f124b88cfb
Instead of having the SMI handler power off the touchscreen on the way into suspend add power resource controls to the ACPI device so the power is managed by the kernel instead of the BIOS. BUG=b:35581264 TEST=manual testing on Eve to ensure that the touchscreen is still functional at boot and after suspend/resume, and that it does not draw power in suspend. Change-Id: Id9a98807d24bbc7dff32408f3d113f6fad5bc023 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
347 lines
11 KiB
Plaintext
347 lines
11 KiB
Plaintext
chip soc/intel/skylake
|
|
|
|
# Enable deep Sx states
|
|
register "deep_s3_enable_ac" = "0"
|
|
register "deep_s3_enable_dc" = "1"
|
|
register "deep_s5_enable_ac" = "1"
|
|
register "deep_s5_enable_dc" = "1"
|
|
register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN | DSX_EN_WAKE_PIN"
|
|
|
|
# GPE configuration
|
|
# Note that GPE events called out in ASL code rely on this
|
|
# route. i.e. If this route changes then the affected GPE
|
|
# offset bits also need to be changed.
|
|
register "gpe0_dw0" = "GPP_B"
|
|
register "gpe0_dw1" = "GPP_D"
|
|
register "gpe0_dw2" = "GPP_E"
|
|
|
|
# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
|
|
register "gen1_dec" = "0x00fc0801"
|
|
register "gen2_dec" = "0x000c0201"
|
|
# EC memory map range is 0x900-0x9ff
|
|
register "gen3_dec" = "0x00fc0901"
|
|
|
|
# FSP Configuration
|
|
register "ProbelessTrace" = "0"
|
|
register "EnableLan" = "0"
|
|
register "EnableSata" = "0"
|
|
register "SataSalpSupport" = "0"
|
|
register "SataMode" = "0"
|
|
register "SataPortsEnable[0]" = "0"
|
|
register "EnableAzalia" = "1"
|
|
register "DspEnable" = "1"
|
|
register "IoBufferOwnership" = "3"
|
|
register "EnableTraceHub" = "0"
|
|
register "XdciEnable" = "0"
|
|
register "SsicPortEnable" = "0"
|
|
register "SmbusEnable" = "1"
|
|
register "Cio2Enable" = "0"
|
|
register "ScsEmmcEnabled" = "1"
|
|
register "ScsEmmcHs400Enabled" = "1"
|
|
register "ScsSdCardEnabled" = "0"
|
|
register "IshEnable" = "0"
|
|
register "PttSwitch" = "0"
|
|
register "InternalGfx" = "1"
|
|
register "SkipExtGfxScan" = "1"
|
|
register "Device4Enable" = "1"
|
|
register "HeciEnabled" = "0"
|
|
register "FspSkipMpInit" = "1"
|
|
register "SaGv" = "3"
|
|
register "SerialIrqConfigSirqEnable" = "1"
|
|
register "PmConfigSlpS3MinAssert" = "2" # 50ms
|
|
register "PmConfigSlpS4MinAssert" = "1" # 1s
|
|
register "PmConfigSlpSusMinAssert" = "1" # 500ms
|
|
register "PmConfigSlpAMinAssert" = "3" # 2s
|
|
register "PmTimerDisabled" = "1"
|
|
|
|
register "pirqa_routing" = "PCH_IRQ11"
|
|
register "pirqb_routing" = "PCH_IRQ10"
|
|
register "pirqc_routing" = "PCH_IRQ11"
|
|
register "pirqd_routing" = "PCH_IRQ11"
|
|
register "pirqe_routing" = "PCH_IRQ11"
|
|
register "pirqf_routing" = "PCH_IRQ11"
|
|
register "pirqg_routing" = "PCH_IRQ11"
|
|
register "pirqh_routing" = "PCH_IRQ11"
|
|
|
|
# VR Settings Configuration for 4 Domains
|
|
#+----------------+-------+-------+-------+-------+
|
|
#| Domain/Setting | SA | IA | GTUS | GTS |
|
|
#+----------------+-------+-------+-------+-------+
|
|
#| Psi1Threshold | 20A | 20A | 20A | 20A |
|
|
#| Psi2Threshold | 2A | 2A | 2A | 2A |
|
|
#| Psi3Threshold | 1A | 1A | 1A | 1A |
|
|
#| Psi3Enable | 1 | 1 | 1 | 1 |
|
|
#| Psi4Enable | 1 | 1 | 1 | 1 |
|
|
#| ImonSlope | 0 | 0 | 0 | 0 |
|
|
#| ImonOffset | 0 | 0 | 0 | 0 |
|
|
#| IccMax | 4A | 24A | 24A | 24A |
|
|
#| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V |
|
|
#| AcLoadline | 14.9 | 5 | 5.7 | 4.57 |
|
|
#| DcLoadline | 14.2 | 4.86 | 4.2 | 4.3 |
|
|
#+----------------+-------+-------+-------+-------+
|
|
register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
|
|
.vr_config_enable = 1,
|
|
.psi1threshold = VR_CFG_AMP(20),
|
|
.psi2threshold = VR_CFG_AMP(2),
|
|
.psi3threshold = VR_CFG_AMP(1),
|
|
.psi3enable = 1,
|
|
.psi4enable = 1,
|
|
.imon_slope = 0x0,
|
|
.imon_offset = 0x0,
|
|
.icc_max = VR_CFG_AMP(4),
|
|
.voltage_limit = 1520,
|
|
.ac_loadline = 1490,
|
|
.dc_loadline = 1420,
|
|
}"
|
|
|
|
register "domain_vr_config[VR_IA_CORE]" = "{
|
|
.vr_config_enable = 1,
|
|
.psi1threshold = VR_CFG_AMP(20),
|
|
.psi2threshold = VR_CFG_AMP(2),
|
|
.psi3threshold = VR_CFG_AMP(1),
|
|
.psi3enable = 1,
|
|
.psi4enable = 1,
|
|
.imon_slope = 0x0,
|
|
.imon_offset = 0x0,
|
|
.icc_max = VR_CFG_AMP(24),
|
|
.voltage_limit = 1520,
|
|
.ac_loadline = 500,
|
|
.dc_loadline = 486,
|
|
}"
|
|
|
|
register "domain_vr_config[VR_GT_UNSLICED]" = "{
|
|
.vr_config_enable = 1,
|
|
.psi1threshold = VR_CFG_AMP(20),
|
|
.psi2threshold = VR_CFG_AMP(2),
|
|
.psi3threshold = VR_CFG_AMP(1),
|
|
.psi3enable = 1,
|
|
.psi4enable = 1,
|
|
.imon_slope = 0x0,
|
|
.imon_offset = 0x0,
|
|
.icc_max = VR_CFG_AMP(24),
|
|
.voltage_limit = 1520,
|
|
.ac_loadline = 570,
|
|
.dc_loadline = 420,
|
|
}"
|
|
|
|
register "domain_vr_config[VR_GT_SLICED]" = "{
|
|
.vr_config_enable = 1,
|
|
.psi1threshold = VR_CFG_AMP(20),
|
|
.psi2threshold = VR_CFG_AMP(2),
|
|
.psi3threshold = VR_CFG_AMP(1),
|
|
.psi3enable = 1,
|
|
.psi4enable = 1,
|
|
.imon_slope = 0x0,
|
|
.imon_offset = 0x0,
|
|
.icc_max = VR_CFG_AMP(24),
|
|
.voltage_limit = 1520,
|
|
.ac_loadline = 457,
|
|
.dc_loadline = 430,
|
|
}"
|
|
|
|
# Enable Root port 1 with SRCCLKREQ1#
|
|
register "PcieRpEnable[0]" = "1"
|
|
register "PcieRpClkReqSupport[0]" = "1"
|
|
register "PcieRpClkReqNumber[0]" = "1"
|
|
|
|
# Enable Root port 5 with SRCCLKREQ4#
|
|
register "PcieRpEnable[4]" = "1"
|
|
register "PcieRpClkReqSupport[4]" = "1"
|
|
register "PcieRpClkReqNumber[4]" = "4"
|
|
|
|
register "usb2_ports[0]" = "USB2_PORT_LONG(OC0)" # Type-C Port 1
|
|
register "usb2_ports[1]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
|
|
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
|
|
register "usb2_ports[4]" = "USB2_PORT_LONG(OC1)" # Type-C Port 2
|
|
register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # H1
|
|
register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Empty
|
|
|
|
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1
|
|
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2
|
|
register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Empty
|
|
register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Empty
|
|
|
|
# Touchscreen
|
|
register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3"
|
|
register "i2c[0]" = "{
|
|
.speed = I2C_SPEED_FAST_PLUS,
|
|
.rise_time_ns = 98,
|
|
.fall_time_ns = 38,
|
|
}"
|
|
|
|
# Enable I2C1 bus early for TPM access
|
|
register "i2c_voltage[1]" = "I2C_VOLTAGE_3V3"
|
|
register "i2c[1]" = "{
|
|
.early_init = 1,
|
|
.speed = I2C_SPEED_FAST,
|
|
.rise_time_ns = 112,
|
|
.fall_time_ns = 34,
|
|
}"
|
|
|
|
# Touchpad
|
|
register "i2c_voltage[2]" = "I2C_VOLTAGE_1V8"
|
|
register "i2c[2]" = "{
|
|
.speed = I2C_SPEED_FAST,
|
|
.speed_config[0] = {
|
|
.speed = I2C_SPEED_FAST,
|
|
.scl_lcnt = 186,
|
|
.scl_hcnt = 93,
|
|
.sda_hold = 36,
|
|
}
|
|
}"
|
|
|
|
# Audio
|
|
register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8"
|
|
register "i2c[4]" = "{
|
|
.speed = I2C_SPEED_FAST,
|
|
.rise_time_ns = 240,
|
|
.fall_time_ns = 30,
|
|
}"
|
|
|
|
# Must leave UART0 enabled or SD/eMMC will not work as PCI
|
|
register "SerialIoDevMode" = "{
|
|
[PchSerialIoIndexI2C0] = PchSerialIoPci,
|
|
[PchSerialIoIndexI2C1] = PchSerialIoPci,
|
|
[PchSerialIoIndexI2C2] = PchSerialIoPci,
|
|
[PchSerialIoIndexI2C3] = PchSerialIoDisabled,
|
|
[PchSerialIoIndexI2C4] = PchSerialIoPci,
|
|
[PchSerialIoIndexI2C5] = PchSerialIoDisabled,
|
|
[PchSerialIoIndexSpi0] = PchSerialIoPci,
|
|
[PchSerialIoIndexSpi1] = PchSerialIoDisabled,
|
|
[PchSerialIoIndexUart0] = PchSerialIoSkipInit,
|
|
[PchSerialIoIndexUart1] = PchSerialIoDisabled,
|
|
[PchSerialIoIndexUart2] = PchSerialIoSkipInit,
|
|
}"
|
|
|
|
register "speed_shift_enable" = "1"
|
|
register "dptf_enable" = "1"
|
|
register "tdp_pl2_override" = "7"
|
|
register "tcc_offset" = "10"
|
|
|
|
device cpu_cluster 0 on
|
|
device lapic 0 on end
|
|
end
|
|
device domain 0 on
|
|
device pci 00.0 on end # Host Bridge
|
|
device pci 02.0 on end # Integrated Graphics Device
|
|
device pci 14.0 on end # USB xHCI
|
|
device pci 14.1 off end # USB xDCI (OTG)
|
|
device pci 14.2 on end # Thermal Subsystem
|
|
device pci 15.0 on
|
|
chip drivers/i2c/hid
|
|
register "generic.hid" = ""WCOM50C1""
|
|
register "generic.desc" = ""WCOM Digitizer""
|
|
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)"
|
|
register "generic.speed" = "I2C_SPEED_FAST_PLUS"
|
|
register "generic.has_power_resource" = "1"
|
|
register "generic.disable_gpio_export_in_crs" = "1"
|
|
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C22)"
|
|
register "generic.enable_delay_ms" = "250"
|
|
register "hid_desc_reg_offset" = "0x1"
|
|
device i2c 0a on end
|
|
end
|
|
end # I2C #0
|
|
device pci 15.1 on
|
|
chip drivers/i2c/tpm
|
|
register "hid" = ""GOOG0005""
|
|
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E0_IRQ)"
|
|
device i2c 50 on end
|
|
end
|
|
end # I2C #1
|
|
device pci 15.2 on
|
|
chip drivers/i2c/hid
|
|
register "generic.hid" = ""ACPI0C50""
|
|
register "generic.desc" = ""Touchpad""
|
|
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
|
|
register "hid_desc_reg_offset" = "0x1"
|
|
device i2c 49 on end
|
|
end
|
|
chip drivers/i2c/generic
|
|
register "hid" = ""GOOG0008""
|
|
register "desc" = ""Touchpad EC Interface""
|
|
device i2c 1e on end
|
|
end
|
|
end # I2C #2
|
|
device pci 15.3 off end # I2C #3
|
|
device pci 16.0 on end # Management Engine Interface 1
|
|
device pci 16.1 off end # Management Engine Interface 2
|
|
device pci 16.2 off end # Management Engine IDE-R
|
|
device pci 16.3 off end # Management Engine KT Redirection
|
|
device pci 16.4 off end # Management Engine Interface 3
|
|
device pci 17.0 off end # SATA
|
|
device pci 19.0 on end # UART #2
|
|
device pci 19.1 off end # I2C #5
|
|
device pci 19.2 on
|
|
chip drivers/i2c/max98927
|
|
register "interleave_mode" = "1"
|
|
register "uid" = "0"
|
|
register "desc" = ""Right Speaker Amp""
|
|
register "name" = ""MAXR""
|
|
device i2c 39 on end
|
|
end
|
|
chip drivers/i2c/max98927
|
|
register "interleave_mode" = "1"
|
|
register "uid" = "1"
|
|
register "desc" = ""Left Speaker Amp""
|
|
register "name" = ""MAXL""
|
|
device i2c 3a on end
|
|
end
|
|
chip drivers/i2c/generic
|
|
register "hid" = ""10EC5663""
|
|
register "name" = ""RT53""
|
|
register "desc" = ""Realtek RT5663""
|
|
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D9)"
|
|
device i2c 13 on end
|
|
end
|
|
chip drivers/i2c/generic
|
|
register "hid" = ""10EC5514""
|
|
register "name" = ""RT54""
|
|
register "desc" = ""Realtek RT5514""
|
|
device i2c 57 on end
|
|
end
|
|
end # I2C #4
|
|
device pci 1c.0 on
|
|
chip drivers/intel/wifi
|
|
register "wake" = "GPE0_PCI_EXP"
|
|
device pci 00.0 on end
|
|
end
|
|
end # PCI Express Port 1
|
|
device pci 1c.1 off end # PCI Express Port 2
|
|
device pci 1c.2 off end # PCI Express Port 3
|
|
device pci 1c.3 off end # PCI Express Port 4
|
|
device pci 1c.4 on end # PCI Express Port 5
|
|
device pci 1c.5 off end # PCI Express Port 6
|
|
device pci 1c.6 off end # PCI Express Port 7
|
|
device pci 1c.7 off end # PCI Express Port 8
|
|
device pci 1d.0 off end # PCI Express Port 9
|
|
device pci 1d.1 off end # PCI Express Port 10
|
|
device pci 1d.2 off end # PCI Express Port 11
|
|
device pci 1d.3 off end # PCI Express Port 12
|
|
device pci 1e.0 on end # UART #0
|
|
device pci 1e.1 off end # UART #1
|
|
device pci 1e.2 on
|
|
chip drivers/spi/acpi
|
|
register "hid" = "ACPI_DT_NAMESPACE_HID"
|
|
register "compat_string" = ""realtek,rt5514""
|
|
register "irq" = "ACPI_IRQ_LEVEL_HIGH(GPP_F10_IRQ)"
|
|
device spi 0 on end
|
|
end
|
|
end # GSPI #0
|
|
device pci 1e.3 off end # GSPI #1
|
|
device pci 1e.4 on end # eMMC
|
|
device pci 1e.5 off end # SDIO
|
|
device pci 1e.6 off end # SDCard
|
|
device pci 1f.0 on
|
|
chip ec/google/chromeec
|
|
device pnp 0c09.0 on end
|
|
end
|
|
end # LPC Interface
|
|
device pci 1f.1 on end # P2SB
|
|
device pci 1f.2 on end # Power Management Controller
|
|
device pci 1f.3 on end # Intel HDA
|
|
device pci 1f.4 on end # SMBus
|
|
device pci 1f.5 on end # PCH SPI
|
|
device pci 1f.6 off end # GbE
|
|
end
|
|
end
|