diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/F86GuidedSectionExtraction.c b/MdeModulePkg/Library/LzmaCustomDecompressLib/F86GuidedSectionExtraction.c
new file mode 100644
index 0000000000..ada9a809fa
--- /dev/null
+++ b/MdeModulePkg/Library/LzmaCustomDecompressLib/F86GuidedSectionExtraction.c
@@ -0,0 +1,218 @@
+/** @file
+ LZMA Decompress GUIDed Section Extraction Library, which produces LZMA custom
+ decompression algorithm with the converter for the different arch code.
+ It wraps Lzma decompress interfaces to GUIDed Section Extraction interfaces
+ and registers them into GUIDed handler table.
+
+ Copyright (c) 2012, Intel Corporation. All rights reserved.
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "LzmaDecompressLibInternal.h"
+#include "Sdk/C/Bra.h"
+
+/**
+ Examines a GUIDed section and returns the size of the decoded buffer and the
+ size of an scratch buffer required to actually decode the data in a GUIDed section.
+
+ Examines a GUIDed section specified by InputSection.
+ If GUID for InputSection does not match the GUID that this handler supports,
+ then RETURN_UNSUPPORTED is returned.
+ If the required information can not be retrieved from InputSection,
+ then RETURN_INVALID_PARAMETER is returned.
+ If the GUID of InputSection does match the GUID that this handler supports,
+ then the size required to hold the decoded buffer is returned in OututBufferSize,
+ the size of an optional scratch buffer is returned in ScratchSize, and the Attributes field
+ from EFI_GUID_DEFINED_SECTION header of InputSection is returned in SectionAttribute.
+
+ If InputSection is NULL, then ASSERT().
+ If OutputBufferSize is NULL, then ASSERT().
+ If ScratchBufferSize is NULL, then ASSERT().
+ If SectionAttribute is NULL, then ASSERT().
+
+
+ @param[in] InputSection A pointer to a GUIDed section of an FFS formatted file.
+ @param[out] OutputBufferSize A pointer to the size, in bytes, of an output buffer required
+ if the buffer specified by InputSection were decoded.
+ @param[out] ScratchBufferSize A pointer to the size, in bytes, required as scratch space
+ if the buffer specified by InputSection were decoded.
+ @param[out] SectionAttribute A pointer to the attributes of the GUIDed section. See the Attributes
+ field of EFI_GUID_DEFINED_SECTION in the PI Specification.
+
+ @retval RETURN_SUCCESS The information about InputSection was returned.
+ @retval RETURN_UNSUPPORTED The section specified by InputSection does not match the GUID this handler supports.
+ @retval RETURN_INVALID_PARAMETER The information can not be retrieved from the section specified by InputSection.
+
+**/
+RETURN_STATUS
+EFIAPI
+LzmaArchGuidedSectionGetInfo (
+ IN CONST VOID *InputSection,
+ OUT UINT32 *OutputBufferSize,
+ OUT UINT32 *ScratchBufferSize,
+ OUT UINT16 *SectionAttribute
+ )
+{
+ ASSERT (InputSection != NULL);
+ ASSERT (OutputBufferSize != NULL);
+ ASSERT (ScratchBufferSize != NULL);
+ ASSERT (SectionAttribute != NULL);
+
+ if (IS_SECTION2 (InputSection)) {
+ if (!CompareGuid (
+ &gLzmaF86CustomDecompressGuid,
+ &(((EFI_GUID_DEFINED_SECTION2 *) InputSection)->SectionDefinitionGuid))) {
+ return RETURN_INVALID_PARAMETER;
+ }
+
+ *SectionAttribute = ((EFI_GUID_DEFINED_SECTION2 *) InputSection)->Attributes;
+
+ return LzmaUefiDecompressGetInfo (
+ (UINT8 *) InputSection + ((EFI_GUID_DEFINED_SECTION2 *) InputSection)->DataOffset,
+ SECTION2_SIZE (InputSection) - ((EFI_GUID_DEFINED_SECTION2 *) InputSection)->DataOffset,
+ OutputBufferSize,
+ ScratchBufferSize
+ );
+ } else {
+ if (!CompareGuid (
+ &gLzmaF86CustomDecompressGuid,
+ &(((EFI_GUID_DEFINED_SECTION *) InputSection)->SectionDefinitionGuid))) {
+ return RETURN_INVALID_PARAMETER;
+ }
+
+ *SectionAttribute = ((EFI_GUID_DEFINED_SECTION *) InputSection)->Attributes;
+
+ return LzmaUefiDecompressGetInfo (
+ (UINT8 *) InputSection + ((EFI_GUID_DEFINED_SECTION *) InputSection)->DataOffset,
+ SECTION_SIZE (InputSection) - ((EFI_GUID_DEFINED_SECTION *) InputSection)->DataOffset,
+ OutputBufferSize,
+ ScratchBufferSize
+ );
+ }
+}
+
+/**
+ Decompress a LZAM compressed GUIDed section into a caller allocated output buffer.
+
+ Decodes the GUIDed section specified by InputSection.
+ If GUID for InputSection does not match the GUID that this handler supports, then RETURN_UNSUPPORTED is returned.
+ If the data in InputSection can not be decoded, then RETURN_INVALID_PARAMETER is returned.
+ If the GUID of InputSection does match the GUID that this handler supports, then InputSection
+ is decoded into the buffer specified by OutputBuffer and the authentication status of this
+ decode operation is returned in AuthenticationStatus. If the decoded buffer is identical to the
+ data in InputSection, then OutputBuffer is set to point at the data in InputSection. Otherwise,
+ the decoded data will be placed in caller allocated buffer specified by OutputBuffer.
+
+ If InputSection is NULL, then ASSERT().
+ If OutputBuffer is NULL, then ASSERT().
+ If ScratchBuffer is NULL and this decode operation requires a scratch buffer, then ASSERT().
+ If AuthenticationStatus is NULL, then ASSERT().
+
+
+ @param[in] InputSection A pointer to a GUIDed section of an FFS formatted file.
+ @param[out] OutputBuffer A pointer to a buffer that contains the result of a decode operation.
+ @param[out] ScratchBuffer A caller allocated buffer that may be required by this function
+ as a scratch buffer to perform the decode operation.
+ @param[out] AuthenticationStatus
+ A pointer to the authentication status of the decoded output buffer.
+ See the definition of authentication status in the EFI_PEI_GUIDED_SECTION_EXTRACTION_PPI
+ section of the PI Specification. EFI_AUTH_STATUS_PLATFORM_OVERRIDE must
+ never be set by this handler.
+
+ @retval RETURN_SUCCESS The buffer specified by InputSection was decoded.
+ @retval RETURN_UNSUPPORTED The section specified by InputSection does not match the GUID this handler supports.
+ @retval RETURN_INVALID_PARAMETER The section specified by InputSection can not be decoded.
+
+**/
+RETURN_STATUS
+EFIAPI
+LzmaArchGuidedSectionExtraction (
+ IN CONST VOID *InputSection,
+ OUT VOID **OutputBuffer,
+ OUT VOID *ScratchBuffer, OPTIONAL
+ OUT UINT32 *AuthenticationStatus
+ )
+{
+ EFI_GUID *InputGuid;
+ VOID *Source;
+ UINTN SourceSize;
+ EFI_STATUS Status;
+ UINT32 X86State;
+ UINT32 OutputBufferSize;
+ UINT32 ScratchBufferSize;
+
+ ASSERT (OutputBuffer != NULL);
+ ASSERT (InputSection != NULL);
+
+ if (IS_SECTION2 (InputSection)) {
+ InputGuid = &(((EFI_GUID_DEFINED_SECTION2 *) InputSection)->SectionDefinitionGuid);
+ Source = (UINT8 *) InputSection + ((EFI_GUID_DEFINED_SECTION2 *) InputSection)->DataOffset;
+ SourceSize = SECTION2_SIZE (InputSection) - ((EFI_GUID_DEFINED_SECTION2 *) InputSection)->DataOffset;
+ } else {
+ InputGuid = &(((EFI_GUID_DEFINED_SECTION *) InputSection)->SectionDefinitionGuid);
+ Source = (UINT8 *) InputSection + ((EFI_GUID_DEFINED_SECTION *) InputSection)->DataOffset;
+ SourceSize = SECTION_SIZE (InputSection) - ((EFI_GUID_DEFINED_SECTION *) InputSection)->DataOffset;
+ }
+
+ if (!CompareGuid (&gLzmaF86CustomDecompressGuid, InputGuid)) {
+ return RETURN_INVALID_PARAMETER;
+ }
+
+ //
+ // Authentication is set to Zero, which may be ignored.
+ //
+ *AuthenticationStatus = 0;
+
+ Status = LzmaUefiDecompress (
+ Source,
+ SourceSize,
+ *OutputBuffer,
+ ScratchBuffer
+ );
+
+ //
+ // After decompress, the data need to be converted to the raw data.
+ //
+ if (!EFI_ERROR (Status)) {
+ Status = LzmaUefiDecompressGetInfo (
+ Source,
+ (UINT32) SourceSize,
+ &OutputBufferSize,
+ &ScratchBufferSize
+ );
+
+ if (!EFI_ERROR (Status)) {
+ x86_Convert_Init(X86State);
+ x86_Convert(*OutputBuffer, OutputBufferSize, 0, &X86State, 0);
+ }
+ }
+
+ return Status;
+}
+
+
+/**
+ Register LzmaArchDecompress and LzmaArchDecompressGetInfo handlers with LzmaF86CustomDecompressGuid.
+
+ @retval RETURN_SUCCESS Register successfully.
+ @retval RETURN_OUT_OF_RESOURCES No enough memory to store this handler.
+**/
+EFI_STATUS
+EFIAPI
+LzmaArchDecompressLibConstructor (
+ )
+{
+ return ExtractGuidedSectionRegisterHandlers (
+ &gLzmaF86CustomDecompressGuid,
+ LzmaArchGuidedSectionGetInfo,
+ LzmaArchGuidedSectionExtraction
+ );
+}
+
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/GuidedSectionExtraction.c b/MdeModulePkg/Library/LzmaCustomDecompressLib/GuidedSectionExtraction.c
new file mode 100644
index 0000000000..f19e0d28cd
--- /dev/null
+++ b/MdeModulePkg/Library/LzmaCustomDecompressLib/GuidedSectionExtraction.c
@@ -0,0 +1,201 @@
+/** @file
+ LZMA Decompress GUIDed Section Extraction Library.
+ It wraps Lzma decompress interfaces to GUIDed Section Extraction interfaces
+ and registers them into GUIDed handler table.
+
+ Copyright (c) 2009 - 2011, Intel Corporation. All rights reserved.
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "LzmaDecompressLibInternal.h"
+
+/**
+ Examines a GUIDed section and returns the size of the decoded buffer and the
+ size of an scratch buffer required to actually decode the data in a GUIDed section.
+
+ Examines a GUIDed section specified by InputSection.
+ If GUID for InputSection does not match the GUID that this handler supports,
+ then RETURN_UNSUPPORTED is returned.
+ If the required information can not be retrieved from InputSection,
+ then RETURN_INVALID_PARAMETER is returned.
+ If the GUID of InputSection does match the GUID that this handler supports,
+ then the size required to hold the decoded buffer is returned in OututBufferSize,
+ the size of an optional scratch buffer is returned in ScratchSize, and the Attributes field
+ from EFI_GUID_DEFINED_SECTION header of InputSection is returned in SectionAttribute.
+
+ If InputSection is NULL, then ASSERT().
+ If OutputBufferSize is NULL, then ASSERT().
+ If ScratchBufferSize is NULL, then ASSERT().
+ If SectionAttribute is NULL, then ASSERT().
+
+
+ @param[in] InputSection A pointer to a GUIDed section of an FFS formatted file.
+ @param[out] OutputBufferSize A pointer to the size, in bytes, of an output buffer required
+ if the buffer specified by InputSection were decoded.
+ @param[out] ScratchBufferSize A pointer to the size, in bytes, required as scratch space
+ if the buffer specified by InputSection were decoded.
+ @param[out] SectionAttribute A pointer to the attributes of the GUIDed section. See the Attributes
+ field of EFI_GUID_DEFINED_SECTION in the PI Specification.
+
+ @retval RETURN_SUCCESS The information about InputSection was returned.
+ @retval RETURN_UNSUPPORTED The section specified by InputSection does not match the GUID this handler supports.
+ @retval RETURN_INVALID_PARAMETER The information can not be retrieved from the section specified by InputSection.
+
+**/
+RETURN_STATUS
+EFIAPI
+LzmaGuidedSectionGetInfo (
+ IN CONST VOID *InputSection,
+ OUT UINT32 *OutputBufferSize,
+ OUT UINT32 *ScratchBufferSize,
+ OUT UINT16 *SectionAttribute
+ )
+{
+ ASSERT (InputSection != NULL);
+ ASSERT (OutputBufferSize != NULL);
+ ASSERT (ScratchBufferSize != NULL);
+ ASSERT (SectionAttribute != NULL);
+
+ if (IS_SECTION2 (InputSection)) {
+ if (!CompareGuid (
+ &gLzmaCustomDecompressGuid,
+ &(((EFI_GUID_DEFINED_SECTION2 *) InputSection)->SectionDefinitionGuid))) {
+ return RETURN_INVALID_PARAMETER;
+ }
+
+ *SectionAttribute = ((EFI_GUID_DEFINED_SECTION2 *) InputSection)->Attributes;
+
+ return LzmaUefiDecompressGetInfo (
+ (UINT8 *) InputSection + ((EFI_GUID_DEFINED_SECTION2 *) InputSection)->DataOffset,
+ SECTION2_SIZE (InputSection) - ((EFI_GUID_DEFINED_SECTION2 *) InputSection)->DataOffset,
+ OutputBufferSize,
+ ScratchBufferSize
+ );
+ } else {
+ if (!CompareGuid (
+ &gLzmaCustomDecompressGuid,
+ &(((EFI_GUID_DEFINED_SECTION *) InputSection)->SectionDefinitionGuid))) {
+ return RETURN_INVALID_PARAMETER;
+ }
+
+ *SectionAttribute = ((EFI_GUID_DEFINED_SECTION *) InputSection)->Attributes;
+
+ return LzmaUefiDecompressGetInfo (
+ (UINT8 *) InputSection + ((EFI_GUID_DEFINED_SECTION *) InputSection)->DataOffset,
+ SECTION_SIZE (InputSection) - ((EFI_GUID_DEFINED_SECTION *) InputSection)->DataOffset,
+ OutputBufferSize,
+ ScratchBufferSize
+ );
+ }
+}
+
+/**
+ Decompress a LZAM compressed GUIDed section into a caller allocated output buffer.
+
+ Decodes the GUIDed section specified by InputSection.
+ If GUID for InputSection does not match the GUID that this handler supports, then RETURN_UNSUPPORTED is returned.
+ If the data in InputSection can not be decoded, then RETURN_INVALID_PARAMETER is returned.
+ If the GUID of InputSection does match the GUID that this handler supports, then InputSection
+ is decoded into the buffer specified by OutputBuffer and the authentication status of this
+ decode operation is returned in AuthenticationStatus. If the decoded buffer is identical to the
+ data in InputSection, then OutputBuffer is set to point at the data in InputSection. Otherwise,
+ the decoded data will be placed in caller allocated buffer specified by OutputBuffer.
+
+ If InputSection is NULL, then ASSERT().
+ If OutputBuffer is NULL, then ASSERT().
+ If ScratchBuffer is NULL and this decode operation requires a scratch buffer, then ASSERT().
+ If AuthenticationStatus is NULL, then ASSERT().
+
+
+ @param[in] InputSection A pointer to a GUIDed section of an FFS formatted file.
+ @param[out] OutputBuffer A pointer to a buffer that contains the result of a decode operation.
+ @param[out] ScratchBuffer A caller allocated buffer that may be required by this function
+ as a scratch buffer to perform the decode operation.
+ @param[out] AuthenticationStatus
+ A pointer to the authentication status of the decoded output buffer.
+ See the definition of authentication status in the EFI_PEI_GUIDED_SECTION_EXTRACTION_PPI
+ section of the PI Specification. EFI_AUTH_STATUS_PLATFORM_OVERRIDE must
+ never be set by this handler.
+
+ @retval RETURN_SUCCESS The buffer specified by InputSection was decoded.
+ @retval RETURN_UNSUPPORTED The section specified by InputSection does not match the GUID this handler supports.
+ @retval RETURN_INVALID_PARAMETER The section specified by InputSection can not be decoded.
+
+**/
+RETURN_STATUS
+EFIAPI
+LzmaGuidedSectionExtraction (
+ IN CONST VOID *InputSection,
+ OUT VOID **OutputBuffer,
+ OUT VOID *ScratchBuffer, OPTIONAL
+ OUT UINT32 *AuthenticationStatus
+ )
+{
+ ASSERT (OutputBuffer != NULL);
+ ASSERT (InputSection != NULL);
+
+ if (IS_SECTION2 (InputSection)) {
+ if (!CompareGuid (
+ &gLzmaCustomDecompressGuid,
+ &(((EFI_GUID_DEFINED_SECTION2 *) InputSection)->SectionDefinitionGuid))) {
+ return RETURN_INVALID_PARAMETER;
+ }
+
+ //
+ // Authentication is set to Zero, which may be ignored.
+ //
+ *AuthenticationStatus = 0;
+
+ return LzmaUefiDecompress (
+ (UINT8 *) InputSection + ((EFI_GUID_DEFINED_SECTION2 *) InputSection)->DataOffset,
+ SECTION2_SIZE (InputSection) - ((EFI_GUID_DEFINED_SECTION2 *) InputSection)->DataOffset,
+ *OutputBuffer,
+ ScratchBuffer
+ );
+ } else {
+ if (!CompareGuid (
+ &gLzmaCustomDecompressGuid,
+ &(((EFI_GUID_DEFINED_SECTION *) InputSection)->SectionDefinitionGuid))) {
+ return RETURN_INVALID_PARAMETER;
+ }
+
+ //
+ // Authentication is set to Zero, which may be ignored.
+ //
+ *AuthenticationStatus = 0;
+
+ return LzmaUefiDecompress (
+ (UINT8 *) InputSection + ((EFI_GUID_DEFINED_SECTION *) InputSection)->DataOffset,
+ SECTION_SIZE (InputSection) - ((EFI_GUID_DEFINED_SECTION *) InputSection)->DataOffset,
+ *OutputBuffer,
+ ScratchBuffer
+ );
+ }
+}
+
+
+/**
+ Register LzmaDecompress and LzmaDecompressGetInfo handlers with LzmaCustomerDecompressGuid.
+
+ @retval RETURN_SUCCESS Register successfully.
+ @retval RETURN_OUT_OF_RESOURCES No enough memory to store this handler.
+**/
+EFI_STATUS
+EFIAPI
+LzmaDecompressLibConstructor (
+ )
+{
+ return ExtractGuidedSectionRegisterHandlers (
+ &gLzmaCustomDecompressGuid,
+ LzmaGuidedSectionGetInfo,
+ LzmaGuidedSectionExtraction
+ );
+}
+
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/LZMA-SDK-README.txt b/MdeModulePkg/Library/LzmaCustomDecompressLib/LZMA-SDK-README.txt
new file mode 100644
index 0000000000..e05b3bb853
--- /dev/null
+++ b/MdeModulePkg/Library/LzmaCustomDecompressLib/LZMA-SDK-README.txt
@@ -0,0 +1,4 @@
+LzmaCustomDecompressLib is based on the LZMA SDK 4.65.
+LZMA SDK 4.65 was placed in the public domain on
+2009-02-03. It was released on the
+http://www.7-zip.org/sdk.html website.
\ No newline at end of file
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaArchCustomDecompressLib.inf b/MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaArchCustomDecompressLib.inf
new file mode 100644
index 0000000000..ec7585d55b
--- /dev/null
+++ b/MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaArchCustomDecompressLib.inf
@@ -0,0 +1,66 @@
+## @file
+# LzmaArchCustomDecompressLib produces LZMA custom decompression algorithm with the converter for the different arch code.
+#
+# It is based on the LZMA SDK 4.65.
+# LZMA SDK 4.65 was placed in the public domain on 2009-02-03.
+# It was released on the http://www.7-zip.org/sdk.html website.
+#
+# Copyright (c) 2012 - 2015, Intel Corporation. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = LzmaArchDecompressLib
+ MODULE_UNI_FILE = LzmaArchDecompressLib.uni
+ FILE_GUID = A853C1D2-E003-4cc4-9DD1-8824AD79FE48
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = NULL
+ CONSTRUCTOR = LzmaArchDecompressLibConstructor
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64
+#
+
+[Sources]
+ LzmaDecompress.c
+ Sdk/C/Bra.h
+ Sdk/C/LzFind.c
+ Sdk/C/LzmaDec.c
+ Sdk/C/7zVersion.h
+ Sdk/C/CpuArch.h
+ Sdk/C/LzFind.h
+ Sdk/C/LzHash.h
+ Sdk/C/LzmaDec.h
+ Sdk/C/Types.h
+ UefiLzma.h
+ LzmaDecompressLibInternal.h
+
+[Sources.Ia32, Sources.X64]
+ Sdk/C/Bra86.c
+ F86GuidedSectionExtraction.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[Guids.Ia32, Guids.X64]
+ gLzmaF86CustomDecompressGuid ## PRODUCES ## GUID # specifies LZMA custom decompress algorithm with converter for x86 code.
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ BaseMemoryLib
+ ExtractGuidedSectionLib
+
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaArchDecompressLib.uni b/MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaArchDecompressLib.uni
new file mode 100644
index 0000000000..1830dae73c
Binary files /dev/null and b/MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaArchDecompressLib.uni differ
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf b/MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
new file mode 100644
index 0000000000..f5624fd039
--- /dev/null
+++ b/MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
@@ -0,0 +1,62 @@
+## @file
+# LzmaCustomDecompressLib produces LZMA custom decompression algorithm.
+#
+# It is based on the LZMA SDK 4.65.
+# LZMA SDK 4.65 was placed in the public domain on 2009-02-03.
+# It was released on the http://www.7-zip.org/sdk.html website.
+#
+# Copyright (c) 2009 - 2015, Intel Corporation. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = LzmaDecompressLib
+ MODULE_UNI_FILE = LzmaDecompressLib.uni
+ FILE_GUID = 35194660-7421-44ad-9636-e44885f092d1
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = NULL
+ CONSTRUCTOR = LzmaDecompressLibConstructor
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC
+#
+
+[Sources]
+ LzmaDecompress.c
+ Sdk/C/LzFind.c
+ Sdk/C/LzmaDec.c
+ Sdk/C/7zVersion.h
+ Sdk/C/CpuArch.h
+ Sdk/C/LzFind.h
+ Sdk/C/LzHash.h
+ Sdk/C/LzmaDec.h
+ Sdk/C/Types.h
+ GuidedSectionExtraction.c
+ UefiLzma.h
+ LzmaDecompressLibInternal.h
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[Guids]
+ gLzmaCustomDecompressGuid ## PRODUCES ## UNDEFINED # specifies LZMA custom decompress algorithm.
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ BaseMemoryLib
+ ExtractGuidedSectionLib
+
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaDecompress.c b/MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaDecompress.c
new file mode 100644
index 0000000000..e32b6a3025
--- /dev/null
+++ b/MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaDecompress.c
@@ -0,0 +1,220 @@
+/** @file
+ LZMA Decompress interfaces
+
+ Copyright (c) 2009 - 2010, Intel Corporation. All rights reserved.
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "LzmaDecompressLibInternal.h"
+#include "Sdk/C/Types.h"
+#include "Sdk/C/7zVersion.h"
+#include "Sdk/C/LzmaDec.h"
+
+#define SCRATCH_BUFFER_REQUEST_SIZE SIZE_64KB
+
+typedef struct
+{
+ ISzAlloc Functions;
+ VOID *Buffer;
+ UINTN BufferSize;
+} ISzAllocWithData;
+
+/**
+ Allocation routine used by LZMA decompression.
+
+ @param P Pointer to the ISzAlloc instance
+ @param Size The size in bytes to be allocated
+
+ @return The allocated pointer address, or NULL on failure
+**/
+VOID *
+SzAlloc (
+ VOID *P,
+ size_t Size
+ )
+{
+ VOID *Addr;
+ ISzAllocWithData *Private;
+
+ Private = (ISzAllocWithData*) P;
+
+ if (Private->BufferSize >= Size) {
+ Addr = Private->Buffer;
+ Private->Buffer = (VOID*) ((UINT8*)Addr + Size);
+ Private->BufferSize -= Size;
+ return Addr;
+ } else {
+ ASSERT (FALSE);
+ return NULL;
+ }
+}
+
+/**
+ Free routine used by LZMA decompression.
+
+ @param P Pointer to the ISzAlloc instance
+ @param Address The address to be freed
+**/
+VOID
+SzFree (
+ VOID *P,
+ VOID *Address
+ )
+{
+ //
+ // We use the 'scratch buffer' for allocations, so there is no free
+ // operation required. The scratch buffer will be freed by the caller
+ // of the decompression code.
+ //
+}
+
+#define LZMA_HEADER_SIZE (LZMA_PROPS_SIZE + 8)
+
+/**
+ Get the size of the uncompressed buffer by parsing EncodeData header.
+
+ @param EncodedData Pointer to the compressed data.
+
+ @return The size of the uncompressed buffer.
+**/
+UINT64
+GetDecodedSizeOfBuf(
+ UINT8 *EncodedData
+ )
+{
+ UINT64 DecodedSize;
+ INTN Index;
+
+ /* Parse header */
+ DecodedSize = 0;
+ for (Index = LZMA_PROPS_SIZE + 7; Index >= LZMA_PROPS_SIZE; Index--)
+ DecodedSize = LShiftU64(DecodedSize, 8) + EncodedData[Index];
+
+ return DecodedSize;
+}
+
+//
+// LZMA functions and data as defined in local LzmaDecompressLibInternal.h
+//
+
+/**
+ Given a Lzma compressed source buffer, this function retrieves the size of
+ the uncompressed buffer and the size of the scratch buffer required
+ to decompress the compressed source buffer.
+
+ Retrieves the size of the uncompressed buffer and the temporary scratch buffer
+ required to decompress the buffer specified by Source and SourceSize.
+ The size of the uncompressed buffer is returned in DestinationSize,
+ the size of the scratch buffer is returned in ScratchSize, and RETURN_SUCCESS is returned.
+ This function does not have scratch buffer available to perform a thorough
+ checking of the validity of the source data. It just retrieves the "Original Size"
+ field from the LZMA_HEADER_SIZE beginning bytes of the source data and output it as DestinationSize.
+ And ScratchSize is specific to the decompression implementation.
+
+ If SourceSize is less than LZMA_HEADER_SIZE, then ASSERT().
+
+ @param Source The source buffer containing the compressed data.
+ @param SourceSize The size, in bytes, of the source buffer.
+ @param DestinationSize A pointer to the size, in bytes, of the uncompressed buffer
+ that will be generated when the compressed buffer specified
+ by Source and SourceSize is decompressed.
+ @param ScratchSize A pointer to the size, in bytes, of the scratch buffer that
+ is required to decompress the compressed buffer specified
+ by Source and SourceSize.
+
+ @retval RETURN_SUCCESS The size of the uncompressed data was returned
+ in DestinationSize and the size of the scratch
+ buffer was returned in ScratchSize.
+
+**/
+RETURN_STATUS
+EFIAPI
+LzmaUefiDecompressGetInfo (
+ IN CONST VOID *Source,
+ IN UINT32 SourceSize,
+ OUT UINT32 *DestinationSize,
+ OUT UINT32 *ScratchSize
+ )
+{
+ UInt64 DecodedSize;
+
+ ASSERT(SourceSize >= LZMA_HEADER_SIZE);
+
+ DecodedSize = GetDecodedSizeOfBuf((UINT8*)Source);
+
+ *DestinationSize = (UINT32)DecodedSize;
+ *ScratchSize = SCRATCH_BUFFER_REQUEST_SIZE;
+ return RETURN_SUCCESS;
+}
+
+/**
+ Decompresses a Lzma compressed source buffer.
+
+ Extracts decompressed data to its original form.
+ If the compressed source data specified by Source is successfully decompressed
+ into Destination, then RETURN_SUCCESS is returned. If the compressed source data
+ specified by Source is not in a valid compressed data format,
+ then RETURN_INVALID_PARAMETER is returned.
+
+ @param Source The source buffer containing the compressed data.
+ @param SourceSize The size of source buffer.
+ @param Destination The destination buffer to store the decompressed data
+ @param Scratch A temporary scratch buffer that is used to perform the decompression.
+ This is an optional parameter that may be NULL if the
+ required scratch buffer size is 0.
+
+ @retval RETURN_SUCCESS Decompression completed successfully, and
+ the uncompressed buffer is returned in Destination.
+ @retval RETURN_INVALID_PARAMETER
+ The source buffer specified by Source is corrupted
+ (not in a valid compressed format).
+**/
+RETURN_STATUS
+EFIAPI
+LzmaUefiDecompress (
+ IN CONST VOID *Source,
+ IN UINTN SourceSize,
+ IN OUT VOID *Destination,
+ IN OUT VOID *Scratch
+ )
+{
+ SRes LzmaResult;
+ ELzmaStatus Status;
+ SizeT DecodedBufSize;
+ SizeT EncodedDataSize;
+ ISzAllocWithData AllocFuncs;
+
+ AllocFuncs.Functions.Alloc = SzAlloc;
+ AllocFuncs.Functions.Free = SzFree;
+ AllocFuncs.Buffer = Scratch;
+ AllocFuncs.BufferSize = SCRATCH_BUFFER_REQUEST_SIZE;
+
+ DecodedBufSize = (SizeT)GetDecodedSizeOfBuf((UINT8*)Source);
+ EncodedDataSize = (SizeT) (SourceSize - LZMA_HEADER_SIZE);
+
+ LzmaResult = LzmaDecode(
+ Destination,
+ &DecodedBufSize,
+ (Byte*)((UINT8*)Source + LZMA_HEADER_SIZE),
+ &EncodedDataSize,
+ Source,
+ LZMA_PROPS_SIZE,
+ LZMA_FINISH_END,
+ &Status,
+ &(AllocFuncs.Functions)
+ );
+
+ if (LzmaResult == SZ_OK) {
+ return RETURN_SUCCESS;
+ } else {
+ return RETURN_INVALID_PARAMETER;
+ }
+}
+
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaDecompressLib.uni b/MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaDecompressLib.uni
new file mode 100644
index 0000000000..498e4e1088
Binary files /dev/null and b/MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaDecompressLib.uni differ
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaDecompressLibInternal.h b/MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaDecompressLibInternal.h
new file mode 100644
index 0000000000..3096e91dbe
--- /dev/null
+++ b/MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaDecompressLibInternal.h
@@ -0,0 +1,96 @@
+/** @file
+ LZMA Decompress Library internal header file declares Lzma decompress interfaces.
+
+ Copyright (c) 2009 - 2010, Intel Corporation. All rights reserved.
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __LZMADECOMPRESSLIB_INTERNAL_H__
+#define __LZMADECOMPRESSLIB_INTERNAL_H__
+
+#include
+#include
+#include
+#include
+#include
+#include
+
+/**
+ Given a Lzma compressed source buffer, this function retrieves the size of
+ the uncompressed buffer and the size of the scratch buffer required
+ to decompress the compressed source buffer.
+
+ Retrieves the size of the uncompressed buffer and the temporary scratch buffer
+ required to decompress the buffer specified by Source and SourceSize.
+ The size of the uncompressed buffer is returned in DestinationSize,
+ the size of the scratch buffer is returned in ScratchSize, and RETURN_SUCCESS is returned.
+ This function does not have scratch buffer available to perform a thorough
+ checking of the validity of the source data. It just retrieves the "Original Size"
+ field from the LZMA_HEADER_SIZE beginning bytes of the source data and output it as DestinationSize.
+ And ScratchSize is specific to the decompression implementation.
+
+ If SourceSize is less than LZMA_HEADER_SIZE, then ASSERT().
+
+ @param Source The source buffer containing the compressed data.
+ @param SourceSize The size, in bytes, of the source buffer.
+ @param DestinationSize A pointer to the size, in bytes, of the uncompressed buffer
+ that will be generated when the compressed buffer specified
+ by Source and SourceSize is decompressed.
+ @param ScratchSize A pointer to the size, in bytes, of the scratch buffer that
+ is required to decompress the compressed buffer specified
+ by Source and SourceSize.
+
+ @retval RETURN_SUCCESS The size of the uncompressed data was returned
+ in DestinationSize and the size of the scratch
+ buffer was returned in ScratchSize.
+
+**/
+RETURN_STATUS
+EFIAPI
+LzmaUefiDecompressGetInfo (
+ IN CONST VOID *Source,
+ IN UINT32 SourceSize,
+ OUT UINT32 *DestinationSize,
+ OUT UINT32 *ScratchSize
+ );
+
+/**
+ Decompresses a Lzma compressed source buffer.
+
+ Extracts decompressed data to its original form.
+ If the compressed source data specified by Source is successfully decompressed
+ into Destination, then RETURN_SUCCESS is returned. If the compressed source data
+ specified by Source is not in a valid compressed data format,
+ then RETURN_INVALID_PARAMETER is returned.
+
+ @param Source The source buffer containing the compressed data.
+ @param SourceSize The size of source buffer.
+ @param Destination The destination buffer to store the decompressed data
+ @param Scratch A temporary scratch buffer that is used to perform the decompression.
+ This is an optional parameter that may be NULL if the
+ required scratch buffer size is 0.
+
+ @retval RETURN_SUCCESS Decompression completed successfully, and
+ the uncompressed buffer is returned in Destination.
+ @retval RETURN_INVALID_PARAMETER
+ The source buffer specified by Source is corrupted
+ (not in a valid compressed format).
+**/
+RETURN_STATUS
+EFIAPI
+LzmaUefiDecompress (
+ IN CONST VOID *Source,
+ IN UINTN SourceSize,
+ IN OUT VOID *Destination,
+ IN OUT VOID *Scratch
+ );
+
+#endif
+
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/7zVersion.h b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/7zVersion.h
new file mode 100644
index 0000000000..5a6bcadac6
--- /dev/null
+++ b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/7zVersion.h
@@ -0,0 +1,7 @@
+#define MY_VER_MAJOR 4
+#define MY_VER_MINOR 65
+#define MY_VER_BUILD 0
+#define MY_VERSION "4.65"
+#define MY_DATE "2009-02-03"
+#define MY_COPYRIGHT ": Igor Pavlov : Public domain"
+#define MY_VERSION_COPYRIGHT_DATE MY_VERSION " " MY_COPYRIGHT " : " MY_DATE
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/Bra.h b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/Bra.h
new file mode 100644
index 0000000000..b9018eb991
--- /dev/null
+++ b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/Bra.h
@@ -0,0 +1,60 @@
+/* Bra.h -- Branch converters for executables
+2008-10-04 : Igor Pavlov : Public domain */
+
+#ifndef __BRA_H
+#define __BRA_H
+
+#include "Types.h"
+
+/*
+These functions convert relative addresses to absolute addresses
+in CALL instructions to increase the compression ratio.
+
+ In:
+ data - data buffer
+ size - size of data
+ ip - current virtual Instruction Pinter (IP) value
+ state - state variable for x86 converter
+ encoding - 0 (for decoding), 1 (for encoding)
+
+ Out:
+ state - state variable for x86 converter
+
+ Returns:
+ The number of processed bytes. If you call these functions with multiple calls,
+ you must start next call with first byte after block of processed bytes.
+
+ Type Endian Alignment LookAhead
+
+ x86 little 1 4
+ ARMT little 2 2
+ ARM little 4 0
+ PPC big 4 0
+ SPARC big 4 0
+ IA64 little 16 0
+
+ size must be >= Alignment + LookAhead, if it's not last block.
+ If (size < Alignment + LookAhead), converter returns 0.
+
+ Example:
+
+ UInt32 ip = 0;
+ for ()
+ {
+ ; size must be >= Alignment + LookAhead, if it's not last block
+ SizeT processed = Convert(data, size, ip, 1);
+ data += processed;
+ size -= processed;
+ ip += processed;
+ }
+*/
+
+#define x86_Convert_Init(state) { state = 0; }
+SizeT x86_Convert(Byte *data, SizeT size, UInt32 ip, UInt32 *state, int encoding);
+SizeT ARM_Convert(Byte *data, SizeT size, UInt32 ip, int encoding);
+SizeT ARMT_Convert(Byte *data, SizeT size, UInt32 ip, int encoding);
+SizeT PPC_Convert(Byte *data, SizeT size, UInt32 ip, int encoding);
+SizeT SPARC_Convert(Byte *data, SizeT size, UInt32 ip, int encoding);
+SizeT IA64_Convert(Byte *data, SizeT size, UInt32 ip, int encoding);
+
+#endif
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/Bra86.c b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/Bra86.c
new file mode 100644
index 0000000000..93566cb212
--- /dev/null
+++ b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/Bra86.c
@@ -0,0 +1,85 @@
+/* Bra86.c -- Converter for x86 code (BCJ)
+2008-10-04 : Igor Pavlov : Public domain */
+
+#include "Bra.h"
+
+#define Test86MSByte(b) ((b) == 0 || (b) == 0xFF)
+
+const Byte kMaskToAllowedStatus[8] = {1, 1, 1, 0, 1, 0, 0, 0};
+const Byte kMaskToBitNumber[8] = {0, 1, 2, 2, 3, 3, 3, 3};
+
+SizeT x86_Convert(Byte *data, SizeT size, UInt32 ip, UInt32 *state, int encoding)
+{
+ SizeT bufferPos = 0, prevPosT;
+ UInt32 prevMask = *state & 0x7;
+ if (size < 5)
+ return 0;
+ ip += 5;
+ prevPosT = (SizeT)0 - 1;
+
+ for (;;)
+ {
+ Byte *p = data + bufferPos;
+ Byte *limit = data + size - 4;
+ for (; p < limit; p++)
+ if ((*p & 0xFE) == 0xE8)
+ break;
+ bufferPos = (SizeT)(p - data);
+ if (p >= limit)
+ break;
+ prevPosT = bufferPos - prevPosT;
+ if (prevPosT > 3)
+ prevMask = 0;
+ else
+ {
+ prevMask = (prevMask << ((int)prevPosT - 1)) & 0x7;
+ if (prevMask != 0)
+ {
+ Byte b = p[4 - kMaskToBitNumber[prevMask]];
+ if (!kMaskToAllowedStatus[prevMask] || Test86MSByte(b))
+ {
+ prevPosT = bufferPos;
+ prevMask = ((prevMask << 1) & 0x7) | 1;
+ bufferPos++;
+ continue;
+ }
+ }
+ }
+ prevPosT = bufferPos;
+
+ if (Test86MSByte(p[4]))
+ {
+ UInt32 src = ((UInt32)p[4] << 24) | ((UInt32)p[3] << 16) | ((UInt32)p[2] << 8) | ((UInt32)p[1]);
+ UInt32 dest;
+ for (;;)
+ {
+ Byte b;
+ int index;
+ if (encoding)
+ dest = (ip + (UInt32)bufferPos) + src;
+ else
+ dest = src - (ip + (UInt32)bufferPos);
+ if (prevMask == 0)
+ break;
+ index = kMaskToBitNumber[prevMask] * 8;
+ b = (Byte)(dest >> (24 - index));
+ if (!Test86MSByte(b))
+ break;
+ src = dest ^ ((1 << (32 - index)) - 1);
+ }
+ p[4] = (Byte)(~(((dest >> 24) & 1) - 1));
+ p[3] = (Byte)(dest >> 16);
+ p[2] = (Byte)(dest >> 8);
+ p[1] = (Byte)dest;
+ bufferPos += 5;
+ }
+ else
+ {
+ prevMask = ((prevMask << 1) & 0x7) | 1;
+ bufferPos++;
+ }
+ }
+ prevPosT = bufferPos - prevPosT;
+ *state = ((prevPosT > 3) ? 0 : ((prevMask << ((int)prevPosT - 1)) & 0x7));
+ return bufferPos;
+}
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/CpuArch.h b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/CpuArch.h
new file mode 100644
index 0000000000..006361f2f2
--- /dev/null
+++ b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/CpuArch.h
@@ -0,0 +1,69 @@
+/* CpuArch.h
+2008-08-05
+Igor Pavlov
+Public domain */
+
+#ifndef __CPUARCH_H
+#define __CPUARCH_H
+
+/*
+LITTLE_ENDIAN_UNALIGN means:
+ 1) CPU is LITTLE_ENDIAN
+ 2) it's allowed to make unaligned memory accesses
+if LITTLE_ENDIAN_UNALIGN is not defined, it means that we don't know
+about these properties of platform.
+*/
+
+#if defined(_M_IX86) || defined(_M_X64) || defined(_M_AMD64) || defined(__i386__) || defined(__x86_64__)
+#define LITTLE_ENDIAN_UNALIGN
+#endif
+
+#ifdef LITTLE_ENDIAN_UNALIGN
+
+#define GetUi16(p) (*(const UInt16 *)(p))
+#define GetUi32(p) (*(const UInt32 *)(p))
+#define GetUi64(p) (*(const UInt64 *)(p))
+#define SetUi32(p, d) *(UInt32 *)(p) = (d);
+
+#else
+
+#define GetUi16(p) (((const Byte *)(p))[0] | ((UInt16)((const Byte *)(p))[1] << 8))
+
+#define GetUi32(p) ( \
+ ((const Byte *)(p))[0] | \
+ ((UInt32)((const Byte *)(p))[1] << 8) | \
+ ((UInt32)((const Byte *)(p))[2] << 16) | \
+ ((UInt32)((const Byte *)(p))[3] << 24))
+
+#define GetUi64(p) (GetUi32(p) | ((UInt64)GetUi32(((const Byte *)(p)) + 4) << 32))
+
+#define SetUi32(p, d) { UInt32 _x_ = (d); \
+ ((Byte *)(p))[0] = (Byte)_x_; \
+ ((Byte *)(p))[1] = (Byte)(_x_ >> 8); \
+ ((Byte *)(p))[2] = (Byte)(_x_ >> 16); \
+ ((Byte *)(p))[3] = (Byte)(_x_ >> 24); }
+
+#endif
+
+#if defined(LITTLE_ENDIAN_UNALIGN) && defined(_WIN64) && (_MSC_VER >= 1300)
+
+#pragma intrinsic(_byteswap_ulong)
+#pragma intrinsic(_byteswap_uint64)
+#define GetBe32(p) _byteswap_ulong(*(const UInt32 *)(const Byte *)(p))
+#define GetBe64(p) _byteswap_uint64(*(const UInt64 *)(const Byte *)(p))
+
+#else
+
+#define GetBe32(p) ( \
+ ((UInt32)((const Byte *)(p))[0] << 24) | \
+ ((UInt32)((const Byte *)(p))[1] << 16) | \
+ ((UInt32)((const Byte *)(p))[2] << 8) | \
+ ((const Byte *)(p))[3] )
+
+#define GetBe64(p) (((UInt64)GetBe32(p) << 32) | GetBe32(((const Byte *)(p)) + 4))
+
+#endif
+
+#define GetBe16(p) (((UInt16)((const Byte *)(p))[0] << 8) | ((const Byte *)(p))[1])
+
+#endif
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/LzFind.c b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/LzFind.c
new file mode 100644
index 0000000000..492cea2e41
--- /dev/null
+++ b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/LzFind.c
@@ -0,0 +1,770 @@
+/** @file
+ LzFind.c
+
+ Based on LZMA SDK 4.65:
+ LzFind.c -- Match finder for LZ algorithms
+ 2008-10-04 : Igor Pavlov : Public domain
+
+ Copyright (c) 2009, Intel Corporation. All rights reserved.
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef EFIAPI
+
+#include
+
+#endif // !EFIAPI
+
+#include "LzFind.h"
+#include "LzHash.h"
+
+#define kEmptyHashValue 0
+#define kMaxValForNormalize ((UInt32)0xFFFFFFFF)
+#define kNormalizeStepMin (1 << 10) /* it must be power of 2 */
+#define kNormalizeMask (~(kNormalizeStepMin - 1))
+#define kMaxHistorySize ((UInt32)3 << 30)
+
+#define kStartMaxLen 3
+
+static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
+{
+ if (!p->directInput)
+ {
+ alloc->Free(alloc, p->bufferBase);
+ p->bufferBase = 0;
+ }
+}
+
+/* keepSizeBefore + keepSizeAfter + keepSizeReserv must be < 4G) */
+
+static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
+{
+ UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
+ if (p->directInput)
+ {
+ p->blockSize = blockSize;
+ return 1;
+ }
+ if (p->bufferBase == 0 || p->blockSize != blockSize)
+ {
+ LzInWindow_Free(p, alloc);
+ p->blockSize = blockSize;
+ p->bufferBase = (Byte *)alloc->Alloc(alloc, (size_t)blockSize);
+ }
+ return (p->bufferBase != 0);
+}
+
+Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
+Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
+
+UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
+
+void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
+{
+ p->posLimit -= subValue;
+ p->pos -= subValue;
+ p->streamPos -= subValue;
+}
+
+static void MatchFinder_ReadBlock(CMatchFinder *p)
+{
+ if (p->streamEndWasReached || p->result != SZ_OK)
+ return;
+ for (;;)
+ {
+ Byte *dest = p->buffer + (p->streamPos - p->pos);
+ size_t size = (p->bufferBase + p->blockSize - dest);
+ if (size == 0)
+ return;
+ p->result = p->stream->Read(p->stream, dest, &size);
+ if (p->result != SZ_OK)
+ return;
+ if (size == 0)
+ {
+ p->streamEndWasReached = 1;
+ return;
+ }
+ p->streamPos += (UInt32)size;
+ if (p->streamPos - p->pos > p->keepSizeAfter)
+ return;
+ }
+}
+
+void MatchFinder_MoveBlock(CMatchFinder *p)
+{
+ memmove(p->bufferBase,
+ p->buffer - p->keepSizeBefore,
+ (size_t)(p->streamPos - p->pos + p->keepSizeBefore));
+ p->buffer = p->bufferBase + p->keepSizeBefore;
+}
+
+int MatchFinder_NeedMove(CMatchFinder *p)
+{
+ /* if (p->streamEndWasReached) return 0; */
+ return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
+}
+
+void MatchFinder_ReadIfRequired(CMatchFinder *p)
+{
+ if (p->streamEndWasReached)
+ return;
+ if (p->keepSizeAfter >= p->streamPos - p->pos)
+ MatchFinder_ReadBlock(p);
+}
+
+static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
+{
+ if (MatchFinder_NeedMove(p))
+ MatchFinder_MoveBlock(p);
+ MatchFinder_ReadBlock(p);
+}
+
+static void MatchFinder_SetDefaultSettings(CMatchFinder *p)
+{
+ p->cutValue = 32;
+ p->btMode = 1;
+ p->numHashBytes = 4;
+ /* p->skipModeBits = 0; */
+ p->directInput = 0;
+ p->bigHash = 0;
+}
+
+#define kCrcPoly 0xEDB88320
+
+void MatchFinder_Construct(CMatchFinder *p)
+{
+ UInt32 i;
+ p->bufferBase = 0;
+ p->directInput = 0;
+ p->hash = 0;
+ MatchFinder_SetDefaultSettings(p);
+
+ for (i = 0; i < 256; i++)
+ {
+ UInt32 r = i;
+ int j;
+ for (j = 0; j < 8; j++)
+ r = (r >> 1) ^ (kCrcPoly & ~((r & 1) - 1));
+ p->crc[i] = r;
+ }
+}
+
+static void MatchFinder_FreeThisClassMemory(CMatchFinder *p, ISzAlloc *alloc)
+{
+ alloc->Free(alloc, p->hash);
+ p->hash = 0;
+}
+
+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc)
+{
+ MatchFinder_FreeThisClassMemory(p, alloc);
+ LzInWindow_Free(p, alloc);
+}
+
+static CLzRef* AllocRefs(UInt32 num, ISzAlloc *alloc)
+{
+ size_t sizeInBytes = (size_t)num * sizeof(CLzRef);
+ if (sizeInBytes / sizeof(CLzRef) != num)
+ return 0;
+ return (CLzRef *)alloc->Alloc(alloc, sizeInBytes);
+}
+
+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
+ UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
+ ISzAlloc *alloc)
+{
+ UInt32 sizeReserv;
+ if (historySize > kMaxHistorySize)
+ {
+ MatchFinder_Free(p, alloc);
+ return 0;
+ }
+ sizeReserv = historySize >> 1;
+ if (historySize > ((UInt32)2 << 30))
+ sizeReserv = historySize >> 2;
+ sizeReserv += (keepAddBufferBefore + matchMaxLen + keepAddBufferAfter) / 2 + (1 << 19);
+
+ p->keepSizeBefore = historySize + keepAddBufferBefore + 1;
+ p->keepSizeAfter = matchMaxLen + keepAddBufferAfter;
+ /* we need one additional byte, since we use MoveBlock after pos++ and before dictionary using */
+ if (LzInWindow_Create(p, sizeReserv, alloc))
+ {
+ UInt32 newCyclicBufferSize = (historySize /* >> p->skipModeBits */) + 1;
+ UInt32 hs;
+ p->matchMaxLen = matchMaxLen;
+ {
+ p->fixedHashSize = 0;
+ if (p->numHashBytes == 2)
+ hs = (1 << 16) - 1;
+ else
+ {
+ hs = historySize - 1;
+ hs |= (hs >> 1);
+ hs |= (hs >> 2);
+ hs |= (hs >> 4);
+ hs |= (hs >> 8);
+ hs >>= 1;
+ /* hs >>= p->skipModeBits; */
+ hs |= 0xFFFF; /* don't change it! It's required for Deflate */
+ if (hs > (1 << 24))
+ {
+ if (p->numHashBytes == 3)
+ hs = (1 << 24) - 1;
+ else
+ hs >>= 1;
+ }
+ }
+ p->hashMask = hs;
+ hs++;
+ if (p->numHashBytes > 2) p->fixedHashSize += kHash2Size;
+ if (p->numHashBytes > 3) p->fixedHashSize += kHash3Size;
+ if (p->numHashBytes > 4) p->fixedHashSize += kHash4Size;
+ hs += p->fixedHashSize;
+ }
+
+ {
+ UInt32 prevSize = p->hashSizeSum + p->numSons;
+ UInt32 newSize;
+ p->historySize = historySize;
+ p->hashSizeSum = hs;
+ p->cyclicBufferSize = newCyclicBufferSize;
+ p->numSons = (p->btMode ? newCyclicBufferSize * 2 : newCyclicBufferSize);
+ newSize = p->hashSizeSum + p->numSons;
+ if (p->hash != 0 && prevSize == newSize)
+ return 1;
+ MatchFinder_FreeThisClassMemory(p, alloc);
+ p->hash = AllocRefs(newSize, alloc);
+ if (p->hash != 0)
+ {
+ p->son = p->hash + p->hashSizeSum;
+ return 1;
+ }
+ }
+ }
+ MatchFinder_Free(p, alloc);
+ return 0;
+}
+
+static void MatchFinder_SetLimits(CMatchFinder *p)
+{
+ UInt32 limit = kMaxValForNormalize - p->pos;
+ UInt32 limit2 = p->cyclicBufferSize - p->cyclicBufferPos;
+ if (limit2 < limit)
+ limit = limit2;
+ limit2 = p->streamPos - p->pos;
+ if (limit2 <= p->keepSizeAfter)
+ {
+ if (limit2 > 0)
+ limit2 = 1;
+ }
+ else
+ limit2 -= p->keepSizeAfter;
+ if (limit2 < limit)
+ limit = limit2;
+ {
+ UInt32 lenLimit = p->streamPos - p->pos;
+ if (lenLimit > p->matchMaxLen)
+ lenLimit = p->matchMaxLen;
+ p->lenLimit = lenLimit;
+ }
+ p->posLimit = p->pos + limit;
+}
+
+void MatchFinder_Init(CMatchFinder *p)
+{
+ UInt32 i;
+ for (i = 0; i < p->hashSizeSum; i++)
+ p->hash[i] = kEmptyHashValue;
+ p->cyclicBufferPos = 0;
+ p->buffer = p->bufferBase;
+ p->pos = p->streamPos = p->cyclicBufferSize;
+ p->result = SZ_OK;
+ p->streamEndWasReached = 0;
+ MatchFinder_ReadBlock(p);
+ MatchFinder_SetLimits(p);
+}
+
+static UInt32 MatchFinder_GetSubValue(CMatchFinder *p)
+{
+ return (p->pos - p->historySize - 1) & kNormalizeMask;
+}
+
+void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
+{
+ UInt32 i;
+ for (i = 0; i < numItems; i++)
+ {
+ UInt32 value = items[i];
+ if (value <= subValue)
+ value = kEmptyHashValue;
+ else
+ value -= subValue;
+ items[i] = value;
+ }
+}
+
+static void MatchFinder_Normalize(CMatchFinder *p)
+{
+ UInt32 subValue = MatchFinder_GetSubValue(p);
+ MatchFinder_Normalize3(subValue, p->hash, p->hashSizeSum + p->numSons);
+ MatchFinder_ReduceOffsets(p, subValue);
+}
+
+static void MatchFinder_CheckLimits(CMatchFinder *p)
+{
+ if (p->pos == kMaxValForNormalize)
+ MatchFinder_Normalize(p);
+ if (!p->streamEndWasReached && p->keepSizeAfter == p->streamPos - p->pos)
+ MatchFinder_CheckAndMoveAndRead(p);
+ if (p->cyclicBufferPos == p->cyclicBufferSize)
+ p->cyclicBufferPos = 0;
+ MatchFinder_SetLimits(p);
+}
+
+static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
+ UInt32 *distances, UInt32 maxLen)
+{
+ son[_cyclicBufferPos] = curMatch;
+ for (;;)
+ {
+ UInt32 delta = pos - curMatch;
+ if (cutValue-- == 0 || delta >= _cyclicBufferSize)
+ return distances;
+ {
+ const Byte *pb = cur - delta;
+ curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)];
+ if (pb[maxLen] == cur[maxLen] && *pb == *cur)
+ {
+ UInt32 len = 0;
+ while (++len != lenLimit)
+ if (pb[len] != cur[len])
+ break;
+ if (maxLen < len)
+ {
+ *distances++ = maxLen = len;
+ *distances++ = delta - 1;
+ if (len == lenLimit)
+ return distances;
+ }
+ }
+ }
+ }
+}
+
+UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
+ UInt32 *distances, UInt32 maxLen)
+{
+ CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
+ CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
+ UInt32 len0 = 0, len1 = 0;
+ for (;;)
+ {
+ UInt32 delta = pos - curMatch;
+ if (cutValue-- == 0 || delta >= _cyclicBufferSize)
+ {
+ *ptr0 = *ptr1 = kEmptyHashValue;
+ return distances;
+ }
+ {
+ CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
+ const Byte *pb = cur - delta;
+ UInt32 len = (len0 < len1 ? len0 : len1);
+ if (pb[len] == cur[len])
+ {
+ if (++len != lenLimit && pb[len] == cur[len])
+ while (++len != lenLimit)
+ if (pb[len] != cur[len])
+ break;
+ if (maxLen < len)
+ {
+ *distances++ = maxLen = len;
+ *distances++ = delta - 1;
+ if (len == lenLimit)
+ {
+ *ptr1 = pair[0];
+ *ptr0 = pair[1];
+ return distances;
+ }
+ }
+ }
+ if (pb[len] < cur[len])
+ {
+ *ptr1 = curMatch;
+ ptr1 = pair + 1;
+ curMatch = *ptr1;
+ len1 = len;
+ }
+ else
+ {
+ *ptr0 = curMatch;
+ ptr0 = pair;
+ curMatch = *ptr0;
+ len0 = len;
+ }
+ }
+ }
+}
+
+static void SkipMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue)
+{
+ CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
+ CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
+ UInt32 len0 = 0, len1 = 0;
+ for (;;)
+ {
+ UInt32 delta = pos - curMatch;
+ if (cutValue-- == 0 || delta >= _cyclicBufferSize)
+ {
+ *ptr0 = *ptr1 = kEmptyHashValue;
+ return;
+ }
+ {
+ CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
+ const Byte *pb = cur - delta;
+ UInt32 len = (len0 < len1 ? len0 : len1);
+ if (pb[len] == cur[len])
+ {
+ while (++len != lenLimit)
+ if (pb[len] != cur[len])
+ break;
+ {
+ if (len == lenLimit)
+ {
+ *ptr1 = pair[0];
+ *ptr0 = pair[1];
+ return;
+ }
+ }
+ }
+ if (pb[len] < cur[len])
+ {
+ *ptr1 = curMatch;
+ ptr1 = pair + 1;
+ curMatch = *ptr1;
+ len1 = len;
+ }
+ else
+ {
+ *ptr0 = curMatch;
+ ptr0 = pair;
+ curMatch = *ptr0;
+ len0 = len;
+ }
+ }
+ }
+}
+
+#define MOVE_POS \
+ ++p->cyclicBufferPos; \
+ p->buffer++; \
+ if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
+
+#define MOVE_POS_RET MOVE_POS return offset;
+
+static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
+
+#define GET_MATCHES_HEADER2(minLen, ret_op) \
+ UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
+ lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
+ cur = p->buffer;
+
+#define GET_MATCHES_HEADER(minLen) GET_MATCHES_HEADER2(minLen, return 0)
+#define SKIP_HEADER(minLen) GET_MATCHES_HEADER2(minLen, continue)
+
+#define MF_PARAMS(p) p->pos, p->buffer, p->son, p->cyclicBufferPos, p->cyclicBufferSize, p->cutValue
+
+#define GET_MATCHES_FOOTER(offset, maxLen) \
+ offset = (UInt32)(GetMatchesSpec1(lenLimit, curMatch, MF_PARAMS(p), \
+ distances + offset, maxLen) - distances); MOVE_POS_RET;
+
+#define SKIP_FOOTER \
+ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS;
+
+static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
+{
+ UInt32 offset;
+ GET_MATCHES_HEADER(2)
+ HASH2_CALC;
+ curMatch = p->hash[hashValue];
+ p->hash[hashValue] = p->pos;
+ offset = 0;
+ GET_MATCHES_FOOTER(offset, 1)
+}
+
+UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
+{
+ UInt32 offset;
+ GET_MATCHES_HEADER(3)
+ HASH_ZIP_CALC;
+ curMatch = p->hash[hashValue];
+ p->hash[hashValue] = p->pos;
+ offset = 0;
+ GET_MATCHES_FOOTER(offset, 2)
+}
+
+static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
+{
+ UInt32 hash2Value, delta2, maxLen, offset;
+ GET_MATCHES_HEADER(3)
+
+ HASH3_CALC;
+
+ delta2 = p->pos - p->hash[hash2Value];
+ curMatch = p->hash[kFix3HashSize + hashValue];
+
+ p->hash[hash2Value] =
+ p->hash[kFix3HashSize + hashValue] = p->pos;
+
+
+ maxLen = 2;
+ offset = 0;
+ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
+ {
+ for (; maxLen != lenLimit; maxLen++)
+ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
+ break;
+ distances[0] = maxLen;
+ distances[1] = delta2 - 1;
+ offset = 2;
+ if (maxLen == lenLimit)
+ {
+ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
+ MOVE_POS_RET;
+ }
+ }
+ GET_MATCHES_FOOTER(offset, maxLen)
+}
+
+static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
+{
+ UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
+ GET_MATCHES_HEADER(4)
+
+ HASH4_CALC;
+
+ delta2 = p->pos - p->hash[ hash2Value];
+ delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
+ curMatch = p->hash[kFix4HashSize + hashValue];
+
+ p->hash[ hash2Value] =
+ p->hash[kFix3HashSize + hash3Value] =
+ p->hash[kFix4HashSize + hashValue] = p->pos;
+
+ maxLen = 1;
+ offset = 0;
+ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
+ {
+ distances[0] = maxLen = 2;
+ distances[1] = delta2 - 1;
+ offset = 2;
+ }
+ if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
+ {
+ maxLen = 3;
+ distances[offset + 1] = delta3 - 1;
+ offset += 2;
+ delta2 = delta3;
+ }
+ if (offset != 0)
+ {
+ for (; maxLen != lenLimit; maxLen++)
+ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
+ break;
+ distances[offset - 2] = maxLen;
+ if (maxLen == lenLimit)
+ {
+ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
+ MOVE_POS_RET;
+ }
+ }
+ if (maxLen < 3)
+ maxLen = 3;
+ GET_MATCHES_FOOTER(offset, maxLen)
+}
+
+static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
+{
+ UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
+ GET_MATCHES_HEADER(4)
+
+ HASH4_CALC;
+
+ delta2 = p->pos - p->hash[ hash2Value];
+ delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
+ curMatch = p->hash[kFix4HashSize + hashValue];
+
+ p->hash[ hash2Value] =
+ p->hash[kFix3HashSize + hash3Value] =
+ p->hash[kFix4HashSize + hashValue] = p->pos;
+
+ maxLen = 1;
+ offset = 0;
+ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
+ {
+ distances[0] = maxLen = 2;
+ distances[1] = delta2 - 1;
+ offset = 2;
+ }
+ if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
+ {
+ maxLen = 3;
+ distances[offset + 1] = delta3 - 1;
+ offset += 2;
+ delta2 = delta3;
+ }
+ if (offset != 0)
+ {
+ for (; maxLen != lenLimit; maxLen++)
+ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
+ break;
+ distances[offset - 2] = maxLen;
+ if (maxLen == lenLimit)
+ {
+ p->son[p->cyclicBufferPos] = curMatch;
+ MOVE_POS_RET;
+ }
+ }
+ if (maxLen < 3)
+ maxLen = 3;
+ offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
+ distances + offset, maxLen) - (distances));
+ MOVE_POS_RET
+}
+
+UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
+{
+ UInt32 offset;
+ GET_MATCHES_HEADER(3)
+ HASH_ZIP_CALC;
+ curMatch = p->hash[hashValue];
+ p->hash[hashValue] = p->pos;
+ offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
+ distances, 2) - (distances));
+ MOVE_POS_RET
+}
+
+static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
+{
+ do
+ {
+ SKIP_HEADER(2)
+ HASH2_CALC;
+ curMatch = p->hash[hashValue];
+ p->hash[hashValue] = p->pos;
+ SKIP_FOOTER
+ }
+ while (--num != 0);
+}
+
+void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
+{
+ do
+ {
+ SKIP_HEADER(3)
+ HASH_ZIP_CALC;
+ curMatch = p->hash[hashValue];
+ p->hash[hashValue] = p->pos;
+ SKIP_FOOTER
+ }
+ while (--num != 0);
+}
+
+static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
+{
+ do
+ {
+ UInt32 hash2Value;
+ SKIP_HEADER(3)
+ HASH3_CALC;
+ curMatch = p->hash[kFix3HashSize + hashValue];
+ p->hash[hash2Value] =
+ p->hash[kFix3HashSize + hashValue] = p->pos;
+ SKIP_FOOTER
+ }
+ while (--num != 0);
+}
+
+static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
+{
+ do
+ {
+ UInt32 hash2Value, hash3Value;
+ SKIP_HEADER(4)
+ HASH4_CALC;
+ curMatch = p->hash[kFix4HashSize + hashValue];
+ p->hash[ hash2Value] =
+ p->hash[kFix3HashSize + hash3Value] = p->pos;
+ p->hash[kFix4HashSize + hashValue] = p->pos;
+ SKIP_FOOTER
+ }
+ while (--num != 0);
+}
+
+static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
+{
+ do
+ {
+ UInt32 hash2Value, hash3Value;
+ SKIP_HEADER(4)
+ HASH4_CALC;
+ curMatch = p->hash[kFix4HashSize + hashValue];
+ p->hash[ hash2Value] =
+ p->hash[kFix3HashSize + hash3Value] =
+ p->hash[kFix4HashSize + hashValue] = p->pos;
+ p->son[p->cyclicBufferPos] = curMatch;
+ MOVE_POS
+ }
+ while (--num != 0);
+}
+
+void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
+{
+ do
+ {
+ SKIP_HEADER(3)
+ HASH_ZIP_CALC;
+ curMatch = p->hash[hashValue];
+ p->hash[hashValue] = p->pos;
+ p->son[p->cyclicBufferPos] = curMatch;
+ MOVE_POS
+ }
+ while (--num != 0);
+}
+
+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
+{
+ vTable->Init = (Mf_Init_Func)MatchFinder_Init;
+ vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
+ vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
+ vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
+ if (!p->btMode)
+ {
+ vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches;
+ vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip;
+ }
+ else if (p->numHashBytes == 2)
+ {
+ vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches;
+ vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip;
+ }
+ else if (p->numHashBytes == 3)
+ {
+ vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches;
+ vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip;
+ }
+ else
+ {
+ vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
+ vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
+ }
+}
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/LzFind.h b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/LzFind.h
new file mode 100644
index 0000000000..423d67e0c3
--- /dev/null
+++ b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/LzFind.h
@@ -0,0 +1,107 @@
+/* LzFind.h -- Match finder for LZ algorithms
+2008-10-04 : Igor Pavlov : Public domain */
+
+#ifndef __LZFIND_H
+#define __LZFIND_H
+
+#include "Types.h"
+
+typedef UInt32 CLzRef;
+
+typedef struct _CMatchFinder
+{
+ Byte *buffer;
+ UInt32 pos;
+ UInt32 posLimit;
+ UInt32 streamPos;
+ UInt32 lenLimit;
+
+ UInt32 cyclicBufferPos;
+ UInt32 cyclicBufferSize; /* it must be = (historySize + 1) */
+
+ UInt32 matchMaxLen;
+ CLzRef *hash;
+ CLzRef *son;
+ UInt32 hashMask;
+ UInt32 cutValue;
+
+ Byte *bufferBase;
+ ISeqInStream *stream;
+ int streamEndWasReached;
+
+ UInt32 blockSize;
+ UInt32 keepSizeBefore;
+ UInt32 keepSizeAfter;
+
+ UInt32 numHashBytes;
+ int directInput;
+ int btMode;
+ /* int skipModeBits; */
+ int bigHash;
+ UInt32 historySize;
+ UInt32 fixedHashSize;
+ UInt32 hashSizeSum;
+ UInt32 numSons;
+ SRes result;
+ UInt32 crc[256];
+} CMatchFinder;
+
+#define Inline_MatchFinder_GetPointerToCurrentPos(p) ((p)->buffer)
+#define Inline_MatchFinder_GetIndexByte(p, index) ((p)->buffer[(Int32)(index)])
+
+#define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
+
+int MatchFinder_NeedMove(CMatchFinder *p);
+Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
+void MatchFinder_MoveBlock(CMatchFinder *p);
+void MatchFinder_ReadIfRequired(CMatchFinder *p);
+
+void MatchFinder_Construct(CMatchFinder *p);
+
+/* Conditions:
+ historySize <= 3 GB
+ keepAddBufferBefore + matchMaxLen + keepAddBufferAfter < 511MB
+*/
+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
+ UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
+ ISzAlloc *alloc);
+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
+void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
+void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
+
+UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
+ UInt32 *distances, UInt32 maxLen);
+
+/*
+Conditions:
+ Mf_GetNumAvailableBytes_Func must be called before each Mf_GetMatchLen_Func.
+ Mf_GetPointerToCurrentPos_Func's result must be used only before any other function
+*/
+
+typedef void (*Mf_Init_Func)(void *object);
+typedef Byte (*Mf_GetIndexByte_Func)(void *object, Int32 index);
+typedef UInt32 (*Mf_GetNumAvailableBytes_Func)(void *object);
+typedef const Byte * (*Mf_GetPointerToCurrentPos_Func)(void *object);
+typedef UInt32 (*Mf_GetMatches_Func)(void *object, UInt32 *distances);
+typedef void (*Mf_Skip_Func)(void *object, UInt32);
+
+typedef struct _IMatchFinder
+{
+ Mf_Init_Func Init;
+ Mf_GetIndexByte_Func GetIndexByte;
+ Mf_GetNumAvailableBytes_Func GetNumAvailableBytes;
+ Mf_GetPointerToCurrentPos_Func GetPointerToCurrentPos;
+ Mf_GetMatches_Func GetMatches;
+ Mf_Skip_Func Skip;
+} IMatchFinder;
+
+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
+
+void MatchFinder_Init(CMatchFinder *p);
+UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
+UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
+void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
+void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
+
+#endif
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/LzHash.h b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/LzHash.h
new file mode 100644
index 0000000000..c923417501
--- /dev/null
+++ b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/LzHash.h
@@ -0,0 +1,54 @@
+/* LzHash.h -- HASH functions for LZ algorithms
+2008-10-04 : Igor Pavlov : Public domain */
+
+#ifndef __LZHASH_H
+#define __LZHASH_H
+
+#define kHash2Size (1 << 10)
+#define kHash3Size (1 << 16)
+#define kHash4Size (1 << 20)
+
+#define kFix3HashSize (kHash2Size)
+#define kFix4HashSize (kHash2Size + kHash3Size)
+#define kFix5HashSize (kHash2Size + kHash3Size + kHash4Size)
+
+#define HASH2_CALC hashValue = cur[0] | ((UInt32)cur[1] << 8);
+
+#define HASH3_CALC { \
+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
+ hash2Value = temp & (kHash2Size - 1); \
+ hashValue = (temp ^ ((UInt32)cur[2] << 8)) & p->hashMask; }
+
+#define HASH4_CALC { \
+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
+ hash2Value = temp & (kHash2Size - 1); \
+ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
+ hashValue = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & p->hashMask; }
+
+#define HASH5_CALC { \
+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
+ hash2Value = temp & (kHash2Size - 1); \
+ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
+ hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)); \
+ hashValue = (hash4Value ^ (p->crc[cur[4]] << 3)) & p->hashMask; \
+ hash4Value &= (kHash4Size - 1); }
+
+/* #define HASH_ZIP_CALC hashValue = ((cur[0] | ((UInt32)cur[1] << 8)) ^ p->crc[cur[2]]) & 0xFFFF; */
+#define HASH_ZIP_CALC hashValue = ((cur[2] | ((UInt32)cur[0] << 8)) ^ p->crc[cur[1]]) & 0xFFFF;
+
+
+#define MT_HASH2_CALC \
+ hash2Value = (p->crc[cur[0]] ^ cur[1]) & (kHash2Size - 1);
+
+#define MT_HASH3_CALC { \
+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
+ hash2Value = temp & (kHash2Size - 1); \
+ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); }
+
+#define MT_HASH4_CALC { \
+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
+ hash2Value = temp & (kHash2Size - 1); \
+ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
+ hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & (kHash4Size - 1); }
+
+#endif
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/LzmaDec.c b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/LzmaDec.c
new file mode 100644
index 0000000000..e3db4edbb4
--- /dev/null
+++ b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/LzmaDec.c
@@ -0,0 +1,1026 @@
+/** @file
+ LzmaDec.c
+
+ Based on LZMA SDK 4.65:
+ LzmaDec.c -- LZMA Decoder
+ 2008-11-06 : Igor Pavlov : Public domain
+
+ Copyright (c) 2009, Intel Corporation. All rights reserved.
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "LzmaDec.h"
+
+#ifndef EFIAPI
+
+#include
+
+#endif // !EFIAPI
+
+#define kNumTopBits 24
+#define kTopValue ((UInt32)1 << kNumTopBits)
+
+#define kNumBitModelTotalBits 11
+#define kBitModelTotal (1 << kNumBitModelTotalBits)
+#define kNumMoveBits 5
+
+#define RC_INIT_SIZE 5
+
+#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); }
+
+#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
+#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits));
+#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits));
+#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \
+ { UPDATE_0(p); i = (i + i); A0; } else \
+ { UPDATE_1(p); i = (i + i) + 1; A1; }
+#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;)
+
+#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); }
+#define TREE_DECODE(probs, limit, i) \
+ { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; }
+
+/* #define _LZMA_SIZE_OPT */
+
+#ifdef _LZMA_SIZE_OPT
+#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i)
+#else
+#define TREE_6_DECODE(probs, i) \
+ { i = 1; \
+ TREE_GET_BIT(probs, i); \
+ TREE_GET_BIT(probs, i); \
+ TREE_GET_BIT(probs, i); \
+ TREE_GET_BIT(probs, i); \
+ TREE_GET_BIT(probs, i); \
+ TREE_GET_BIT(probs, i); \
+ i -= 0x40; }
+#endif
+
+#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); }
+
+#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
+#define UPDATE_0_CHECK range = bound;
+#define UPDATE_1_CHECK range -= bound; code -= bound;
+#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \
+ { UPDATE_0_CHECK; i = (i + i); A0; } else \
+ { UPDATE_1_CHECK; i = (i + i) + 1; A1; }
+#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;)
+#define TREE_DECODE_CHECK(probs, limit, i) \
+ { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; }
+
+
+#define kNumPosBitsMax 4
+#define kNumPosStatesMax (1 << kNumPosBitsMax)
+
+#define kLenNumLowBits 3
+#define kLenNumLowSymbols (1 << kLenNumLowBits)
+#define kLenNumMidBits 3
+#define kLenNumMidSymbols (1 << kLenNumMidBits)
+#define kLenNumHighBits 8
+#define kLenNumHighSymbols (1 << kLenNumHighBits)
+
+#define LenChoice 0
+#define LenChoice2 (LenChoice + 1)
+#define LenLow (LenChoice2 + 1)
+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
+#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
+
+
+#define kNumStates 12
+#define kNumLitStates 7
+
+#define kStartPosModelIndex 4
+#define kEndPosModelIndex 14
+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
+
+#define kNumPosSlotBits 6
+#define kNumLenToPosStates 4
+
+#define kNumAlignBits 4
+#define kAlignTableSize (1 << kNumAlignBits)
+
+#define kMatchMinLen 2
+#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
+
+#define IsMatch 0
+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
+#define IsRepG0 (IsRep + kNumStates)
+#define IsRepG1 (IsRepG0 + kNumStates)
+#define IsRepG2 (IsRepG1 + kNumStates)
+#define IsRep0Long (IsRepG2 + kNumStates)
+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
+#define LenCoder (Align + kAlignTableSize)
+#define RepLenCoder (LenCoder + kNumLenProbs)
+#define Literal (RepLenCoder + kNumLenProbs)
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp)))
+
+#if Literal != LZMA_BASE_SIZE
+StopCompilingDueBUG
+#endif
+
+static const Byte kLiteralNextStates[kNumStates * 2] =
+{
+ 0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 4, 5,
+ 7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10
+};
+
+#define LZMA_DIC_MIN (1 << 12)
+
+/* First LZMA-symbol is always decoded.
+And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization
+Out:
+ Result:
+ SZ_OK - OK
+ SZ_ERROR_DATA - Error
+ p->remainLen:
+ < kMatchSpecLenStart : normal remain
+ = kMatchSpecLenStart : finished
+ = kMatchSpecLenStart + 1 : Flush marker
+ = kMatchSpecLenStart + 2 : State Init Marker
+*/
+
+static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
+{
+ CLzmaProb *probs = p->probs;
+
+ unsigned state = p->state;
+ UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3];
+ unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1;
+ unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1;
+ unsigned lc = p->prop.lc;
+
+ Byte *dic = p->dic;
+ SizeT dicBufSize = p->dicBufSize;
+ SizeT dicPos = p->dicPos;
+
+ UInt32 processedPos = p->processedPos;
+ UInt32 checkDicSize = p->checkDicSize;
+ unsigned len = 0;
+
+ const Byte *buf = p->buf;
+ UInt32 range = p->range;
+ UInt32 code = p->code;
+
+ do
+ {
+ CLzmaProb *prob;
+ UInt32 bound;
+ unsigned ttt;
+ unsigned posState = processedPos & pbMask;
+
+ prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
+ IF_BIT_0(prob)
+ {
+ unsigned symbol;
+ UPDATE_0(prob);
+ prob = probs + Literal;
+ if (checkDicSize != 0 || processedPos != 0)
+ prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) +
+ (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc))));
+
+ if (state < kNumLitStates)
+ {
+ symbol = 1;
+ do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100);
+ }
+ else
+ {
+ unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
+ unsigned offs = 0x100;
+ symbol = 1;
+ do
+ {
+ unsigned bit;
+ CLzmaProb *probLit;
+ matchByte <<= 1;
+ bit = (matchByte & offs);
+ probLit = prob + offs + bit + symbol;
+ GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit)
+ }
+ while (symbol < 0x100);
+ }
+ dic[dicPos++] = (Byte)symbol;
+ processedPos++;
+
+ state = kLiteralNextStates[state];
+ /* if (state < 4) state = 0; else if (state < 10) state -= 3; else state -= 6; */
+ continue;
+ }
+ else
+ {
+ UPDATE_1(prob);
+ prob = probs + IsRep + state;
+ IF_BIT_0(prob)
+ {
+ UPDATE_0(prob);
+ state += kNumStates;
+ prob = probs + LenCoder;
+ }
+ else
+ {
+ UPDATE_1(prob);
+ if (checkDicSize == 0 && processedPos == 0)
+ return SZ_ERROR_DATA;
+ prob = probs + IsRepG0 + state;
+ IF_BIT_0(prob)
+ {
+ UPDATE_0(prob);
+ prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
+ IF_BIT_0(prob)
+ {
+ UPDATE_0(prob);
+ dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
+ dicPos++;
+ processedPos++;
+ state = state < kNumLitStates ? 9 : 11;
+ continue;
+ }
+ UPDATE_1(prob);
+ }
+ else
+ {
+ UInt32 distance;
+ UPDATE_1(prob);
+ prob = probs + IsRepG1 + state;
+ IF_BIT_0(prob)
+ {
+ UPDATE_0(prob);
+ distance = rep1;
+ }
+ else
+ {
+ UPDATE_1(prob);
+ prob = probs + IsRepG2 + state;
+ IF_BIT_0(prob)
+ {
+ UPDATE_0(prob);
+ distance = rep2;
+ }
+ else
+ {
+ UPDATE_1(prob);
+ distance = rep3;
+ rep3 = rep2;
+ }
+ rep2 = rep1;
+ }
+ rep1 = rep0;
+ rep0 = distance;
+ }
+ state = state < kNumLitStates ? 8 : 11;
+ prob = probs + RepLenCoder;
+ }
+ {
+ unsigned limit2, offset;
+ CLzmaProb *probLen = prob + LenChoice;
+ IF_BIT_0(probLen)
+ {
+ UPDATE_0(probLen);
+ probLen = prob + LenLow + (posState << kLenNumLowBits);
+ offset = 0;
+ limit2 = (1 << kLenNumLowBits);
+ }
+ else
+ {
+ UPDATE_1(probLen);
+ probLen = prob + LenChoice2;
+ IF_BIT_0(probLen)
+ {
+ UPDATE_0(probLen);
+ probLen = prob + LenMid + (posState << kLenNumMidBits);
+ offset = kLenNumLowSymbols;
+ limit2 = (1 << kLenNumMidBits);
+ }
+ else
+ {
+ UPDATE_1(probLen);
+ probLen = prob + LenHigh;
+ offset = kLenNumLowSymbols + kLenNumMidSymbols;
+ limit2 = (1 << kLenNumHighBits);
+ }
+ }
+ TREE_DECODE(probLen, limit2, len);
+ len += offset;
+ }
+
+ if (state >= kNumStates)
+ {
+ UInt32 distance;
+ prob = probs + PosSlot +
+ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits);
+ TREE_6_DECODE(prob, distance);
+ if (distance >= kStartPosModelIndex)
+ {
+ unsigned posSlot = (unsigned)distance;
+ int numDirectBits = (int)(((distance >> 1) - 1));
+ distance = (2 | (distance & 1));
+ if (posSlot < kEndPosModelIndex)
+ {
+ distance <<= numDirectBits;
+ prob = probs + SpecPos + distance - posSlot - 1;
+ {
+ UInt32 mask = 1;
+ unsigned i = 1;
+ do
+ {
+ GET_BIT2(prob + i, i, ; , distance |= mask);
+ mask <<= 1;
+ }
+ while (--numDirectBits != 0);
+ }
+ }
+ else
+ {
+ numDirectBits -= kNumAlignBits;
+ do
+ {
+ NORMALIZE
+ range >>= 1;
+
+ {
+ UInt32 t;
+ code -= range;
+ t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */
+ distance = (distance << 1) + (t + 1);
+ code += range & t;
+ }
+ /*
+ distance <<= 1;
+ if (code >= range)
+ {
+ code -= range;
+ distance |= 1;
+ }
+ */
+ }
+ while (--numDirectBits != 0);
+ prob = probs + Align;
+ distance <<= kNumAlignBits;
+ {
+ unsigned i = 1;
+ GET_BIT2(prob + i, i, ; , distance |= 1);
+ GET_BIT2(prob + i, i, ; , distance |= 2);
+ GET_BIT2(prob + i, i, ; , distance |= 4);
+ GET_BIT2(prob + i, i, ; , distance |= 8);
+ }
+ if (distance == (UInt32)0xFFFFFFFF)
+ {
+ len += kMatchSpecLenStart;
+ state -= kNumStates;
+ break;
+ }
+ }
+ }
+ rep3 = rep2;
+ rep2 = rep1;
+ rep1 = rep0;
+ rep0 = distance + 1;
+ if (checkDicSize == 0)
+ {
+ if (distance >= processedPos)
+ return SZ_ERROR_DATA;
+ }
+ else if (distance >= checkDicSize)
+ return SZ_ERROR_DATA;
+ state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3;
+ /* state = kLiteralNextStates[state]; */
+ }
+
+ len += kMatchMinLen;
+
+ if (limit == dicPos)
+ return SZ_ERROR_DATA;
+ {
+ SizeT rem = limit - dicPos;
+ unsigned curLen = ((rem < len) ? (unsigned)rem : len);
+ SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0);
+
+ processedPos += curLen;
+
+ len -= curLen;
+ if (pos + curLen <= dicBufSize)
+ {
+ Byte *dest = dic + dicPos;
+ ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos;
+ const Byte *lim = dest + curLen;
+ dicPos += curLen;
+ do
+ *((volatile Byte *)dest) = (Byte)*(dest + src);
+ while (++dest != lim);
+ }
+ else
+ {
+ do
+ {
+ dic[dicPos++] = dic[pos];
+ if (++pos == dicBufSize)
+ pos = 0;
+ }
+ while (--curLen != 0);
+ }
+ }
+ }
+ }
+ while (dicPos < limit && buf < bufLimit);
+ NORMALIZE;
+ p->buf = buf;
+ p->range = range;
+ p->code = code;
+ p->remainLen = len;
+ p->dicPos = dicPos;
+ p->processedPos = processedPos;
+ p->reps[0] = rep0;
+ p->reps[1] = rep1;
+ p->reps[2] = rep2;
+ p->reps[3] = rep3;
+ p->state = state;
+
+ return SZ_OK;
+}
+
+static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit)
+{
+ if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart)
+ {
+ Byte *dic = p->dic;
+ SizeT dicPos = p->dicPos;
+ SizeT dicBufSize = p->dicBufSize;
+ unsigned len = p->remainLen;
+ UInt32 rep0 = p->reps[0];
+ if (limit - dicPos < len)
+ len = (unsigned)(limit - dicPos);
+
+ if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len)
+ p->checkDicSize = p->prop.dicSize;
+
+ p->processedPos += len;
+ p->remainLen -= len;
+ while (len-- != 0)
+ {
+ dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
+ dicPos++;
+ }
+ p->dicPos = dicPos;
+ }
+}
+
+static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
+{
+ do
+ {
+ SizeT limit2 = limit;
+ if (p->checkDicSize == 0)
+ {
+ UInt32 rem = p->prop.dicSize - p->processedPos;
+ if (limit - p->dicPos > rem)
+ limit2 = p->dicPos + rem;
+ }
+ RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit));
+ if (p->processedPos >= p->prop.dicSize)
+ p->checkDicSize = p->prop.dicSize;
+ LzmaDec_WriteRem(p, limit);
+ }
+ while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart);
+
+ if (p->remainLen > kMatchSpecLenStart)
+ {
+ p->remainLen = kMatchSpecLenStart;
+ }
+ return 0;
+}
+
+typedef enum
+{
+ DUMMY_ERROR, /* unexpected end of input stream */
+ DUMMY_LIT,
+ DUMMY_MATCH,
+ DUMMY_REP
+} ELzmaDummy;
+
+static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize)
+{
+ UInt32 range = p->range;
+ UInt32 code = p->code;
+ const Byte *bufLimit = buf + inSize;
+ CLzmaProb *probs = p->probs;
+ unsigned state = p->state;
+ ELzmaDummy res;
+
+ {
+ CLzmaProb *prob;
+ UInt32 bound;
+ unsigned ttt;
+ unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1);
+
+ prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
+ IF_BIT_0_CHECK(prob)
+ {
+ UPDATE_0_CHECK
+
+ /* if (bufLimit - buf >= 7) return DUMMY_LIT; */
+
+ prob = probs + Literal;
+ if (p->checkDicSize != 0 || p->processedPos != 0)
+ prob += (LZMA_LIT_SIZE *
+ ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) +
+ (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc))));
+
+ if (state < kNumLitStates)
+ {
+ unsigned symbol = 1;
+ do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100);
+ }
+ else
+ {
+ unsigned matchByte = p->dic[p->dicPos - p->reps[0] +
+ ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)];
+ unsigned offs = 0x100;
+ unsigned symbol = 1;
+ do
+ {
+ unsigned bit;
+ CLzmaProb *probLit;
+ matchByte <<= 1;
+ bit = (matchByte & offs);
+ probLit = prob + offs + bit + symbol;
+ GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit)
+ }
+ while (symbol < 0x100);
+ }
+ res = DUMMY_LIT;
+ }
+ else
+ {
+ unsigned len;
+ UPDATE_1_CHECK;
+
+ prob = probs + IsRep + state;
+ IF_BIT_0_CHECK(prob)
+ {
+ UPDATE_0_CHECK;
+ state = 0;
+ prob = probs + LenCoder;
+ res = DUMMY_MATCH;
+ }
+ else
+ {
+ UPDATE_1_CHECK;
+ res = DUMMY_REP;
+ prob = probs + IsRepG0 + state;
+ IF_BIT_0_CHECK(prob)
+ {
+ UPDATE_0_CHECK;
+ prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
+ IF_BIT_0_CHECK(prob)
+ {
+ UPDATE_0_CHECK;
+ NORMALIZE_CHECK;
+ return DUMMY_REP;
+ }
+ else
+ {
+ UPDATE_1_CHECK;
+ }
+ }
+ else
+ {
+ UPDATE_1_CHECK;
+ prob = probs + IsRepG1 + state;
+ IF_BIT_0_CHECK(prob)
+ {
+ UPDATE_0_CHECK;
+ }
+ else
+ {
+ UPDATE_1_CHECK;
+ prob = probs + IsRepG2 + state;
+ IF_BIT_0_CHECK(prob)
+ {
+ UPDATE_0_CHECK;
+ }
+ else
+ {
+ UPDATE_1_CHECK;
+ }
+ }
+ }
+ state = kNumStates;
+ prob = probs + RepLenCoder;
+ }
+ {
+ unsigned limit, offset;
+ CLzmaProb *probLen = prob + LenChoice;
+ IF_BIT_0_CHECK(probLen)
+ {
+ UPDATE_0_CHECK;
+ probLen = prob + LenLow + (posState << kLenNumLowBits);
+ offset = 0;
+ limit = 1 << kLenNumLowBits;
+ }
+ else
+ {
+ UPDATE_1_CHECK;
+ probLen = prob + LenChoice2;
+ IF_BIT_0_CHECK(probLen)
+ {
+ UPDATE_0_CHECK;
+ probLen = prob + LenMid + (posState << kLenNumMidBits);
+ offset = kLenNumLowSymbols;
+ limit = 1 << kLenNumMidBits;
+ }
+ else
+ {
+ UPDATE_1_CHECK;
+ probLen = prob + LenHigh;
+ offset = kLenNumLowSymbols + kLenNumMidSymbols;
+ limit = 1 << kLenNumHighBits;
+ }
+ }
+ TREE_DECODE_CHECK(probLen, limit, len);
+ len += offset;
+ }
+
+ if (state < 4)
+ {
+ unsigned posSlot;
+ prob = probs + PosSlot +
+ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
+ kNumPosSlotBits);
+ TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot);
+ if (posSlot >= kStartPosModelIndex)
+ {
+ int numDirectBits = ((posSlot >> 1) - 1);
+
+ /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */
+
+ if (posSlot < kEndPosModelIndex)
+ {
+ prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1;
+ }
+ else
+ {
+ numDirectBits -= kNumAlignBits;
+ do
+ {
+ NORMALIZE_CHECK
+ range >>= 1;
+ code -= range & (((code - range) >> 31) - 1);
+ /* if (code >= range) code -= range; */
+ }
+ while (--numDirectBits != 0);
+ prob = probs + Align;
+ numDirectBits = kNumAlignBits;
+ }
+ {
+ unsigned i = 1;
+ do
+ {
+ GET_BIT_CHECK(prob + i, i);
+ }
+ while (--numDirectBits != 0);
+ }
+ }
+ }
+ }
+ }
+ NORMALIZE_CHECK;
+ return res;
+}
+
+static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data)
+{
+ p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]);
+ p->range = 0xFFFFFFFF;
+ p->needFlush = 0;
+}
+
+void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
+{
+ p->needFlush = 1;
+ p->remainLen = 0;
+ p->tempBufSize = 0;
+
+ if (initDic)
+ {
+ p->processedPos = 0;
+ p->checkDicSize = 0;
+ p->needInitState = 1;
+ }
+ if (initState)
+ p->needInitState = 1;
+}
+
+void LzmaDec_Init(CLzmaDec *p)
+{
+ p->dicPos = 0;
+ LzmaDec_InitDicAndState(p, True, True);
+}
+
+static void LzmaDec_InitStateReal(CLzmaDec *p)
+{
+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp));
+ UInt32 i;
+ CLzmaProb *probs = p->probs;
+ for (i = 0; i < numProbs; i++)
+ probs[i] = kBitModelTotal >> 1;
+ p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1;
+ p->state = 0;
+ p->needInitState = 0;
+}
+
+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
+ ELzmaFinishMode finishMode, ELzmaStatus *status)
+{
+ SizeT inSize = *srcLen;
+ (*srcLen) = 0;
+ LzmaDec_WriteRem(p, dicLimit);
+
+ *status = LZMA_STATUS_NOT_SPECIFIED;
+
+ while (p->remainLen != kMatchSpecLenStart)
+ {
+ int checkEndMarkNow;
+
+ if (p->needFlush != 0)
+ {
+ for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--)
+ p->tempBuf[p->tempBufSize++] = *src++;
+ if (p->tempBufSize < RC_INIT_SIZE)
+ {
+ *status = LZMA_STATUS_NEEDS_MORE_INPUT;
+ return SZ_OK;
+ }
+ if (p->tempBuf[0] != 0)
+ return SZ_ERROR_DATA;
+
+ LzmaDec_InitRc(p, p->tempBuf);
+ p->tempBufSize = 0;
+ }
+
+ checkEndMarkNow = 0;
+ if (p->dicPos >= dicLimit)
+ {
+ if (p->remainLen == 0 && p->code == 0)
+ {
+ *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK;
+ return SZ_OK;
+ }
+ if (finishMode == LZMA_FINISH_ANY)
+ {
+ *status = LZMA_STATUS_NOT_FINISHED;
+ return SZ_OK;
+ }
+ if (p->remainLen != 0)
+ {
+ *status = LZMA_STATUS_NOT_FINISHED;
+ return SZ_ERROR_DATA;
+ }
+ checkEndMarkNow = 1;
+ }
+
+ if (p->needInitState)
+ LzmaDec_InitStateReal(p);
+
+ if (p->tempBufSize == 0)
+ {
+ SizeT processed;
+ const Byte *bufLimit;
+ if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
+ {
+ int dummyRes = LzmaDec_TryDummy(p, src, inSize);
+ if (dummyRes == DUMMY_ERROR)
+ {
+ memcpy(p->tempBuf, src, inSize);
+ p->tempBufSize = (unsigned)inSize;
+ (*srcLen) += inSize;
+ *status = LZMA_STATUS_NEEDS_MORE_INPUT;
+ return SZ_OK;
+ }
+ if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
+ {
+ *status = LZMA_STATUS_NOT_FINISHED;
+ return SZ_ERROR_DATA;
+ }
+ bufLimit = src;
+ }
+ else
+ bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX;
+ p->buf = src;
+ if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0)
+ return SZ_ERROR_DATA;
+ processed = (SizeT)(p->buf - src);
+ (*srcLen) += processed;
+ src += processed;
+ inSize -= processed;
+ }
+ else
+ {
+ unsigned rem = p->tempBufSize, lookAhead = 0;
+ while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize)
+ p->tempBuf[rem++] = src[lookAhead++];
+ p->tempBufSize = rem;
+ if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
+ {
+ int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem);
+ if (dummyRes == DUMMY_ERROR)
+ {
+ (*srcLen) += lookAhead;
+ *status = LZMA_STATUS_NEEDS_MORE_INPUT;
+ return SZ_OK;
+ }
+ if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
+ {
+ *status = LZMA_STATUS_NOT_FINISHED;
+ return SZ_ERROR_DATA;
+ }
+ }
+ p->buf = p->tempBuf;
+ if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0)
+ return SZ_ERROR_DATA;
+ lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf));
+ (*srcLen) += lookAhead;
+ src += lookAhead;
+ inSize -= lookAhead;
+ p->tempBufSize = 0;
+ }
+ }
+ if (p->code == 0)
+ *status = LZMA_STATUS_FINISHED_WITH_MARK;
+ return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
+}
+
+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
+{
+ SizeT outSize = *destLen;
+ SizeT inSize = *srcLen;
+ *srcLen = *destLen = 0;
+ for (;;)
+ {
+ SizeT inSizeCur = inSize, outSizeCur, dicPos;
+ ELzmaFinishMode curFinishMode;
+ SRes res;
+ if (p->dicPos == p->dicBufSize)
+ p->dicPos = 0;
+ dicPos = p->dicPos;
+ if (outSize > p->dicBufSize - dicPos)
+ {
+ outSizeCur = p->dicBufSize;
+ curFinishMode = LZMA_FINISH_ANY;
+ }
+ else
+ {
+ outSizeCur = dicPos + outSize;
+ curFinishMode = finishMode;
+ }
+
+ res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
+ src += inSizeCur;
+ inSize -= inSizeCur;
+ *srcLen += inSizeCur;
+ outSizeCur = p->dicPos - dicPos;
+ memcpy(dest, p->dic + dicPos, outSizeCur);
+ dest += outSizeCur;
+ outSize -= outSizeCur;
+ *destLen += outSizeCur;
+ if (res != 0)
+ return res;
+ if (outSizeCur == 0 || outSize == 0)
+ return SZ_OK;
+ }
+}
+
+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
+{
+ alloc->Free(alloc, p->probs);
+ p->probs = 0;
+}
+
+static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
+{
+ alloc->Free(alloc, p->dic);
+ p->dic = 0;
+}
+
+void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
+{
+ LzmaDec_FreeProbs(p, alloc);
+ LzmaDec_FreeDict(p, alloc);
+}
+
+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
+{
+ UInt32 dicSize;
+ Byte d;
+
+ if (size < LZMA_PROPS_SIZE)
+ return SZ_ERROR_UNSUPPORTED;
+ else
+ dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24);
+
+ if (dicSize < LZMA_DIC_MIN)
+ dicSize = LZMA_DIC_MIN;
+ p->dicSize = dicSize;
+
+ d = data[0];
+ if (d >= (9 * 5 * 5))
+ return SZ_ERROR_UNSUPPORTED;
+
+ p->lc = d % 9;
+ d /= 9;
+ p->pb = d / 5;
+ p->lp = d % 5;
+
+ return SZ_OK;
+}
+
+static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc)
+{
+ UInt32 numProbs = LzmaProps_GetNumProbs(propNew);
+ if (p->probs == 0 || numProbs != p->numProbs)
+ {
+ LzmaDec_FreeProbs(p, alloc);
+ p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb));
+ p->numProbs = numProbs;
+ if (p->probs == 0)
+ return SZ_ERROR_MEM;
+ }
+ return SZ_OK;
+}
+
+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
+{
+ CLzmaProps propNew;
+ RINOK(LzmaProps_Decode(&propNew, props, propsSize));
+ RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
+ p->prop = propNew;
+ return SZ_OK;
+}
+
+SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
+{
+ CLzmaProps propNew;
+ SizeT dicBufSize;
+ RINOK(LzmaProps_Decode(&propNew, props, propsSize));
+ RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
+ dicBufSize = propNew.dicSize;
+ if (p->dic == 0 || dicBufSize != p->dicBufSize)
+ {
+ LzmaDec_FreeDict(p, alloc);
+ p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
+ if (p->dic == 0)
+ {
+ LzmaDec_FreeProbs(p, alloc);
+ return SZ_ERROR_MEM;
+ }
+ }
+ p->dicBufSize = dicBufSize;
+ p->prop = propNew;
+ return SZ_OK;
+}
+
+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
+ const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
+ ELzmaStatus *status, ISzAlloc *alloc)
+{
+ CLzmaDec p;
+ SRes res;
+ SizeT inSize = *srcLen;
+ SizeT outSize = *destLen;
+ *srcLen = *destLen = 0;
+ if (inSize < RC_INIT_SIZE)
+ return SZ_ERROR_INPUT_EOF;
+
+ LzmaDec_Construct(&p);
+ res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc);
+ if (res != 0)
+ return res;
+ p.dic = dest;
+ p.dicBufSize = outSize;
+
+ LzmaDec_Init(&p);
+
+ *srcLen = inSize;
+ res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status);
+
+ if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT)
+ res = SZ_ERROR_INPUT_EOF;
+
+ (*destLen) = p.dicPos;
+ LzmaDec_FreeProbs(&p, alloc);
+ return res;
+}
+
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/LzmaDec.h b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/LzmaDec.h
new file mode 100644
index 0000000000..ad7d7057a4
--- /dev/null
+++ b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/LzmaDec.h
@@ -0,0 +1,223 @@
+/* LzmaDec.h -- LZMA Decoder
+2008-10-04 : Igor Pavlov : Public domain */
+
+#ifndef __LZMADEC_H
+#define __LZMADEC_H
+
+#include "Types.h"
+
+/* #define _LZMA_PROB32 */
+/* _LZMA_PROB32 can increase the speed on some CPUs,
+ but memory usage for CLzmaDec::probs will be doubled in that case */
+
+#ifdef _LZMA_PROB32
+#define CLzmaProb UInt32
+#else
+#define CLzmaProb UInt16
+#endif
+
+
+/* ---------- LZMA Properties ---------- */
+
+#define LZMA_PROPS_SIZE 5
+
+typedef struct _CLzmaProps
+{
+ unsigned lc, lp, pb;
+ UInt32 dicSize;
+} CLzmaProps;
+
+/* LzmaProps_Decode - decodes properties
+Returns:
+ SZ_OK
+ SZ_ERROR_UNSUPPORTED - Unsupported properties
+*/
+
+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
+
+
+/* ---------- LZMA Decoder state ---------- */
+
+/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
+ Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
+
+#define LZMA_REQUIRED_INPUT_MAX 20
+
+typedef struct
+{
+ CLzmaProps prop;
+ CLzmaProb *probs;
+ Byte *dic;
+ const Byte *buf;
+ UInt32 range, code;
+ SizeT dicPos;
+ SizeT dicBufSize;
+ UInt32 processedPos;
+ UInt32 checkDicSize;
+ unsigned state;
+ UInt32 reps[4];
+ unsigned remainLen;
+ int needFlush;
+ int needInitState;
+ UInt32 numProbs;
+ unsigned tempBufSize;
+ Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
+} CLzmaDec;
+
+#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
+
+void LzmaDec_Init(CLzmaDec *p);
+
+/* There are two types of LZMA streams:
+ 0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
+ 1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
+
+typedef enum
+{
+ LZMA_FINISH_ANY, /* finish at any point */
+ LZMA_FINISH_END /* block must be finished at the end */
+} ELzmaFinishMode;
+
+/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
+
+ You must use LZMA_FINISH_END, when you know that current output buffer
+ covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
+
+ If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
+ and output value of destLen will be less than output buffer size limit.
+ You can check status result also.
+
+ You can use multiple checks to test data integrity after full decompression:
+ 1) Check Result and "status" variable.
+ 2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
+ 3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
+ You must use correct finish mode in that case. */
+
+typedef enum
+{
+ LZMA_STATUS_NOT_SPECIFIED, /* use main error code instead */
+ LZMA_STATUS_FINISHED_WITH_MARK, /* stream was finished with end mark. */
+ LZMA_STATUS_NOT_FINISHED, /* stream was not finished */
+ LZMA_STATUS_NEEDS_MORE_INPUT, /* you must provide more input bytes */
+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK /* there is probability that stream was finished without end mark */
+} ELzmaStatus;
+
+/* ELzmaStatus is used only as output value for function call */
+
+
+/* ---------- Interfaces ---------- */
+
+/* There are 3 levels of interfaces:
+ 1) Dictionary Interface
+ 2) Buffer Interface
+ 3) One Call Interface
+ You can select any of these interfaces, but don't mix functions from different
+ groups for same object. */
+
+
+/* There are two variants to allocate state for Dictionary Interface:
+ 1) LzmaDec_Allocate / LzmaDec_Free
+ 2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
+ You can use variant 2, if you set dictionary buffer manually.
+ For Buffer Interface you must always use variant 1.
+
+LzmaDec_Allocate* can return:
+ SZ_OK
+ SZ_ERROR_MEM - Memory allocation error
+ SZ_ERROR_UNSUPPORTED - Unsupported properties
+*/
+
+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
+
+SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
+void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
+
+/* ---------- Dictionary Interface ---------- */
+
+/* You can use it, if you want to eliminate the overhead for data copying from
+ dictionary to some other external buffer.
+ You must work with CLzmaDec variables directly in this interface.
+
+ STEPS:
+ LzmaDec_Constr()
+ LzmaDec_Allocate()
+ for (each new stream)
+ {
+ LzmaDec_Init()
+ while (it needs more decompression)
+ {
+ LzmaDec_DecodeToDic()
+ use data from CLzmaDec::dic and update CLzmaDec::dicPos
+ }
+ }
+ LzmaDec_Free()
+*/
+
+/* LzmaDec_DecodeToDic
+
+ The decoding to internal dictionary buffer (CLzmaDec::dic).
+ You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
+
+finishMode:
+ It has meaning only if the decoding reaches output limit (dicLimit).
+ LZMA_FINISH_ANY - Decode just dicLimit bytes.
+ LZMA_FINISH_END - Stream must be finished after dicLimit.
+
+Returns:
+ SZ_OK
+ status:
+ LZMA_STATUS_FINISHED_WITH_MARK
+ LZMA_STATUS_NOT_FINISHED
+ LZMA_STATUS_NEEDS_MORE_INPUT
+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
+ SZ_ERROR_DATA - Data error
+*/
+
+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
+ const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
+
+
+/* ---------- Buffer Interface ---------- */
+
+/* It's zlib-like interface.
+ See LzmaDec_DecodeToDic description for information about STEPS and return results,
+ but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
+ to work with CLzmaDec variables manually.
+
+finishMode:
+ It has meaning only if the decoding reaches output limit (*destLen).
+ LZMA_FINISH_ANY - Decode just destLen bytes.
+ LZMA_FINISH_END - Stream must be finished after (*destLen).
+*/
+
+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
+ const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
+
+
+/* ---------- One Call Interface ---------- */
+
+/* LzmaDecode
+
+finishMode:
+ It has meaning only if the decoding reaches output limit (*destLen).
+ LZMA_FINISH_ANY - Decode just destLen bytes.
+ LZMA_FINISH_END - Stream must be finished after (*destLen).
+
+Returns:
+ SZ_OK
+ status:
+ LZMA_STATUS_FINISHED_WITH_MARK
+ LZMA_STATUS_NOT_FINISHED
+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
+ SZ_ERROR_DATA - Data error
+ SZ_ERROR_MEM - Memory allocation error
+ SZ_ERROR_UNSUPPORTED - Unsupported properties
+ SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
+*/
+
+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
+ const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
+ ELzmaStatus *status, ISzAlloc *alloc);
+
+#endif
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/Types.h b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/Types.h
new file mode 100644
index 0000000000..30b16e3bb0
--- /dev/null
+++ b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/C/Types.h
@@ -0,0 +1,231 @@
+/** @file
+ Types.h
+
+ Based on LZMA SDK 4.65:
+ Types.h -- Basic types
+ 2008-11-23 : Igor Pavlov : Public domain
+
+ Copyright (c) 2009, Intel Corporation. All rights reserved.
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __7Z_TYPES_H
+#define __7Z_TYPES_H
+
+#ifdef EFIAPI
+
+#include "UefiLzma.h"
+
+#else
+
+#include
+
+#ifdef _WIN32
+#include
+#endif
+
+#endif
+
+#define SZ_OK 0
+
+#define SZ_ERROR_DATA 1
+#define SZ_ERROR_MEM 2
+#define SZ_ERROR_CRC 3
+#define SZ_ERROR_UNSUPPORTED 4
+#define SZ_ERROR_PARAM 5
+#define SZ_ERROR_INPUT_EOF 6
+#define SZ_ERROR_OUTPUT_EOF 7
+#define SZ_ERROR_READ 8
+#define SZ_ERROR_WRITE 9
+#define SZ_ERROR_PROGRESS 10
+#define SZ_ERROR_FAIL 11
+#define SZ_ERROR_THREAD 12
+
+#define SZ_ERROR_ARCHIVE 16
+#define SZ_ERROR_NO_ARCHIVE 17
+
+typedef int SRes;
+
+#ifdef _WIN32
+typedef DWORD WRes;
+#else
+typedef int WRes;
+#endif
+
+#ifndef RINOK
+#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; }
+#endif
+
+typedef unsigned char Byte;
+typedef short Int16;
+typedef unsigned short UInt16;
+
+#ifdef _LZMA_UINT32_IS_ULONG
+typedef long Int32;
+typedef unsigned long UInt32;
+#else
+typedef int Int32;
+typedef unsigned int UInt32;
+#endif
+
+#ifdef _SZ_NO_INT_64
+
+/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers.
+ NOTES: Some code will work incorrectly in that case! */
+
+typedef long Int64;
+typedef unsigned long UInt64;
+
+#else
+
+#if defined(_MSC_VER) || defined(__BORLANDC__)
+typedef __int64 Int64;
+typedef unsigned __int64 UInt64;
+#else
+typedef long long int Int64;
+typedef unsigned long long int UInt64;
+#endif
+
+#endif
+
+#ifdef _LZMA_NO_SYSTEM_SIZE_T
+typedef UInt32 SizeT;
+#else
+typedef size_t SizeT;
+#endif
+
+typedef int Bool;
+#define True 1
+#define False 0
+
+
+#ifdef _MSC_VER
+
+#if _MSC_VER >= 1300
+#define MY_NO_INLINE __declspec(noinline)
+#else
+#define MY_NO_INLINE
+#endif
+
+#define MY_CDECL __cdecl
+#define MY_STD_CALL __stdcall
+#define MY_FAST_CALL MY_NO_INLINE __fastcall
+
+#else
+
+#define MY_CDECL
+#define MY_STD_CALL
+#define MY_FAST_CALL
+
+#endif
+
+
+/* The following interfaces use first parameter as pointer to structure */
+
+typedef struct
+{
+ SRes (*Read)(void *p, void *buf, size_t *size);
+ /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
+ (output(*size) < input(*size)) is allowed */
+} ISeqInStream;
+
+/* it can return SZ_ERROR_INPUT_EOF */
+SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size);
+SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType);
+SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf);
+
+typedef struct
+{
+ size_t (*Write)(void *p, const void *buf, size_t size);
+ /* Returns: result - the number of actually written bytes.
+ (result < size) means error */
+} ISeqOutStream;
+
+typedef enum
+{
+ SZ_SEEK_SET = 0,
+ SZ_SEEK_CUR = 1,
+ SZ_SEEK_END = 2
+} ESzSeek;
+
+typedef struct
+{
+ SRes (*Read)(void *p, void *buf, size_t *size); /* same as ISeqInStream::Read */
+ SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
+} ISeekInStream;
+
+typedef struct
+{
+ SRes (*Look)(void *p, void **buf, size_t *size);
+ /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
+ (output(*size) > input(*size)) is not allowed
+ (output(*size) < input(*size)) is allowed */
+ SRes (*Skip)(void *p, size_t offset);
+ /* offset must be <= output(*size) of Look */
+
+ SRes (*Read)(void *p, void *buf, size_t *size);
+ /* reads directly (without buffer). It's same as ISeqInStream::Read */
+ SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
+} ILookInStream;
+
+SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size);
+SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset);
+
+/* reads via ILookInStream::Read */
+SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType);
+SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size);
+
+#define LookToRead_BUF_SIZE (1 << 14)
+
+typedef struct
+{
+ ILookInStream s;
+ ISeekInStream *realStream;
+ size_t pos;
+ size_t size;
+ Byte buf[LookToRead_BUF_SIZE];
+} CLookToRead;
+
+void LookToRead_CreateVTable(CLookToRead *p, int lookahead);
+void LookToRead_Init(CLookToRead *p);
+
+typedef struct
+{
+ ISeqInStream s;
+ ILookInStream *realStream;
+} CSecToLook;
+
+void SecToLook_CreateVTable(CSecToLook *p);
+
+typedef struct
+{
+ ISeqInStream s;
+ ILookInStream *realStream;
+} CSecToRead;
+
+void SecToRead_CreateVTable(CSecToRead *p);
+
+typedef struct
+{
+ SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize);
+ /* Returns: result. (result != SZ_OK) means break.
+ Value (UInt64)(Int64)-1 for size means unknown value. */
+} ICompressProgress;
+
+typedef struct
+{
+ void *(*Alloc)(void *p, size_t size);
+ void (*Free)(void *p, void *address); /* address can be 0 */
+} ISzAlloc;
+
+#define IAlloc_Alloc(p, size) (p)->Alloc((p), size)
+#define IAlloc_Free(p, a) (p)->Free((p), a)
+
+#endif
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/history.txt b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/history.txt
new file mode 100644
index 0000000000..9bed5ebbef
--- /dev/null
+++ b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/history.txt
@@ -0,0 +1,236 @@
+HISTORY of the LZMA SDK
+-----------------------
+
+4.65 2009-02-03
+-------------------------
+- Some minor fixes
+
+
+4.63 2008-12-31
+-------------------------
+- Some minor fixes
+
+
+4.61 beta 2008-11-23
+-------------------------
+- The bug in ANSI-C LZMA Decoder was fixed:
+ If encoded stream was corrupted, decoder could access memory
+ outside of allocated range.
+- Some changes in ANSI-C 7z Decoder interfaces.
+- LZMA SDK is placed in the public domain.
+
+
+4.60 beta 2008-08-19
+-------------------------
+- Some minor fixes.
+
+
+4.59 beta 2008-08-13
+-------------------------
+- The bug was fixed:
+ LZMA Encoder in fast compression mode could access memory outside of
+ allocated range in some rare cases.
+
+
+4.58 beta 2008-05-05
+-------------------------
+- ANSI-C LZMA Decoder was rewritten for speed optimizations.
+- ANSI-C LZMA Encoder was included to LZMA SDK.
+- C++ LZMA code now is just wrapper over ANSI-C code.
+
+
+4.57 2007-12-12
+-------------------------
+- Speed optimizations in Ñ++ LZMA Decoder.
+- Small changes for more compatibility with some C/C++ compilers.
+
+
+4.49 beta 2007-07-05
+-------------------------
+- .7z ANSI-C Decoder:
+ - now it supports BCJ and BCJ2 filters
+ - now it supports files larger than 4 GB.
+ - now it supports "Last Write Time" field for files.
+- C++ code for .7z archives compressing/decompressing from 7-zip
+ was included to LZMA SDK.
+
+
+4.43 2006-06-04
+-------------------------
+- Small changes for more compatibility with some C/C++ compilers.
+
+
+4.42 2006-05-15
+-------------------------
+- Small changes in .h files in ANSI-C version.
+
+
+4.39 beta 2006-04-14
+-------------------------
+- The bug in versions 4.33b:4.38b was fixed:
+ C++ version of LZMA encoder could not correctly compress
+ files larger than 2 GB with HC4 match finder (-mfhc4).
+
+
+4.37 beta 2005-04-06
+-------------------------
+- Fixes in C++ code: code could no be compiled if _NO_EXCEPTIONS was defined.
+
+
+4.35 beta 2005-03-02
+-------------------------
+- The bug was fixed in C++ version of LZMA Decoder:
+ If encoded stream was corrupted, decoder could access memory
+ outside of allocated range.
+
+
+4.34 beta 2006-02-27
+-------------------------
+- Compressing speed and memory requirements for compressing were increased
+- LZMA now can use only these match finders: HC4, BT2, BT3, BT4
+
+
+4.32 2005-12-09
+-------------------------
+- Java version of LZMA SDK was included
+
+
+4.30 2005-11-20
+-------------------------
+- Compression ratio was improved in -a2 mode
+- Speed optimizations for compressing in -a2 mode
+- -fb switch now supports values up to 273
+- The bug in 7z_C (7zIn.c) was fixed:
+ It used Alloc/Free functions from different memory pools.
+ So if program used two memory pools, it worked incorrectly.
+- 7z_C: .7z format supporting was improved
+- LZMA# SDK (C#.NET version) was included
+
+
+4.27 (Updated) 2005-09-21
+-------------------------
+- Some GUIDs/interfaces in C++ were changed.
+ IStream.h:
+ ISequentialInStream::Read now works as old ReadPart
+ ISequentialOutStream::Write now works as old WritePart
+
+
+4.27 2005-08-07
+-------------------------
+- The bug in LzmaDecodeSize.c was fixed:
+ if _LZMA_IN_CB and _LZMA_OUT_READ were defined,
+ decompressing worked incorrectly.
+
+
+4.26 2005-08-05
+-------------------------
+- Fixes in 7z_C code and LzmaTest.c:
+ previous versions could work incorrectly,
+ if malloc(0) returns 0
+
+
+4.23 2005-06-29
+-------------------------
+- Small fixes in C++ code
+
+
+4.22 2005-06-10
+-------------------------
+- Small fixes
+
+
+4.21 2005-06-08
+-------------------------
+- Interfaces for ANSI-C LZMA Decoder (LzmaDecode.c) were changed
+- New additional version of ANSI-C LZMA Decoder with zlib-like interface:
+ - LzmaStateDecode.h
+ - LzmaStateDecode.c
+ - LzmaStateTest.c
+- ANSI-C LZMA Decoder now can decompress files larger than 4 GB
+
+
+4.17 2005-04-18
+-------------------------
+- New example for RAM->RAM compressing/decompressing:
+ LZMA + BCJ (filter for x86 code):
+ - LzmaRam.h
+ - LzmaRam.cpp
+ - LzmaRamDecode.h
+ - LzmaRamDecode.c
+ - -f86 switch for lzma.exe
+
+
+4.16 2005-03-29
+-------------------------
+- The bug was fixed in LzmaDecode.c (ANSI-C LZMA Decoder):
+ If _LZMA_OUT_READ was defined, and if encoded stream was corrupted,
+ decoder could access memory outside of allocated range.
+- Speed optimization of ANSI-C LZMA Decoder (now it's about 20% faster).
+ Old version of LZMA Decoder now is in file LzmaDecodeSize.c.
+ LzmaDecodeSize.c can provide slightly smaller code than LzmaDecode.c
+- Small speed optimization in LZMA C++ code
+- filter for SPARC's code was added
+- Simplified version of .7z ANSI-C Decoder was included
+
+
+4.06 2004-09-05
+-------------------------
+- The bug in v4.05 was fixed:
+ LZMA-Encoder didn't release output stream in some cases.
+
+
+4.05 2004-08-25
+-------------------------
+- Source code of filters for x86, IA-64, ARM, ARM-Thumb
+ and PowerPC code was included to SDK
+- Some internal minor changes
+
+
+4.04 2004-07-28
+-------------------------
+- More compatibility with some C++ compilers
+
+
+4.03 2004-06-18
+-------------------------
+- "Benchmark" command was added. It measures compressing
+ and decompressing speed and shows rating values.
+ Also it checks hardware errors.
+
+
+4.02 2004-06-10
+-------------------------
+- C++ LZMA Encoder/Decoder code now is more portable
+ and it can be compiled by GCC on Linux.
+
+
+4.01 2004-02-15
+-------------------------
+- Some detection of data corruption was enabled.
+ LzmaDecode.c / RangeDecoderReadByte
+ .....
+ {
+ rd->ExtraBytes = 1;
+ return 0xFF;
+ }
+
+
+4.00 2004-02-13
+-------------------------
+- Original version of LZMA SDK
+
+
+
+HISTORY of the LZMA
+-------------------
+ 2001-2008: Improvements to LZMA compressing/decompressing code,
+ keeping compatibility with original LZMA format
+ 1996-2001: Development of LZMA compression format
+
+ Some milestones:
+
+ 2001-08-30: LZMA compression was added to 7-Zip
+ 1999-01-02: First version of 7-Zip was released
+
+
+End of document
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/lzma.txt b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/lzma.txt
new file mode 100644
index 0000000000..d4f4af929a
--- /dev/null
+++ b/MdeModulePkg/Library/LzmaCustomDecompressLib/Sdk/lzma.txt
@@ -0,0 +1,594 @@
+LZMA SDK 4.65
+-------------
+
+LZMA SDK provides the documentation, samples, header files, libraries,
+and tools you need to develop applications that use LZMA compression.
+
+LZMA is default and general compression method of 7z format
+in 7-Zip compression program (www.7-zip.org). LZMA provides high
+compression ratio and very fast decompression.
+
+LZMA is an improved version of famous LZ77 compression algorithm.
+It was improved in way of maximum increasing of compression ratio,
+keeping high decompression speed and low memory requirements for
+decompressing.
+
+
+
+LICENSE
+-------
+
+LZMA SDK is written and placed in the public domain by Igor Pavlov.
+
+
+LZMA SDK Contents
+-----------------
+
+LZMA SDK includes:
+
+ - ANSI-C/C++/C#/Java source code for LZMA compressing and decompressing
+ - Compiled file->file LZMA compressing/decompressing program for Windows system
+
+
+UNIX/Linux version
+------------------
+To compile C++ version of file->file LZMA encoding, go to directory
+C++/7zip/Compress/LZMA_Alone
+and call make to recompile it:
+ make -f makefile.gcc clean all
+
+In some UNIX/Linux versions you must compile LZMA with static libraries.
+To compile with static libraries, you can use
+LIB = -lm -static
+
+
+Files
+---------------------
+lzma.txt - LZMA SDK description (this file)
+7zFormat.txt - 7z Format description
+7zC.txt - 7z ANSI-C Decoder description
+methods.txt - Compression method IDs for .7z
+lzma.exe - Compiled file->file LZMA encoder/decoder for Windows
+history.txt - history of the LZMA SDK
+
+
+Source code structure
+---------------------
+
+C/ - C files
+ 7zCrc*.* - CRC code
+ Alloc.* - Memory allocation functions
+ Bra*.* - Filters for x86, IA-64, ARM, ARM-Thumb, PowerPC and SPARC code
+ LzFind.* - Match finder for LZ (LZMA) encoders
+ LzFindMt.* - Match finder for LZ (LZMA) encoders for multithreading encoding
+ LzHash.h - Additional file for LZ match finder
+ LzmaDec.* - LZMA decoding
+ LzmaEnc.* - LZMA encoding
+ LzmaLib.* - LZMA Library for DLL calling
+ Types.h - Basic types for another .c files
+ Threads.* - The code for multithreading.
+
+ LzmaLib - LZMA Library (.DLL for Windows)
+
+ LzmaUtil - LZMA Utility (file->file LZMA encoder/decoder).
+
+ Archive - files related to archiving
+ 7z - 7z ANSI-C Decoder
+
+CPP/ -- CPP files
+
+ Common - common files for C++ projects
+ Windows - common files for Windows related code
+
+ 7zip - files related to 7-Zip Project
+
+ Common - common files for 7-Zip
+
+ Compress - files related to compression/decompression
+
+ Copy - Copy coder
+ RangeCoder - Range Coder (special code of compression/decompression)
+ LZMA - LZMA compression/decompression on C++
+ LZMA_Alone - file->file LZMA compression/decompression
+ Branch - Filters for x86, IA-64, ARM, ARM-Thumb, PowerPC and SPARC code
+
+ Archive - files related to archiving
+
+ Common - common files for archive handling
+ 7z - 7z C++ Encoder/Decoder
+
+ Bundles - Modules that are bundles of other modules
+
+ Alone7z - 7zr.exe: Standalone version of 7z.exe that supports only 7z/LZMA/BCJ/BCJ2
+ Format7zR - 7zr.dll: Reduced version of 7za.dll: extracting/compressing to 7z/LZMA/BCJ/BCJ2
+ Format7zExtractR - 7zxr.dll: Reduced version of 7zxa.dll: extracting from 7z/LZMA/BCJ/BCJ2.
+
+ UI - User Interface files
+
+ Client7z - Test application for 7za.dll, 7zr.dll, 7zxr.dll
+ Common - Common UI files
+ Console - Code for console archiver
+
+
+
+CS/ - C# files
+ 7zip
+ Common - some common files for 7-Zip
+ Compress - files related to compression/decompression
+ LZ - files related to LZ (Lempel-Ziv) compression algorithm
+ LZMA - LZMA compression/decompression
+ LzmaAlone - file->file LZMA compression/decompression
+ RangeCoder - Range Coder (special code of compression/decompression)
+
+Java/ - Java files
+ SevenZip
+ Compression - files related to compression/decompression
+ LZ - files related to LZ (Lempel-Ziv) compression algorithm
+ LZMA - LZMA compression/decompression
+ RangeCoder - Range Coder (special code of compression/decompression)
+
+
+C/C++ source code of LZMA SDK is part of 7-Zip project.
+7-Zip source code can be downloaded from 7-Zip's SourceForge page:
+
+ http://sourceforge.net/projects/sevenzip/
+
+
+
+LZMA features
+-------------
+ - Variable dictionary size (up to 1 GB)
+ - Estimated compressing speed: about 2 MB/s on 2 GHz CPU
+ - Estimated decompressing speed:
+ - 20-30 MB/s on 2 GHz Core 2 or AMD Athlon 64
+ - 1-2 MB/s on 200 MHz ARM, MIPS, PowerPC or other simple RISC
+ - Small memory requirements for decompressing (16 KB + DictionarySize)
+ - Small code size for decompressing: 5-8 KB
+
+LZMA decoder uses only integer operations and can be
+implemented in any modern 32-bit CPU (or on 16-bit CPU with some conditions).
+
+Some critical operations that affect the speed of LZMA decompression:
+ 1) 32*16 bit integer multiply
+ 2) Misspredicted branches (penalty mostly depends from pipeline length)
+ 3) 32-bit shift and arithmetic operations
+
+The speed of LZMA decompressing mostly depends from CPU speed.
+Memory speed has no big meaning. But if your CPU has small data cache,
+overall weight of memory speed will slightly increase.
+
+
+How To Use
+----------
+
+Using LZMA encoder/decoder executable
+--------------------------------------
+
+Usage: LZMA inputFile outputFile [...]
+
+ e: encode file
+
+ d: decode file
+
+ b: Benchmark. There are two tests: compressing and decompressing
+ with LZMA method. Benchmark shows rating in MIPS (million
+ instructions per second). Rating value is calculated from
+ measured speed and it is normalized with Intel's Core 2 results.
+ Also Benchmark checks possible hardware errors (RAM
+ errors in most cases). Benchmark uses these settings:
+ (-a1, -d21, -fb32, -mfbt4). You can change only -d parameter.
+ Also you can change the number of iterations. Example for 30 iterations:
+ LZMA b 30
+ Default number of iterations is 10.
+
+
+
+
+ -a{N}: set compression mode 0 = fast, 1 = normal
+ default: 1 (normal)
+
+ d{N}: Sets Dictionary size - [0, 30], default: 23 (8MB)
+ The maximum value for dictionary size is 1 GB = 2^30 bytes.
+ Dictionary size is calculated as DictionarySize = 2^N bytes.
+ For decompressing file compressed by LZMA method with dictionary
+ size D = 2^N you need about D bytes of memory (RAM).
+
+ -fb{N}: set number of fast bytes - [5, 273], default: 128
+ Usually big number gives a little bit better compression ratio
+ and slower compression process.
+
+ -lc{N}: set number of literal context bits - [0, 8], default: 3
+ Sometimes lc=4 gives gain for big files.
+
+ -lp{N}: set number of literal pos bits - [0, 4], default: 0
+ lp switch is intended for periodical data when period is
+ equal 2^N. For example, for 32-bit (4 bytes)
+ periodical data you can use lp=2. Often it's better to set lc0,
+ if you change lp switch.
+
+ -pb{N}: set number of pos bits - [0, 4], default: 2
+ pb switch is intended for periodical data
+ when period is equal 2^N.
+
+ -mf{MF_ID}: set Match Finder. Default: bt4.
+ Algorithms from hc* group doesn't provide good compression
+ ratio, but they often works pretty fast in combination with
+ fast mode (-a0).
+
+ Memory requirements depend from dictionary size
+ (parameter "d" in table below).
+
+ MF_ID Memory Description
+
+ bt2 d * 9.5 + 4MB Binary Tree with 2 bytes hashing.
+ bt3 d * 11.5 + 4MB Binary Tree with 3 bytes hashing.
+ bt4 d * 11.5 + 4MB Binary Tree with 4 bytes hashing.
+ hc4 d * 7.5 + 4MB Hash Chain with 4 bytes hashing.
+
+ -eos: write End Of Stream marker. By default LZMA doesn't write
+ eos marker, since LZMA decoder knows uncompressed size
+ stored in .lzma file header.
+
+ -si: Read data from stdin (it will write End Of Stream marker).
+ -so: Write data to stdout
+
+
+Examples:
+
+1) LZMA e file.bin file.lzma -d16 -lc0
+
+compresses file.bin to file.lzma with 64 KB dictionary (2^16=64K)
+and 0 literal context bits. -lc0 allows to reduce memory requirements
+for decompression.
+
+
+2) LZMA e file.bin file.lzma -lc0 -lp2
+
+compresses file.bin to file.lzma with settings suitable
+for 32-bit periodical data (for example, ARM or MIPS code).
+
+3) LZMA d file.lzma file.bin
+
+decompresses file.lzma to file.bin.
+
+
+Compression ratio hints
+-----------------------
+
+Recommendations
+---------------
+
+To increase the compression ratio for LZMA compressing it's desirable
+to have aligned data (if it's possible) and also it's desirable to locate
+data in such order, where code is grouped in one place and data is
+grouped in other place (it's better than such mixing: code, data, code,
+data, ...).
+
+
+Filters
+-------
+You can increase the compression ratio for some data types, using
+special filters before compressing. For example, it's possible to
+increase the compression ratio on 5-10% for code for those CPU ISAs:
+x86, IA-64, ARM, ARM-Thumb, PowerPC, SPARC.
+
+You can find C source code of such filters in C/Bra*.* files
+
+You can check the compression ratio gain of these filters with such
+7-Zip commands (example for ARM code):
+No filter:
+ 7z a a1.7z a.bin -m0=lzma
+
+With filter for little-endian ARM code:
+ 7z a a2.7z a.bin -m0=arm -m1=lzma
+
+It works in such manner:
+Compressing = Filter_encoding + LZMA_encoding
+Decompressing = LZMA_decoding + Filter_decoding
+
+Compressing and decompressing speed of such filters is very high,
+so it will not increase decompressing time too much.
+Moreover, it reduces decompression time for LZMA_decoding,
+since compression ratio with filtering is higher.
+
+These filters convert CALL (calling procedure) instructions
+from relative offsets to absolute addresses, so such data becomes more
+compressible.
+
+For some ISAs (for example, for MIPS) it's impossible to get gain from such filter.
+
+
+LZMA compressed file format
+---------------------------
+Offset Size Description
+ 0 1 Special LZMA properties (lc,lp, pb in encoded form)
+ 1 4 Dictionary size (little endian)
+ 5 8 Uncompressed size (little endian). -1 means unknown size
+ 13 Compressed data
+
+
+ANSI-C LZMA Decoder
+~~~~~~~~~~~~~~~~~~~
+
+Please note that interfaces for ANSI-C code were changed in LZMA SDK 4.58.
+If you want to use old interfaces you can download previous version of LZMA SDK
+from sourceforge.net site.
+
+To use ANSI-C LZMA Decoder you need the following files:
+1) LzmaDec.h + LzmaDec.c + Types.h
+LzmaUtil/LzmaUtil.c is example application that uses these files.
+
+
+Memory requirements for LZMA decoding
+-------------------------------------
+
+Stack usage of LZMA decoding function for local variables is not
+larger than 200-400 bytes.
+
+LZMA Decoder uses dictionary buffer and internal state structure.
+Internal state structure consumes
+ state_size = (4 + (1.5 << (lc + lp))) KB
+by default (lc=3, lp=0), state_size = 16 KB.
+
+
+How To decompress data
+----------------------
+
+LZMA Decoder (ANSI-C version) now supports 2 interfaces:
+1) Single-call Decompressing
+2) Multi-call State Decompressing (zlib-like interface)
+
+You must use external allocator:
+Example:
+void *SzAlloc(void *p, size_t size) { p = p; return malloc(size); }
+void SzFree(void *p, void *address) { p = p; free(address); }
+ISzAlloc alloc = { SzAlloc, SzFree };
+
+You can use p = p; operator to disable compiler warnings.
+
+
+Single-call Decompressing
+-------------------------
+When to use: RAM->RAM decompressing
+Compile files: LzmaDec.h + LzmaDec.c + Types.h
+Compile defines: no defines
+Memory Requirements:
+ - Input buffer: compressed size
+ - Output buffer: uncompressed size
+ - LZMA Internal Structures: state_size (16 KB for default settings)
+
+Interface:
+ int LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
+ const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
+ ELzmaStatus *status, ISzAlloc *alloc);
+ In:
+ dest - output data
+ destLen - output data size
+ src - input data
+ srcLen - input data size
+ propData - LZMA properties (5 bytes)
+ propSize - size of propData buffer (5 bytes)
+ finishMode - It has meaning only if the decoding reaches output limit (*destLen).
+ LZMA_FINISH_ANY - Decode just destLen bytes.
+ LZMA_FINISH_END - Stream must be finished after (*destLen).
+ You can use LZMA_FINISH_END, when you know that
+ current output buffer covers last bytes of stream.
+ alloc - Memory allocator.
+
+ Out:
+ destLen - processed output size
+ srcLen - processed input size
+
+ Output:
+ SZ_OK
+ status:
+ LZMA_STATUS_FINISHED_WITH_MARK
+ LZMA_STATUS_NOT_FINISHED
+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
+ SZ_ERROR_DATA - Data error
+ SZ_ERROR_MEM - Memory allocation error
+ SZ_ERROR_UNSUPPORTED - Unsupported properties
+ SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
+
+ If LZMA decoder sees end_marker before reaching output limit, it returns OK result,
+ and output value of destLen will be less than output buffer size limit.
+
+ You can use multiple checks to test data integrity after full decompression:
+ 1) Check Result and "status" variable.
+ 2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
+ 3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
+ You must use correct finish mode in that case. */
+
+
+Multi-call State Decompressing (zlib-like interface)
+----------------------------------------------------
+
+When to use: file->file decompressing
+Compile files: LzmaDec.h + LzmaDec.c + Types.h
+
+Memory Requirements:
+ - Buffer for input stream: any size (for example, 16 KB)
+ - Buffer for output stream: any size (for example, 16 KB)
+ - LZMA Internal Structures: state_size (16 KB for default settings)
+ - LZMA dictionary (dictionary size is encoded in LZMA properties header)
+
+1) read LZMA properties (5 bytes) and uncompressed size (8 bytes, little-endian) to header:
+ unsigned char header[LZMA_PROPS_SIZE + 8];
+ ReadFile(inFile, header, sizeof(header)
+
+2) Allocate CLzmaDec structures (state + dictionary) using LZMA properties
+
+ CLzmaDec state;
+ LzmaDec_Constr(&state);
+ res = LzmaDec_Allocate(&state, header, LZMA_PROPS_SIZE, &g_Alloc);
+ if (res != SZ_OK)
+ return res;
+
+3) Init LzmaDec structure before any new LZMA stream. And call LzmaDec_DecodeToBuf in loop
+
+ LzmaDec_Init(&state);
+ for (;;)
+ {
+ ...
+ int res = LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
+ const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode);
+ ...
+ }
+
+
+4) Free all allocated structures
+ LzmaDec_Free(&state, &g_Alloc);
+
+For full code example, look at C/LzmaUtil/LzmaUtil.c code.
+
+
+How To compress data
+--------------------
+
+Compile files: LzmaEnc.h + LzmaEnc.c + Types.h +
+LzFind.c + LzFind.h + LzFindMt.c + LzFindMt.h + LzHash.h
+
+Memory Requirements:
+ - (dictSize * 11.5 + 6 MB) + state_size
+
+Lzma Encoder can use two memory allocators:
+1) alloc - for small arrays.
+2) allocBig - for big arrays.
+
+For example, you can use Large RAM Pages (2 MB) in allocBig allocator for
+better compression speed. Note that Windows has bad implementation for
+Large RAM Pages.
+It's OK to use same allocator for alloc and allocBig.
+
+
+Single-call Compression with callbacks
+--------------------------------------
+
+Check C/LzmaUtil/LzmaUtil.c as example,
+
+When to use: file->file decompressing
+
+1) you must implement callback structures for interfaces:
+ISeqInStream
+ISeqOutStream
+ICompressProgress
+ISzAlloc
+
+static void *SzAlloc(void *p, size_t size) { p = p; return MyAlloc(size); }
+static void SzFree(void *p, void *address) { p = p; MyFree(address); }
+static ISzAlloc g_Alloc = { SzAlloc, SzFree };
+
+ CFileSeqInStream inStream;
+ CFileSeqOutStream outStream;
+
+ inStream.funcTable.Read = MyRead;
+ inStream.file = inFile;
+ outStream.funcTable.Write = MyWrite;
+ outStream.file = outFile;
+
+
+2) Create CLzmaEncHandle object;
+
+ CLzmaEncHandle enc;
+
+ enc = LzmaEnc_Create(&g_Alloc);
+ if (enc == 0)
+ return SZ_ERROR_MEM;
+
+
+3) initialize CLzmaEncProps properties;
+
+ LzmaEncProps_Init(&props);
+
+ Then you can change some properties in that structure.
+
+4) Send LZMA properties to LZMA Encoder
+
+ res = LzmaEnc_SetProps(enc, &props);
+
+5) Write encoded properties to header
+
+ Byte header[LZMA_PROPS_SIZE + 8];
+ size_t headerSize = LZMA_PROPS_SIZE;
+ UInt64 fileSize;
+ int i;
+
+ res = LzmaEnc_WriteProperties(enc, header, &headerSize);
+ fileSize = MyGetFileLength(inFile);
+ for (i = 0; i < 8; i++)
+ header[headerSize++] = (Byte)(fileSize >> (8 * i));
+ MyWriteFileAndCheck(outFile, header, headerSize)
+
+6) Call encoding function:
+ res = LzmaEnc_Encode(enc, &outStream.funcTable, &inStream.funcTable,
+ NULL, &g_Alloc, &g_Alloc);
+
+7) Destroy LZMA Encoder Object
+ LzmaEnc_Destroy(enc, &g_Alloc, &g_Alloc);
+
+
+If callback function return some error code, LzmaEnc_Encode also returns that code.
+
+
+Single-call RAM->RAM Compression
+--------------------------------
+
+Single-call RAM->RAM Compression is similar to Compression with callbacks,
+but you provide pointers to buffers instead of pointers to stream callbacks:
+
+HRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
+ CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
+ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
+
+Return code:
+ SZ_OK - OK
+ SZ_ERROR_MEM - Memory allocation error
+ SZ_ERROR_PARAM - Incorrect paramater
+ SZ_ERROR_OUTPUT_EOF - output buffer overflow
+ SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
+
+
+
+LZMA Defines
+------------
+
+_LZMA_SIZE_OPT - Enable some optimizations in LZMA Decoder to get smaller executable code.
+
+_LZMA_PROB32 - It can increase the speed on some 32-bit CPUs, but memory usage for
+ some structures will be doubled in that case.
+
+_LZMA_UINT32_IS_ULONG - Define it if int is 16-bit on your compiler and long is 32-bit.
+
+_LZMA_NO_SYSTEM_SIZE_T - Define it if you don't want to use size_t type.
+
+
+C++ LZMA Encoder/Decoder
+~~~~~~~~~~~~~~~~~~~~~~~~
+C++ LZMA code use COM-like interfaces. So if you want to use it,
+you can study basics of COM/OLE.
+C++ LZMA code is just wrapper over ANSI-C code.
+
+
+C++ Notes
+~~~~~~~~~~~~~~~~~~~~~~~~
+If you use some C++ code folders in 7-Zip (for example, C++ code for .7z handling),
+you must check that you correctly work with "new" operator.
+7-Zip can be compiled with MSVC 6.0 that doesn't throw "exception" from "new" operator.
+So 7-Zip uses "CPP\Common\NewHandler.cpp" that redefines "new" operator:
+operator new(size_t size)
+{
+ void *p = ::malloc(size);
+ if (p == 0)
+ throw CNewException();
+ return p;
+}
+If you use MSCV that throws exception for "new" operator, you can compile without
+"NewHandler.cpp". So standard exception will be used. Actually some code of
+7-Zip catches any exception in internal code and converts it to HRESULT code.
+So you don't need to catch CNewException, if you call COM interfaces of 7-Zip.
+
+---
+
+http://www.7-zip.org
+http://www.7-zip.org/sdk.html
+http://www.7-zip.org/support.html
diff --git a/MdeModulePkg/Library/LzmaCustomDecompressLib/UefiLzma.h b/MdeModulePkg/Library/LzmaCustomDecompressLib/UefiLzma.h
new file mode 100644
index 0000000000..863b3ef66b
--- /dev/null
+++ b/MdeModulePkg/Library/LzmaCustomDecompressLib/UefiLzma.h
@@ -0,0 +1,47 @@
+/** @file
+ LZMA UEFI header file
+
+ Allows LZMA code to build under UEFI (edk2) build environment
+
+ Copyright (c) 2009, Intel Corporation. All rights reserved.
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __UEFILZMA_H__
+#define __UEFILZMA_H__
+
+#include
+#include
+
+#ifdef _WIN32
+#undef _WIN32
+#endif
+
+#ifndef _SIZE_T_DEFINED
+#if !defined(_WIN64) || defined(__GNUC__)
+typedef unsigned int size_t;
+#endif
+#endif
+
+#ifdef _WIN64
+#undef _WIN64
+#endif
+
+#ifndef _PTRDIFF_T_DEFINED
+typedef int ptrdiff_t;
+#endif
+
+#define memcpy CopyMem
+#define memmove CopyMem
+
+#define _LZMA_SIZE_OPT
+
+#endif // __UEFILZMA_H__
+
diff --git a/MdeModulePkg/Library/PeiDxeDebugLibReportStatusCode/DebugLib.c b/MdeModulePkg/Library/PeiDxeDebugLibReportStatusCode/DebugLib.c
new file mode 100644
index 0000000000..ce2f72aef8
--- /dev/null
+++ b/MdeModulePkg/Library/PeiDxeDebugLibReportStatusCode/DebugLib.c
@@ -0,0 +1,461 @@
+/** @file
+ Debug Library based on report status code library.
+
+ Note that if the debug message length is larger than the maximum allowable
+ record length, then the debug message will be ignored directly.
+
+ Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include
+
+#include
+#include
+
+#include
+#include
+#include
+#include
+#include
+#include
+
+/**
+ Prints a debug message to the debug output device if the specified error level is enabled.
+
+ If any bit in ErrorLevel is also set in DebugPrintErrorLevelLib function
+ GetDebugPrintErrorLevel (), then print the message specified by Format and the
+ associated variable argument list to the debug output device.
+
+ If Format is NULL, then ASSERT().
+
+ If the length of the message string specificed by Format is larger than the maximum allowable
+ record length, then directly return and not print it.
+
+ @param ErrorLevel The error level of the debug message.
+ @param Format Format string for the debug message to print.
+ @param ... Variable argument list whose contents are accessed
+ based on the format string specified by Format.
+
+**/
+VOID
+EFIAPI
+DebugPrint (
+ IN UINTN ErrorLevel,
+ IN CONST CHAR8 *Format,
+ ...
+ )
+{
+ UINT64 Buffer[(EFI_STATUS_CODE_DATA_MAX_SIZE / sizeof (UINT64)) + 1];
+ EFI_DEBUG_INFO *DebugInfo;
+ UINTN TotalSize;
+ VA_LIST VaListMarker;
+ BASE_LIST BaseListMarker;
+ CHAR8 *FormatString;
+ BOOLEAN Long;
+
+ //
+ // If Format is NULL, then ASSERT().
+ //
+ ASSERT (Format != NULL);
+
+ //
+ // Check driver Debug Level value and global debug level
+ //
+ if ((ErrorLevel & GetDebugPrintErrorLevel ()) == 0) {
+ return;
+ }
+
+ //
+ // Compute the total size of the record.
+ // Note that the passing-in format string and variable parameters will be constructed to
+ // the following layout:
+ //
+ // Buffer->|------------------------|
+ // | Padding | 4 bytes
+ // DebugInfo->|------------------------|
+ // | EFI_DEBUG_INFO | sizeof(EFI_DEBUG_INFO)
+ // BaseListMarker->|------------------------|
+ // | ... |
+ // | variable arguments | 12 * sizeof (UINT64)
+ // | ... |
+ // |------------------------|
+ // | Format String |
+ // |------------------------|<- (UINT8 *)Buffer + sizeof(Buffer)
+ //
+ TotalSize = 4 + sizeof (EFI_DEBUG_INFO) + 12 * sizeof (UINT64) + AsciiStrSize (Format);
+
+ //
+ // If the TotalSize is larger than the maximum record size, then return
+ //
+ if (TotalSize > sizeof (Buffer)) {
+ return;
+ }
+
+ //
+ // Fill in EFI_DEBUG_INFO
+ //
+ // Here we skip the first 4 bytes of Buffer, because we must ensure BaseListMarker is
+ // 64-bit aligned, otherwise retrieving 64-bit parameter from BaseListMarker will cause
+ // exception on IPF. Buffer starts at 64-bit aligned address, so skipping 4 types (sizeof(EFI_DEBUG_INFO))
+ // just makes address of BaseListMarker, which follows DebugInfo, 64-bit aligned.
+ //
+ DebugInfo = (EFI_DEBUG_INFO *)(Buffer) + 1;
+ DebugInfo->ErrorLevel = (UINT32)ErrorLevel;
+ BaseListMarker = (BASE_LIST)(DebugInfo + 1);
+ FormatString = (CHAR8 *)((UINT64 *)(DebugInfo + 1) + 12);
+
+ //
+ // Copy the Format string into the record
+ //
+ AsciiStrCpy (FormatString, Format);
+
+ //
+ // The first 12 * sizeof (UINT64) bytes following EFI_DEBUG_INFO are for variable arguments
+ // of format in DEBUG string, which is followed by the DEBUG format string.
+ // Here we will process the variable arguments and pack them in this area.
+ //
+ VA_START (VaListMarker, Format);
+ for (; *Format != '\0'; Format++) {
+ //
+ // Only format with prefix % is processed.
+ //
+ if (*Format != '%') {
+ continue;
+ }
+ Long = FALSE;
+ //
+ // Parse Flags and Width
+ //
+ for (Format++; TRUE; Format++) {
+ if (*Format == '.' || *Format == '-' || *Format == '+' || *Format == ' ') {
+ //
+ // These characters in format field are omitted.
+ //
+ continue;
+ }
+ if (*Format >= '0' && *Format <= '9') {
+ //
+ // These characters in format field are omitted.
+ //
+ continue;
+ }
+ if (*Format == 'L' || *Format == 'l') {
+ //
+ // 'L" or "l" in format field means the number being printed is a UINT64
+ //
+ Long = TRUE;
+ continue;
+ }
+ if (*Format == '*') {
+ //
+ // '*' in format field means the precision of the field is specified by
+ // a UINTN argument in the argument list.
+ //
+ BASE_ARG (BaseListMarker, UINTN) = VA_ARG (VaListMarker, UINTN);
+ continue;
+ }
+ if (*Format == '\0') {
+ //
+ // Make no output if Format string terminates unexpectedly when
+ // looking up for flag, width, precision and type.
+ //
+ Format--;
+ }
+ //
+ // When valid argument type detected or format string terminates unexpectedly,
+ // the inner loop is done.
+ //
+ break;
+ }
+
+ //
+ // Pack variable arguments into the storage area following EFI_DEBUG_INFO.
+ //
+ if ((*Format == 'p') && (sizeof (VOID *) > 4)) {
+ Long = TRUE;
+ }
+ if (*Format == 'p' || *Format == 'X' || *Format == 'x' || *Format == 'd') {
+ if (Long) {
+ BASE_ARG (BaseListMarker, INT64) = VA_ARG (VaListMarker, INT64);
+ } else {
+ BASE_ARG (BaseListMarker, int) = VA_ARG (VaListMarker, int);
+ }
+ } else if (*Format == 's' || *Format == 'S' || *Format == 'a' || *Format == 'g' || *Format == 't') {
+ BASE_ARG (BaseListMarker, VOID *) = VA_ARG (VaListMarker, VOID *);
+ } else if (*Format == 'c') {
+ BASE_ARG (BaseListMarker, UINTN) = VA_ARG (VaListMarker, UINTN);
+ } else if (*Format == 'r') {
+ BASE_ARG (BaseListMarker, RETURN_STATUS) = VA_ARG (VaListMarker, RETURN_STATUS);
+ }
+
+ //
+ // If the converted BASE_LIST is larger than the 12 * sizeof (UINT64) allocated bytes, then ASSERT()
+ // This indicates that the DEBUG() macro is passing in more argument than can be handled by
+ // the EFI_DEBUG_INFO record
+ //
+ ASSERT ((CHAR8 *)BaseListMarker <= FormatString);
+
+ //
+ // If the converted BASE_LIST is larger than the 12 * sizeof (UINT64) allocated bytes, then return
+ //
+ if ((CHAR8 *)BaseListMarker > FormatString) {
+ VA_END (VaListMarker);
+ return;
+ }
+ }
+ VA_END (VaListMarker);
+
+ //
+ // Send the DebugInfo record
+ //
+ REPORT_STATUS_CODE_EX (
+ EFI_DEBUG_CODE,
+ (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_DC_UNSPECIFIED),
+ 0,
+ NULL,
+ &gEfiStatusCodeDataTypeDebugGuid,
+ DebugInfo,
+ TotalSize
+ );
+}
+
+/**
+ Prints an assert message containing a filename, line number, and description.
+ This may be followed by a breakpoint or a dead loop.
+
+ Print a message of the form "ASSERT (): \n"
+ to the debug output device. If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of
+ PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if
+ DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then
+ CpuDeadLoop() is called. If neither of these bits are set, then this function
+ returns immediately after the message is printed to the debug output device.
+ DebugAssert() must actively prevent recursion. If DebugAssert() is called while
+ processing another DebugAssert(), then DebugAssert() must return immediately.
+
+ If FileName is NULL, then a string of "(NULL) Filename" is printed.
+ If Description is NULL, then a string of "(NULL) Description" is printed.
+
+ @param FileName Pointer to the name of the source file that generated the assert condition.
+ @param LineNumber The line number in the source file that generated the assert condition
+ @param Description Pointer to the description of the assert condition.
+
+**/
+VOID
+EFIAPI
+DebugAssert (
+ IN CONST CHAR8 *FileName,
+ IN UINTN LineNumber,
+ IN CONST CHAR8 *Description
+ )
+{
+ UINT64 Buffer[EFI_STATUS_CODE_DATA_MAX_SIZE / sizeof(UINT64)];
+ EFI_DEBUG_ASSERT_DATA *AssertData;
+ UINTN HeaderSize;
+ UINTN TotalSize;
+ CHAR8 *Temp;
+ UINTN FileNameSize;
+ UINTN DescriptionSize;
+
+ //
+ // Get string size
+ //
+ HeaderSize = sizeof (EFI_DEBUG_ASSERT_DATA);
+ FileNameSize = AsciiStrSize (FileName);
+ DescriptionSize = AsciiStrSize (Description);
+
+ //
+ // Make sure it will all fit in the passed in buffer.
+ //
+ if (HeaderSize + FileNameSize + DescriptionSize > sizeof (Buffer)) {
+ //
+ // FileName + Description is too long to be filled into buffer.
+ //
+ if (HeaderSize + FileNameSize < sizeof (Buffer)) {
+ //
+ // Description has enough buffer to be truncated.
+ //
+ DescriptionSize = sizeof (Buffer) - HeaderSize - FileNameSize;
+ } else {
+ //
+ // FileName is too long to be filled into buffer.
+ // FileName will be truncated. Reserved one byte for Description NULL terminator.
+ //
+ DescriptionSize = 1;
+ FileNameSize = sizeof (Buffer) - HeaderSize - DescriptionSize;
+ }
+ }
+
+ //
+ // Fill in EFI_DEBUG_ASSERT_DATA
+ //
+ AssertData = (EFI_DEBUG_ASSERT_DATA *)Buffer;
+ AssertData->LineNumber = (UINT32)LineNumber;
+ TotalSize = sizeof (EFI_DEBUG_ASSERT_DATA);
+
+ //
+ // Copy Ascii FileName including NULL terminator.
+ //
+ Temp = CopyMem (AssertData + 1, FileName, FileNameSize);
+ Temp[FileNameSize - 1] = 0;
+ TotalSize += FileNameSize;
+
+ //
+ // Copy Ascii Description include NULL terminator.
+ //
+ Temp = CopyMem (Temp + FileNameSize, Description, DescriptionSize);
+ Temp[DescriptionSize - 1] = 0;
+ TotalSize += DescriptionSize;
+
+ REPORT_STATUS_CODE_EX (
+ (EFI_ERROR_CODE | EFI_ERROR_UNRECOVERED),
+ (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_EC_ILLEGAL_SOFTWARE_STATE),
+ 0,
+ NULL,
+ NULL,
+ AssertData,
+ TotalSize
+ );
+
+ //
+ // Generate a Breakpoint, DeadLoop, or NOP based on PCD settings
+ //
+ if ((PcdGet8 (PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED) != 0) {
+ CpuBreakpoint ();
+ } else if ((PcdGet8 (PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED) != 0) {
+ CpuDeadLoop ();
+ }
+}
+
+
+/**
+ Fills a target buffer with PcdDebugClearMemoryValue, and returns the target buffer.
+
+ This function fills Length bytes of Buffer with the value specified by
+ PcdDebugClearMemoryValue, and returns Buffer.
+
+ If Buffer is NULL, then ASSERT().
+ If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().
+
+ @param Buffer Pointer to the target buffer to be filled with PcdDebugClearMemoryValue.
+ @param Length Number of bytes in Buffer to fill with zeros PcdDebugClearMemoryValue.
+
+ @return Buffer Pointer to the target buffer filled with PcdDebugClearMemoryValue.
+
+**/
+VOID *
+EFIAPI
+DebugClearMemory (
+ OUT VOID *Buffer,
+ IN UINTN Length
+ )
+{
+ ASSERT (Buffer != NULL);
+
+ return SetMem (Buffer, Length, PcdGet8 (PcdDebugClearMemoryValue));
+}
+
+
+/**
+ Returns TRUE if ASSERT() macros are enabled.
+
+ This function returns TRUE if the DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of
+ PcdDebugProperyMask is set. Otherwise FALSE is returned.
+
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is clear.
+
+**/
+BOOLEAN
+EFIAPI
+DebugAssertEnabled (
+ VOID
+ )
+{
+ return (BOOLEAN) ((PcdGet8 (PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED) != 0);
+}
+
+
+/**
+ Returns TRUE if DEBUG() macros are enabled.
+
+ This function returns TRUE if the DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of
+ PcdDebugProperyMask is set. Otherwise FALSE is returned.
+
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is clear.
+
+**/
+BOOLEAN
+EFIAPI
+DebugPrintEnabled (
+ VOID
+ )
+{
+ return (BOOLEAN) ((PcdGet8 (PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_PRINT_ENABLED) != 0);
+}
+
+
+/**
+ Returns TRUE if DEBUG_CODE() macros are enabled.
+
+ This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
+ PcdDebugProperyMask is set. Otherwise FALSE is returned.
+
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is clear.
+
+**/
+BOOLEAN
+EFIAPI
+DebugCodeEnabled (
+ VOID
+ )
+{
+ return (BOOLEAN) ((PcdGet8 (PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_CODE_ENABLED) != 0);
+}
+
+
+/**
+ Returns TRUE if DEBUG_CLEAR_MEMORY() macro is enabled.
+
+ This function returns TRUE if the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
+ PcdDebugProperyMask is set. Otherwise FALSE is returned.
+
+ @retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is set.
+ @retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is clear.
+
+**/
+BOOLEAN
+EFIAPI
+DebugClearMemoryEnabled (
+ VOID
+ )
+{
+ return (BOOLEAN) ((PcdGet8 (PcdDebugPropertyMask) & DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED) != 0);
+}
+
+/**
+ Returns TRUE if any one of the bit is set both in ErrorLevel and PcdFixedDebugPrintErrorLevel.
+
+ This function compares the bit mask of ErrorLevel and PcdFixedDebugPrintErrorLevel.
+
+ @retval TRUE Current ErrorLevel is supported.
+ @retval FALSE Current ErrorLevel is not supported.
+
+**/
+BOOLEAN
+EFIAPI
+DebugPrintLevelEnabled (
+ IN CONST UINTN ErrorLevel
+ )
+{
+ return (BOOLEAN) ((ErrorLevel & PcdGet32(PcdFixedDebugPrintErrorLevel)) != 0);
+}
diff --git a/MdeModulePkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.inf b/MdeModulePkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.inf
new file mode 100644
index 0000000000..55446672d7
--- /dev/null
+++ b/MdeModulePkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.inf
@@ -0,0 +1,54 @@
+## @file
+# Debug Library based on report status code library
+#
+# Debug Library for PEIMs and DXE drivers that sends debug messages to ReportStatusCode
+# Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = PeiDxeDebugLibReportStatusCode
+ MODULE_UNI_FILE = PeiDxeDebugLibReportStatusCode.uni
+ FILE_GUID = bda39d3a-451b-4350-8266-81ab10fa0523
+ MODULE_TYPE = PEIM
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = DebugLib|DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SAL_DRIVER DXE_SMM_DRIVER SMM_CORE PEIM SEC PEI_CORE UEFI_APPLICATION UEFI_DRIVER
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC
+#
+
+[Sources]
+ DebugLib.c
+
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[LibraryClasses]
+ PcdLib
+ ReportStatusCodeLib
+ BaseMemoryLib
+ BaseLib
+ DebugPrintErrorLevelLib
+
+[Pcd]
+ gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue ## SOMETIMES_CONSUMES
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask ## CONSUMES
+ gEfiMdePkgTokenSpaceGuid.PcdFixedDebugPrintErrorLevel ## CONSUMES
+
+[Guids]
+ gEfiStatusCodeDataTypeDebugGuid ## SOMETIMES_CONSUMES ## GUID
+
diff --git a/MdeModulePkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.uni b/MdeModulePkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.uni
new file mode 100644
index 0000000000..fe2abee431
Binary files /dev/null and b/MdeModulePkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.uni differ
diff --git a/MdeModulePkg/MdeModulePkg.dsc b/MdeModulePkg/MdeModulePkg.dsc
index 154ee9fdf1..b9df820d6d 100644
--- a/MdeModulePkg/MdeModulePkg.dsc
+++ b/MdeModulePkg/MdeModulePkg.dsc
@@ -261,6 +261,8 @@
MdeModulePkg/Library/PeiDebugPrintHobLib/PeiDebugPrintHobLib.inf
MdeModulePkg/Library/CpuExceptionHandlerLibNull/CpuExceptionHandlerLibNull.inf
MdeModulePkg/Library/PlatformHookLibSerialPortPpi/PlatformHookLibSerialPortPpi.inf
+ MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
+ MdeModulePkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.inf
MdeModulePkg/Universal/CapsulePei/CapsulePei.inf
MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
@@ -365,6 +367,7 @@
MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxDxeLib.inf
MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxSmmLib.inf
MdeModulePkg/Library/SmmCorePlatformHookLibNull/SmmCorePlatformHookLibNull.inf
+ MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaArchCustomDecompressLib.inf
MdeModulePkg/Universal/Acpi/BootScriptExecutorDxe/BootScriptExecutorDxe.inf
MdeModulePkg/Universal/Acpi/S3SaveStateDxe/S3SaveStateDxe.inf
MdeModulePkg/Universal/Acpi/SmmS3SaveState/SmmS3SaveState.inf