sravan/system76-coreboot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
f40f5b6dd5274f02bb0c84d05ed1cf112e1187e6
system76-coreboot/payloads/external/Makefile.mk
Maximilian Brune b62f86be43 payloads: Add leanefi payload 
This adds another external payload to coreboot. The payload has been
heavily based on u-boots UEFI implementation.

The leanefi payload is basically a translator from coreboot to UEFI. It
takes the coreboot tables and transforms them into UEFI interfaces.
Although it can potentially load any efi application that can
handle the minimized interface that leanefi provides, it has only
been tested with LinuxBoot (v6.3.5) as a payload. It has been optimized
to support only those interfaces that Linux requires to start.

Among other leanefi does not support:
- efi capsule update (also efi system resource table)
- efi variables
- efi text input protocol (it can only output)
- most boot services. mostly memory services are left (e.g. alloc/free)
- all runtime services (although there is still a very small runtime
  footprint that is planned to be removed in the near future)
- TCG2/TPM (although that is mostly because of laziness)
The README.md currently provides more details on why.

The payload currently only supports arm64 and has only been tested
on emulation/simulator targets. The original motivation was to get ACPI
on arm64 published to the OS without using EDK2. It is however also
possible to supply the leanefi with a FDT that is published to the OS.
At that point one would however probably use coreboot only instead of
this shim layer on top. It would be way nicer to have Linux support
something else than UEFI to propagate the ACPI tables, but it requires
to get the Linux maintainer/community on board. So for now this shim
layer ciruimvents that.

LBBR Test:
// 1. dump FDT from QEMU like mentioned in aarch64 coreboot doc
// 2. compile u-root however you like (aarch64)
// 3. compile Linux (embed u-root initramfs via Kconfig)
// 4. copy Linux kernel to payloads/leanefi/Image
// 5. copy following coreboot defconfig to configs/defconfig:
CONFIG_BOARD_EMULATION_QEMU_AARCH64=y
CONFIG_PAYLOAD_NONE=n
CONFIG_PAYLOAD_LEANEFI=y
CONFIG_LEANEFI_PAYLOAD=y
CONFIG_LEANEFI_PAYLOAD_PATH="[path-to-linux]/arch/arm64/boot/Image"
CONFIG_LEANEFI_FDT=y
CONFIG_LEANEFI_FDT_PATH="[path-to-dumped-DTB]"
// 6. compile coreboot
make defconfig
make -j$(nproc)
// 7. run qemu like mentioned in coreboot doc (no FIT)
// 8. say hello to u-root and optionally kexec into the next kernel

Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I4093378e89c3cb43fb0846666de80a7da36b03f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ron Minnich <rminnich@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-06-04 00:26:14 +00:00

462 lines
19 KiB
Makefile
Raw Blame History

## SPDX-License-Identifier: GPL-2.0-only
# set up payload config and version files for later inclusion
ifeq ($(CONFIG_PAYLOAD_BUILD_SEABIOS),y)
PAYLOAD_CONFIG=payloads/external/SeaBIOS/seabios/.config
PAYLOAD_VERSION=payloads/external/SeaBIOS/seabios/out/autoversion.h
endif
ifeq ($(CONFIG_PAYLOAD_FILO),y)
PAYLOAD_CONFIG=payloads/external/FILO/filo/.config
PAYLOAD_VERSION=payloads/external/FILO/filo/build/version.h
endif
ifeq ($(CONFIG_PAYLOAD_DEPTHCHARGE),y)
PAYLOAD_CONFIG=payloads/external/depthcharge/depthcharge/.config
$(PAYLOAD_CONFIG): payloads/external/depthcharge/depthcharge/build/depthcharge.elf
ifeq ($(call strip_quotes,$(CONFIG_MAINBOARD_DEPTHCHARGE)),)
BOARD=$(call ws_to_under,$(call strip_quotes,$(call tolower,$(CONFIG_MAINBOARD_PART_NUMBER))))
else
BOARD=$(CONFIG_MAINBOARD_DEPTHCHARGE)
endif
#TODO: Figure out version
endif
ifeq ($(CONFIG_PAYLOAD_LINUX)$(CONFIG_PAYLOAD_LINUXBOOT),y)
ifneq ($(strip $(call strip_quotes,$(CONFIG_LINUX_COMMAND_LINE))),)
ADDITIONAL_PAYLOAD_CONFIG+=-C $(CONFIG_LINUX_COMMAND_LINE)
endif
ifneq ($(strip $(call strip_quotes,$(CONFIG_LINUX_INITRD)$(CONFIG_LINUXBOOT_INITRAMFS_PATH))),)
ifneq ($(CONFIG_LINUXBOOT_ARM64),y)
ADDITIONAL_PAYLOAD_CONFIG+=-I $(CONFIG_LINUX_INITRD)$(CONFIG_LINUXBOOT_INITRAMFS_PATH)$(CONFIG_LINUXBOOT_INITRAMFS_SUFFIX)
prebuilt-files += $(strip $(call strip_quotes,$(CONFIG_LINUX_INITRD)$(CONFIG_LINUXBOOT_INITRAMFS)))
endif
endif
endif
ifneq ($(strip $(call strip_quotes,$(CONFIG_PAYLOAD_OPTIONS))),)
ADDITIONAL_PAYLOAD_CONFIG+=$(strip $(call strip_quotes,$(CONFIG_PAYLOAD_OPTIONS)))
endif
cbfs-files-y += $(CONFIG_CBFS_PREFIX)/payload
$(CONFIG_CBFS_PREFIX)/payload-file := $(CONFIG_PAYLOAD_FILE)
ifeq ($(CONFIG_PAYLOAD_IS_FLAT_BINARY),y)
$(CONFIG_CBFS_PREFIX)/payload-type := flat-binary
else
$(CONFIG_CBFS_PREFIX)/payload-type := payload
endif
$(CONFIG_CBFS_PREFIX)/payload-compression := $(CBFS_PAYLOAD_COMPRESS_FLAG)
$(CONFIG_CBFS_PREFIX)/payload-options := $(ADDITIONAL_PAYLOAD_CONFIG)
cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += payload_config
payload_config-file := $(PAYLOAD_CONFIG)
payload_config-type := raw
cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += payload_revision
payload_revision-file := $(PAYLOAD_VERSION)
payload_revision-type := raw
cbfs-files-$(CONFIG_GRUB2_INCLUDE_RUNTIME_CONFIG_FILE) += etc/grub.cfg
etc/grub.cfg-file := $(CONFIG_GRUB2_RUNTIME_CONFIG_FILE)
etc/grub.cfg-type := raw
etc/grub.cfg-required := the GRUB runtime configuration file ($(CONFIG_GRUB2_RUNTIME_CONFIG_FILE))
# SeaBIOS
SEABIOS_CC_OFFSET=$(if $(filter %ccache,$(HOSTCC)),2,1)
SEABIOS_TARGET_PATH=payloads/external/SeaBIOS/seabios/out/bios.bin.elf
$(SEABIOS_TARGET_PATH): $(DOTCONFIG)
$(MAKE) -C payloads/external/SeaBIOS \
HOSTCC="$(HOSTCC)" \
CC=$(word $(SEABIOS_CC_OFFSET),$(CC_x86_32)) \
CFLAGS="$(patsubst $(word $(SEABIOS_CC_OFFSET),$(CC_x86_32))%,,$(wordlist $(SEABIOS_CC_OFFSET),9999,$(CC_x86_32)))" \
LD=$(word 1,$(LD_x86_32)) LDFLAGS="$(patsubst $(word 1,$(LD_x86_32))%,,$(LD_x86_32))" \
OBJDUMP="$(OBJDUMP_x86_32)" \
OBJCOPY="$(OBJCOPY_x86_32)" STRIP="$(STRIP_x86_32)" \
AS="$(AS_x86_32)" IASL="$(IASL)" \
CONFIG_SEABIOS_MASTER=$(CONFIG_SEABIOS_MASTER) \
CONFIG_SEABIOS_STABLE=$(CONFIG_SEABIOS_STABLE) \
CONFIG_SEABIOS_REVISION=$(CONFIG_SEABIOS_REVISION) \
CONFIG_SEABIOS_REVISION_ID=$(CONFIG_SEABIOS_REVISION_ID) \
CONFIG_PAYLOAD_CONFIGFILE=$(CONFIG_PAYLOAD_CONFIGFILE) \
CONFIG_SEABIOS_THREAD_OPTIONROMS=$(CONFIG_SEABIOS_THREAD_OPTIONROMS) \
CONFIG_SEABIOS_VGA_COREBOOT=$(CONFIG_SEABIOS_VGA_COREBOOT) \
CONFIG_DRIVERS_UART_8250IO=$(CONFIG_DRIVERS_UART_8250IO) \
CONFIG_DRIVERS_UART_8250MEM=$(CONFIG_DRIVERS_UART_8250MEM) \
CONFIG_HUDSON_UART=$(CONFIG_HUDSON_UART) \
CONFIG_CONSOLE_SERIAL=$(CONFIG_CONSOLE_SERIAL) \
CONFIG_TTYS0_BASE=$(CONFIG_TTYS0_BASE) \
CONFIG_SEABIOS_DEBUG_LEVEL=$(CONFIG_SEABIOS_DEBUG_LEVEL) \
CONFIG_DRIVERS_UART_8250MEM_32=$(CONFIG_DRIVERS_UART_8250MEM_32) \
CONFIG_ENABLE_HSUART=$(CONFIG_ENABLE_HSUART) \
CONFIG_CONSOLE_UART_BASE_ADDRESS=$(CONFIG_CONSOLE_UART_BASE_ADDRESS) \
CONFIG_SEABIOS_HARDWARE_IRQ=$(CONFIG_SEABIOS_HARDWARE_IRQ)
payloads/external/SeaBIOS/seabios/out/vgabios.bin: $(SEABIOS_TARGET_PATH)
payloads/external/SeaBIOS/seabios/.config: $(SEABIOS_TARGET_PATH)
payloads/external/SeaBIOS/seabios/out/autoversion.h: $(SEABIOS_TARGET_PATH)
cbfs-files-$(CONFIG_SEABIOS_SECONDARY_PAYLOAD) += img/seabios
img/seabios-file := $(SEABIOS_TARGET_PATH)
img/seabios-type := payload
img/seabios-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
# add a SeaBIOS bootorder file
ifneq ($(strip $(CONFIG_SEABIOS_BOOTORDER_FILE)),)
cbfs-files-y += bootorder
bootorder-file := $(strip $(CONFIG_SEABIOS_BOOTORDER_FILE))
bootorder-type := raw
endif
ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),)
ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),0)
$(call add_intermediate, seabios_ps2_timeout, $(CBFSTOOL))
@printf " SeaBIOS Wait up to $(CONFIG_SEABIOS_PS2_TIMEOUT) ms for PS/2 keyboard controller initialization\n"
$(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/ps2-keyboard-spinup 2>/dev/null)
$(CBFSTOOL) $< add-int -i $(CONFIG_SEABIOS_PS2_TIMEOUT) -n etc/ps2-keyboard-spinup
endif
endif
ifeq ($(CONFIG_SEABIOS_ADD_SERCON_PORT_FILE),y)
$(call add_intermediate, seabios_sercon, $(CBFSTOOL))
@printf " SeaBIOS Add sercon-port file\n"
$(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/sercon-port 2>/dev/null)
$(CBFSTOOL) $< add-int -i $(CONFIG_SEABIOS_SERCON_PORT_ADDR) -n etc/sercon-port
endif
ifeq ($(CONFIG_SEABIOS_THREAD_OPTIONROMS),y)
$(call add_intermediate, seabios_thread_optionroms, $(CBFSTOOL))
@printf " SeaBIOS Thread optionroms\n"
$(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/threads 2>/dev/null)
$(CBFSTOOL) $< add-int -i 2 -n etc/threads
endif
ifeq ($(CONFIG_PAYLOAD_SEAGRUB),y)
ifneq ($(CONFIG_SEAGRUB_ALLOW_SEABIOS_BOOTMENU),y)
$(call add_intermediate, seabios_bootmenu, $(CBFSTOOL))
@printf " SeaBIOS Disable boot menu\n"
$(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/show-boot-menu 2>/dev/null)
$(CBFSTOOL) $< add-int -i 0 -n etc/show-boot-menu
else
$(call add_intermediate, seabios_bootmenu, $(CBFSTOOL))
$(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/show-boot-menu 2>/dev/null)
endif
endif
# Depthcharge
payloads/external/depthcharge/depthcharge/build/depthcharge.elf depthcharge: $(DOTCONFIG) $(CBFSTOOL)
$(MAKE) -C payloads/external/depthcharge \
BOARD=$(BOARD) \
MFLAGS= MAKEFLAGS= \
DEPTHCHARGE_REPO=$(CONFIG_DEPTHCHARGE_REPO) \
DEPTHCHARGE_BRANCH=$(CONFIG_DEPTHCHARGE_BRANCH) \
DEPTHCHARGE_MASTER=$(CONFIG_DEPTHCHARGE_MASTER) \
DEPTHCHARGE_STABLE=$(CONFIG_DEPTHCHARGE_STABLE) \
DEPTHCHARGE_REVISION=$(CONFIG_DEPTHCHARGE_REVISION) \
DEPTHCHARGE_REVISION_ID=$(CONFIG_DEPTHCHARGE_REVISION_ID) \
OVERRIDE_DEFCONFIG=$(CONFIG_LP_DEFCONFIG_OVERRIDE)
# edk2
$(obj)/UEFIPAYLOAD.fd: $(DOTCONFIG)
$(MAKE) -C payloads/external/edk2 UefiPayloadPkg \
HOSTCC="$(HOSTCC)" \
CC="$(HOSTCC)" \
CONFIG_EDK2_REPOSITORY=$(CONFIG_EDK2_REPOSITORY) \
CONFIG_EDK2_TAG_OR_REV=$(CONFIG_EDK2_TAG_OR_REV) \
CONFIG_EDK2_UEFIPAYLOAD=$(CONFIG_EDK2_UEFIPAYLOAD) \
CONFIG_EDK2_UNIVERSAL_PAYLOAD=$(CONFIG_EDK2_UNIVERSAL_PAYLOAD) \
CONFIG_EDK2_REPO_OFFICIAL=$(CONFIG_EDK2_REPO_OFFICIAL) \
CONFIG_EDK2_REPO_MRCHROMEBOX=$(CONFIG_EDK2_REPO_MRCHROMEBOX) \
CONFIG_EDK2_REPO_CUSTOM=$(CONFIG_EDK2_REPO_CUSTOM) \
CONFIG_EDK2_CPU_TIMER_LIB=$(CONFIG_EDK2_CPU_TIMER_LIB) \
CONFIG_EDK2_CUSTOM_BUILD_PARAMS=$(CONFIG_EDK2_CUSTOM_BUILD_PARAMS) \
CONFIG_EDK2_USE_EDK2_PLATFORMS=$(CONFIG_EDK2_USE_EDK2_PLATFORMS) \
CONFIG_EDK2_PLATFORMS_REPOSITORY=$(CONFIG_EDK2_PLATFORMS_REPOSITORY) \
CONFIG_EDK2_PLATFORMS_TAG_OR_REV=$(CONFIG_EDK2_PLATFORMS_TAG_OR_REV) \
CONFIG_EDK2_DEBUG=$(CONFIG_EDK2_DEBUG) \
CONFIG_EDK2_RELEASE=$(CONFIG_EDK2_RELEASE) \
CONFIG_EDK2_BOOTSPLASH_FILE=$(CONFIG_EDK2_BOOTSPLASH_FILE) \
CONFIG_EDK2_BOOT_MANAGER_ESCAPE=$(CONFIG_EDK2_BOOT_MANAGER_ESCAPE) \
CONFIG_EDK2_BOOT_TIMEOUT=$(CONFIG_EDK2_BOOT_TIMEOUT) \
CONFIG_EDK2_CBMEM_LOGGING=$(CONFIG_EDK2_CBMEM_LOGGING) \
CONFIG_EDK2_FOLLOW_BGRT_SPEC=$(CONFIG_EDK2_FOLLOW_BGRT_SPEC) \
CONFIG_EDK2_FULL_SCREEN_SETUP=$(CONFIG_EDK2_FULL_SCREEN_SETUP) \
CONFIG_EDK2_HAVE_EFI_SHELL=$(CONFIG_EDK2_HAVE_EFI_SHELL) \
CONFIG_EDK2_PRIORITIZE_INTERNAL=$(CONFIG_EDK2_PRIORITIZE_INTERNAL) \
CONFIG_EDK2_PS2_SUPPORT=$(CONFIG_EDK2_PS2_SUPPORT) \
CONFIG_EDK2_SERIAL_SUPPORT=$(CONFIG_EDK2_SERIAL_SUPPORT) \
CONFIG_EDK2_SD_MMC_TIMEOUT=$(CONFIG_EDK2_SD_MMC_TIMEOUT) \
CONFIG_ECAM_MMCONF_BASE_ADDRESS=$(CONFIG_ECAM_MMCONF_BASE_ADDRESS) \
CONFIG_ECAM_MMCONF_LENGTH=$(CONFIG_ECAM_MMCONF_LENGTH) \
CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS=$(CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS) \
CONFIG_CPU_XTAL_HZ=$(CONFIG_CPU_XTAL_HZ) \
CONFIG_SMMSTORE_V2=$(CONFIG_SMMSTORE_V2) \
CONFIG_EDK2_SECURE_BOOT_SUPPORT=$(CONFIG_EDK2_SECURE_BOOT_SUPPORT) \
CONFIG_EDK2_GOP_DRIVER=$(CONFIG_EDK2_GOP_DRIVER) \
CONFIG_EDK2_GOP_FILE=$(CONFIG_EDK2_GOP_FILE) \
CONFIG_INTEL_GMA_VBT_FILE=$(CONFIG_INTEL_GMA_VBT_FILE) \
CONFIG_EDK2_DISABLE_TPM=$(CONFIG_EDK2_DISABLE_TPM) \
CONFIG_EDK2_UFS_ENABLE=$(CONFIG_EDK2_UFS_ENABLE) \
CONFIG_EDK2_PCO_MMIO_EMMC=$(CONFIG_EDK2_PCO_MMIO_EMMC) \
CONFIG_EDK2_USE_LAPIC_TIMER=$(CONFIG_EDK2_USE_LAPIC_TIMER) \
GCC_CC_x86_32=$(GCC_CC_x86_32) \
GCC_CC_x86_64=$(GCC_CC_x86_64) \
GCC_CC_arm=$(GCC_CC_arm) \
GCC_CC_arm64=$(GCC_CC_arm64) \
OBJCOPY_x86_32=$(OBJCOPY_x86_32) \
OBJCOPY_x86_64=$(OBJCOPY_x86_64) \
OBJCOPY_arm=$(OBJCOPY_arm) \
OBJCOPY_arm64=$(OBJCOPY_arm64) \
MFLAGS= MAKEFLAGS=
$(obj)/ShimmedUniversalPayload.elf: $(DOTCONFIG)
$(MAKE) -C payloads/external/edk2 UniversalPayload \
HOSTCC="$(HOSTCC)" \
CC="$(HOSTCC)" \
CONFIG_EDK2_REPOSITORY=$(CONFIG_EDK2_REPOSITORY) \
CONFIG_EDK2_TAG_OR_REV=$(CONFIG_EDK2_TAG_OR_REV) \
CONFIG_EDK2_UEFIPAYLOAD=$(CONFIG_EDK2_UEFIPAYLOAD) \
CONFIG_EDK2_UNIVERSAL_PAYLOAD=$(CONFIG_EDK2_UNIVERSAL_PAYLOAD) \
CONFIG_EDK2_REPO_OFFICIAL=$(CONFIG_EDK2_REPO_OFFICIAL) \
CONFIG_EDK2_REPO_MRCHROMEBOX=$(CONFIG_EDK2_REPO_MRCHROMEBOX) \
CONFIG_EDK2_REPO_CUSTOM=$(CONFIG_EDK2_REPO_CUSTOM) \
CONFIG_EDK2_CPU_TIMER_LIB=$(CONFIG_EDK2_CPU_TIMER_LIB) \
CONFIG_EDK2_CUSTOM_BUILD_PARAMS=$(CONFIG_EDK2_CUSTOM_BUILD_PARAMS) \
CONFIG_EDK2_DEBUG=$(CONFIG_EDK2_DEBUG) \
CONFIG_EDK2_RELEASE=$(CONFIG_EDK2_RELEASE) \
CONFIG_EDK2_BOOTSPLASH_FILE=$(CONFIG_EDK2_BOOTSPLASH_FILE) \
CONFIG_EDK2_BOOT_MANAGER_ESCAPE=$(CONFIG_EDK2_BOOT_MANAGER_ESCAPE) \
CONFIG_EDK2_BOOT_TIMEOUT=$(CONFIG_EDK2_BOOT_TIMEOUT) \
CONFIG_EDK2_CBMEM_LOGGING=$(CONFIG_EDK2_CBMEM_LOGGING) \
CONFIG_EDK2_FOLLOW_BGRT_SPEC=$(CONFIG_EDK2_FOLLOW_BGRT_SPEC) \
CONFIG_EDK2_FULL_SCREEN_SETUP=$(CONFIG_EDK2_FULL_SCREEN_SETUP) \
CONFIG_EDK2_HAVE_EFI_SHELL=$(CONFIG_EDK2_HAVE_EFI_SHELL) \
CONFIG_EDK2_PRIORITIZE_INTERNAL=$(CONFIG_EDK2_PRIORITIZE_INTERNAL) \
CONFIG_EDK2_PS2_SUPPORT=$(CONFIG_EDK2_PS2_SUPPORT) \
CONFIG_EDK2_SERIAL_SUPPORT=$(CONFIG_EDK2_SERIAL_SUPPORT) \
CONFIG_EDK2_SD_MMC_TIMEOUT=$(CONFIG_EDK2_SD_MMC_TIMEOUT) \
CONFIG_EDK2_UNIVERSAL_PAYLOAD=$(CONFIG_EDK2_UNIVERSAL_PAYLOAD) \
CONFIG_ECAM_MMCONF_BASE_ADDRESS=$(CONFIG_ECAM_MMCONF_BASE_ADDRESS) \
CONFIG_ECAM_MMCONF_LENGTH=$(CONFIG_ECAM_MMCONF_LENGTH) \
CONFIG_CPU_XTAL_HZ=$(CONFIG_CPU_XTAL_HZ) \
CONFIG_SMMSTORE_V2=$(CONFIG_SMMSTORE_V2) \
GCC_CC_x86_32=$(GCC_CC_x86_32) \
GCC_CC_x86_64=$(GCC_CC_x86_64) \
GCC_CC_arm=$(GCC_CC_arm) \
GCC_CC_arm64=$(GCC_CC_arm64) \
OBJCOPY_x86_32=$(OBJCOPY_x86_32) \
OBJCOPY_x86_64=$(OBJCOPY_x86_64) \
OBJCOPY_arm=$(OBJCOPY_arm) \
OBJCOPY_arm64=$(OBJCOPY_arm64) \
MFLAGS= MAKEFLAGS=
# FILO
filo:
$(MAKE) -C payloads/external/FILO \
HOSTCC="$(HOSTCC)" \
CC="$(CC_x86_32)" LD="$(LD_x86_32)" OBJDUMP="$(OBJDUMP_x86_32)" \
OBJCOPY="$(OBJCOPY_x86_32)" STRIP="$(STRIP_x86_32)" \
CONFIG_FILO_MASTER=$(CONFIG_FILO_MASTER) \
CONFIG_FILO_STABLE=$(CONFIG_FILO_STABLE) \
CONFIG_FILO_USE_AUTOBOOT=$(CONFIG_FILO_USE_AUTOBOOT) \
CONFIG_FILO_AUTOBOOT_FILE=$(CONFIG_FILO_AUTOBOOT_FILE) \
CONFIG_FILO_AUTOBOOT_DELAY=$(CONFIG_FILO_AUTOBOOT_DELAY)
payloads/external/FILO/filo/build/filo.elf: filo
payloads/external/FILO/filo/.config: filo
payloads/external/FILO/filo/build/version.h: filo
# Grub
GRUB_TARGET_PATH=payloads/external/GRUB2/grub2/build/default_payload.elf
cbfs-files-$(CONFIG_GRUB2_SECONDARY_PAYLOAD) += img/grub2
img/grub2-file := $(GRUB_TARGET_PATH)
img/grub2-type := payload
img/grub2-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
grub2: $(obj)/config.h
$(MAKE) -C payloads/external/GRUB2 \
HOSTCC="$(HOSTCC)" \
CC="$(CC_x86_32)" LD="$(LD_x86_32)" \
OBJCOPY="$(OBJCOPY_x86_32)" STRIP="$(STRIP_x86_32)" \
CONFIG_DEP="$(abspath $(obj)/config.h)" \
CONFIG_GRUB2_STABLE=$(CONFIG_GRUB2_STABLE) \
CONFIG_GRUB2_MASTER=$(CONFIG_GRUB2_MASTER) \
CONFIG_GRUB2_REVISION=$(CONFIG_GRUB2_REVISION) \
CONFIG_GRUB2_REVISION_ID=$(CONFIG_GRUB2_REVISION_ID) \
CONFIG_GRUB2_EXTRA_MODULES=$(CONFIG_GRUB2_EXTRA_MODULES)
$(GRUB_TARGET_PATH): grub2
# U-Boot
payloads/external/U-Boot/build/u-boot.bin u-boot: $(DOTCONFIG)
$(MAKE) -C payloads/external/U-Boot \
STABLE_COMMIT_ID=$(CONFIG_UBOOT_STABLE_COMMIT_ID) \
CONFIG_UBOOT_MASTER=$(CONFIG_UBOOT_MASTER) \
CONFIG_UBOOT_STABLE=$(CONFIG_UBOOT_STABLE)
# TINT
payloads/external/tint/tint/tint.elf tint:
$(MAKE) -C payloads/external/tint
cbfs-files-$(CONFIG_TINT_SECONDARY_PAYLOAD) += img/tint
img/tint-file := payloads/external/tint/tint/tint.elf
img/tint-type := payload
img/tint-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
# Memtest86+
ifeq ($(CONFIG_MEMTEST86PLUS_V6),y)
memtest_dir:=memtest86plus_v6
else
memtest_dir:=memtest86plus_v5
endif
cbfs-files-$(CONFIG_MEMTEST_SECONDARY_PAYLOAD) += img/memtest
img/memtest-file := payloads/external/Memtest86Plus/$(memtest_dir)/memtest
img/memtest-type := payload
img/memtest-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
ifeq ($(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO),yy)
MEMTEST_SERIAL_OPTIONS=SERIAL_CONSOLE_DEFAULT=1 \
SERIAL_TTY=$(CONFIG_UART_FOR_CONSOLE) \
SERIAL_BAUD_RATE=$(CONFIG_TTYS0_BAUD)
endif
payloads/external/Memtest86Plus/$(memtest_dir)/memtest: $(DOTCONFIG)
$(MAKE) -C payloads/external/Memtest86Plus all \
CC="$(CC_x86_32)" \
LD="$(LD_x86_32)" \
OBJCOPY="$(OBJCOPY_x86_32)" \
AS="$(AS_x86_32)" \
CONFIG_MEMTEST_REVISION=$(CONFIG_MEMTEST_REVISION) \
CONFIG_MEMTEST_REVISION_ID=$(CONFIG_MEMTEST_REVISION_ID) \
CONFIG_MEMTEST_MAIN=$(CONFIG_MEMTEST_MAIN) \
CONFIG_MEMTEST_STABLE=$(CONFIG_MEMTEST_STABLE) \
CONFIG_MEMTEST86PLUS_V5=$(CONFIG_MEMTEST86PLUS_V5) \
CONFIG_MEMTEST86PLUS_V6=$(CONFIG_MEMTEST86PLUS_V6) \
$(MEMTEST_SERIAL_OPTIONS) \
MFLAGS= MAKEFLAGS=
# iPXE
PXE_ROM_PCI_ID:=$(subst $(comma),,$(CONFIG_PXE_ROM_ID))
ifeq ($(CONFIG_PXE_ROM),y)
PXE_ROM_FILE:=$(call strip_quotes,$(CONFIG_PXE_ROM_FILE))
endif
ifeq ($(CONFIG_BUILD_IPXE),y)
PXE_ROM_FILE:=payloads/external/iPXE/ipxe/ipxe.rom
endif
ifeq ($(CONFIG_IPXE_ADD_SCRIPT),y)
IPXE_CONFIG_SCRIPT:=$(abspath $(patsubst "%",%,$(CONFIG_IPXE_SCRIPT)))
endif
ifeq ($(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO),yy)
IPXE_UART=COM$(call int-add,$(CONFIG_UART_FOR_CONSOLE) 1)
endif
ifeq ($(CONFIG_IPXE_SERIAL_CONSOLE),y)
IPXE_SERIAL_CONSOLE = $(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO)
else
IPXE_SERIAL_CONSOLE = n
endif
cbfs-files-$(CONFIG_PXE_ROM)$(CONFIG_BUILD_IPXE) += pci$(CONFIG_PXE_ROM_ID).rom
pci$(CONFIG_PXE_ROM_ID).rom-file := $(PXE_ROM_FILE)
pci$(CONFIG_PXE_ROM_ID).rom-type := raw
payloads/external/iPXE/ipxe/ipxe.rom ipxe: $(DOTCONFIG) $(IPXE_CONFIG_SCRIPT)
$(MAKE) -C payloads/external/iPXE all \
CROSS_COMPILE="$(CROSS_COMPILE_$(ARCH-ramstage-y))" \
PXE_ROM_PCI_ID=$(PXE_ROM_PCI_ID) \
CONFIG_IPXE_MASTER=$(CONFIG_IPXE_MASTER) \
CONFIG_IPXE_STABLE=$(CONFIG_IPXE_STABLE) \
CONSOLE_SERIAL=$(IPXE_SERIAL_CONSOLE) \
IPXE_UART=$(IPXE_UART) \
CONFIG_TTYS0_BAUD=$(CONFIG_TTYS0_BAUD) \
CONFIG_SCRIPT=$(IPXE_CONFIG_SCRIPT) \
CONFIG_HAS_SCRIPT=$(CONFIG_IPXE_ADD_SCRIPT) \
CONFIG_IPXE_NO_PROMPT=$(CONFIG_IPXE_NO_PROMPT) \
CONFIG_IPXE_HAS_HTTPS=$(CONFIG_IPXE_HAS_HTTPS) \
CONFIG_PXE_TRUST_CMD=$(CONFIG_PXE_TRUST_CMD) \
MFLAGS= MAKEFLAGS=
# LinuxBoot
LINUXBOOT_CROSS_COMPILE_ARCH-$(CONFIG_LINUXBOOT_X86) = x86_32
LINUXBOOT_CROSS_COMPILE_ARCH-$(CONFIG_LINUXBOOT_X86_64) = x86_64
LINUXBOOT_CROSS_COMPILE_ARCH-$(CONFIG_LINUXBOOT_ARM) = arm
LINUXBOOT_CROSS_COMPILE_ARCH-$(CONFIG_LINUXBOOT_ARM64) = arm64
LINUXBOOT_CROSS_COMPILE_ARCH-$(CONFIG_LINUXBOOT_RISCV_RV32) = riscv
LINUXBOOT_CROSS_COMPILE_ARCH-$(CONFIG_LINUXBOOT_RISCV_RV64) = riscv
ifeq ($(CONFIG_LINUXBOOT_CROSS_COMPILE),"")
CONFIG_LINUXBOOT_CROSS_COMPILE=$(CROSS_COMPILE_$(LINUXBOOT_CROSS_COMPILE_ARCH-y))
endif
.PHONY: linuxboot
payloads/external/LinuxBoot/build/Image linuxboot:
$(MAKE) -C payloads/external/LinuxBoot \
CPUS=$(CPUS) \
CONFIG_LINUXBOOT_X86_64=$(CONFIG_LINUXBOOT_X86_64) \
CONFIG_LINUXBOOT_X86=$(CONFIG_LINUXBOOT_X86) \
CONFIG_LINUXBOOT_ARM=$(CONFIG_LINUXBOOT_ARM) \
CONFIG_LINUXBOOT_ARM64=$(CONFIG_LINUXBOOT_ARM64) \
CONFIG_LINUXBOOT_RISCV_RV32=$(CONFIG_LINUXBOOT_RISCV_RV32) \
CONFIG_LINUXBOOT_RISCV_RV64=$(CONFIG_LINUXBOOT_RISCV_RV64) \
CONFIG_LINUXBOOT_CROSS_COMPILE=$(CONFIG_LINUXBOOT_CROSS_COMPILE) \
CONFIG_LINUXBOOT_BUILD_INITRAMFS=$(CONFIG_LINUXBOOT_BUILD_INITRAMFS) \
CONFIG_LINUXBOOT_INITRAMFS_PATH=$(CONFIG_LINUXBOOT_INITRAMFS_PATH) \
CONFIG_LINUXBOOT_INITRAMFS_SUFFIX=$(CONFIG_LINUXBOOT_INITRAMFS_SUFFIX) \
CONFIG_LINUXBOOT_INITRAMFS_COMPRESSION_XZ=$(CONFIG_LINUXBOOT_INITRAMFS_COMPRESSION_XZ) \
CONFIG_LINUXBOOT_COMPILE_KERNEL=$(CONFIG_LINUXBOOT_COMPILE_KERNEL) \
CONFIG_LINUXBOOT_KERNEL_PATH=$(CONFIG_LINUXBOOT_KERNEL_PATH) \
CONFIG_LINUXBOOT_KERNEL_VERSION=$(CONFIG_LINUXBOOT_KERNEL_VERSION) \
CONFIG_LINUXBOOT_KERNEL_BZIMAGE=$(CONFIG_LINUXBOOT_KERNEL_BZIMAGE) \
CONFIG_LINUXBOOT_KERNEL_UIMAGE=$(CONFIG_LINUXBOOT_KERNEL_UIMAGE) \
CONFIG_LINUXBOOT_KERNEL_CONFIGFILE=$(CONFIG_LINUXBOOT_KERNEL_CONFIGFILE) \
CONFIG_LINUXBOOT_UROOT=$(CONFIG_LINUXBOOT_UROOT) \
CONFIG_LINUXBOOT_UROOT_VERSION=$(CONFIG_LINUXBOOT_UROOT_VERSION) \
CONFIG_LINUXBOOT_UROOT_FORMAT=$(CONFIG_LINUXBOOT_UROOT_FORMAT) \
CONFIG_LINUXBOOT_UROOT_INITCMD=$(CONFIG_LINUXBOOT_UROOT_INITCMD) \
CONFIG_LINUXBOOT_UROOT_UINITCMD=$(CONFIG_LINUXBOOT_UROOT_UINITCMD) \
CONFIG_LINUXBOOT_UROOT_SHELL=$(CONFIG_LINUXBOOT_UROOT_SHELL) \
CONFIG_LINUXBOOT_UROOT_COMMANDS=$(CONFIG_LINUXBOOT_UROOT_COMMANDS) \
CONFIG_LINUXBOOT_UROOT_FILES=$(CONFIG_LINUXBOOT_UROOT_FILES) \
CONFIG_LINUXBOOT_DTS_FILE=$(CONFIG_LINUXBOOT_DTS_FILE)
# BOOTBOOT
payloads/external/BOOTBOOT/bootboot/dist/bootbootcb.elf:
$(MAKE) -C payloads/external/BOOTBOOT all
# skiboot
payloads/external/skiboot/build/skiboot.elf:
$(MAKE) -C payloads/external/skiboot all \
CONFIG_SKIBOOT_GIT_REPO=$(CONFIG_SKIBOOT_GIT_REPO) \
CONFIG_SKIBOOT_REVISION=$(CONFIG_SKIBOOT_REVISION)
# leanefi
payloads/external/leanefi/leanefi/build/leanefi.elf: FORCE $(DOTCONFIG)
$(MAKE) -C payloads/external/leanefi
FORCE: ;
# COREDOOM
payloads/external/coreDOOM/coredoom/doomgeneric/coredoom.elf coredoom:
$(MAKE) -C payloads/external/coreDOOM
cbfs-files-$(CONFIG_COREDOOM_SECONDARY_PAYLOAD) += img/coreDOOM
img/coreDOOM-file := payloads/external/coreDOOM/coredoom/doomgeneric/coredoom.elf
img/coreDOOM-type := payload
img/coreDOOM-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
# WAD file
ifneq ($(strip $(CONFIG_COREDOOM_WAD_FILE)),)
cbfs-files-y += doom.wad
doom.wad-file := $(strip $(CONFIG_COREDOOM_WAD_FILE))
doom.wad-type := raw
doom.wad-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
endif
Reference in New Issue View Git Blame Copy Permalink