sravan/system76-edk2
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ARM Packages: Fixed line endings

Browse Source 
This large code change only modifies the line endings to be CRLF to be
compliant with the EDK2 coding convention document.



git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14088 6f19259b-4bc3-4df7-8a09-765794883524
This commit is contained in:
oliviermartin
2013-01-25 11:28:06 +00:00
parent 5767f22fca
commit 1e57a46299
280 changed files with 48862 additions and 48862 deletions
Download Patch File Download Diff File Expand all files Collapse all files

636
ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-RTSM-A15.fdf
View File

@@ -1,318 +1,318 @@
# FLASH layout file for ARM VE.
#
# Copyright (c) 2011, ARM Limited. All rights reserved.
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into the Flash Device Image. Each FD section
# defines one flash "device" image. A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash" image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################
[FD.RTSM_VE_Cortex-A15_EFI]
BaseAddress = 0x08000000|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.
Size = 0x00280000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
ErasePolarity = 1
# This one is tricky, it must be: BlockSize * NumBlocks = Size
BlockSize = 0x00001000
NumBlocks = 0x280
################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################
0x00000000|0x00080000
gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
FV = FVMAIN_SEC
0x00080000|0x00280000
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT
################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file. This section also defines order the components and modules are positioned
# within the image. The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.FVMAIN_SEC]
FvAlignment = 8
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
INF ArmPlatformPkg/Sec/Sec.inf
[FV.FvMain]
BlockSize = 0x40
NumBlocks = 0 # This FV gets compressed so make it just big enough
FvAlignment = 8 # FV alignment and FV attributes setting.
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
INF MdeModulePkg/Core/Dxe/DxeMain.inf
#
# PI DXE Drivers producing Architectural Protocols (EFI Services)
#
INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
#
# Multiple Console IO support
#
INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
INF EmbeddedPkg/SerialDxe/SerialDxe.inf
INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf
INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
#
# Semi-hosting filesystem
#
INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
#
# FAT filesystem + GPT/MBR partitioning
#
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
INF FatBinPkg/EnhancedFatDxe/Fat.inf
INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
#
# Multimedia Card Interface
#
INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf
#
# UEFI application (Shell Embedded Boot Loader)
#
INF ShellBinPkg/UefiShell/UefiShell.inf
#
# Bds
#
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF ArmPlatformPkg/Bds/Bds.inf
[FV.FVMAIN_COMPACT]
FvAlignment = 8
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
!if $(EDK2_SKIP_PEICORE) == 1
INF ArmPlatformPkg/PrePi/PeiUniCore.inf
!else
INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
INF MdeModulePkg/Core/Pei/PeiMain.inf
INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
INF ArmPkg/Drivers/CpuPei/CpuPei.inf
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
!endif
FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
SECTION FV_IMAGE = FVMAIN
}
}
################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################
############################################################################
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
############################################################################
#
#[Rule.Common.DXE_DRIVER]
# FILE DRIVER = $(NAMED_GUID) {
# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
# COMPRESS PI_STD {
# GUIDED {
# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
# UI STRING="$(MODULE_NAME)" Optional
# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
# }
# }
# }
#
############################################################################
[Rule.Common.SEC]
FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi
}
[Rule.Common.PEI_CORE]
FILE PEI_CORE = $(NAMED_GUID) {
TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING ="$(MODULE_NAME)" Optional
}
[Rule.Common.PEIM]
FILE PEIM = $(NAMED_GUID) {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.PEIM.TIANOCOMPRESSED]
FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
}
[Rule.Common.DXE_CORE]
FILE DXE_CORE = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.UEFI_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.DXE_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.DXE_RUNTIME_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.UEFI_APPLICATION]
FILE APPLICATION = $(NAMED_GUID) {
UI STRING ="$(MODULE_NAME)" Optional
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
}
[Rule.Common.UEFI_DRIVER.BINARY]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional |.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_APPLICATION.BINARY]
FILE APPLICATION = $(NAMED_GUID) {
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
# FLASH layout file for ARM VE.
#
# Copyright (c) 2011, ARM Limited. All rights reserved.
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into the Flash Device Image. Each FD section
# defines one flash "device" image. A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash" image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################
[FD.RTSM_VE_Cortex-A15_EFI]
BaseAddress = 0x08000000|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.
Size = 0x00280000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
ErasePolarity = 1
# This one is tricky, it must be: BlockSize * NumBlocks = Size
BlockSize = 0x00001000
NumBlocks = 0x280
################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################
0x00000000|0x00080000
gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
FV = FVMAIN_SEC
0x00080000|0x00280000
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT
################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file. This section also defines order the components and modules are positioned
# within the image. The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.FVMAIN_SEC]
FvAlignment = 8
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
INF ArmPlatformPkg/Sec/Sec.inf
[FV.FvMain]
BlockSize = 0x40
NumBlocks = 0 # This FV gets compressed so make it just big enough
FvAlignment = 8 # FV alignment and FV attributes setting.
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
INF MdeModulePkg/Core/Dxe/DxeMain.inf
#
# PI DXE Drivers producing Architectural Protocols (EFI Services)
#
INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
#
# Multiple Console IO support
#
INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
INF EmbeddedPkg/SerialDxe/SerialDxe.inf
INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf
INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
#
# Semi-hosting filesystem
#
INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
#
# FAT filesystem + GPT/MBR partitioning
#
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
INF FatBinPkg/EnhancedFatDxe/Fat.inf
INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
#
# Multimedia Card Interface
#
INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf
#
# UEFI application (Shell Embedded Boot Loader)
#
INF ShellBinPkg/UefiShell/UefiShell.inf
#
# Bds
#
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF ArmPlatformPkg/Bds/Bds.inf
[FV.FVMAIN_COMPACT]
FvAlignment = 8
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
!if $(EDK2_SKIP_PEICORE) == 1
INF ArmPlatformPkg/PrePi/PeiUniCore.inf
!else
INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
INF MdeModulePkg/Core/Pei/PeiMain.inf
INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
INF ArmPkg/Drivers/CpuPei/CpuPei.inf
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
!endif
FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
SECTION FV_IMAGE = FVMAIN
}
}
################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################
############################################################################
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
############################################################################
#
#[Rule.Common.DXE_DRIVER]
# FILE DRIVER = $(NAMED_GUID) {
# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
# COMPRESS PI_STD {
# GUIDED {
# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
# UI STRING="$(MODULE_NAME)" Optional
# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
# }
# }
# }
#
############################################################################
[Rule.Common.SEC]
FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi
}
[Rule.Common.PEI_CORE]
FILE PEI_CORE = $(NAMED_GUID) {
TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING ="$(MODULE_NAME)" Optional
}
[Rule.Common.PEIM]
FILE PEIM = $(NAMED_GUID) {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.PEIM.TIANOCOMPRESSED]
FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
}
[Rule.Common.DXE_CORE]
FILE DXE_CORE = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.UEFI_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.DXE_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.DXE_RUNTIME_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.UEFI_APPLICATION]
FILE APPLICATION = $(NAMED_GUID) {
UI STRING ="$(MODULE_NAME)" Optional
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
}
[Rule.Common.UEFI_DRIVER.BINARY]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional |.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_APPLICATION.BINARY]
FILE APPLICATION = $(NAMED_GUID) {
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}

636
ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-RTSM-A15_MPCore.fdf
View File

@@ -1,318 +1,318 @@
# FLASH layout file for ARM VE.
#
# Copyright (c) 2011, ARM Limited. All rights reserved.
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into the Flash Device Image. Each FD section
# defines one flash "device" image. A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash" image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################
[FD.RTSM_VE_Cortex-A15_MPCore_EFI]
BaseAddress = 0x08000000|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.
Size = 0x00280000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
ErasePolarity = 1
# This one is tricky, it must be: BlockSize * NumBlocks = Size
BlockSize = 0x00001000
NumBlocks = 0x280
################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################
0x00000000|0x00080000
gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
FV = FVMAIN_SEC
0x00080000|0x00280000
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT
################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file. This section also defines order the components and modules are positioned
# within the image. The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.FVMAIN_SEC]
FvAlignment = 8
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
INF ArmPlatformPkg/Sec/Sec.inf
[FV.FvMain]
BlockSize = 0x40
NumBlocks = 0 # This FV gets compressed so make it just big enough
FvAlignment = 8 # FV alignment and FV attributes setting.
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
INF MdeModulePkg/Core/Dxe/DxeMain.inf
#
# PI DXE Drivers producing Architectural Protocols (EFI Services)
#
INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
#
# Multiple Console IO support
#
INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
INF EmbeddedPkg/SerialDxe/SerialDxe.inf
INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf
INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
#
# Semi-hosting filesystem
#
INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
#
# FAT filesystem + GPT/MBR partitioning
#
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
INF FatBinPkg/EnhancedFatDxe/Fat.inf
INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
#
# Multimedia Card Interface
#
INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf
#
# UEFI application (Shell Embedded Boot Loader)
#
INF ShellBinPkg/UefiShell/UefiShell.inf
#
# Bds
#
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF ArmPlatformPkg/Bds/Bds.inf
[FV.FVMAIN_COMPACT]
FvAlignment = 8
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
!if $(EDK2_SKIP_PEICORE) == 1
INF ArmPlatformPkg/PrePi/PeiMPCore.inf
!else
INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
INF MdeModulePkg/Core/Pei/PeiMain.inf
INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
INF ArmPkg/Drivers/CpuPei/CpuPei.inf
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
!endif
FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
SECTION FV_IMAGE = FVMAIN
}
}
################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################
############################################################################
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
############################################################################
#
#[Rule.Common.DXE_DRIVER]
# FILE DRIVER = $(NAMED_GUID) {
# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
# COMPRESS PI_STD {
# GUIDED {
# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
# UI STRING="$(MODULE_NAME)" Optional
# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
# }
# }
# }
#
############################################################################
[Rule.Common.SEC]
FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi
}
[Rule.Common.PEI_CORE]
FILE PEI_CORE = $(NAMED_GUID) {
TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING ="$(MODULE_NAME)" Optional
}
[Rule.Common.PEIM]
FILE PEIM = $(NAMED_GUID) {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.PEIM.TIANOCOMPRESSED]
FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
}
[Rule.Common.DXE_CORE]
FILE DXE_CORE = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.UEFI_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.DXE_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.DXE_RUNTIME_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.UEFI_APPLICATION]
FILE APPLICATION = $(NAMED_GUID) {
UI STRING ="$(MODULE_NAME)" Optional
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
}
[Rule.Common.UEFI_DRIVER.BINARY]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional |.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_APPLICATION.BINARY]
FILE APPLICATION = $(NAMED_GUID) {
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
# FLASH layout file for ARM VE.
#
# Copyright (c) 2011, ARM Limited. All rights reserved.
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into the Flash Device Image. Each FD section
# defines one flash "device" image. A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash" image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################
[FD.RTSM_VE_Cortex-A15_MPCore_EFI]
BaseAddress = 0x08000000|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.
Size = 0x00280000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
ErasePolarity = 1
# This one is tricky, it must be: BlockSize * NumBlocks = Size
BlockSize = 0x00001000
NumBlocks = 0x280
################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################
0x00000000|0x00080000
gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
FV = FVMAIN_SEC
0x00080000|0x00280000
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT
################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file. This section also defines order the components and modules are positioned
# within the image. The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.FVMAIN_SEC]
FvAlignment = 8
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
INF ArmPlatformPkg/Sec/Sec.inf
[FV.FvMain]
BlockSize = 0x40
NumBlocks = 0 # This FV gets compressed so make it just big enough
FvAlignment = 8 # FV alignment and FV attributes setting.
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
INF MdeModulePkg/Core/Dxe/DxeMain.inf
#
# PI DXE Drivers producing Architectural Protocols (EFI Services)
#
INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
#
# Multiple Console IO support
#
INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
INF EmbeddedPkg/SerialDxe/SerialDxe.inf
INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf
INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
#
# Semi-hosting filesystem
#
INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
#
# FAT filesystem + GPT/MBR partitioning
#
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
INF FatBinPkg/EnhancedFatDxe/Fat.inf
INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
#
# Multimedia Card Interface
#
INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf
#
# UEFI application (Shell Embedded Boot Loader)
#
INF ShellBinPkg/UefiShell/UefiShell.inf
#
# Bds
#
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF ArmPlatformPkg/Bds/Bds.inf
[FV.FVMAIN_COMPACT]
FvAlignment = 8
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
!if $(EDK2_SKIP_PEICORE) == 1
INF ArmPlatformPkg/PrePi/PeiMPCore.inf
!else
INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
INF MdeModulePkg/Core/Pei/PeiMain.inf
INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
INF ArmPkg/Drivers/CpuPei/CpuPei.inf
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
!endif
FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
SECTION FV_IMAGE = FVMAIN
}
}
################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################
############################################################################
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
############################################################################
#
#[Rule.Common.DXE_DRIVER]
# FILE DRIVER = $(NAMED_GUID) {
# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
# COMPRESS PI_STD {
# GUIDED {
# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
# UI STRING="$(MODULE_NAME)" Optional
# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
# }
# }
# }
#
############################################################################
[Rule.Common.SEC]
FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi
}
[Rule.Common.PEI_CORE]
FILE PEI_CORE = $(NAMED_GUID) {
TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING ="$(MODULE_NAME)" Optional
}
[Rule.Common.PEIM]
FILE PEIM = $(NAMED_GUID) {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.PEIM.TIANOCOMPRESSED]
FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
}
[Rule.Common.DXE_CORE]
FILE DXE_CORE = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.UEFI_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.DXE_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.DXE_RUNTIME_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.UEFI_APPLICATION]
FILE APPLICATION = $(NAMED_GUID) {
UI STRING ="$(MODULE_NAME)" Optional
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
}
[Rule.Common.UEFI_DRIVER.BINARY]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional |.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_APPLICATION.BINARY]
FILE APPLICATION = $(NAMED_GUID) {
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}

110
ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA9x4/ArmVExpressLib.inf
View File

@@ -1,55 +1,55 @@
#/* @file
# Copyright (c) 2011-2012, ARM Limited. All rights reserved.
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#*/
[Defines]
INF_VERSION = 0x00010005
BASE_NAME = CTA9x4ArmVExpressLib
FILE_GUID = b16c63a0-f417-11df-b3af-0002a5d5c51b
MODULE_TYPE = BASE
VERSION_STRING = 1.0
LIBRARY_CLASS = ArmPlatformLib
[Packages]
MdePkg/MdePkg.dec
MdeModulePkg/MdeModulePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
ArmPkg/ArmPkg.dec
ArmPlatformPkg/ArmPlatformPkg.dec
[LibraryClasses]
IoLib
ArmLib
ArmTrustZoneLib
MemoryAllocationLib
PL341DmcLib
PL301AxiLib
L2X0CacheLib
SerialPortLib
[Sources.common]
CTA9x4.c
CTA9x4Mem.c
[FeaturePcd]
gEmbeddedTokenSpaceGuid.PcdCacheEnable
gArmPlatformTokenSpaceGuid.PcdNorFlashRemapping
[FixedPcd]
gArmTokenSpaceGuid.PcdTrustzoneSupport
gArmTokenSpaceGuid.PcdSystemMemoryBase
gArmTokenSpaceGuid.PcdSystemMemorySize
gArmTokenSpaceGuid.PcdL2x0ControllerBase
gArmTokenSpaceGuid.PcdArmPrimaryCoreMask
gArmTokenSpaceGuid.PcdArmPrimaryCore
#/* @file
# Copyright (c) 2011-2012, ARM Limited. All rights reserved.
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#*/
[Defines]
INF_VERSION = 0x00010005
BASE_NAME = CTA9x4ArmVExpressLib
FILE_GUID = b16c63a0-f417-11df-b3af-0002a5d5c51b
MODULE_TYPE = BASE
VERSION_STRING = 1.0
LIBRARY_CLASS = ArmPlatformLib
[Packages]
MdePkg/MdePkg.dec
MdeModulePkg/MdeModulePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
ArmPkg/ArmPkg.dec
ArmPlatformPkg/ArmPlatformPkg.dec
[LibraryClasses]
IoLib
ArmLib
ArmTrustZoneLib
MemoryAllocationLib
PL341DmcLib
PL301AxiLib
L2X0CacheLib
SerialPortLib
[Sources.common]
CTA9x4.c
CTA9x4Mem.c
[FeaturePcd]
gEmbeddedTokenSpaceGuid.PcdCacheEnable
gArmPlatformTokenSpaceGuid.PcdNorFlashRemapping
[FixedPcd]
gArmTokenSpaceGuid.PcdTrustzoneSupport
gArmTokenSpaceGuid.PcdSystemMemoryBase
gArmTokenSpaceGuid.PcdSystemMemorySize
gArmTokenSpaceGuid.PcdL2x0ControllerBase
gArmTokenSpaceGuid.PcdArmPrimaryCoreMask
gArmTokenSpaceGuid.PcdArmPrimaryCore

428
ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibCTA9x4/CTA9x4.c
View File

@@ -1,214 +1,214 @@
/** @file
*
* Copyright (c) 2011-2012, ARM Limited. All rights reserved.
*
* This program and the accompanying materials
* are licensed and made available under the terms and conditions of the BSD License
* which accompanies this distribution. The full text of the license may be found at
* http://opensource.org/licenses/bsd-license.php
*
* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
*
**/
#include <Library/IoLib.h>
#include <Library/ArmPlatformLib.h>
#include <Library/DebugLib.h>
#include <Library/PcdLib.h>
#include <Library/SerialPortLib.h>
#include <Drivers/PL341Dmc.h>
#include <Drivers/PL301Axi.h>
#include <Drivers/SP804Timer.h>
#include <Ppi/ArmMpCoreInfo.h>
#include <ArmPlatform.h>
#define SerialPrint(txt) SerialPortWrite ((UINT8*)(txt), AsciiStrLen(txt)+1);
ARM_CORE_INFO mVersatileExpressMpCoreInfoCTA9x4[] = {
{
// Cluster 0, Core 0
0x0, 0x0,
// MP Core MailBox Set/Get/Clear Addresses and Clear Value
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG,
(UINT64)0xFFFFFFFF
},
{
// Cluster 0, Core 1
0x0, 0x1,
// MP Core MailBox Set/Get/Clear Addresses and Clear Value
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG,
(UINT64)0xFFFFFFFF
},
{
// Cluster 0, Core 2
0x0, 0x2,
// MP Core MailBox Set/Get/Clear Addresses and Clear Value
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG,
(UINT64)0xFFFFFFFF
},
{
// Cluster 0, Core 3
0x0, 0x3,
// MP Core MailBox Set/Get/Clear Addresses and Clear Value
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG,
(UINT64)0xFFFFFFFF
}
};
// DDR2 timings
PL341_DMC_CONFIG DDRTimings = {
.MaxChip = 1,
.IsUserCfg = TRUE,
.User0Cfg = 0x7C924924,
.User2Cfg = (TC_UIOLHXC_VALUE << TC_UIOLHNC_SHIFT) | (TC_UIOLHXC_VALUE << TC_UIOLHPC_SHIFT) | (0x1 << TC_UIOHOCT_SHIFT) | (0x1 << TC_UIOHSTOP_SHIFT),
.HasQos = TRUE,
.RefreshPeriod = 0x3D0,
.CasLatency = 0x8,
.WriteLatency = 0x3,
.t_mrd = 0x2,
.t_ras = 0xA,
.t_rc = 0xE,
.t_rcd = 0x104,
.t_rfc = 0x2f32,
.t_rp = 0x14,
.t_rrd = 0x2,
.t_wr = 0x4,
.t_wtr = 0x2,
.t_xp = 0x2,
.t_xsr = 0xC8,
.t_esr = 0x14,
.MemoryCfg = DMC_MEMORY_CONFIG_ACTIVE_CHIP_1 | DMC_MEMORY_CONFIG_BURST_4 |
DMC_MEMORY_CONFIG_ROW_ADDRESS_15 | DMC_MEMORY_CONFIG_COLUMN_ADDRESS_10,
.MemoryCfg2 = DMC_MEMORY_CFG2_DQM_INIT | DMC_MEMORY_CFG2_CKE_INIT |
DMC_MEMORY_CFG2_BANK_BITS_3 | DMC_MEMORY_CFG2_MEM_WIDTH_32,
.MemoryCfg3 = 0x00000001,
.ChipCfg0 = 0x00010000,
.t_faw = 0x00000A0D,
.ModeReg = DDR2_MR_BURST_LENGTH_4 | DDR2_MR_CAS_LATENCY_4 | DDR2_MR_WR_CYCLES_4,
.ExtModeReg = DDR_EMR_RTT_50R | (DDR_EMR_ODS_VAL << DDR_EMR_ODS_MASK),
};
/**
Return the current Boot Mode
This function returns the boot reason on the platform
@return Return the current Boot Mode of the platform
**/
EFI_BOOT_MODE
ArmPlatformGetBootMode (
VOID
)
{
if (MmioRead32(ARM_VE_SYS_FLAGS_NV_REG) == 0) {
return BOOT_WITH_FULL_CONFIGURATION;
} else {
return BOOT_ON_S2_RESUME;
}
}
/**
Initialize controllers that must setup in the normal world
This function is called by the ArmPlatformPkg/PrePi or ArmPlatformPkg/PlatformPei
in the PEI phase.
**/
RETURN_STATUS
ArmPlatformInitialize (
IN UINTN MpId
)
{
if (!IS_PRIMARY_CORE(MpId)) {
return RETURN_SUCCESS;
}
// Configure periodic timer (TIMER0) for 1MHz operation
MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER0_TIMCLK);
// Configure 1MHz clock
MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER1_TIMCLK);
// configure SP810 to use 1MHz clock and disable
MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER2_EN, SP810_SYS_CTRL_TIMER2_TIMCLK);
// Configure SP810 to use 1MHz clock and disable
MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER3_EN, SP810_SYS_CTRL_TIMER3_TIMCLK);
return RETURN_SUCCESS;
}
/**
Initialize the system (or sometimes called permanent) memory
This memory is generally represented by the DRAM.
**/
VOID
ArmPlatformInitializeSystemMemory (
VOID
)
{
UINT32 Value;
// Memory Map remapping
if (FeaturePcdGet(PcdNorFlashRemapping)) {
SerialPrint ("Secure ROM at 0x0\n\r");
} else {
Value = MmioRead32(ARM_VE_SYS_CFGRW1_REG); //Scc - CFGRW1
// Remap the DRAM to 0x0
MmioWrite32(ARM_VE_SYS_CFGRW1_REG, (Value & 0x0FFFFFFF) | ARM_VE_CFGRW1_REMAP_DRAM);
}
PL341DmcInit(ARM_VE_DMC_BASE, &DDRTimings);
PL301AxiInit(ARM_VE_FAXI_BASE);
}
EFI_STATUS
PrePeiCoreGetMpCoreInfo (
OUT UINTN *CoreCount,
OUT ARM_CORE_INFO **ArmCoreTable
)
{
*CoreCount = sizeof(mVersatileExpressMpCoreInfoCTA9x4) / sizeof(ARM_CORE_INFO);
*ArmCoreTable = mVersatileExpressMpCoreInfoCTA9x4;
return EFI_SUCCESS;
}
// Needs to be declared in the file. Otherwise gArmMpCoreInfoPpiGuid is undefined in the contect of PrePeiCore
EFI_GUID mArmMpCoreInfoPpiGuid = ARM_MP_CORE_INFO_PPI_GUID;
ARM_MP_CORE_INFO_PPI mMpCoreInfoPpi = { PrePeiCoreGetMpCoreInfo };
EFI_PEI_PPI_DESCRIPTOR gPlatformPpiTable[] = {
{
EFI_PEI_PPI_DESCRIPTOR_PPI,
&mArmMpCoreInfoPpiGuid,
&mMpCoreInfoPpi
}
};
VOID
ArmPlatformGetPlatformPpiList (
OUT UINTN *PpiListSize,
OUT EFI_PEI_PPI_DESCRIPTOR **PpiList
)
{
*PpiListSize = sizeof(gPlatformPpiTable);
*PpiList = gPlatformPpiTable;
}
/** @file
*
* Copyright (c) 2011-2012, ARM Limited. All rights reserved.
*
* This program and the accompanying materials
* are licensed and made available under the terms and conditions of the BSD License
* which accompanies this distribution. The full text of the license may be found at
* http://opensource.org/licenses/bsd-license.php
*
* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
*
**/
#include <Library/IoLib.h>
#include <Library/ArmPlatformLib.h>
#include <Library/DebugLib.h>
#include <Library/PcdLib.h>
#include <Library/SerialPortLib.h>
#include <Drivers/PL341Dmc.h>
#include <Drivers/PL301Axi.h>
#include <Drivers/SP804Timer.h>
#include <Ppi/ArmMpCoreInfo.h>
#include <ArmPlatform.h>
#define SerialPrint(txt) SerialPortWrite ((UINT8*)(txt), AsciiStrLen(txt)+1);
ARM_CORE_INFO mVersatileExpressMpCoreInfoCTA9x4[] = {
{
// Cluster 0, Core 0
0x0, 0x0,
// MP Core MailBox Set/Get/Clear Addresses and Clear Value
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG,
(UINT64)0xFFFFFFFF
},
{
// Cluster 0, Core 1
0x0, 0x1,
// MP Core MailBox Set/Get/Clear Addresses and Clear Value
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG,
(UINT64)0xFFFFFFFF
},
{
// Cluster 0, Core 2
0x0, 0x2,
// MP Core MailBox Set/Get/Clear Addresses and Clear Value
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG,
(UINT64)0xFFFFFFFF
},
{
// Cluster 0, Core 3
0x0, 0x3,
// MP Core MailBox Set/Get/Clear Addresses and Clear Value
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG,
(UINT64)0xFFFFFFFF
}
};
// DDR2 timings
PL341_DMC_CONFIG DDRTimings = {
.MaxChip = 1,
.IsUserCfg = TRUE,
.User0Cfg = 0x7C924924,
.User2Cfg = (TC_UIOLHXC_VALUE << TC_UIOLHNC_SHIFT) | (TC_UIOLHXC_VALUE << TC_UIOLHPC_SHIFT) | (0x1 << TC_UIOHOCT_SHIFT) | (0x1 << TC_UIOHSTOP_SHIFT),
.HasQos = TRUE,
.RefreshPeriod = 0x3D0,
.CasLatency = 0x8,
.WriteLatency = 0x3,
.t_mrd = 0x2,
.t_ras = 0xA,
.t_rc = 0xE,
.t_rcd = 0x104,
.t_rfc = 0x2f32,
.t_rp = 0x14,
.t_rrd = 0x2,
.t_wr = 0x4,
.t_wtr = 0x2,
.t_xp = 0x2,
.t_xsr = 0xC8,
.t_esr = 0x14,
.MemoryCfg = DMC_MEMORY_CONFIG_ACTIVE_CHIP_1 | DMC_MEMORY_CONFIG_BURST_4 |
DMC_MEMORY_CONFIG_ROW_ADDRESS_15 | DMC_MEMORY_CONFIG_COLUMN_ADDRESS_10,
.MemoryCfg2 = DMC_MEMORY_CFG2_DQM_INIT | DMC_MEMORY_CFG2_CKE_INIT |
DMC_MEMORY_CFG2_BANK_BITS_3 | DMC_MEMORY_CFG2_MEM_WIDTH_32,
.MemoryCfg3 = 0x00000001,
.ChipCfg0 = 0x00010000,
.t_faw = 0x00000A0D,
.ModeReg = DDR2_MR_BURST_LENGTH_4 | DDR2_MR_CAS_LATENCY_4 | DDR2_MR_WR_CYCLES_4,
.ExtModeReg = DDR_EMR_RTT_50R | (DDR_EMR_ODS_VAL << DDR_EMR_ODS_MASK),
};
/**
Return the current Boot Mode
This function returns the boot reason on the platform
@return Return the current Boot Mode of the platform
**/
EFI_BOOT_MODE
ArmPlatformGetBootMode (
VOID
)
{
if (MmioRead32(ARM_VE_SYS_FLAGS_NV_REG) == 0) {
return BOOT_WITH_FULL_CONFIGURATION;
} else {
return BOOT_ON_S2_RESUME;
}
}
/**
Initialize controllers that must setup in the normal world
This function is called by the ArmPlatformPkg/PrePi or ArmPlatformPkg/PlatformPei
in the PEI phase.
**/
RETURN_STATUS
ArmPlatformInitialize (
IN UINTN MpId
)
{
if (!IS_PRIMARY_CORE(MpId)) {
return RETURN_SUCCESS;
}
// Configure periodic timer (TIMER0) for 1MHz operation
MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER0_TIMCLK);
// Configure 1MHz clock
MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER1_TIMCLK);
// configure SP810 to use 1MHz clock and disable
MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER2_EN, SP810_SYS_CTRL_TIMER2_TIMCLK);
// Configure SP810 to use 1MHz clock and disable
MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER3_EN, SP810_SYS_CTRL_TIMER3_TIMCLK);
return RETURN_SUCCESS;
}
/**
Initialize the system (or sometimes called permanent) memory
This memory is generally represented by the DRAM.
**/
VOID
ArmPlatformInitializeSystemMemory (
VOID
)
{
UINT32 Value;
// Memory Map remapping
if (FeaturePcdGet(PcdNorFlashRemapping)) {
SerialPrint ("Secure ROM at 0x0\n\r");
} else {
Value = MmioRead32(ARM_VE_SYS_CFGRW1_REG); //Scc - CFGRW1
// Remap the DRAM to 0x0
MmioWrite32(ARM_VE_SYS_CFGRW1_REG, (Value & 0x0FFFFFFF) | ARM_VE_CFGRW1_REMAP_DRAM);
}
PL341DmcInit(ARM_VE_DMC_BASE, &DDRTimings);
PL301AxiInit(ARM_VE_FAXI_BASE);
}
EFI_STATUS
PrePeiCoreGetMpCoreInfo (
OUT UINTN *CoreCount,
OUT ARM_CORE_INFO **ArmCoreTable
)
{
*CoreCount = sizeof(mVersatileExpressMpCoreInfoCTA9x4) / sizeof(ARM_CORE_INFO);
*ArmCoreTable = mVersatileExpressMpCoreInfoCTA9x4;
return EFI_SUCCESS;
}
// Needs to be declared in the file. Otherwise gArmMpCoreInfoPpiGuid is undefined in the contect of PrePeiCore
EFI_GUID mArmMpCoreInfoPpiGuid = ARM_MP_CORE_INFO_PPI_GUID;
ARM_MP_CORE_INFO_PPI mMpCoreInfoPpi = { PrePeiCoreGetMpCoreInfo };
EFI_PEI_PPI_DESCRIPTOR gPlatformPpiTable[] = {
{
EFI_PEI_PPI_DESCRIPTOR_PPI,
&mArmMpCoreInfoPpiGuid,
&mMpCoreInfoPpi
}
};
VOID
ArmPlatformGetPlatformPpiList (
OUT UINTN *PpiListSize,
OUT EFI_PEI_PPI_DESCRIPTOR **PpiList
)
{
*PpiListSize = sizeof(gPlatformPpiTable);
*PpiList = gPlatformPpiTable;
}

326
ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibRTSM/RTSM.c
View File

@@ -1,163 +1,163 @@
/** @file
*
* Copyright (c) 2011-2012, ARM Limited. All rights reserved.
*
* This program and the accompanying materials
* are licensed and made available under the terms and conditions of the BSD License
* which accompanies this distribution. The full text of the license may be found at
* http://opensource.org/licenses/bsd-license.php
*
* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
*
**/
#include <Library/IoLib.h>
#include <Library/ArmPlatformLib.h>
#include <Library/DebugLib.h>
#include <Library/PcdLib.h>
#include <Ppi/ArmMpCoreInfo.h>
#include <ArmPlatform.h>
UINTN
ArmGetCpuCountPerCluster (
VOID
);
ARM_CORE_INFO mVersatileExpressMpCoreInfoTable[] = {
{
// Cluster 0, Core 0
0x0, 0x0,
// MP Core MailBox Set/Get/Clear Addresses and Clear Value
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG,
(UINT64)0xFFFFFFFF
},
{
// Cluster 0, Core 1
0x0, 0x1,
// MP Core MailBox Set/Get/Clear Addresses and Clear Value
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG,
(UINT64)0xFFFFFFFF
},
{
// Cluster 0, Core 2
0x0, 0x2,
// MP Core MailBox Set/Get/Clear Addresses and Clear Value
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG,
(UINT64)0xFFFFFFFF
},
{
// Cluster 0, Core 3
0x0, 0x3,
// MP Core MailBox Set/Get/Clear Addresses and Clear Value
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG,
(UINT64)0xFFFFFFFF
}
};
/**
Return the current Boot Mode
This function returns the boot reason on the platform
@return Return the current Boot Mode of the platform
**/
EFI_BOOT_MODE
ArmPlatformGetBootMode (
VOID
)
{
return BOOT_WITH_FULL_CONFIGURATION;
}
/**
Initialize controllers that must setup in the normal world
This function is called by the ArmPlatformPkg/Pei or ArmPlatformPkg/Pei/PlatformPeim
in the PEI phase.
**/
RETURN_STATUS
ArmPlatformInitialize (
IN UINTN MpId
)
{
if (!IS_PRIMARY_CORE(MpId)) {
return RETURN_SUCCESS;
}
// Disable memory remapping and return to normal mapping
MmioOr32 (SP810_CTRL_BASE, BIT8);
return RETURN_SUCCESS;
}
/**
Initialize the system (or sometimes called permanent) memory
This memory is generally represented by the DRAM.
**/
VOID
ArmPlatformInitializeSystemMemory (
VOID
)
{
// Nothing to do here
}
EFI_STATUS
PrePeiCoreGetMpCoreInfo (
OUT UINTN *CoreCount,
OUT ARM_CORE_INFO **ArmCoreTable
)
{
UINT32 ProcType;
ProcType = MmioRead32 (ARM_VE_SYS_PROCID0_REG) & ARM_VE_SYS_PROC_ID_MASK;
if ((ProcType == ARM_VE_SYS_PROC_ID_CORTEX_A9) || (ProcType == ARM_VE_SYS_PROC_ID_CORTEX_A15)) {
// Only support one cluster
*CoreCount = ArmGetCpuCountPerCluster ();
*ArmCoreTable = mVersatileExpressMpCoreInfoTable;
return EFI_SUCCESS;
} else {
return EFI_UNSUPPORTED;
}
}
// Needs to be declared in the file. Otherwise gArmMpCoreInfoPpiGuid is undefined in the contect of PrePeiCore
EFI_GUID mArmMpCoreInfoPpiGuid = ARM_MP_CORE_INFO_PPI_GUID;
ARM_MP_CORE_INFO_PPI mMpCoreInfoPpi = { PrePeiCoreGetMpCoreInfo };
EFI_PEI_PPI_DESCRIPTOR gPlatformPpiTable[] = {
{
EFI_PEI_PPI_DESCRIPTOR_PPI,
&mArmMpCoreInfoPpiGuid,
&mMpCoreInfoPpi
}
};
VOID
ArmPlatformGetPlatformPpiList (
OUT UINTN *PpiListSize,
OUT EFI_PEI_PPI_DESCRIPTOR **PpiList
)
{
*PpiListSize = sizeof(gPlatformPpiTable);
*PpiList = gPlatformPpiTable;
}
/** @file
*
* Copyright (c) 2011-2012, ARM Limited. All rights reserved.
*
* This program and the accompanying materials
* are licensed and made available under the terms and conditions of the BSD License
* which accompanies this distribution. The full text of the license may be found at
* http://opensource.org/licenses/bsd-license.php
*
* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
*
**/
#include <Library/IoLib.h>
#include <Library/ArmPlatformLib.h>
#include <Library/DebugLib.h>
#include <Library/PcdLib.h>
#include <Ppi/ArmMpCoreInfo.h>
#include <ArmPlatform.h>
UINTN
ArmGetCpuCountPerCluster (
VOID
);
ARM_CORE_INFO mVersatileExpressMpCoreInfoTable[] = {
{
// Cluster 0, Core 0
0x0, 0x0,
// MP Core MailBox Set/Get/Clear Addresses and Clear Value
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG,
(UINT64)0xFFFFFFFF
},
{
// Cluster 0, Core 1
0x0, 0x1,
// MP Core MailBox Set/Get/Clear Addresses and Clear Value
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG,
(UINT64)0xFFFFFFFF
},
{
// Cluster 0, Core 2
0x0, 0x2,
// MP Core MailBox Set/Get/Clear Addresses and Clear Value
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG,
(UINT64)0xFFFFFFFF
},
{
// Cluster 0, Core 3
0x0, 0x3,
// MP Core MailBox Set/Get/Clear Addresses and Clear Value
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG,
(EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG,
(UINT64)0xFFFFFFFF
}
};
/**
Return the current Boot Mode
This function returns the boot reason on the platform
@return Return the current Boot Mode of the platform
**/
EFI_BOOT_MODE
ArmPlatformGetBootMode (
VOID
)
{
return BOOT_WITH_FULL_CONFIGURATION;
}
/**
Initialize controllers that must setup in the normal world
This function is called by the ArmPlatformPkg/Pei or ArmPlatformPkg/Pei/PlatformPeim
in the PEI phase.
**/
RETURN_STATUS
ArmPlatformInitialize (
IN UINTN MpId
)
{
if (!IS_PRIMARY_CORE(MpId)) {
return RETURN_SUCCESS;
}
// Disable memory remapping and return to normal mapping
MmioOr32 (SP810_CTRL_BASE, BIT8);
return RETURN_SUCCESS;
}
/**
Initialize the system (or sometimes called permanent) memory
This memory is generally represented by the DRAM.
**/
VOID
ArmPlatformInitializeSystemMemory (
VOID
)
{
// Nothing to do here
}
EFI_STATUS
PrePeiCoreGetMpCoreInfo (
OUT UINTN *CoreCount,
OUT ARM_CORE_INFO **ArmCoreTable
)
{
UINT32 ProcType;
ProcType = MmioRead32 (ARM_VE_SYS_PROCID0_REG) & ARM_VE_SYS_PROC_ID_MASK;
if ((ProcType == ARM_VE_SYS_PROC_ID_CORTEX_A9) || (ProcType == ARM_VE_SYS_PROC_ID_CORTEX_A15)) {
// Only support one cluster
*CoreCount = ArmGetCpuCountPerCluster ();
*ArmCoreTable = mVersatileExpressMpCoreInfoTable;
return EFI_SUCCESS;
} else {
return EFI_UNSUPPORTED;
}
}
// Needs to be declared in the file. Otherwise gArmMpCoreInfoPpiGuid is undefined in the contect of PrePeiCore
EFI_GUID mArmMpCoreInfoPpiGuid = ARM_MP_CORE_INFO_PPI_GUID;
ARM_MP_CORE_INFO_PPI mMpCoreInfoPpi = { PrePeiCoreGetMpCoreInfo };
EFI_PEI_PPI_DESCRIPTOR gPlatformPpiTable[] = {
{
EFI_PEI_PPI_DESCRIPTOR_PPI,
&mArmMpCoreInfoPpiGuid,
&mMpCoreInfoPpi
}
};
VOID
ArmPlatformGetPlatformPpiList (
OUT UINTN *PpiListSize,
OUT EFI_PEI_PPI_DESCRIPTOR **PpiList
)
{
*PpiListSize = sizeof(gPlatformPpiTable);
*PpiList = gPlatformPpiTable;
}

2
ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibRTSM/RTSMMem.c
View File

@@ -103,7 +103,7 @@ ArmPlatformGetVirtualMemoryMap (
VirtualMemoryTable[++Index].PhysicalBase = ARM_VE_SMB_PERIPH_BASE;
VirtualMemoryTable[Index].VirtualBase = ARM_VE_SMB_PERIPH_BASE;
VirtualMemoryTable[Index].Length = 2 * ARM_VE_SMB_PERIPH_SZ;
VirtualMemoryTable[Index].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
VirtualMemoryTable[Index].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
//TODO:This should be enabled for final release. Right now, ARM VE RTSM crashes.
// // If a Logic Tile is connected to The ARM Versatile Express Motherboard

296
ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressSecLibCTA9x4/CTA9x4Sec.c
View File

@@ -1,148 +1,148 @@
/** @file
*
* Copyright (c) 2011-2012, ARM Limited. All rights reserved.
*
* This program and the accompanying materials
* are licensed and made available under the terms and conditions of the BSD License
* which accompanies this distribution. The full text of the license may be found at
* http://opensource.org/licenses/bsd-license.php
*
* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
*
**/
#include <Library/ArmPlatformLib.h>
#include <Library/ArmPlatformSysConfigLib.h>
#include <Library/DebugLib.h>
#include <Library/IoLib.h>
#include <Library/PcdLib.h>
#include <Drivers/ArmTrustzone.h>
#include <Drivers/PL310L2Cache.h>
#include <ArmPlatform.h>
/**
Initialize the Secure peripherals and memory regions
If Trustzone is supported by your platform then this function makes the required initialization
of the secure peripherals and memory regions.
**/
VOID
ArmPlatformSecTrustzoneInit (
IN UINTN MpId
)
{
// Nothing to do
if (!IS_PRIMARY_CORE(MpId)) {
return;
}
//
// Setup TZ Protection Controller
//
if (MmioRead32(ARM_VE_SYS_CFGRW1_REG) & ARM_VE_CFGRW1_TZASC_EN_BIT_MASK) {
ASSERT (PcdGetBool (PcdTrustzoneSupport) == TRUE);
} else {
ASSERT (PcdGetBool (PcdTrustzoneSupport) == FALSE);
}
// Set Non Secure access for all devices
TZPCSetDecProtBits(ARM_VE_TZPC_BASE, TZPC_DECPROT_0, 0xFFFFFFFF);
TZPCSetDecProtBits(ARM_VE_TZPC_BASE, TZPC_DECPROT_1, 0xFFFFFFFF);
TZPCSetDecProtBits(ARM_VE_TZPC_BASE, TZPC_DECPROT_2, 0xFFFFFFFF);
// Remove Non secure access to secure devices
TZPCClearDecProtBits(ARM_VE_TZPC_BASE, TZPC_DECPROT_0,
ARM_VE_DECPROT_BIT_TZPC | ARM_VE_DECPROT_BIT_DMC_TZASC | ARM_VE_DECPROT_BIT_NMC_TZASC | ARM_VE_DECPROT_BIT_SMC_TZASC);
TZPCClearDecProtBits(ARM_VE_TZPC_BASE, TZPC_DECPROT_2,
ARM_VE_DECPROT_BIT_EXT_MAST_TZ | ARM_VE_DECPROT_BIT_DMC_TZASC_LOCK | ARM_VE_DECPROT_BIT_NMC_TZASC_LOCK | ARM_VE_DECPROT_BIT_SMC_TZASC_LOCK);
//
// Setup TZ Address Space Controller for the SMC. Create 5 Non Secure regions (NOR0, NOR1, SRAM, SMC Peripheral regions)
//
// NOR Flash 0 non secure (BootMon)
TZASCSetRegion(ARM_VE_TZASC_BASE,1,TZASC_REGION_ENABLED,
ARM_VE_SMB_NOR0_BASE,0,
TZASC_REGION_SIZE_64MB, TZASC_REGION_SECURITY_NSRW);
// NOR Flash 1. The first half of the NOR Flash1 must be secure for the secure firmware (sec_uefi.bin)
if (PcdGetBool (PcdTrustzoneSupport) == TRUE) {
//Note: Your OS Kernel must be aware of the secure regions before to enable this region
TZASCSetRegion(ARM_VE_TZASC_BASE,2,TZASC_REGION_ENABLED,
ARM_VE_SMB_NOR1_BASE + SIZE_32MB,0,
TZASC_REGION_SIZE_32MB, TZASC_REGION_SECURITY_NSRW);
} else {
TZASCSetRegion(ARM_VE_TZASC_BASE,2,TZASC_REGION_ENABLED,
ARM_VE_SMB_NOR1_BASE,0,
TZASC_REGION_SIZE_64MB, TZASC_REGION_SECURITY_NSRW);
}
// Base of SRAM. Only half of SRAM in Non Secure world
// First half non secure (16MB) + Second Half secure (16MB) = 32MB of SRAM
if (PcdGetBool (PcdTrustzoneSupport) == TRUE) {
//Note: Your OS Kernel must be aware of the secure regions before to enable this region
TZASCSetRegion(ARM_VE_TZASC_BASE,3,TZASC_REGION_ENABLED,
ARM_VE_SMB_SRAM_BASE,0,
TZASC_REGION_SIZE_16MB, TZASC_REGION_SECURITY_NSRW);
} else {
TZASCSetRegion(ARM_VE_TZASC_BASE,3,TZASC_REGION_ENABLED,
ARM_VE_SMB_SRAM_BASE,0,
TZASC_REGION_SIZE_32MB, TZASC_REGION_SECURITY_NSRW);
}
// Memory Mapped Peripherals. All in non secure world
TZASCSetRegion(ARM_VE_TZASC_BASE,4,TZASC_REGION_ENABLED,
ARM_VE_SMB_PERIPH_BASE,0,
TZASC_REGION_SIZE_64MB, TZASC_REGION_SECURITY_NSRW);
// MotherBoard Peripherals and On-chip peripherals.
TZASCSetRegion(ARM_VE_TZASC_BASE,5,TZASC_REGION_ENABLED,
ARM_VE_SMB_MB_ON_CHIP_PERIPH_BASE,0,
TZASC_REGION_SIZE_256MB, TZASC_REGION_SECURITY_NSRW);
}
/**
Initialize controllers that must setup at the early stage
Some peripherals must be initialized in Secure World.
For example, some L2x0 requires to be initialized in Secure World
**/
RETURN_STATUS
ArmPlatformSecInitialize (
IN UINTN MpId
)
{
// If it is not the primary core then there is nothing to do
if (!IS_PRIMARY_CORE(MpId)) {
return RETURN_SUCCESS;
}
// The L2x0 controller must be intialize in Secure World
L2x0CacheInit(PcdGet32(PcdL2x0ControllerBase),
PL310_TAG_LATENCIES(L2x0_LATENCY_8_CYCLES,L2x0_LATENCY_8_CYCLES,L2x0_LATENCY_8_CYCLES),
PL310_DATA_LATENCIES(L2x0_LATENCY_8_CYCLES,L2x0_LATENCY_8_CYCLES,L2x0_LATENCY_8_CYCLES),
0,~0, // Use default setting for the Auxiliary Control Register
FALSE);
// Initialize the System Configuration
ArmPlatformSysConfigInitialize ();
// If we skip the PEI Core we could want to initialize the DRAM in the SEC phase.
// If we are in standalone, we need the initialization to copy the UEFI firmware into DRAM
if ((FeaturePcdGet (PcdSystemMemoryInitializeInSec)) || (FeaturePcdGet (PcdStandalone) == FALSE)) {
// If it is not a standalone build ensure the PcdSystemMemoryInitializeInSec has been set
ASSERT(FeaturePcdGet (PcdSystemMemoryInitializeInSec) == TRUE);
// Initialize system memory (DRAM)
ArmPlatformInitializeSystemMemory ();
}
return RETURN_SUCCESS;
}
/** @file
*
* Copyright (c) 2011-2012, ARM Limited. All rights reserved.
*
* This program and the accompanying materials
* are licensed and made available under the terms and conditions of the BSD License
* which accompanies this distribution. The full text of the license may be found at
* http://opensource.org/licenses/bsd-license.php
*
* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
*
**/
#include <Library/ArmPlatformLib.h>
#include <Library/ArmPlatformSysConfigLib.h>
#include <Library/DebugLib.h>
#include <Library/IoLib.h>
#include <Library/PcdLib.h>
#include <Drivers/ArmTrustzone.h>
#include <Drivers/PL310L2Cache.h>
#include <ArmPlatform.h>
/**
Initialize the Secure peripherals and memory regions
If Trustzone is supported by your platform then this function makes the required initialization
of the secure peripherals and memory regions.
**/
VOID
ArmPlatformSecTrustzoneInit (
IN UINTN MpId
)
{
// Nothing to do
if (!IS_PRIMARY_CORE(MpId)) {
return;
}
//
// Setup TZ Protection Controller
//
if (MmioRead32(ARM_VE_SYS_CFGRW1_REG) & ARM_VE_CFGRW1_TZASC_EN_BIT_MASK) {
ASSERT (PcdGetBool (PcdTrustzoneSupport) == TRUE);
} else {
ASSERT (PcdGetBool (PcdTrustzoneSupport) == FALSE);
}
// Set Non Secure access for all devices
TZPCSetDecProtBits(ARM_VE_TZPC_BASE, TZPC_DECPROT_0, 0xFFFFFFFF);
TZPCSetDecProtBits(ARM_VE_TZPC_BASE, TZPC_DECPROT_1, 0xFFFFFFFF);
TZPCSetDecProtBits(ARM_VE_TZPC_BASE, TZPC_DECPROT_2, 0xFFFFFFFF);
// Remove Non secure access to secure devices
TZPCClearDecProtBits(ARM_VE_TZPC_BASE, TZPC_DECPROT_0,
ARM_VE_DECPROT_BIT_TZPC | ARM_VE_DECPROT_BIT_DMC_TZASC | ARM_VE_DECPROT_BIT_NMC_TZASC | ARM_VE_DECPROT_BIT_SMC_TZASC);
TZPCClearDecProtBits(ARM_VE_TZPC_BASE, TZPC_DECPROT_2,
ARM_VE_DECPROT_BIT_EXT_MAST_TZ | ARM_VE_DECPROT_BIT_DMC_TZASC_LOCK | ARM_VE_DECPROT_BIT_NMC_TZASC_LOCK | ARM_VE_DECPROT_BIT_SMC_TZASC_LOCK);
//
// Setup TZ Address Space Controller for the SMC. Create 5 Non Secure regions (NOR0, NOR1, SRAM, SMC Peripheral regions)
//
// NOR Flash 0 non secure (BootMon)
TZASCSetRegion(ARM_VE_TZASC_BASE,1,TZASC_REGION_ENABLED,
ARM_VE_SMB_NOR0_BASE,0,
TZASC_REGION_SIZE_64MB, TZASC_REGION_SECURITY_NSRW);
// NOR Flash 1. The first half of the NOR Flash1 must be secure for the secure firmware (sec_uefi.bin)
if (PcdGetBool (PcdTrustzoneSupport) == TRUE) {
//Note: Your OS Kernel must be aware of the secure regions before to enable this region
TZASCSetRegion(ARM_VE_TZASC_BASE,2,TZASC_REGION_ENABLED,
ARM_VE_SMB_NOR1_BASE + SIZE_32MB,0,
TZASC_REGION_SIZE_32MB, TZASC_REGION_SECURITY_NSRW);
} else {
TZASCSetRegion(ARM_VE_TZASC_BASE,2,TZASC_REGION_ENABLED,
ARM_VE_SMB_NOR1_BASE,0,
TZASC_REGION_SIZE_64MB, TZASC_REGION_SECURITY_NSRW);
}
// Base of SRAM. Only half of SRAM in Non Secure world
// First half non secure (16MB) + Second Half secure (16MB) = 32MB of SRAM
if (PcdGetBool (PcdTrustzoneSupport) == TRUE) {
//Note: Your OS Kernel must be aware of the secure regions before to enable this region
TZASCSetRegion(ARM_VE_TZASC_BASE,3,TZASC_REGION_ENABLED,
ARM_VE_SMB_SRAM_BASE,0,
TZASC_REGION_SIZE_16MB, TZASC_REGION_SECURITY_NSRW);
} else {
TZASCSetRegion(ARM_VE_TZASC_BASE,3,TZASC_REGION_ENABLED,
ARM_VE_SMB_SRAM_BASE,0,
TZASC_REGION_SIZE_32MB, TZASC_REGION_SECURITY_NSRW);
}
// Memory Mapped Peripherals. All in non secure world
TZASCSetRegion(ARM_VE_TZASC_BASE,4,TZASC_REGION_ENABLED,
ARM_VE_SMB_PERIPH_BASE,0,
TZASC_REGION_SIZE_64MB, TZASC_REGION_SECURITY_NSRW);
// MotherBoard Peripherals and On-chip peripherals.
TZASCSetRegion(ARM_VE_TZASC_BASE,5,TZASC_REGION_ENABLED,
ARM_VE_SMB_MB_ON_CHIP_PERIPH_BASE,0,
TZASC_REGION_SIZE_256MB, TZASC_REGION_SECURITY_NSRW);
}
/**
Initialize controllers that must setup at the early stage
Some peripherals must be initialized in Secure World.
For example, some L2x0 requires to be initialized in Secure World
**/
RETURN_STATUS
ArmPlatformSecInitialize (
IN UINTN MpId
)
{
// If it is not the primary core then there is nothing to do
if (!IS_PRIMARY_CORE(MpId)) {
return RETURN_SUCCESS;
}
// The L2x0 controller must be intialize in Secure World
L2x0CacheInit(PcdGet32(PcdL2x0ControllerBase),
PL310_TAG_LATENCIES(L2x0_LATENCY_8_CYCLES,L2x0_LATENCY_8_CYCLES,L2x0_LATENCY_8_CYCLES),
PL310_DATA_LATENCIES(L2x0_LATENCY_8_CYCLES,L2x0_LATENCY_8_CYCLES,L2x0_LATENCY_8_CYCLES),
0,~0, // Use default setting for the Auxiliary Control Register
FALSE);
// Initialize the System Configuration
ArmPlatformSysConfigInitialize ();
// If we skip the PEI Core we could want to initialize the DRAM in the SEC phase.
// If we are in standalone, we need the initialization to copy the UEFI firmware into DRAM
if ((FeaturePcdGet (PcdSystemMemoryInitializeInSec)) || (FeaturePcdGet (PcdStandalone) == FALSE)) {
// If it is not a standalone build ensure the PcdSystemMemoryInitializeInSec has been set
ASSERT(FeaturePcdGet (PcdSystemMemoryInitializeInSec) == TRUE);
// Initialize system memory (DRAM)
ArmPlatformInitializeSystemMemory ();
}
return RETURN_SUCCESS;
}

104
ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressSecLibRTSM/ArmVExpressSecLib.inf
View File

@@ -1,52 +1,52 @@
#/* @file
# Copyright (c) 2011-2012, ARM Limited. All rights reserved.
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#*/
[Defines]
INF_VERSION = 0x00010005
BASE_NAME = RTSMArmVExpressSecLib
FILE_GUID = 1fdaabb0-ab7d-480c-91ff-428dc1546f3a
MODULE_TYPE = BASE
VERSION_STRING = 1.0
LIBRARY_CLASS = ArmPlatformSecLib
[Packages]
MdePkg/MdePkg.dec
MdeModulePkg/MdeModulePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
ArmPkg/ArmPkg.dec
ArmPlatformPkg/ArmPlatformPkg.dec
[LibraryClasses]
IoLib
ArmLib
SerialPortLib
[Sources.common]
RTSMSec.c
[Sources.ARM]
Arm/RTSMBoot.asm | RVCT
Arm/RTSMBoot.S | GCC
Arm/RTSMHelper.asm | RVCT
Arm/RTSMHelper.S | GCC
[FeaturePcd]
gEmbeddedTokenSpaceGuid.PcdCacheEnable
gArmPlatformTokenSpaceGuid.PcdNorFlashRemapping
gArmPlatformTokenSpaceGuid.PcdStandalone
[FixedPcd]
gArmTokenSpaceGuid.PcdFvBaseAddress
gArmTokenSpaceGuid.PcdArmPrimaryCoreMask
gArmTokenSpaceGuid.PcdArmPrimaryCore
#/* @file
# Copyright (c) 2011-2012, ARM Limited. All rights reserved.
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#*/
[Defines]
INF_VERSION = 0x00010005
BASE_NAME = RTSMArmVExpressSecLib
FILE_GUID = 1fdaabb0-ab7d-480c-91ff-428dc1546f3a
MODULE_TYPE = BASE
VERSION_STRING = 1.0
LIBRARY_CLASS = ArmPlatformSecLib
[Packages]
MdePkg/MdePkg.dec
MdeModulePkg/MdeModulePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
ArmPkg/ArmPkg.dec
ArmPlatformPkg/ArmPlatformPkg.dec
[LibraryClasses]
IoLib
ArmLib
SerialPortLib
[Sources.common]
RTSMSec.c
[Sources.ARM]
Arm/RTSMBoot.asm | RVCT
Arm/RTSMBoot.S | GCC
Arm/RTSMHelper.asm | RVCT
Arm/RTSMHelper.S | GCC
[FeaturePcd]
gEmbeddedTokenSpaceGuid.PcdCacheEnable
gArmPlatformTokenSpaceGuid.PcdNorFlashRemapping
gArmPlatformTokenSpaceGuid.PcdStandalone
[FixedPcd]
gArmTokenSpaceGuid.PcdFvBaseAddress
gArmTokenSpaceGuid.PcdArmPrimaryCoreMask
gArmTokenSpaceGuid.PcdArmPrimaryCore

166
ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressSecLibRTSM/RTSMSec.c
View File

@@ -1,83 +1,83 @@
/** @file
*
* Copyright (c) 2011-2012, ARM Limited. All rights reserved.
*
* This program and the accompanying materials
* are licensed and made available under the terms and conditions of the BSD License
* which accompanies this distribution. The full text of the license may be found at
* http://opensource.org/licenses/bsd-license.php
*
* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
*
**/
#include <Library/IoLib.h>
#include <Library/ArmPlatformLib.h>
#include <Library/DebugLib.h>
#include <Library/PcdLib.h>
#include <Drivers/PL310L2Cache.h>
#include <Drivers/SP804Timer.h>
#include <ArmPlatform.h>
/**
Initialize the Secure peripherals and memory regions
If Trustzone is supported by your platform then this function makes the required initialization
of the secure peripherals and memory regions.
**/
VOID
ArmPlatformSecTrustzoneInit (
IN UINTN MpId
)
{
// No TZPC or TZASC on RTSM to initialize
}
/**
Initialize controllers that must setup at the early stage
Some peripherals must be initialized in Secure World.
For example, some L2x0 requires to be initialized in Secure World
**/
RETURN_STATUS
ArmPlatformSecInitialize (
IN UINTN MpId
)
{
// If it is not the primary core then there is nothing to do
if (!IS_PRIMARY_CORE(MpId)) {
return RETURN_SUCCESS;
}
// Configure periodic timer (TIMER0) for 1MHz operation
MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER0_TIMCLK);
// Configure 1MHz clock
MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER1_TIMCLK);
// Configure SP810 to use 1MHz clock and disable
MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER2_EN, SP810_SYS_CTRL_TIMER2_TIMCLK);
// Configure SP810 to use 1MHz clock and disable
MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER3_EN, SP810_SYS_CTRL_TIMER3_TIMCLK);
return RETURN_SUCCESS;
}
/**
Call before jumping to Normal World
This function allows the firmware platform to do extra actions before
jumping to the Normal World
**/
VOID
ArmPlatformSecExtraAction (
IN UINTN MpId,
OUT UINTN* JumpAddress
)
{
*JumpAddress = PcdGet32(PcdFvBaseAddress);
}
/** @file
*
* Copyright (c) 2011-2012, ARM Limited. All rights reserved.
*
* This program and the accompanying materials
* are licensed and made available under the terms and conditions of the BSD License
* which accompanies this distribution. The full text of the license may be found at
* http://opensource.org/licenses/bsd-license.php
*
* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
*
**/
#include <Library/IoLib.h>
#include <Library/ArmPlatformLib.h>
#include <Library/DebugLib.h>
#include <Library/PcdLib.h>
#include <Drivers/PL310L2Cache.h>
#include <Drivers/SP804Timer.h>
#include <ArmPlatform.h>
/**
Initialize the Secure peripherals and memory regions
If Trustzone is supported by your platform then this function makes the required initialization
of the secure peripherals and memory regions.
**/
VOID
ArmPlatformSecTrustzoneInit (
IN UINTN MpId
)
{
// No TZPC or TZASC on RTSM to initialize
}
/**
Initialize controllers that must setup at the early stage
Some peripherals must be initialized in Secure World.
For example, some L2x0 requires to be initialized in Secure World
**/
RETURN_STATUS
ArmPlatformSecInitialize (
IN UINTN MpId
)
{
// If it is not the primary core then there is nothing to do
if (!IS_PRIMARY_CORE(MpId)) {
return RETURN_SUCCESS;
}
// Configure periodic timer (TIMER0) for 1MHz operation
MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER0_TIMCLK);
// Configure 1MHz clock
MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER1_TIMCLK);
// Configure SP810 to use 1MHz clock and disable
MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER2_EN, SP810_SYS_CTRL_TIMER2_TIMCLK);
// Configure SP810 to use 1MHz clock and disable
MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER3_EN, SP810_SYS_CTRL_TIMER3_TIMCLK);
return RETURN_SUCCESS;
}
/**
Call before jumping to Normal World
This function allows the firmware platform to do extra actions before
jumping to the Normal World
**/
VOID
ArmPlatformSecExtraAction (
IN UINTN MpId,
OUT UINTN* JumpAddress
)
{
*JumpAddress = PcdGet32(PcdFvBaseAddress);
}

70
ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressSysConfigLib/ArmVExpressSysConfigLib.inf
View File

@@ -1,35 +1,35 @@
#/** @file
#
# Component description file for ArmVExpressSysConfigLib module
#
# Copyright (c) 2011-2012, ARM Ltd. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#**/
[Defines]
INF_VERSION = 0x00010005
BASE_NAME = ArmVExpressSysConfigLib
FILE_GUID = a05b5cc0-82d2-11e0-82cb-0002a5d5c51b
MODULE_TYPE = BASE
VERSION_STRING = 1.0
LIBRARY_CLASS = ArmPlatformSysConfigLib
[Sources.common]
ArmVExpressSysConfig.c
[Packages]
MdePkg/MdePkg.dec
ArmPlatformPkg/ArmVExpressPkg/ArmVExpressPkg.dec
ArmPlatformPkg/ArmPlatformPkg.dec
[LibraryClasses]
BaseLib
IoLib
#/** @file
#
# Component description file for ArmVExpressSysConfigLib module
#
# Copyright (c) 2011-2012, ARM Ltd. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#**/
[Defines]
INF_VERSION = 0x00010005
BASE_NAME = ArmVExpressSysConfigLib
FILE_GUID = a05b5cc0-82d2-11e0-82cb-0002a5d5c51b
MODULE_TYPE = BASE
VERSION_STRING = 1.0
LIBRARY_CLASS = ArmPlatformSysConfigLib
[Sources.common]
ArmVExpressSysConfig.c
[Packages]
MdePkg/MdePkg.dec
ArmPlatformPkg/ArmVExpressPkg/ArmVExpressPkg.dec
ArmPlatformPkg/ArmPlatformPkg.dec
[LibraryClasses]
BaseLib
IoLib

2
ArmPlatformPkg/ArmVExpressPkg/Library/HdLcdArmVExpressLib/HdLcdArmVExpressLib.inf
View File

@@ -41,4 +41,4 @@ HdLcdArmVExpress.c
[Pcd]
gArmVExpressTokenSpaceGuid.PcdPL111LcdMaxMode
gArmVExpressTokenSpaceGuid.PcdHdLcdVideoModeOscId
gArmVExpressTokenSpaceGuid.PcdHdLcdVideoModeOscId

64
ArmPlatformPkg/ArmVExpressPkg/Library/NorFlashArmVExpressLib/NorFlashArmVExpressLib.inf
View File

@@ -1,32 +1,32 @@
#/** @file
#
# Copyright (c) 2011, ARM Ltd. All rights reserved.<BR>
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#**/
[Defines]
INF_VERSION = 0x00010005
BASE_NAME = NorFlashArmVExpressLib
FILE_GUID = c0f5dfa0-7599-11e0-9665-0002a5d5c51b
MODULE_TYPE = DXE_DRIVER
VERSION_STRING = 1.0
LIBRARY_CLASS = NorFlashPlatformLib
[Sources.common]
NorFlashArmVExpress.c
[Packages]
MdePkg/MdePkg.dec
ArmPlatformPkg/ArmPlatformPkg.dec
[LibraryClasses]
BaseLib
DebugLib
IoLib
#/** @file
#
# Copyright (c) 2011, ARM Ltd. All rights reserved.<BR>
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#**/
[Defines]
INF_VERSION = 0x00010005
BASE_NAME = NorFlashArmVExpressLib
FILE_GUID = c0f5dfa0-7599-11e0-9665-0002a5d5c51b
MODULE_TYPE = DXE_DRIVER
VERSION_STRING = 1.0
LIBRARY_CLASS = NorFlashPlatformLib
[Sources.common]
NorFlashArmVExpress.c
[Packages]
MdePkg/MdePkg.dec
ArmPlatformPkg/ArmPlatformPkg.dec
[LibraryClasses]
BaseLib
DebugLib
IoLib

86
ArmPlatformPkg/ArmVExpressPkg/Library/PL111LcdArmVExpressLib/PL111LcdArmVExpressLib.inf
View File

@@ -1,43 +1,43 @@
#/** @file
#
# Component description file for ArmVeGraphicsDxe module
#
# Copyright (c) 2011-2012, ARM Ltd. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#**/
[Defines]
INF_VERSION = 0x00010005
BASE_NAME = PL111LcdArmVExpressLib
FILE_GUID = b7f06f20-496f-11e0-a8e8-0002a5d5c51b
MODULE_TYPE = DXE_DRIVER
VERSION_STRING = 1.0
LIBRARY_CLASS = LcdPlatformLib
[Sources.common]
PL111LcdArmVExpress.c
[Packages]
MdePkg/MdePkg.dec
ArmPlatformPkg/ArmVExpressPkg/ArmVExpressPkg.dec
ArmPlatformPkg/ArmPlatformPkg.dec
[LibraryClasses]
BaseLib
ArmPlatformSysConfigLib
[Protocols]
gEfiEdidDiscoveredProtocolGuid # Produced
gEfiEdidActiveProtocolGuid # Produced
[Pcd]
gArmVExpressTokenSpaceGuid.PcdPL111LcdMaxMode
gArmVExpressTokenSpaceGuid.PcdPL111LcdVideoModeOscId
#/** @file
#
# Component description file for ArmVeGraphicsDxe module
#
# Copyright (c) 2011-2012, ARM Ltd. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#**/
[Defines]
INF_VERSION = 0x00010005
BASE_NAME = PL111LcdArmVExpressLib
FILE_GUID = b7f06f20-496f-11e0-a8e8-0002a5d5c51b
MODULE_TYPE = DXE_DRIVER
VERSION_STRING = 1.0
LIBRARY_CLASS = LcdPlatformLib
[Sources.common]
PL111LcdArmVExpress.c
[Packages]
MdePkg/MdePkg.dec
ArmPlatformPkg/ArmVExpressPkg/ArmVExpressPkg.dec
ArmPlatformPkg/ArmPlatformPkg.dec
[LibraryClasses]
BaseLib
ArmPlatformSysConfigLib
[Protocols]
gEfiEdidDiscoveredProtocolGuid # Produced
gEfiEdidActiveProtocolGuid # Produced
[Pcd]
gArmVExpressTokenSpaceGuid.PcdPL111LcdMaxMode
gArmVExpressTokenSpaceGuid.PcdPL111LcdVideoModeOscId

162
ArmPlatformPkg/ArmVExpressPkg/Library/ResetSystemLib/ResetSystemLib.c
View File

@@ -1,81 +1,81 @@
/** @file
Template library implementation to support ResetSystem Runtime call.
Fill in the templates with what ever makes you system reset.
Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <PiDxe.h>
#include <Library/BaseLib.h>
#include <Library/DebugLib.h>
#include <Library/EfiResetSystemLib.h>
#include <Library/ArmPlatformSysConfigLib.h>
#include <ArmPlatform.h>
/**
Resets the entire platform.
@param ResetType The type of reset to perform.
@param ResetStatus The status code for the reset.
@param DataSize The size, in bytes, of WatchdogData.
@param ResetData For a ResetType of EfiResetCold, EfiResetWarm, or
EfiResetShutdown the data buffer starts with a Null-terminated
Unicode string, optionally followed by additional binary data.
**/
EFI_STATUS
EFIAPI
LibResetSystem (
IN EFI_RESET_TYPE ResetType,
IN EFI_STATUS ResetStatus,
IN UINTN DataSize,
IN CHAR16 *ResetData OPTIONAL
)
{
switch (ResetType) {
case EfiResetWarm:
// Map a warm reset into a cold reset
case EfiResetCold:
case EfiResetShutdown:
// Send the REBOOT function to the platform microcontroller
ArmPlatformSysConfigSet (SYS_CFG_REBOOT, 0);
// We should never be here
while(1);
}
ASSERT(FALSE);
return EFI_UNSUPPORTED;
}
/**
Initialize any infrastructure required for LibResetSystem () to function.
@param ImageHandle The firmware allocated handle for the EFI image.
@param SystemTable A pointer to the EFI System Table.
@retval EFI_SUCCESS The constructor always returns EFI_SUCCESS.
**/
EFI_STATUS
EFIAPI
LibInitializeResetSystem (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
return EFI_SUCCESS;
}
/** @file
Template library implementation to support ResetSystem Runtime call.
Fill in the templates with what ever makes you system reset.
Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <PiDxe.h>
#include <Library/BaseLib.h>
#include <Library/DebugLib.h>
#include <Library/EfiResetSystemLib.h>
#include <Library/ArmPlatformSysConfigLib.h>
#include <ArmPlatform.h>
/**
Resets the entire platform.
@param ResetType The type of reset to perform.
@param ResetStatus The status code for the reset.
@param DataSize The size, in bytes, of WatchdogData.
@param ResetData For a ResetType of EfiResetCold, EfiResetWarm, or
EfiResetShutdown the data buffer starts with a Null-terminated
Unicode string, optionally followed by additional binary data.
**/
EFI_STATUS
EFIAPI
LibResetSystem (
IN EFI_RESET_TYPE ResetType,
IN EFI_STATUS ResetStatus,
IN UINTN DataSize,
IN CHAR16 *ResetData OPTIONAL
)
{
switch (ResetType) {
case EfiResetWarm:
// Map a warm reset into a cold reset
case EfiResetCold:
case EfiResetShutdown:
// Send the REBOOT function to the platform microcontroller
ArmPlatformSysConfigSet (SYS_CFG_REBOOT, 0);
// We should never be here
while(1);
}
ASSERT(FALSE);
return EFI_UNSUPPORTED;
}
/**
Initialize any infrastructure required for LibResetSystem () to function.
@param ImageHandle The firmware allocated handle for the EFI image.
@param SystemTable A pointer to the EFI System Table.
@retval EFI_SUCCESS The constructor always returns EFI_SUCCESS.
**/
EFI_STATUS
EFIAPI
LibInitializeResetSystem (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
return EFI_SUCCESS;
}

70
ArmPlatformPkg/ArmVExpressPkg/Library/ResetSystemLib/ResetSystemLib.inf
View File

@@ -1,35 +1,35 @@
#/** @file
# Reset System lib to make it easy to port new platforms
#
# Copyright (c) 2008, Apple Inc. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#
#**/
[Defines]
INF_VERSION = 0x00010005
BASE_NAME = ArmVeResetSystemLib
FILE_GUID = 36885202-0854-4373-bfd2-95d229b44d44
MODULE_TYPE = BASE
VERSION_STRING = 1.0
LIBRARY_CLASS = EfiResetSystemLib
[Sources.common]
ResetSystemLib.c
[Packages]
MdePkg/MdePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
ArmPlatformPkg/ArmPlatformPkg.dec
[LibraryClasses]
DebugLib
BaseLib
ArmPlatformSysConfigLib
#/** @file
# Reset System lib to make it easy to port new platforms
#
# Copyright (c) 2008, Apple Inc. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#
#**/
[Defines]
INF_VERSION = 0x00010005
BASE_NAME = ArmVeResetSystemLib
FILE_GUID = 36885202-0854-4373-bfd2-95d229b44d44
MODULE_TYPE = BASE
VERSION_STRING = 1.0
LIBRARY_CLASS = EfiResetSystemLib
[Sources.common]
ResetSystemLib.c
[Packages]
MdePkg/MdePkg.dec
EmbeddedPkg/EmbeddedPkg.dec
ArmPlatformPkg/ArmPlatformPkg.dec
[LibraryClasses]
DebugLib
BaseLib
ArmPlatformSysConfigLib