Upload BSD-licensed Vlv2TbltDevicePkg and Vlv2DeviceRefCodePkg to

https://svn.code.sf.net/p/edk2/code/trunk/edk2/, 

which are for MinnowBoard MAX open source project.


Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Wei <david.wei@intel.com>
Reviewed-by: Mike Wu <mike.wu@intel.com>
Reviewed-by: Hot Tian <hot.tian@intel.com>


git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16599 6f19259b-4bc3-4df7-8a09-765794883524

Vlv2DeviceRefCodePkg/AcpiTablesPCAT/RTD3.asl

@@ -0,0 +1,203 @@
+/**************************************************************************;
+;*                                                                        *;
+;*                                                                        *;
+;*    Intel Corporation - ACPI Reference Code for the Baytrail            *;
+;*    Family of Customer Reference Boards.                                *;
+;*                                                                        *;
+;*                                                                        *;
+;*    Copyright (c) 2012  - 2014, Intel Corporation. All rights reserved    *;
+;
+; This program and the accompanying materials are licensed and made available under
+; the terms and conditions of the BSD License that accompanies this distribution.
+; The full text of the license may be found at
+; http://opensource.org/licenses/bsd-license.php.
+;
+; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+;
+;*                                                                        *;
+;*                                                                        *;
+;**************************************************************************/
+DefinitionBlock (
+  "Rtd3.aml",
+  "SSDT",
+  1,
+  "AcpiRef",
+  "Msg_Rtd3",
+  0x1000
+)
+{
+  External(RTD3)             //flag if RTD3 is enabled
+
+  If(LEqual(RTD3,1))
+  {
+    Scope (\_SB)
+    {
+      Name(OSCI, 0)  // \_SB._OSC DWORD2 input
+      Name(OSCO, 0)  // \_SB._OSC DWORD2 output
+
+      //Arg0 -- A buffer containing UUID
+      //Arg1 -- An Interger containing a Revision ID of the buffer format
+      //Arg2 -- An interger containing a count of entries in Arg3
+      //Arg3 -- A buffer containing a list of DWORD capacities
+      Method(_OSC, 4, NotSerialized)
+      {
+        // Check for proper UUID
+        If(LEqual(Arg0, ToUUID("0811B06E-4A27-44F9-8D60-3CBBC22E7B48")))
+        {
+          CreateDWordField(Arg3,0,CDW1)     //bit1,2 is always clear
+          CreateDWordField(Arg3,4,CDW2)     //Table 6-147 from ACPI spec
+
+          Store(CDW2, OSCI)                 // Save DWord2
+          Or(OSCI, 0x4, OSCO)               // Only allow _PR3 support
+
+          If(LNotEqual(Arg1,One))
+          {
+            Or(CDW1,0x08,CDW1)            // Unknown revision
+          }
+
+          If(LNotEqual(OSCI, OSCO))
+          {
+            Or(CDW1,0x10,CDW1)            // Capabilities bits were masked
+          }
+
+          Store(OSCO, CDW2)                 // Replace DWord2
+          Return(Arg3)
+        } Else
+        {
+          Or(CDW1,4,CDW1)                   // Unrecognized UUID
+          Return(Arg3)
+        }
+      }// End _OSC
+    }
+  }//end of RTD3 condition
+
+
+  //USB RTD3 code
+  If(LEqual(RTD3,1))
+  {
+    Scope(\_SB.PCI0.EHC1.HUBN.PR01.PR13)
+    {
+      Name(_PR0, Package() {\PR34})
+      Name(_PR3, Package() {\PR34})
+
+      Method(_S0W, 0)
+      {
+        If(And(\_SB.OSCO, 0x04))              // PMEs can be genrated from D3cold
+        {
+          Return(4)                         // OS comprehends D3cold, as described via \_SB._OSC
+        } Else
+        {
+          Return(3)
+        }
+      } // End _S0W
+    }
+
+    Scope(\_SB.PCI0.EHC1.HUBN.PR01.PR14)
+    {
+      Name(_PR0, Package() {\PR34})
+      Name(_PR3, Package() {\PR34})
+
+      Method(_S0W, 0)
+      {
+        If(And(\_SB.OSCO, 0x04))
+        {
+          Return(4)
+        } Else
+        {
+          Return(3)
+        }
+      } // End _S0W
+    }
+
+
+    Scope(\_SB.PCI0.EHC1.HUBN.PR01.PR15)
+    {
+      Name(_PR0, Package() {\PR56})
+      Name(_PR3, Package() {\PR56})
+
+      Method(_S0W, 0)
+      {
+        If(And(\_SB.OSCO, 0x04))
+        {
+          Return(4)
+        } Else
+        {
+          Return(3)
+        }
+      } // End _S0W
+    }
+
+    Scope(\_SB.PCI0.EHC1.HUBN.PR01.PR16)
+    {
+      Name(_PR0, Package() {\PR56})
+      Name(_PR3, Package() {\PR56})
+
+      Method(_S0W, 0)
+      {
+        If(And(\_SB.OSCO, 0x04))
+        {
+          Return(4)
+        } Else
+        {
+          Return(3)
+        }
+      } // End _S0W
+    }
+
+    Scope(\_SB.PCI0.XHC1)                              // XHCI host only controller
+    {
+
+      Method(_PS0,0,Serialized)                      // set device into D0 state
+      {
+      }
+
+      Method(_PS3,0,Serialized)                      // place device into D3H state
+      {
+        //write to PMCSR
+      }
+
+      Method(_DSW, 3,Serialized)                     // enable or disable the device’s ability to wake a sleeping system.
+      {
+      }
+    }
+
+    Scope(\_SB.PCI0.XHC1.RHUB.HS01)
+    {
+
+    }
+
+    Scope(\_SB.PCI0.XHC1.RHUB.SSP1)
+    {
+
+    }
+
+    Scope(\_SB.PCI0.XHC2)                              // OTG
+    {
+
+      Method(_PS0,0,Serialized)                      // set device into D0 state
+      {
+      }
+
+      Method(_PS3,0,Serialized)                      // place device into D3H state
+      {
+        //write to PMCSR
+      }
+
+      Method(_DSW, 3,Serialized)                      // enable or disable the device’s ability to wake a sleeping system.
+      {
+      }
+    }
+
+    Scope(\_SB.PCI0.XHC2.RHUB.HS01)
+    {
+
+    }
+
+    Scope(\_SB.PCI0.XHC2.RHUB.SSP1)
+    {
+
+    }
+  } //If(LEqual(RTD3,1)) USB
+
+}//end of SSDT