = 0;
canidate = 0;
for(index = 0; index < 8; index++) {
uint32_t value;
value = pci_read_config32(ctrl->f2, DRAM_CSBASE + (index << 2));
/* Is it enabled? */
if (!(value & 1)) {
continue;
}
/* Is it greater? */
if (value <= csbase) {
continue;
}
/* Has it already been selected */
if (tom & (1 << (index + 24))) {
continue;
}
/* I have a new canidate */
csbase = value;
canidate = index;
}
/* See if I have found a new canidate */
if (csbase == 0) {
break;
}
/* Remember the dimm size */
size = csbase >> 21;
/* If this is the first chip select, round base_k to
* be a multiple of it's size. Then set tom to equal
* base_k.
* I assume that size is a power of two.
*/
if ((tom & 0xff000000) == 0) {
unsigned size_k;
size_k = size << 15;
base_k = (base_k + size_k -1) & ~(size_k -1);
tom = base_k >> 15;
}
/* Remember I have used this register */
tom |= (1 << (canidate + 24));
/* Recompute the cs base register value */
#if 1 // BY LYH Need to count from 0 for every memory controller
csbase = ((tom - (base_k>>15))<< 21) | 1;
print_debug("csbase=");
print_debug_hex32(csbase);
print_debug("\r\n");
#else //BY LYH END
csbase = (tom << 21) | 1;
#endif
/* Increment the top of memory */
tom += size;
/* Compute the memory mask */
csmask = ((size -1) << 21);
csmask |= 0xfe00; /* For now don't optimize */
#warning "Don't forget to optimize the DIMM size"
/* Write the new base register */
pci_write_config32(ctrl->f2, DRAM_CSBASE + (canidate << 2), csbase);
/* Write the new mask register */
pci_write_config32(ctrl->f2, DRAM_CSMASK + (canidate << 2), csmask);
}
tom_k = (tom & ~0xff000000) << 15;
#if 0
print_debug("tom: ");
print_debug_hex32(tom);
print_debug(" base_k: ");
print_debug_hex32(base_k);
print_debug(" tom_k: ");
print_debug_hex32(tom_k);
print_debug("\r\n");
#endif
route_dram_accesses(ctrl, base_k, tom_k);
#if 0 //BY LYH
if(ctrl->node_id==1) {
pci_write_config32(ctrl->f2, DRAM_CSBASE, 0x00000001);
}
#endif
set_top_mem(tom_k);
}
static void disable_dimm(const struct mem_controller *ctrl, unsigned index)
{
print_debug("disabling dimm");
print_debug_hex8(index);
print_debug("\r\n");
pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+0)<<2), 0);
pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+1)<<2), 0);
}
static void spd_handle_unbuffered_dimms(const struct mem_controller *ctrl)
{
int i;
int registered;
int unbuffered;
uint32_t dcl;
unbuffered = 0;
registered = 0;
for(i = 0; (i < 4) && (ctrl->channel0[i]); i++) {
int value;
value = spd_read_byte(ctrl->channel0[i], 21);
if (value < 0) {
disable_dimm(ctrl, i);
continue;
}
/* Registered dimm ? */
if (value & (1 << 1)) {
registered = 1;
}
/* Otherwise it must be an unbuffered dimm */
else {
unbuffered = 1;
}
}
if (unbuffered && registered) {
die("Mixed buffered and registered dimms not supported");
}
if (unbuffered && is_opteron(ctrl)) {
die("Unbuffered Dimms not supported on Opteron");
}
dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
dcl &= ~DCL_UnBufDimm;
if (unbuffered) {
dcl |= DCL_UnBufDimm;
}
pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl);
#if 0
if (is_registered(ctrl)) {
print_debug("Registered\r\n");
} else {
print_debug("Unbuffered\r\n");
}
#endif
}
static void spd_enable_2channels(const struct mem_controller *ctrl)
{
int i;
uint32_t nbcap;
/* SPD addresses to verify are identical */
#warning "FINISHME review and see if these are the bytes I need"
/* FINISHME review and see if these are the bytes I need */
static const unsigned addresses[] = {
2, /* Type should be DDR SDRAM */
3, /* *Row addresses */
4, /* *Column addresses */
5, /* *Physical Banks */
6, /* *Module Data Width low */
7, /* *Module Data Width high */
9, /* *Cycle time at highest CAS Latency CL=X */
11, /* *SDRAM Type */
13, /* *SDRAM Width */
17, /* *Logical Banks */
18, /* *Supported CAS Latencies */
21, /* *SDRAM Module Attributes */
23, /* *Cycle time at CAS Latnecy (CLX - 0.5) */
26, /* *Cycle time at CAS Latnecy (CLX - 1.0) */
27, /* *tRP Row precharge time */
28, /* *Minimum Row Active to Row Active Delay (tRRD) */
29, /* *tRCD RAS to CAS */
30, /* *tRAS Activate to Precharge */
41, /* *Minimum Active to Active/Auto Refresh Time(Trc) */
42, /* *Minimum Auto Refresh Command Time(Trfc) */
};
nbcap = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP);
if (!(nbcap & NBCAP_128Bit)) {
return;
}
for(i = 0; (i < 4) && (ctrl->channel0[i]); i++) {
unsigned device0, device1;
int value0, value1;
int j;
device0 = ctrl->channel0[i];
device1 = ctrl->channel1[i];
if (!device1)
return;
for(j = 0; j < sizeof(addresses)/sizeof(addresses[0]); j++) {
unsigned addr;
addr = addresses[j];
value0 = spd_read_byte(device0, addr);
if (value0 < 0) {
break;
}
value1 = spd_read_byte(device1, addr);
if (value1 < 0) {
return;
}
if (value0 != value1) {
return;
}
}
}
print_debug("Enabling dual channel memory\r\n");
uint32_t dcl;
dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
dcl &= ~DCL_32ByteEn;
dcl |= DCL_128BitEn;
pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl);
}
struct mem_param {
uint8_t cycle_time;
uint8_t divisor; /* In 1/2 ns increments */
uint8_t tRC;
uint8_t tRFC;
uint32_t dch_memclk;
uint16_t dch_tref4k, dch_tref8k;
uint8_t dtl_twr;
char name[9];
};
static const struct mem_param *get_mem_param(unsigned min_cycle_time)
{
static const struct mem_param speed[] = {
{
.name = "100Mhz\r\n",
.cycle_time = 0xa0,
.divisor = (10 <<1),
.tRC = 0x46,
.tRFC = 0x50,
.dch_memclk = DCH_MEMCLK_100MHZ << DCH_MEMCLK_SHIFT,
.dch_tref4k = DTH_TREF_100MHZ_4K,
.dch_tref8k = DTH_TREF_100MHZ_8K,
.dtl_twr = 2,
},
{
.name = "133Mhz\r\n",
.cycle_time = 0x75,
.divisor = (7<<1)+1,
.tRC = 0x41,
.tRFC = 0x4B,
.dch_memclk = DCH_MEMCLK_133MHZ << DCH_MEMCLK_SHIFT,
.dch_tref4k = DTH_TREF_133MHZ_4K,
.dch_tref8k = DTH_TREF_133MHZ_8K,
.dtl_twr = 2,
},
{
.name = "166Mhz\r\n",
.cycle_time = 0x60,
.divisor = (6<<1),
.tRC = 0x3C,
.tRFC = 0x48,
.dch_memclk = DCH_MEMCLK_166MHZ << DCH_MEMCLK_SHIFT,
.dch_tref4k = DTH_TREF_166MHZ_4K,
.dch_tref8k = DTH_TREF_166MHZ_8K,
.dtl_twr = 3,
},
{
.name = "200Mhz\r\n",
.cycle_time = 0x50,
.divisor = (5<<1),
.tRC = 0x37,
.tRFC = 0x46,
.dch_memclk = DCH_MEMCLK_200MHZ << DCH_MEMCLK_SHIFT,
.dch_tref4k = DTH_TREF_200MHZ_4K,
.dch_tref8k = DTH_TREF_200MHZ_8K,
.dtl_twr = 3,
},
{
.cycle_time = 0x00,
},
};
const struct mem_param *param;
for(param = &speed[0]; param->cycle_time ; param++) {
if (min_cycle_time > (param+1)->cycle_time) {
break;
}
}
if (!param->cycle_time) {
die("min_cycle_time to low");
}
#if 1
print_debug(param->name);
#endif
return param;
}
static const struct mem_param *spd_set_memclk(const struct mem_controller *ctrl)
{
/* Compute the minimum cycle time for these dimms */
const struct mem_param *param;
unsigned min_cycle_time, min_latency;
int i;
uint32_t value;
static const int latency_indicies[] = { 26, 23, 9 };
static const unsigned char min_cycle_times[] = {
[NBCAP_MEMCLK_200MHZ] = 0x50, /* 5ns */
[NBCAP_MEMCLK_166MHZ] = 0x60, /* 6ns */
[NBCAP_MEMCLK_133MHZ] = 0x75, /* 7.5ns */
[NBCAP_MEMCLK_100MHZ] = 0xa0, /* 10ns */
};
value = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP);
min_cycle_time = min_cycle_times[(value >> NBCAP_MEMCLK_SHIFT) & NBCAP_MEMCLK_MASK];
min_latency = 2;
#if 0
print_debug("min_cycle_time: ");
print_debug_hex8(min_cycle_time);
print_debug(" min_latency: ");
print_debug_hex8(min_latency);
print_debug("\r\n");
#endif
/* Compute the least latency with the fastest clock supported
* by both the memory controller and the dimms.
*/
for(i = 0; (i < 4) && (ctrl->channel0[i]); i++) {
int new_cycle_time, new_latency;
int index;
int latencies;
int latency;
/* First find the supported CAS latencies
* Byte 18 for DDR SDRAM is interpreted:
* bit 0 == CAS Latency = 1.0
* bit 1 == CAS Latency = 1.5
* bit 2 == CAS Latency = 2.0
* bit 3 == CAS Latency = 2.5
* bit 4 == CAS Latency = 3.0
* bit 5 == CAS Latency = 3.5
* bit 6 == TBD
* bit 7 == TBD
*/
new_cycle_time = 0xa0;
new_latency = 5;
latencies = spd_read_byte(ctrl->channel0[i], 18);
if (latencies <= 0) continue;
/* Compute the lowest cas latency supported */
latency = log2(latencies) -2;
/* Loop through and find a fast clock with a low latency */
for(index = 0; index < 3; index++, latency++) {
int value;
if ((latency < 2) || (latency > 4) ||
(!(latencies & (1 << latency)))) {
continue;
}
value = spd_read_byte(ctrl->channel0[i], latency_indicies[index]);
if (value < 0) {
continue;
}
/* Only increase the latency if we decreas the clock */
if ((value >= min_cycle_time) && (value < new_cycle_time)) {
new_cycle_time = value;
new_latency = latency;
}
}
if (new_latency > 4){
continue;
}
/* Does min_latency need to be increased? */
if (new_cycle_time > min_cycle_time) {
min_cycle_time = new_cycle_time;
}
/* Does min_cycle_time need to be increased? */
if (new_latency > min_latency) {
min_latency = new_latency;
}
#if 0
print_debug("i: ");
print_debug_hex8(i);
print_debug(" min_cycle_time: ");
print_debug_hex8(min_cycle_time);
print_debug(" min_latency: ");
print_debug_hex8(min_latency);
print_debug("\r\n");
#endif
}
/* Make a second pass through the dimms and disable
* any that cannot support the selected memclk and cas latency.
*/
for(i = 0; (i < 4) && (ctrl->channel0[i]); i++) {
int latencies;
int latency;
int index;
int value;
int dimm;
latencies = spd_read_byte(ctrl->channel0[i], 18);
if (latencies <= 0) {
goto dimm_err;
}
/* Compute the lowest cas latency supported */
latency = log2(latencies) -2;
/* Walk through searching for the selected latency */
for(index = 0; index < 3; index++, latency++) {
if (!(latencies & (1 << latency))) {
continue;
}
if (latency == min_latency)
break;
}
/* If I can't find the latency or my index is bad error */
if ((latency != min_latency) || (index >= 3)) {
goto dimm_err;
}
/* Read the min_cycle_time for this latency */
value = spd_read_byte(ctrl->channel0[i], latency_indicies[index]);
/* All is good if the selected clock speed
* is what I need or slower.
*/
if (value <= min_cycle_time) {
continue;
}
/* Otherwise I have an error, disable the dimm */
dimm_err:
disable_dimm(ctrl, i);
}
#if 0
print_debug("min_cycle_time: ");
print_debug_hex8(min_cycle_time);
print_debug(" min_latency: ");
print_debug_hex8(min_latency);
print_debug("\r\n");
#endif
/* Now that I know the minimum cycle time lookup the memory parameters */
param = get_mem_param(min_cycle_time);
/* Update DRAM Config High with our selected memory speed */
value = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH);
value &= ~(DCH_MEMCLK_MASK << DCH_MEMCLK_SHIFT);
value |= param->dch_memclk;
pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, value);
static const unsigned latencies[] = { DTL_CL_2, DTL_CL_2_5, DTL_CL_3 };
/* Update DRAM Timing Low with our selected cas latency */
value = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
value &= ~(DTL_TCL_MASK << DTL_TCL_SHIFT);
value |= latencies[min_latency - 2] << DTL_TCL_SHIFT;
pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, value);
return param;
}
static int update_dimm_Trc(const struct mem_controller *ctrl, const struct mem_param *param, int i)
{
unsigned clocks, old_clocks;
uint32_t dtl;
int value;
value = spd_read_byte(ctrl->channel0[i], 41);
if (value < 0) return -1;
if ((value == 0) || (value == 0xff)) {
value = param->tRC;
}
clocks = ((value << 1) + param->divisor - 1)/param->divisor;
if (clocks < DTL_TRC_MIN) {
clocks = DTL_TRC_MIN;
}
if (clocks > DTL_TRC_MAX) {
return -1;
}
dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
old_clocks = ((dtl >> DTL_TRC_SHIFT) & DTL_TRC_MASK) + DTL_TRC_BASE;
if (old_clocks > clocks) {
clocks = old_clocks;
}
dtl &= ~(DTL_TRC_MASK << DTL_TRC_SHIFT);
dtl |= ((clocks - DTL_TRC_BASE) << DTL_TRC_SHIFT);
pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl);
return 0;
}
static int update_dimm_Trfc(const struct mem_controller *ctrl, const struct mem_param *param, int i)
{
unsigned clocks, old_clocks;
uint32_t dtl;
int value;
value = spd_read_byte(ctrl->channel0[i], 42);
if (value < 0) return -1;
if ((value == 0) || (value == 0xff)) {
value = param->tRFC;
}
clocks = ((value << 1) + param->divisor - 1)/param->divisor;
if (clocks < DTL_TRFC_MIN) {
clocks = DTL_TRFC_MIN;
}
if (clocks > DTL_TRFC_MAX) {
return -1;
}
dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
old_clocks = ((dtl >> DTL_TRFC_SHIFT) & DTL_TRFC_MASK) + DTL_TRFC_BASE;
if (old_clocks > clocks) {
clocks = old_clocks;
}
dtl &= ~(DTL_TRFC_MASK << DTL_TRFC_SHIFT);
dtl |= ((clocks - DTL_TRFC_BASE) << DTL_TRFC_SHIFT);
pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl);
return 0;
}
static int update_dimm_Trcd(const struct mem_controller *ctrl, const struct mem_param *param, int i)
{
unsigned clocks, old_clocks;
uint32_t dtl;
int value;
value = spd_read_byte(ctrl->channel0[i], 29);
if (value < 0) return -1;
#if 0
clocks = (value + (param->divisor << 1) -1)/(param->divisor << 1);
#else
clocks = (value + ((param->divisor & 0xff) << 1) -1)/((param->divisor & 0xff) << 1);
#endif
if (clocks < DTL_TRCD_MIN) {
clocks = DTL_TRCD_MIN;
}
if (clocks > DTL_TRCD_MAX) {
return -1;
}
dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
old_clocks = ((dtl >> DTL_TRCD_SHIFT) & DTL_TRCD_MASK) + DTL_TRCD_BASE;
if (old_clocks > clocks) {
clocks = old_clocks;
}
dtl &= ~(DTL_TRCD_MASK << DTL_TRCD_SHIFT);
dtl |= ((clocks - DTL_TRCD_BASE) << DTL_TRCD_SHIFT);
pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl);
return 0;
}
static int update_dimm_Trrd(const struct mem_controller *ctrl, const struct mem_param *param, int i)
{
unsigned clocks, old_clocks;
uint32_t dtl;
int value;
value = spd_read_byte(ctrl->channel0[i], 28);
if (value < 0) return -1;
clocks = (value + ((param->divisor & 0xff) << 1) -1)/((param->divisor & 0xff) << 1);
if (clocks < DTL_TRRD_MIN) {
clocks = DTL_TRRD_MIN;
}
if (clocks > DTL_TRRD_MAX) {
return -1;
}
dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
old_clocks = ((dtl >> DTL_TRRD_SHIFT) & DTL_TRRD_MASK) + DTL_TRRD_BASE;
if (old_clocks > clocks) {
clocks = old_clocks;
}
dtl &= ~(DTL_TRRD_MASK << DTL_TRRD_SHIFT);
dtl |= ((clocks - DTL_TRRD_BASE) << DTL_TRRD_SHIFT);
pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl);
return 0;
}
static int update_dimm_Tras(const struct mem_controller *ctrl, const struct mem_param *param, int i)
{
unsigned clocks, old_clocks;
uint32_t dtl;
int value;
value = spd_read_byte(ctrl->channel0[i], 30);
if (value < 0) return -1;
clocks = ((value << 1) + param->divisor - 1)/param->divisor;
if (clocks < DTL_TRAS_MIN) {
clocks = DTL_TRAS_MIN;
}
if (clocks > DTL_TRAS_MAX) {
return -1;
}
dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
old_clocks = ((dtl >> DTL_TRAS_SHIFT) & DTL_TRAS_MASK) + DTL_TRAS_BASE;
if (old_clocks > clocks) {
clocks = old_clocks;
}
dtl &= ~(DTL_TRAS_MASK << DTL_TRAS_SHIFT);
dtl |= ((clocks - DTL_TRAS_BASE) << DTL_TRAS_SHIFT);
pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl);
return 0;
}
static int update_dimm_Trp(const struct mem_controller *ctrl, const struct mem_param *param, int i)
{
unsigned clocks, old_clocks;
uint32_t dtl;
int value;
value = spd_read_byte(ctrl->channel0[i], 27);
if (value < 0) return -1;
#if 0
clocks = (value + (param->divisor << 1) - 1)/(param->divisor << 1);
#else
clocks = (value + ((param->divisor & 0xff) << 1) - 1)/((param->divisor & 0xff) << 1);
#endif
#if 0
print_debug("Trp: ");
print_debug_hex8(clocks);
print_debug(" spd value: ");
print_debug_hex8(value);
print_debug(" divisor: ");
print_debug_hex8(param->divisor);
print_debug("\r\n");
#endif
if (clocks < DTL_TRP_MIN) {
clocks = DTL_TRP_MIN;
}
if (clocks > DTL_TRP_MAX) {
return -1;
}
dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
old_clocks = ((dtl >> DTL_TRP_SHIFT) & DTL_TRP_MASK) + DTL_TRP_BASE;
if (old_clocks > clocks) {
clocks = old_clocks;
}
dtl &= ~(DTL_TRP_MASK << DTL_TRP_SHIFT);
dtl |= ((clocks - DTL_TRP_BASE) << DTL_TRP_SHIFT);
pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl);
return 0;
}
static void set_Twr(const struct mem_controller *ctrl, const struct mem_param *param)
{
uint32_t dtl;
dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
dtl &= ~(DTL_TWR_MASK << DTL_TWR_SHIFT);
dtl |= (param->dtl_twr - DTL_TWR_BASE) << DTL_TWR_SHIFT;
pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl);
}
static void init_Tref(const struct mem_controller *ctrl, const struct mem_param *param)
{
uint32_t dth;
dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH);
dth &= ~(DTH_TREF_MASK << DTH_TREF_SHIFT);
dth |= (param->dch_tref4k << DTH_TREF_SHIFT);
pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth);
}
static int update_dimm_Tref(const struct mem_controller *ctrl, const struct mem_param *param, int i)
{
uint32_t dth;
int value;
unsigned tref, old_tref;
value = spd_read_byte(ctrl->channel0[i], 3);
if (value < 0) return -1;
value &= 0xf;
tref = param->dch_tref8k;
if (value == 12) {
tref = param->dch_tref4k;
}
dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH);
old_tref = (dth >> DTH_TREF_SHIFT) & DTH_TREF_MASK;
if ((value == 12) && (old_tref == param->dch_tref4k)) {
tref = param->dch_tref4k;
} else {
tref = param->dch_tref8k;
}
dth &= ~(DTH_TREF_MASK << DTH_TREF_SHIFT);
dth |= (tref << DTH_TREF_SHIFT);
pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth);
return 0;
}
static int update_dimm_x4(const struct mem_controller *ctrl, const struct mem_param *param, int i)
{
uint32_t dcl;
int value;
int dimm;
value = spd_read_byte(ctrl->channel0[i], 13);
if (value < 0) {
return -1;
}
dimm = i;
dimm += DCL_x4DIMM_SHIFT;
dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
dcl &= ~(1 << dimm);
if (value == 4) {
dcl |= (1 << dimm);
}
pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl);
return 0;
}
static int update_dimm_ecc(const struct mem_controller *ctrl, const struct mem_param *param, int i)
{
uint32_t dcl;
int value;
value = spd_read_byte(ctrl->channel0[i], 11);
if (value < 0) {
return -1;
}
if (value != 2) {
dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
dcl &= ~DCL_DimmEccEn;
pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl);
}
return 0;
}
static int count_dimms(const struct mem_controller *ctrl)
{
int dimms;
unsigned index;
dimms = 0;
for(index = 0; index < 8; index += 2) {
uint32_t csbase;
csbase = pci_read_config32(ctrl->f2, (DRAM_CSBASE + index << 2));
if (csbase & 1) {
dimms += 1;
}
}
return dimms;
}
static void set_Twtr(const struct mem_controller *ctrl, const struct mem_param *param)
{
uint32_t dth;
unsigned clocks;
clocks = 1; /* AMD says hard code this */
dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH);
dth &= ~(DTH_TWTR_MASK << DTH_TWTR_SHIFT);
dth |= ((clocks - DTH_TWTR_BASE) << DTH_TWTR_SHIFT);
pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth);
}
static void set_Trwt(const struct mem_controller *ctrl, const struct mem_param *param)
{
uint32_t dth, dtl;
unsigned divisor;
unsigned latency;
unsigned clocks;
clocks = 0;
dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
latency = (dtl >> DTL_TCL_SHIFT) & DTL_TCL_MASK;
divisor = param->divisor;
if (is_opteron(ctrl)) {
if (latency == DTL_CL_2) {
if (divisor == ((6 << 0) + 0)) {
/* 166Mhz */
clocks = 3;
}
else if (divisor > ((6 << 0)+0)) {
/* 100Mhz && 133Mhz */
clocks = 2;
}
}
else if (latency == DTL_CL_2_5) {
clocks = 3;
}
else if (latency == DTL_CL_3) {
if (divisor == ((6 << 0)+0)) {
/* 166Mhz */
clocks = 4;
}
else if (divisor > ((6 << 0)+0)) {
/* 100Mhz && 133Mhz */
clocks = 3;
}
}
}
else /* Athlon64 */ {
if (is_registered(ctrl)) {
if (latency == DTL_CL_2) {
clocks = 2;
}
else if (latency == DTL_CL_2_5) {
clocks = 3;
}
else if (latency == DTL_CL_3) {
clocks = 3;
}
}
else /* Unbuffered */{
if (latency == DTL_CL_2) {
clocks = 3;
}
else if (latency == DTL_CL_2_5) {
clocks = 4;
}
else if (latency == DTL_CL_3) {
clocks = 4;
}
}
}
if ((clocks < DTH_TRWT_MIN) || (clocks > DTH_TRWT_MAX)) {
die("Unknown Trwt");
}
dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH);
dth &= ~(DTH_TRWT_MASK << DTH_TRWT_SHIFT);
dth |= ((clocks - DTH_TRWT_BASE) << DTH_TRWT_SHIFT);
pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth);
return;
}
static void set_Twcl(const struct mem_controller *ctrl, const struct mem_param *param)
{
/* Memory Clocks after CAS# */
uint32_t dth;
unsigned clocks;
if (is_registered(ctrl)) {
clocks = 2;
} else {
clocks = 1;
}
dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH);
dth &= ~(DTH_TWCL_MASK << DTH_TWCL_SHIFT);
dth |= ((clocks - DTH_TWCL_BASE) << DTH_TWCL_SHIFT);
pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth);
}
static void set_read_preamble(const struct mem_controller *ctrl, const struct mem_param *param)
{
uint32_t dch;
unsigned divisor;
unsigned rdpreamble;
divisor = param->divisor;
dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH);
dch &= ~(DCH_RDPREAMBLE_MASK << DCH_RDPREAMBLE_SHIFT);
rdpreamble = 0;
if (is_registered(ctrl)) {
if (divisor == ((10 << 1)+0)) {
/* 100Mhz, 9ns */
rdpreamble = ((9 << 1)+ 0);
}
else if (divisor == ((7 << 1)+1)) {
/* 133Mhz, 8ns */
rdpreamble = ((8 << 1)+0);
}
else if (divisor == ((6 << 1)+0)) {
/* 166Mhz, 7.5ns */
rdpreamble = ((7 << 1)+1);
}
}
else {
int slots;
int i;
slots = 0;
for(i = 0; i < 4; i++) {
if (ctrl->channel0[i]) {
slots += 1;
}
}
if (divisor == ((10 << 1)+0)) {
/* 100Mhz */
if (slots <= 2) {
/* 9ns */
rdpreamble = ((9 << 1)+0);
} else {
/* 14ns */
rdpreamble = ((14 << 1)+0);
}
}
else if (divisor == ((7 << 1)+1)) {
/* 133Mhz */
if (slots <= 2) {
/* 7ns */
rdpreamble = ((7 << 1)+0);
} else {
/* 11 ns */
rdpreamble = ((11 << 1)+0);
}
}
else if (divisor == ((6 << 1)+0)) {
/* 166Mhz */
if (slots <= 2) {
/* 6ns */
rdpreamble = ((7 << 1)+0);
} else {
/* 9ns */
rdpreamble = ((9 << 1)+0);
}
}
else if (divisor == ((5 << 1)+0)) {
/* 200Mhz */
if (slots <= 2) {
/* 5ns */
rdpreamble = ((5 << 1)+0);
} else {
/* 7ns */
rdpreamble = ((7 << 1)+0);
}
}
}
if ((rdpreamble < DCH_RDPREAMBLE_MIN) || (rdpreamble > DCH_RDPREAMBLE_MAX)) {
die("Unknown rdpreamble");
}
dch |= (rdpreamble - DCH_RDPREAMBLE_BASE) << DCH_RDPREAMBLE_SHIFT;
pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch);
}
static void set_max_async_latency(const struct mem_controller *ctrl, const struct mem_param *param)
{
uint32_t dch;
int i;
unsigned async_lat;
int dimms;
dimms = count_dimms(ctrl);
dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH);
dch &= ~(DCH_ASYNC_LAT_MASK << DCH_ASYNC_LAT_SHIFT);
async_lat = 0;
if (is_registered(ctrl)) {
if (dimms == 4) {
/* 9ns */
async_lat = 9;
}
else {
/* 8ns */
async_lat = 8;
}
}
else {
if (dimms > 3) {
die("Too many unbuffered dimms");
}
else if (dimms == 3) {
/* 7ns */
async_lat = 7;
}
else {
/* 6ns */
async_lat = 6;
}
}
dch |= ((async_lat - DCH_ASYNC_LAT_BASE) << DCH_ASYNC_LAT_SHIFT);
pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch);
}
static void set_idle_cycle_limit(const struct mem_controller *ctrl, const struct mem_param *param)
{
uint32_t dch;
/* AMD says to Hardcode this */
dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH);
dch &= ~(DCH_IDLE_LIMIT_MASK << DCH_IDLE_LIMIT_SHIFT);
dch |= DCH_IDLE_LIMIT_16 << DCH_IDLE_LIMIT_SHIFT;
dch |= DCH_DYN_IDLE_CTR_EN;
pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch);
}
static void spd_set_dram_timing(const struct mem_controller *ctrl, const struct mem_param *param)
{
int dimms;
int i;
init_Tref(ctrl, param);
for(i = 0; (i < 4) && ctrl->channel0[i]; i++) {
int rc;
/* DRAM Timing Low Register */
if (update_dimm_Trc (ctrl, param, i) < 0) goto dimm_err;
if (update_dimm_Trfc(ctrl, param, i) < 0) goto dimm_err;
if (update_dimm_Trcd(ctrl, param, i) < 0) goto dimm_err;
if (update_dimm_Trrd(ctrl, param, i) < 0) goto dimm_err;
if (update_dimm_Tras(ctrl, param, i) < 0) goto dimm_err;
if (update_dimm_Trp (ctrl, param, i) < 0) goto dimm_err;
/* DRAM Timing High Register */
if (update_dimm_Tref(ctrl, param, i) < 0) goto dimm_err;
/* DRAM Config Low */
if (update_dimm_x4 (ctrl, param, i) < 0) goto dimm_err;
if (update_dimm_ecc(ctrl, param, i) < 0) goto dimm_err;
continue;
dimm_err:
disable_dimm(ctrl, i);
}
/* DRAM Timing Low Register */
set_Twr(ctrl, param);
/* DRAM Timing High Register */
set_Twtr(ctrl, param);
set_Trwt(ctrl, param);
set_Twcl(ctrl, param);
/* DRAM Config High */
set_read_preamble(ctrl, param);
set_max_async_latency(ctrl, param);
set_idle_cycle_limit(ctrl, param);
}
static void sdram_set_spd_registers(const struct mem_controller *ctrl)
{
const struct mem_param *param;
spd_enable_2channels(ctrl);
spd_set_ram_size(ctrl);
spd_handle_unbuffered_dimms(ctrl);
param = spd_set_memclk(ctrl);
spd_set_dram_timing(ctrl, param);
order_dimms(ctrl);
}
#define TIMEOUT_LOOPS 300000
static void sdram_enable(int controllers, const struct mem_controller *ctrl)
{
int i;
/* Before enabling memory start the memory clocks */
for(i = 0; i < controllers; i++) {
uint32_t dch;
dch = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_HIGH);
dch |= DCH_MEMCLK_VALID;
pci_write_config32(ctrl[i].f2, DRAM_CONFIG_HIGH, dch);
}
/* And if necessary toggle the the reset on the dimms by hand */
memreset(controllers, ctrl);
for(i = 0; i < controllers; i++) {
uint32_t dcl;
/* Toggle DisDqsHys to get it working */
dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW);
#if 0
print_debug("dcl: ");
print_debug_hex32(dcl);
print_debug("\r\n");
#endif
#if 0
dcl &= ~DCL_DimmEccEn;
#endif
#warning "FIXME set the ECC type to perform"
#warning "FIXME initialize the scrub registers"
#if 1
if (dcl & DCL_DimmEccEn) {
print_debug("ECC enabled\r\n");
}
#endif
dcl |= DCL_DisDqsHys;
pci_write_config32(ctrl[i].f2, DRAM_CONFIG_LOW, dcl);
dcl &= ~DCL_DisDqsHys;
dcl &= ~DCL_DLL_Disable;
dcl &= ~DCL_D_DRV;
dcl &= ~DCL_QFC_EN;
dcl |= DCL_DramInit;
pci_write_config32(ctrl[i].f2, DRAM_CONFIG_LOW, dcl);
}
for(i = 0; i < controllers; i++) {
uint32_t dcl;
print_debug("Initializing memory: ");
int loops = 0;
do {
dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW);
loops += 1;
if ((loops & 1023) == 0) {
print_debug(".");
}
} while(((dcl & DCL_DramInit) != 0) && (loops < TIMEOUT_LOOPS));
if (loops >= TIMEOUT_LOOPS) {
print_debug(" failed\r\n");
} else {
print_debug(" done\r\n");
}
#if 1
if (dcl & DCL_DimmEccEn) {
print_debug("Clearing memory: ");
loops = 0;
dcl &= ~DCL_MemClrStatus;
pci_write_config32(ctrl[i].f2, DRAM_CONFIG_LOW, dcl);
do {
dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW);
loops += 1;
if ((loops & 1023) == 0) {
print_debug(" ");
print_debug_hex32(loops);
}
} while(((dcl & DCL_MemClrStatus) == 0) && (loops < TIMEOUT_LOOPS));
if (loops >= TIMEOUT_LOOPS) {
print_debug("failed\r\n");
} else {
print_debug("done\r\n");
}
pci_write_config32(ctrl[i].f3, SCRUB_ADDR_LOW, 0);
pci_write_config32(ctrl[i].f3, SCRUB_ADDR_HIGH, 0);
}
#endif
}
}
Reference in New Issue View Git Blame Copy Permalink