Upload BSD-licensed Vlv2TbltDevicePkg and Vlv2DeviceRefCodePkg to
https://svn.code.sf.net/p/edk2/code/trunk/edk2/, which are for MinnowBoard MAX open source project. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: David Wei <david.wei@intel.com> Reviewed-by: Mike Wu <mike.wu@intel.com> Reviewed-by: Hot Tian <hot.tian@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16599 6f19259b-4bc3-4df7-8a09-765794883524
This commit is contained in:
David Wei
zwei4
177
Vlv2DeviceRefCodePkg/AcpiTablesPCAT/IoTVirtualDevice.asl
Normal file
177
Vlv2DeviceRefCodePkg/AcpiTablesPCAT/IoTVirtualDevice.asl
Normal file
@@ -0,0 +1,177 @@
|
||||
/** @file
|
||||
Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
|
||||
This program and the accompanying materials
|
||||
are licensed and made available under the terms and conditions of the BSD License
|
||||
which accompanies this distribution. The full text of the license may be found at
|
||||
http://opensource.org/licenses/bsd-license.php
|
||||
|
||||
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
||||
|
||||
**/
|
||||
|
||||
Device(IOTD) {
|
||||
Name(_HID, "MSFT8000")
|
||||
Name(_CID, "MSFT8000")
|
||||
|
||||
Name(_CRS, ResourceTemplate() {
|
||||
// Index 0
|
||||
SPISerialBus( // Pin 5, 7, 9 , 11 of JP1 for SIO_SPI
|
||||
1, // Device selection
|
||||
PolarityLow, // Device selection polarity
|
||||
FourWireMode, // wiremode
|
||||
8, // databit len
|
||||
ControllerInitiated, // slave mode
|
||||
8000000, // Connection speed
|
||||
ClockPolarityLow, // Clock polarity
|
||||
ClockPhaseSecond, // clock phase
|
||||
"\\_SB.SPI1", // ResourceSource: SPI bus controller name
|
||||
0, // ResourceSourceIndex
|
||||
ResourceConsumer, // Resource usage
|
||||
JSPI, // DescriptorName: creates name for offset of resource descriptor
|
||||
) // Vendor Data
|
||||
|
||||
// Index 1
|
||||
I2CSerialBus( // Pin 13, 15 of JP1, for SIO_I2C5 (signal)
|
||||
0x00, // SlaveAddress: bus address (TBD)
|
||||
, // SlaveMode: default to ControllerInitiated
|
||||
400000, // ConnectionSpeed: in Hz
|
||||
, // Addressing Mode: default to 7 bit
|
||||
"\\_SB.I2C6", // ResourceSource: I2C bus controller name (For MinnowBoard Max, hardware I2C5(0-based) is reported as ACPI I2C6(1-based))
|
||||
,
|
||||
,
|
||||
JI2C, // Descriptor Name: creates name for offset of resource descriptor
|
||||
) // VendorData
|
||||
|
||||
// Index 2
|
||||
UARTSerialBus( // Pin 17, 19 of JP1, for SIO_UART2
|
||||
115200, // InitialBaudRate: in bits ber second
|
||||
, // BitsPerByte: default to 8 bits
|
||||
, // StopBits: Defaults to one bit
|
||||
0xfc, // LinesInUse: 8 1-bit flags to declare line enabled
|
||||
, // IsBigEndian: default to LittleEndian
|
||||
, // Parity: Defaults to no parity
|
||||
, // FlowControl: Defaults to no flow control
|
||||
32, // ReceiveBufferSize
|
||||
32, // TransmitBufferSize
|
||||
"\\_SB.URT2", // ResourceSource: UART bus controller name
|
||||
,
|
||||
,
|
||||
UAR2, // DescriptorName: creates name for offset of resource descriptor
|
||||
)
|
||||
|
||||
// Index 3
|
||||
GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO2",) {0} // Pin 21 of JP1 (GPIO_S5[00])
|
||||
// Index 4
|
||||
GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO2",) {0}
|
||||
|
||||
// Index 5
|
||||
GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO2",) {1} // Pin 23 of JP1 (GPIO_S5[01])
|
||||
// Index 6
|
||||
GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO2",) {1}
|
||||
|
||||
// Index 7
|
||||
GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO2",) {2} // Pin 25 of JP1 (GPIO_S5[02])
|
||||
// Index 8
|
||||
GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO2",) {2}
|
||||
|
||||
// Index 9
|
||||
UARTSerialBus( // Pin 6, 8, 10, 12 of JP1, for SIO_UART1
|
||||
115200, // InitialBaudRate: in bits ber second
|
||||
, // BitsPerByte: default to 8 bits
|
||||
, // StopBits: Defaults to one bit
|
||||
0xfc, // LinesInUse: 8 1-bit flags to declare line enabled
|
||||
, // IsBigEndian: default to LittleEndian
|
||||
, // Parity: Defaults to no parity
|
||||
FlowControlHardware, // FlowControl: Defaults to no flow control
|
||||
32, // ReceiveBufferSize
|
||||
32, // TransmitBufferSize
|
||||
"\\_SB.URT1", // ResourceSource: UART bus controller name
|
||||
,
|
||||
,
|
||||
UAR1, // DescriptorName: creates name for offset of resource descriptor
|
||||
)
|
||||
|
||||
// Index 10
|
||||
GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {62} // Pin 14 of JP1 (GPIO_SC[62])
|
||||
// Index 11
|
||||
GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {62}
|
||||
|
||||
// Index 12
|
||||
GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {63} // Pin 16 of JP1 (GPIO_SC[63])
|
||||
// Index 13
|
||||
GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {63}
|
||||
|
||||
// Index 14
|
||||
GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {65} // Pin 18 of JP1 (GPIO_SC[65])
|
||||
// Index 15
|
||||
GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {65}
|
||||
|
||||
// Index 16
|
||||
GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {64} // Pin 20 of JP1 (GPIO_SC[64])
|
||||
// Index 17
|
||||
GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {64}
|
||||
|
||||
// Index 18
|
||||
GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {94} // Pin 22 of JP1 (GPIO_SC[94])
|
||||
// Index 19
|
||||
GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {94}
|
||||
|
||||
// Index 20
|
||||
GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {95} // Pin 24 of JP1 (GPIO_SC[95])
|
||||
// Index 21
|
||||
GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {95}
|
||||
|
||||
// Index 22
|
||||
GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {54} // Pin 26 of JP1 (GPIO_SC[54])
|
||||
// Index 23
|
||||
GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {54}
|
||||
})
|
||||
|
||||
Name(_DSD, Package() {
|
||||
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
|
||||
Package(1) { // Just one Property for IOT (at this time)
|
||||
Package(2) { //The <20>symbolic-identifiers<72> property
|
||||
"symbolic-identifiers",
|
||||
Package() { //Contains all the <resource index, symbolic-identifier> pairs
|
||||
0, "SPI0",
|
||||
1, "I2C5",
|
||||
2, "UART2",
|
||||
3, 21, // Pin 21 of JP1 (GPIO_S5[00])
|
||||
4, 21, // Pin 21 for separate resource.
|
||||
5, 23, // Pin 23 of JP1 (GPIO_S5[01])
|
||||
6, 23,
|
||||
7, 25, // Pin 25 of JP1 (GPIO_S5[02])
|
||||
8, 25,
|
||||
9, "UART1",
|
||||
10, 14, // Pin 14 of JP1 (GPIO_SC[62])
|
||||
11, 14,
|
||||
12, 16, // Pin 16 of JP1 (GPIO_SC[63])
|
||||
13, 16,
|
||||
14, 18, // Pin 18 of JP1 (GPIO_SC[65])
|
||||
15, 18,
|
||||
16, 20, // Pin 20 of JP1 (GPIO_SC[64])
|
||||
17, 20,
|
||||
18, 22, // Pin 22 of JP1 (GPIO_SC[94])
|
||||
19, 22,
|
||||
20, 24, // Pin 24 of JP1 (GPIO_SC[95])
|
||||
21, 24,
|
||||
22, 26, // Pin 26 of JP1 (GPIO_SC[54])
|
||||
23, 26
|
||||
}
|
||||
}
|
||||
}
|
||||
})
|
||||
|
||||
Method(_STA,0,Serialized) {
|
||||
|
||||
//
|
||||
// Only report IoT virtual device when all pins' configuration follows MSFT's datasheet.
|
||||
//
|
||||
If (LEqual(IOT, 1)) {
|
||||
Return (0xF)
|
||||
}
|
||||
|
||||
Return (0x0)
|
||||
}
|
||||
}
|
||||
Reference in New Issue
Block a user