ArmPlatformPkg: reorganize PL011 code

The PL011 code in ArmPlatformPkg is organized in a weird way: there is
a single PL011Uart.h header file under Include/Drivers containing both
register definitions and function entry points. The PL011Uart library
itself is in Drivers/ but it is actually a library.

So let's clean this up: add a new PL011UartLib library class and associated
header file containing only the library prototypes, and move the library
itself under Library/ using a new GUID, with the register definitions moved
into a local header file.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>

ArmPlatformPkg/Library/PL011UartLib/PL011Uart.h

@@ -0,0 +1,120 @@
+/** @file
+*
+*  Copyright (c) 2011-2016, ARM Limited. All rights reserved.
+*
+*  This program and the accompanying materials
+*  are licensed and made available under the terms and conditions of the BSD License
+*  which accompanies this distribution.  The full text of the license may be found at
+*  http://opensource.org/licenses/bsd-license.php
+*
+*  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+*  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef __PL011_UART_H__
+#define __PL011_UART_H__
+
+#define PL011_VARIANT_ZTE 1
+
+// PL011 Registers
+#if FixedPcdGet8 (PL011UartRegOffsetVariant) == PL011_VARIANT_ZTE
+#define UARTDR                    0x004
+#define UARTRSR                   0x010
+#define UARTECR                   0x010
+#define UARTFR                    0x014
+#define UARTIBRD                  0x024
+#define UARTFBRD                  0x028
+#define UARTLCR_H                 0x030
+#define UARTCR                    0x034
+#define UARTIFLS                  0x038
+#define UARTIMSC                  0x040
+#define UARTRIS                   0x044
+#define UARTMIS                   0x048
+#define UARTICR                   0x04c
+#define UARTDMACR                 0x050
+#else
+#define UARTDR                    0x000
+#define UARTRSR                   0x004
+#define UARTECR                   0x004
+#define UARTFR                    0x018
+#define UARTILPR                  0x020
+#define UARTIBRD                  0x024
+#define UARTFBRD                  0x028
+#define UARTLCR_H                 0x02C
+#define UARTCR                    0x030
+#define UARTIFLS                  0x034
+#define UARTIMSC                  0x038
+#define UARTRIS                   0x03C
+#define UARTMIS                   0x040
+#define UARTICR                   0x044
+#define UARTDMACR                 0x048
+#endif
+
+#define UARTPID0                  0xFE0
+#define UARTPID1                  0xFE4
+#define UARTPID2                  0xFE8
+#define UARTPID3                  0xFEC
+
+// Data status bits
+#define UART_DATA_ERROR_MASK      0x0F00
+
+// Status reg bits
+#define UART_STATUS_ERROR_MASK    0x0F
+
+// Flag reg bits
+#if FixedPcdGet8 (PL011UartRegOffsetVariant) == PL011_VARIANT_ZTE
+#define PL011_UARTFR_RI           (1 << 0)  // Ring indicator
+#define PL011_UARTFR_TXFE         (1 << 7)  // Transmit FIFO empty
+#define PL011_UARTFR_RXFF         (1 << 6)  // Receive  FIFO full
+#define PL011_UARTFR_TXFF         (1 << 5)  // Transmit FIFO full
+#define PL011_UARTFR_RXFE         (1 << 4)  // Receive  FIFO empty
+#define PL011_UARTFR_BUSY         (1 << 8)  // UART busy
+#define PL011_UARTFR_DCD          (1 << 2)  // Data carrier detect
+#define PL011_UARTFR_DSR          (1 << 3)  // Data set ready
+#define PL011_UARTFR_CTS          (1 << 1)  // Clear to send
+#else
+#define PL011_UARTFR_RI           (1 << 8)  // Ring indicator
+#define PL011_UARTFR_TXFE         (1 << 7)  // Transmit FIFO empty
+#define PL011_UARTFR_RXFF         (1 << 6)  // Receive  FIFO full
+#define PL011_UARTFR_TXFF         (1 << 5)  // Transmit FIFO full
+#define PL011_UARTFR_RXFE         (1 << 4)  // Receive  FIFO empty
+#define PL011_UARTFR_BUSY         (1 << 3)  // UART busy
+#define PL011_UARTFR_DCD          (1 << 2)  // Data carrier detect
+#define PL011_UARTFR_DSR          (1 << 1)  // Data set ready
+#define PL011_UARTFR_CTS          (1 << 0)  // Clear to send
+#endif
+
+// Flag reg bits - alternative names
+#define UART_TX_EMPTY_FLAG_MASK   PL011_UARTFR_TXFE
+#define UART_RX_FULL_FLAG_MASK    PL011_UARTFR_RXFF
+#define UART_TX_FULL_FLAG_MASK    PL011_UARTFR_TXFF
+#define UART_RX_EMPTY_FLAG_MASK   PL011_UARTFR_RXFE
+#define UART_BUSY_FLAG_MASK       PL011_UARTFR_BUSY
+
+// Control reg bits
+#define PL011_UARTCR_CTSEN        (1 << 15) // CTS hardware flow control enable
+#define PL011_UARTCR_RTSEN        (1 << 14) // RTS hardware flow control enable
+#define PL011_UARTCR_RTS          (1 << 11) // Request to send
+#define PL011_UARTCR_DTR          (1 << 10) // Data transmit ready.
+#define PL011_UARTCR_RXE          (1 << 9)  // Receive enable
+#define PL011_UARTCR_TXE          (1 << 8)  // Transmit enable
+#define PL011_UARTCR_LBE          (1 << 7)  // Loopback enable
+#define PL011_UARTCR_UARTEN       (1 << 0)  // UART Enable
+
+// Line Control Register Bits
+#define PL011_UARTLCR_H_SPS       (1 << 7)  // Stick parity select
+#define PL011_UARTLCR_H_WLEN_8    (3 << 5)
+#define PL011_UARTLCR_H_WLEN_7    (2 << 5)
+#define PL011_UARTLCR_H_WLEN_6    (1 << 5)
+#define PL011_UARTLCR_H_WLEN_5    (0 << 5)
+#define PL011_UARTLCR_H_FEN       (1 << 4)  // FIFOs Enable
+#define PL011_UARTLCR_H_STP2      (1 << 3)  // Two stop bits select
+#define PL011_UARTLCR_H_EPS       (1 << 2)  // Even parity select
+#define PL011_UARTLCR_H_PEN       (1 << 1)  // Parity Enable
+#define PL011_UARTLCR_H_BRK       (1 << 0)  // Send break
+
+#define PL011_UARTPID2_VER(X)     (((X) >> 4) & 0xF)
+#define PL011_VER_R1P4            0x2
+
+#endif