Adding support for BeagleBoard.
ArmPkg - Supoprt for ARM specific things that can change as the architecture changes. Plus semihosting JTAG drivers. EmbeddedPkg - Generic support for an embeddded platform. Including a light weight command line shell. BeagleBoardPkg - Platform specifics for BeagleBoard. SD Card works, but USB has issues. Looks like a bug in the open source USB stack (Our internal stack works fine). git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9518 6f19259b-4bc3-4df7-8a09-765794883524
This commit is contained in:
54
EmbeddedPkg/SerialDxe/SerialDxe.inf
Normal file
54
EmbeddedPkg/SerialDxe/SerialDxe.inf
Normal file
@@ -0,0 +1,54 @@
|
||||
#%HEADER%
|
||||
#/** @file
|
||||
#
|
||||
# Component discription file for Bds module
|
||||
#
|
||||
# Copyright (c) 2008, Intel Corporation. <BR>
|
||||
# All rights reserved. This program and the accompanying materials
|
||||
# are licensed and made available under the terms and conditions of the BSD License
|
||||
# which accompanies this distribution. The full text of the license may be found at
|
||||
# http://opensource.org/licenses/bsd-license.php
|
||||
#
|
||||
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
||||
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
||||
#
|
||||
#**/
|
||||
|
||||
[Defines]
|
||||
INF_VERSION = 0x00010005
|
||||
BASE_NAME = SerialDxe
|
||||
FILE_GUID = D3987D4B-971A-435F-8CAF-4967EB627241
|
||||
MODULE_TYPE = DXE_DRIVER
|
||||
VERSION_STRING = 1.0
|
||||
|
||||
ENTRY_POINT = SerialDxeInitialize
|
||||
|
||||
|
||||
[Sources.common]
|
||||
SerialIo.c
|
||||
|
||||
|
||||
[Packages]
|
||||
MdePkg/MdePkg.dec
|
||||
|
||||
[LibraryClasses]
|
||||
BaseLib
|
||||
ReportStatusCodeLib
|
||||
MemoryAllocationLib
|
||||
UefiLib
|
||||
UefiBootServicesTableLib
|
||||
BaseMemoryLib
|
||||
DebugLib
|
||||
UefiDriverEntryPoint
|
||||
SerialPortLib
|
||||
|
||||
[Guids]
|
||||
|
||||
|
||||
[Protocols]
|
||||
gEfiSerialIoProtocolGuid
|
||||
gEfiDevicePathProtocolGuid
|
||||
|
||||
|
||||
[Depex]
|
||||
TRUE
|
258
EmbeddedPkg/SerialDxe/SerialIo.c
Normal file
258
EmbeddedPkg/SerialDxe/SerialIo.c
Normal file
@@ -0,0 +1,258 @@
|
||||
/** @file
|
||||
Serial IO Abstraction for GDB stub. This allows an EFI consoles that shows up on the system
|
||||
running GDB. One consle for error information and another console for user input/output.
|
||||
|
||||
Basic packet format is $packet-data#checksum. So every comand has 4 bytes of overhead: $,
|
||||
#, 0, 0. The 0 and 0 are the ascii characters for the checksum.
|
||||
|
||||
|
||||
Copyright (c) 2008-2009, Apple Inc. All rights reserved.
|
||||
|
||||
All rights reserved. This program and the accompanying materials
|
||||
are licensed and made available under the terms and conditions of the BSD License
|
||||
which accompanies this distribution. The full text of the license may be found at
|
||||
http://opensource.org/licenses/bsd-license.php
|
||||
|
||||
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
||||
|
||||
**/
|
||||
|
||||
#include <PiDxe.h>
|
||||
#include <Library/UefiLib.h>
|
||||
#include <Library/UefiBootServicesTableLib.h>
|
||||
#include <Library/DebugLib.h>
|
||||
#include <Library/SerialPortLib.h>
|
||||
|
||||
#include <Protocol/SerialIo.h>
|
||||
|
||||
/**
|
||||
Reset the serial device.
|
||||
|
||||
@param This Protocol instance pointer.
|
||||
|
||||
@retval EFI_SUCCESS The device was reset.
|
||||
@retval EFI_DEVICE_ERROR The serial device could not be reset.
|
||||
|
||||
**/
|
||||
EFI_STATUS
|
||||
EFIAPI
|
||||
SerialReset (
|
||||
IN EFI_SERIAL_IO_PROTOCOL *This
|
||||
)
|
||||
{
|
||||
SerialPortInitialize ();
|
||||
return EFI_SUCCESS;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
|
||||
data buts, and stop bits on a serial device.
|
||||
|
||||
@param This Protocol instance pointer.
|
||||
@param BaudRate The requested baud rate. A BaudRate value of 0 will use the the
|
||||
device's default interface speed.
|
||||
@param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the
|
||||
serial interface. A ReceiveFifoDepth value of 0 will use
|
||||
the device's dfault FIFO depth.
|
||||
@param Timeout The requested time out for a single character in microseconds.
|
||||
This timeout applies to both the transmit and receive side of the
|
||||
interface. A Timeout value of 0 will use the device's default time
|
||||
out value.
|
||||
@param Parity The type of parity to use on this serial device. A Parity value of
|
||||
DefaultParity will use the device's default parity value.
|
||||
@param DataBits The number of data bits to use on the serial device. A DataBits
|
||||
vaule of 0 will use the device's default data bit setting.
|
||||
@param StopBits The number of stop bits to use on this serial device. A StopBits
|
||||
value of DefaultStopBits will use the device's default number of
|
||||
stop bits.
|
||||
|
||||
@retval EFI_SUCCESS The device was reset.
|
||||
@retval EFI_DEVICE_ERROR The serial device could not be reset.
|
||||
|
||||
**/
|
||||
EFI_STATUS
|
||||
EFIAPI
|
||||
SerialSetAttributes (
|
||||
IN EFI_SERIAL_IO_PROTOCOL *This,
|
||||
IN UINT64 BaudRate,
|
||||
IN UINT32 ReceiveFifoDepth,
|
||||
IN UINT32 Timeout,
|
||||
IN EFI_PARITY_TYPE Parity,
|
||||
IN UINT8 DataBits,
|
||||
IN EFI_STOP_BITS_TYPE StopBits
|
||||
)
|
||||
{
|
||||
return EFI_UNSUPPORTED;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
Set the control bits on a serial device
|
||||
|
||||
@param This Protocol instance pointer.
|
||||
@param Control Set the bits of Control that are settable.
|
||||
|
||||
@retval EFI_SUCCESS The new control bits were set on the serial device.
|
||||
@retval EFI_UNSUPPORTED The serial device does not support this operation.
|
||||
@retval EFI_DEVICE_ERROR The serial device is not functioning correctly.
|
||||
|
||||
**/
|
||||
EFI_STATUS
|
||||
EFIAPI
|
||||
SerialSetControl (
|
||||
IN EFI_SERIAL_IO_PROTOCOL *This,
|
||||
IN UINT32 Control
|
||||
)
|
||||
{
|
||||
return EFI_UNSUPPORTED;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
Retrieves the status of thecontrol bits on a serial device
|
||||
|
||||
@param This Protocol instance pointer.
|
||||
@param Control A pointer to return the current Control signals from the serial device.
|
||||
|
||||
@retval EFI_SUCCESS The control bits were read from the serial device.
|
||||
@retval EFI_DEVICE_ERROR The serial device is not functioning correctly.
|
||||
|
||||
**/
|
||||
EFI_STATUS
|
||||
EFIAPI
|
||||
SerialGetControl (
|
||||
IN EFI_SERIAL_IO_PROTOCOL *This,
|
||||
OUT UINT32 *Control
|
||||
)
|
||||
{
|
||||
if (SerialPortPoll ()) {
|
||||
// If a character is pending don't set EFI_SERIAL_INPUT_BUFFER_EMPTY
|
||||
*Control = EFI_SERIAL_OUTPUT_BUFFER_EMPTY;
|
||||
} else {
|
||||
*Control = EFI_SERIAL_INPUT_BUFFER_EMPTY | EFI_SERIAL_OUTPUT_BUFFER_EMPTY;
|
||||
}
|
||||
return EFI_SUCCESS;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
Writes data to a serial device.
|
||||
|
||||
@param This Protocol instance pointer.
|
||||
@param BufferSize On input, the size of the Buffer. On output, the amount of
|
||||
data actually written.
|
||||
@param Buffer The buffer of data to write
|
||||
|
||||
@retval EFI_SUCCESS The data was written.
|
||||
@retval EFI_DEVICE_ERROR The device reported an error.
|
||||
@retval EFI_TIMEOUT The data write was stopped due to a timeout.
|
||||
|
||||
**/
|
||||
EFI_STATUS
|
||||
EFIAPI
|
||||
SerialWrite (
|
||||
IN EFI_SERIAL_IO_PROTOCOL *This,
|
||||
IN OUT UINTN *BufferSize,
|
||||
IN VOID *Buffer
|
||||
)
|
||||
{
|
||||
UINTN Count;
|
||||
|
||||
Count = SerialPortWrite (Buffer, *BufferSize);
|
||||
*BufferSize = Count;
|
||||
return (Count == 0) ? EFI_DEVICE_ERROR : EFI_SUCCESS;
|
||||
}
|
||||
|
||||
/**
|
||||
Writes data to a serial device.
|
||||
|
||||
@param This Protocol instance pointer.
|
||||
@param BufferSize On input, the size of the Buffer. On output, the amount of
|
||||
data returned in Buffer.
|
||||
@param Buffer The buffer to return the data into.
|
||||
|
||||
@retval EFI_SUCCESS The data was read.
|
||||
@retval EFI_DEVICE_ERROR The device reported an error.
|
||||
@retval EFI_TIMEOUT The data write was stopped due to a timeout.
|
||||
|
||||
**/
|
||||
|
||||
EFI_STATUS
|
||||
EFIAPI
|
||||
SerialRead (
|
||||
IN EFI_SERIAL_IO_PROTOCOL *This,
|
||||
IN OUT UINTN *BufferSize,
|
||||
OUT VOID *Buffer
|
||||
)
|
||||
{
|
||||
UINTN Count;
|
||||
|
||||
Count = SerialPortWrite (Buffer, *BufferSize);
|
||||
*BufferSize = Count;
|
||||
return (Count == 0) ? EFI_DEVICE_ERROR : EFI_SUCCESS;
|
||||
}
|
||||
|
||||
|
||||
EFI_HANDLE gHandle = NULL;
|
||||
|
||||
//
|
||||
// Template used to initailize the GDB Serial IO protocols
|
||||
//
|
||||
EFI_SERIAL_IO_MODE gSerialIoMode = {
|
||||
0, // ControlMask
|
||||
0, // Timeout
|
||||
0, // BaudRate
|
||||
1, // RceiveFifoDepth
|
||||
0, // DataBits
|
||||
0, // Parity
|
||||
0 // StopBits
|
||||
};
|
||||
|
||||
|
||||
EFI_SERIAL_IO_PROTOCOL gSerialIoTemplate = {
|
||||
SERIAL_IO_INTERFACE_REVISION,
|
||||
SerialReset,
|
||||
SerialSetAttributes,
|
||||
SerialSetControl,
|
||||
SerialGetControl,
|
||||
SerialWrite,
|
||||
SerialRead,
|
||||
&gSerialIoMode
|
||||
};
|
||||
|
||||
|
||||
/**
|
||||
Initialize the state information for the Serial Io Protocol
|
||||
|
||||
@param ImageHandle of the loaded driver
|
||||
@param SystemTable Pointer to the System Table
|
||||
|
||||
@retval EFI_SUCCESS Protocol registered
|
||||
@retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure
|
||||
@retval EFI_DEVICE_ERROR Hardware problems
|
||||
|
||||
**/
|
||||
EFI_STATUS
|
||||
EFIAPI
|
||||
SerialDxeInitialize (
|
||||
IN EFI_HANDLE ImageHandle,
|
||||
IN EFI_SYSTEM_TABLE *SystemTable
|
||||
)
|
||||
{
|
||||
EFI_STATUS Status;
|
||||
|
||||
|
||||
// Make a new handle with Serial IO protocol and its device path on it.
|
||||
Status = gBS->InstallMultipleProtocolInterfaces (
|
||||
&gHandle,
|
||||
&gEfiSerialIoProtocolGuid, &gSerialIoTemplate,
|
||||
&gEfiDevicePathProtocolGuid, NULL, // BugBug: Need a device path
|
||||
NULL
|
||||
);
|
||||
ASSERT_EFI_ERROR (Status);
|
||||
|
||||
return Status;
|
||||
}
|
||||
|
Reference in New Issue
Block a user