sravan/system76-coreboot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
f5116952bb77ac361ad541dea00d9df28067219e
system76-coreboot/src/mainboard/google/glados/devicetree.cb
Duncan Laurie f5116952bb soc/intel/skylake: Limit xDCI feature when VBOOT is enabled 
Use the common xDCI function to check if the controller is allowed
in the current mode before enabling it.  Otherwise, disable the
PCI device if it has been enabled in devicetree.

To make the SOC behavior consistent the XdciEnable config option
is removed in favor of direct control by devicetree.cb and the
mainboards that had defined it were adjusted accordingly.

This was tested on an Eve board with xDCI enabled in devicetree.cb
to ensure the xDCI device is enabled in developer mode and disabled
in normal mode.

Change-Id: Ic3c84beac87452f17490de32082030880834501d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/25365
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-28 22:52:38 +00:00

304 lines
10 KiB
Plaintext
Raw Blame History

chip soc/intel/skylake
# Enable deep Sx states
register "deep_s3_enable_ac" = "0"
register "deep_s3_enable_dc" = "0"
register "deep_s5_enable_ac" = "1"
register "deep_s5_enable_dc" = "1"
register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route. i.e. If this route changes then the affected GPE
# offset bits also need to be changed.
register "gpe0_dw0" = "GPP_B"
register "gpe0_dw1" = "GPP_D"
register "gpe0_dw2" = "GPP_E"
# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
register "gen1_dec" = "0x00fc0801"
register "gen2_dec" = "0x000c0201"
# Enable "Intel Speed Shift Technology"
register "speed_shift_enable" = "1"
# Enable DPTF
register "dptf_enable" = "1"
# FSP Configuration
register "ProbelessTrace" = "0"
register "EnableLan" = "0"
register "EnableSata" = "0"
register "SataSalpSupport" = "0"
register "SataMode" = "0"
register "SataPortsEnable[0]" = "0"
register "EnableAzalia" = "1"
register "DspEnable" = "1"
register "IoBufferOwnership" = "3"
register "EnableTraceHub" = "0"
register "SsicPortEnable" = "0"
register "SmbusEnable" = "1"
register "Cio2Enable" = "0"
register "ScsEmmcEnabled" = "1"
register "ScsEmmcHs400Enabled" = "1"
register "ScsSdCardEnabled" = "2"
register "IshEnable" = "0"
register "PttSwitch" = "0"
register "InternalGfx" = "1"
register "SkipExtGfxScan" = "1"
register "Device4Enable" = "1"
register "HeciEnabled" = "0"
register "FspSkipMpInit" = "1"
register "SaGv" = "3"
register "SerialIrqConfigSirqEnable" = "1"
register "PmConfigSlpS3MinAssert" = "2" # 50ms
register "PmConfigSlpS4MinAssert" = "1" # 1s
register "PmConfigSlpSusMinAssert" = "1" # 500ms
register "PmConfigSlpAMinAssert" = "3" # 2s
register "PmTimerDisabled" = "1"
register "pirqa_routing" = "PCH_IRQ11"
register "pirqb_routing" = "PCH_IRQ10"
register "pirqc_routing" = "PCH_IRQ11"
register "pirqd_routing" = "PCH_IRQ11"
register "pirqe_routing" = "PCH_IRQ11"
register "pirqf_routing" = "PCH_IRQ11"
register "pirqg_routing" = "PCH_IRQ11"
register "pirqh_routing" = "PCH_IRQ11"
# VR Settings Configuration for 5 Domains
#+----------------+-------+-------+-------------+-------------+-------+
#| Domain/Setting | SA | IA | Ring Sliced | GT Unsliced | GT |
#+----------------+-------+-------+-------------+-------------+-------+
#| Psi1Threshold | 20A | 20A | 20A | 20A | 20A |
#| Psi2Threshold | 4A | 5A | 5A | 5A | 5A |
#| Psi3Threshold | 1A | 1A | 1A | 1A | 1A |
#| Psi3Enable | 1 | 1 | 1 | 1 | 1 |
#| Psi4Enable | 1 | 1 | 1 | 1 | 1 |
#| ImonSlope | 0 | 0 | 0 | 0 | 0 |
#| ImonOffset | 0 | 0 | 0 | 0 | 0 |
#| IccMax | 7A | 34A | 34A | 35A | 35A |
#| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | 1.52V |
#+----------------+-------+-------+-------------+-------------+-------+
register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(4),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0x0,
.imon_offset = 0x0,
.icc_max = VR_CFG_AMP(7),
.voltage_limit = 1520,
}"
register "domain_vr_config[VR_IA_CORE]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(5),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0x0,
.imon_offset = 0x0,
.icc_max = VR_CFG_AMP(34),
.voltage_limit = 1520,
}"
register "domain_vr_config[VR_RING]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(5),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0x0,
.imon_offset = 0x0,
.icc_max = VR_CFG_AMP(34),
.voltage_limit = 1520,
}"
register "domain_vr_config[VR_GT_UNSLICED]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(5),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0x0,
.imon_offset = 0x0,
.icc_max = VR_CFG_AMP(35),
.voltage_limit = 1520,
}"
register "domain_vr_config[VR_GT_SLICED]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(5),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0x0,
.imon_offset = 0x0,
.icc_max = VR_CFG_AMP(35),
.voltage_limit = 1520,
}"
# Enable Root port 1.
register "PcieRpEnable[0]" = "1"
# Enable CLKREQ#
register "PcieRpClkReqSupport[0]" = "1"
# RP 1 uses SRCCLKREQ1#
register "PcieRpClkReqNumber[0]" = "1"
register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC2)" # Type-C Port (board)
register "usb2_ports[1]" = "USB2_PORT_MAX(OC3)" # Type-C Port (flex)
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-A Port 1
register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
register "usb2_ports[8]" = "USB2_PORT_MID(OC1)" # Type-A Port 2
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port (board)
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-C Port (flex)
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 1
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 2
register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" # I2C4 is 1.8V
# Must leave UART0 enabled or SD/eMMC will not work as PCI
register "SerialIoDevMode" = "{
[PchSerialIoIndexI2C0] = PchSerialIoPci,
[PchSerialIoIndexI2C1] = PchSerialIoPci,
[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
[PchSerialIoIndexI2C3] = PchSerialIoDisabled,
[PchSerialIoIndexI2C4] = PchSerialIoPci,
[PchSerialIoIndexI2C5] = PchSerialIoDisabled,
[PchSerialIoIndexSpi0] = PchSerialIoDisabled,
[PchSerialIoIndexSpi1] = PchSerialIoDisabled,
[PchSerialIoIndexUart0] = PchSerialIoPci,
[PchSerialIoIndexUart1] = PchSerialIoDisabled,
[PchSerialIoIndexUart2] = PchSerialIoPci,
}"
# PL2 override 15W
register "tdp_pl2_override" = "15"
# Send an extra VR mailbox command for the supported MPS IMVP8 model
register "SendVrMbxCmd" = "1"
# Lock Down
register "chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT"
device cpu_cluster 0 on
device lapic 0 on end
end
device domain 0 on
device pci 00.0 on end # Host Bridge
device pci 02.0 on end # Integrated Graphics Device
device pci 14.0 on end # USB xHCI
device pci 14.1 off end # USB xDCI (OTG)
device pci 14.2 on end # Thermal Subsystem
device pci 15.0 on
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
device i2c 10 on end
end
end # I2C #0
device pci 15.1 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_05"
device i2c 15 on end
end
end # I2C #1
device pci 15.2 off end # I2C #2
device pci 15.3 off end # I2C #3
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
device pci 16.3 off end # Management Engine KT Redirection
device pci 16.4 off end # Management Engine Interface 3
device pci 17.0 off end # SATA
device pci 19.0 on end # UART #2
device pci 19.1 off end # I2C #5
device pci 19.2 on
chip drivers/i2c/nau8825
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
register "jkdet_enable" = "1"
register "jkdet_pull_enable" = "0" # R389
register "jkdet_polarity" = "1" # ActiveLow
register "vref_impedance" = "2" # 125kOhm
register "micbias_voltage" = "6" # 2.754
register "sar_threshold_num" = "4"
register "sar_threshold[0]" = "0x0c"
register "sar_threshold[1]" = "0x1e"
register "sar_threshold[2]" = "0x38"
register "sar_threshold[3]" = "0x60"
register "sar_hysteresis" = "1"
register "sar_voltage" = "0" # VDDA
register "sar_compare_time" = "0" # 500ns
register "sar_sampling_time" = "0" # 2us
register "short_key_debounce" = "2" # 100ms
register "jack_insert_debounce" = "7" # 512ms
register "jack_eject_debounce" = "7" # 512ms
device i2c 1a on end
end
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "desc" = ""SSM4567 Left Speaker Amp""
register "uid" = "0"
device i2c 34 on end
end
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "desc" = ""SSM4567 Right Speaker Amp""
register "uid" = "1"
device i2c 35 on end
end
end # I2C #4
device pci 1c.0 on
chip drivers/intel/wifi
register "wake" = "GPE0_DW0_16"
device pci 00.0 on end
end
end # PCI Express Port 1
device pci 1c.1 off end # PCI Express Port 2
device pci 1c.2 off end # PCI Express Port 3
device pci 1c.3 off end # PCI Express Port 4
device pci 1c.4 off end # PCI Express Port 5
device pci 1c.5 off end # PCI Express Port 6
device pci 1c.6 off end # PCI Express Port 7
device pci 1c.7 off end # PCI Express Port 8
device pci 1d.0 off end # PCI Express Port 9
device pci 1d.1 off end # PCI Express Port 10
device pci 1d.2 off end # PCI Express Port 11
device pci 1d.3 off end # PCI Express Port 12
device pci 1e.0 on end # UART #0
device pci 1e.1 off end # UART #1
device pci 1e.2 off end # GSPI #0
device pci 1e.3 off end # GSPI #1
device pci 1e.4 on end # eMMC
device pci 1e.5 off end # SDIO
device pci 1e.6 on end # SDCard
device pci 1f.0 on
chip drivers/pc80/tpm
device pnp 0c31.0 on end
end
chip ec/google/chromeec
device pnp 0c09.0 on end
end
end # LPC Interface
device pci 1f.1 on end # P2SB
device pci 1f.2 on end # Power Management Controller
device pci 1f.3 on end # Intel HDA
device pci 1f.4 on end # SMBus
device pci 1f.5 on end # PCH SPI
device pci 1f.6 off end # GbE
end
end
Reference in New Issue View Git Blame Copy Permalink