MdeModulePkg RamDiskDxe: Install Block I/O 2 Protocol on RAM disk devices

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This commit is contained in:
Hao Wu
2016-02-17 11:25:14 +08:00
parent 20752cb8e7
commit 216fefa3f5
5 changed files with 373 additions and 5 deletions

View File

@@ -27,9 +27,21 @@ EFI_BLOCK_IO_PROTOCOL mRamDiskBlockIoTemplate = {
RamDiskBlkIoFlushBlocks
};
//
// The EFI_BLOCK_IO_PROTOCOL2 instances that is installed onto the handle
// for newly registered RAM disks
//
EFI_BLOCK_IO2_PROTOCOL mRamDiskBlockIo2Template = {
(EFI_BLOCK_IO_MEDIA *) 0,
RamDiskBlkIo2Reset,
RamDiskBlkIo2ReadBlocksEx,
RamDiskBlkIo2WriteBlocksEx,
RamDiskBlkIo2FlushBlocksEx
};
/**
Initialize the BlockIO protocol of a RAM disk device.
Initialize the BlockIO & BlockIO2 protocol of a RAM disk device.
@param[in] PrivateData Points to RAM disk private data.
@@ -40,14 +52,18 @@ RamDiskInitBlockIo (
)
{
EFI_BLOCK_IO_PROTOCOL *BlockIo;
EFI_BLOCK_IO2_PROTOCOL *BlockIo2;
EFI_BLOCK_IO_MEDIA *Media;
BlockIo = &PrivateData->BlockIo;
Media = &PrivateData->Media;
BlockIo = &PrivateData->BlockIo;
BlockIo2 = &PrivateData->BlockIo2;
Media = &PrivateData->Media;
CopyMem (BlockIo, &mRamDiskBlockIoTemplate, sizeof (EFI_BLOCK_IO_PROTOCOL));
CopyMem (BlockIo2, &mRamDiskBlockIo2Template, sizeof (EFI_BLOCK_IO2_PROTOCOL));
BlockIo->Media = Media;
BlockIo2->Media = Media;
Media->RemovableMedia = FALSE;
Media->MediaPresent = TRUE;
Media->LogicalPartition = FALSE;
@@ -256,3 +272,214 @@ RamDiskBlkIoFlushBlocks (
{
return EFI_SUCCESS;
}
/**
Resets the block device hardware.
@param[in] This The pointer of EFI_BLOCK_IO2_PROTOCOL.
@param[in] ExtendedVerification The flag about if extend verificate.
@retval EFI_SUCCESS The device was reset.
@retval EFI_DEVICE_ERROR The block device is not functioning correctly
and could not be reset.
**/
EFI_STATUS
EFIAPI
RamDiskBlkIo2Reset (
IN EFI_BLOCK_IO2_PROTOCOL *This,
IN BOOLEAN ExtendedVerification
)
{
return EFI_SUCCESS;
}
/**
Reads the requested number of blocks from the device.
@param[in] This Indicates a pointer to the calling context.
@param[in] MediaId The media ID that the read request is for.
@param[in] Lba The starting logical block address to read
from on the device.
@param[in, out] Token A pointer to the token associated with the
transaction.
@param[in] BufferSize The size of the Buffer in bytes. This must be
a multiple of the intrinsic block size of the
device.
@param[out] Buffer A pointer to the destination buffer for the
data. The caller is responsible for either
having implicit or explicit ownership of the
buffer.
@retval EFI_SUCCESS The read request was queued if Token->Event
is not NULL. The data was read correctly from
the device if the Token->Event is NULL.
@retval EFI_DEVICE_ERROR The device reported an error while attempting
to perform the read operation.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
@retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of
the intrinsic block size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
valid, or the buffer is not on proper
alignment.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
lack of resources.
**/
EFI_STATUS
EFIAPI
RamDiskBlkIo2ReadBlocksEx (
IN EFI_BLOCK_IO2_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN OUT EFI_BLOCK_IO2_TOKEN *Token,
IN UINTN BufferSize,
OUT VOID *Buffer
)
{
RAM_DISK_PRIVATE_DATA *PrivateData;
EFI_STATUS Status;
PrivateData = RAM_DISK_PRIVATE_FROM_BLKIO2 (This);
Status = RamDiskBlkIoReadBlocks (
&PrivateData->BlockIo,
MediaId,
Lba,
BufferSize,
Buffer
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// If caller's event is given, signal it after the memory read completes.
//
if ((Token != NULL) && (Token->Event != NULL)) {
Token->TransactionStatus = EFI_SUCCESS;
gBS->SignalEvent (Token->Event);
}
return EFI_SUCCESS;
}
/**
Writes a specified number of blocks to the device.
@param[in] This Indicates a pointer to the calling context.
@param[in] MediaId The media ID that the write request is for.
@param[in] Lba The starting logical block address to be
written. The caller is responsible for
writing to only legitimate locations.
@param[in, out] Token A pointer to the token associated with the
transaction.
@param[in] BufferSize The size in bytes of Buffer. This must be a
multiple of the intrinsic block size of the
device.
@param[in] Buffer A pointer to the source buffer for the data.
@retval EFI_SUCCESS The write request was queued if Event is not
NULL. The data was written correctly to the
device if the Event is NULL.
@retval EFI_WRITE_PROTECTED The device cannot be written to.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
@retval EFI_DEVICE_ERROR The device reported an error while attempting
to perform the write operation.
@retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of
the intrinsic block size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not
valid, or the buffer is not on proper
alignment.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
lack of resources.
**/
EFI_STATUS
EFIAPI
RamDiskBlkIo2WriteBlocksEx (
IN EFI_BLOCK_IO2_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN OUT EFI_BLOCK_IO2_TOKEN *Token,
IN UINTN BufferSize,
IN VOID *Buffer
)
{
RAM_DISK_PRIVATE_DATA *PrivateData;
EFI_STATUS Status;
PrivateData = RAM_DISK_PRIVATE_FROM_BLKIO2 (This);
Status = RamDiskBlkIoWriteBlocks (
&PrivateData->BlockIo,
MediaId,
Lba,
BufferSize,
Buffer
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// If caller's event is given, signal it after the memory write completes.
//
if ((Token != NULL) && (Token->Event != NULL)) {
Token->TransactionStatus = EFI_SUCCESS;
gBS->SignalEvent (Token->Event);
}
return EFI_SUCCESS;
}
/**
Flushes all modified data to a physical block device.
@param[in] This Indicates a pointer to the calling context.
@param[in, out] Token A pointer to the token associated with the
transaction.
@retval EFI_SUCCESS The flush request was queued if Event is not
NULL. All outstanding data was written
correctly to the device if the Event is NULL.
@retval EFI_DEVICE_ERROR The device reported an error while attempting
to write data.
@retval EFI_WRITE_PROTECTED The device cannot be written to.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
lack of resources.
**/
EFI_STATUS
EFIAPI
RamDiskBlkIo2FlushBlocksEx (
IN EFI_BLOCK_IO2_PROTOCOL *This,
IN OUT EFI_BLOCK_IO2_TOKEN *Token
)
{
RAM_DISK_PRIVATE_DATA *PrivateData;
PrivateData = RAM_DISK_PRIVATE_FROM_BLKIO2 (This);
if (TRUE == PrivateData->Media.ReadOnly) {
return EFI_WRITE_PROTECTED;
}
//
// If caller's event is given, signal it directly.
//
if ((Token != NULL) && (Token->Event != NULL)) {
Token->TransactionStatus = EFI_SUCCESS;
gBS->SignalEvent (Token->Event);
}
return EFI_SUCCESS;
}