Upload BSD-licensed Vlv2TbltDevicePkg and Vlv2DeviceRefCodePkg to

https://svn.code.sf.net/p/edk2/code/trunk/edk2/, 

which are for MinnowBoard MAX open source project.


Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Wei <david.wei@intel.com>
Reviewed-by: Mike Wu <mike.wu@intel.com>
Reviewed-by: Hot Tian <hot.tian@intel.com>


git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16599 6f19259b-4bc3-4df7-8a09-765794883524
This commit is contained in:
David Wei
2015-01-12 09:37:20 +00:00
committed by zwei4
parent 6f785cfcc3
commit 3cbfba02fe
518 changed files with 118538 additions and 0 deletions

View File

@@ -0,0 +1,51 @@
;------------------------------------------------------------------------------
;
; Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
; This program and the accompanying materials
; are licensed and made available under the terms and conditions of the BSD License
; which accompanies this distribution. The full text of the license may be found at
; http://opensource.org/licenses/bsd-license.php.
;
; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
;
; Module Name:
;
; SecEntry.asm
;
; Abstract:
;
; This is the code that goes from real-mode to protected mode.
; It consumes the reset vector, calls two basic APIs from FSP binary.
;
;------------------------------------------------------------------------------
.686p
.xmm
.model flat,c
.code
;----------------------------------------------------------------------------
; MMX Usage:
; MM0 = BIST State
; MM5 = Save time-stamp counter value high32bit
; MM6 = Save time-stamp counter value low32bit.
;
; It should be same as SecEntry.asm and PeiCoreEntry.asm.
;----------------------------------------------------------------------------
AsmSaveBistValue PROC PUBLIC
mov eax, [esp+4]
movd mm0, eax
ret
AsmSaveBistValue ENDP
AsmSaveTickerValue PROC PUBLIC
mov eax, [esp+4]
movd mm6, eax
mov eax, [esp+8]
movd mm5, eax
ret
AsmSaveTickerValue ENDP
END

View File

@@ -0,0 +1,51 @@
;------------------------------------------------------------------------------
;
; Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
; This program and the accompanying materials
; are licensed and made available under the terms and conditions of the BSD License
; which accompanies this distribution. The full text of the license may be found at
; http://opensource.org/licenses/bsd-license.php.
;
; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
;
; Module Name:
;
; Fsp.inc
;
; Abstract:
;
; Fsp related definitions
;
;------------------------------------------------------------------------------
;
; Fv Header
;
FVH_SIGINATURE_OFFSET EQU 028h
FVH_SIGINATURE_VALID_VALUE EQU 04856465Fh ; valid signature:_FVH
FVH_HEADER_LENGTH_OFFSET EQU 030h
FVH_EXTHEADER_OFFSET_OFFSET EQU 034h
FVH_EXTHEADER_SIZE_OFFSET EQU 010h
;
; Ffs Header
;
FSP_HEADER_GUID_DWORD1 EQU 0912740BEh
FSP_HEADER_GUID_DWORD2 EQU 047342284h
FSP_HEADER_GUID_DWORD3 EQU 0B08471B9h
FSP_HEADER_GUID_DWORD4 EQU 00C3F3527h
FFS_HEADER_SIZE_VALUE EQU 018h
;
; Section Header
;
SECTION_HEADER_TYPE_OFFSET EQU 03h
RAW_SECTION_HEADER_SIZE_VALUE EQU 04h
;
; Fsp Header
;
FSP_HEADER_IMAGEBASE_OFFSET EQU 01Ch
FSP_HEADER_TEMPRAMINIT_OFFSET EQU 030h

View File

@@ -0,0 +1,141 @@
;------------------------------------------------------------------------------
;
; Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
; This program and the accompanying materials
; are licensed and made available under the terms and conditions of the BSD License
; which accompanies this distribution. The full text of the license may be found at
; http://opensource.org/licenses/bsd-license.php.
;
; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
;
; Module Name:
;
; SecEntry.asm
;
; Abstract:
;
; This is the code that goes from real-mode to protected mode.
; It consumes the reset vector, calls two basic APIs from FSP binary.
;
;------------------------------------------------------------------------------
.686p
.xmm
.model flat, c
.code
EXTRN SecStartup:NEAR
EXTRN PlatformInit:NEAR
CallPeiCoreEntryPoint PROC PUBLIC
;
; Obtain the hob list pointer
;
mov eax, [esp+4]
;
; Obtain the stack information
; ECX: start of range
; EDX: end of range
;
mov ecx, [esp+8]
mov edx, [esp+0Ch]
;
; Platform init
;
pushad
push edx
push ecx
push eax
call PlatformInit
pop eax
pop eax
pop eax
popad
;
; Set stack top pointer
;
mov esp, edx
;
; Push the hob list pointer
;
push eax
;
; Save the value
; ECX: start of range
; EDX: end of range
;
mov ebp, esp
push ecx
push edx
;
; Push processor count to stack first, then BIST status (AP then BSP)
;
mov eax, 1
cpuid
shr ebx, 16
and ebx, 0000000FFh
cmp bl, 1
jae PushProcessorCount
;
; Some processors report 0 logical processors. Effectively 0 = 1.
; So we fix up the processor count
;
inc ebx
PushProcessorCount:
push ebx
;
; We need to implement a long-term solution for BIST capture. For now, we just copy BSP BIST
; for all processor threads
;
xor ecx, ecx
mov cl, bl
PushBist:
movd eax, mm0
push eax
loop PushBist
; Save Time-Stamp Counter
movd eax, mm5
push eax
movd eax, mm6
push eax
;
; Pass entry point of the PEI core
;
mov edi, 0FFFFFFE0h
push DWORD PTR ds:[edi]
;
; Pass BFV into the PEI Core
;
mov edi, 0FFFFFFFCh
push DWORD PTR ds:[edi]
;
; Pass stack size into the PEI Core
;
mov ecx, [ebp - 4]
mov edx, [ebp - 8]
push ecx ; RamBase
sub edx, ecx
push edx ; RamSize
;
; Pass Control into the PEI Core
;
call SecStartup
CallPeiCoreEntryPoint ENDP
END

View File

@@ -0,0 +1,344 @@
;------------------------------------------------------------------------------
;
; Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
; This program and the accompanying materials
; are licensed and made available under the terms and conditions of the BSD License
; which accompanies this distribution. The full text of the license may be found at
; http://opensource.org/licenses/bsd-license.php.
;
; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
;
; Module Name:
;
; SecEntry.asm
;
; Abstract:
;
; This is the code that goes from real-mode to protected mode.
; It consumes the reset vector, calls two basic APIs from FSP binary.
;
;------------------------------------------------------------------------------
INCLUDE Fsp.inc
.686p
.xmm
.model small, c
EXTRN CallPeiCoreEntryPoint:NEAR
EXTRN TempRamInitParams:FAR
; Pcds
EXTRN PcdGet32 (PcdFlashFvFspBase):DWORD
EXTRN PcdGet32 (PcdFlashFvFspSize):DWORD
_TEXT_REALMODE SEGMENT PARA PUBLIC USE16 'CODE'
ASSUME CS:_TEXT_REALMODE, DS:_TEXT_REALMODE
;----------------------------------------------------------------------------
;
; Procedure: _ModuleEntryPoint
;
; Input: None
;
; Output: None
;
; Destroys: Assume all registers
;
; Description:
;
; Transition to non-paged flat-model protected mode from a
; hard-coded GDT that provides exactly two descriptors.
; This is a bare bones transition to protected mode only
; used for a while in PEI and possibly DXE.
;
; After enabling protected mode, a far jump is executed to
; transfer to PEI using the newly loaded GDT.
;
; Return: None
;
; MMX Usage:
; MM0 = BIST State
; MM5 = Save time-stamp counter value high32bit
; MM6 = Save time-stamp counter value low32bit.
;
;----------------------------------------------------------------------------
align 4
_ModuleEntryPoint PROC NEAR C PUBLIC
fninit ; clear any pending Floating point exceptions
;
; Store the BIST value in mm0
;
movd mm0, eax
;
; Save time-stamp counter value
; rdtsc load 64bit time-stamp counter to EDX:EAX
;
rdtsc
movd mm5, edx
movd mm6, eax
;
; Load the GDT table in GdtDesc
;
mov esi, OFFSET GdtDesc
DB 66h
lgdt fword ptr cs:[si]
;
; Transition to 16 bit protected mode
;
mov eax, cr0 ; Get control register 0
or eax, 00000003h ; Set PE bit (bit #0) & MP bit (bit #1)
mov cr0, eax ; Activate protected mode
mov eax, cr4 ; Get control register 4
or eax, 00000600h ; Set OSFXSR bit (bit #9) & OSXMMEXCPT bit (bit #10)
mov cr4, eax
;
; Now we're in 16 bit protected mode
; Set up the selectors for 32 bit protected mode entry
;
mov ax, SYS_DATA_SEL
mov ds, ax
mov es, ax
mov fs, ax
mov gs, ax
mov ss, ax
;
; Transition to Flat 32 bit protected mode
; The jump to a far pointer causes the transition to 32 bit mode
;
mov esi, offset ProtectedModeEntryLinearAddress
jmp fword ptr cs:[si]
_ModuleEntryPoint ENDP
_TEXT_REALMODE ENDS
_TEXT_PROTECTED_MODE SEGMENT PARA PUBLIC USE32 'CODE'
ASSUME CS:_TEXT_PROTECTED_MODE, DS:_TEXT_PROTECTED_MODE
;----------------------------------------------------------------------------
;
; Procedure: ProtectedModeEntryPoint
;
; Input: None
;
; Output: None
;
; Destroys: Assume all registers
;
; Description:
;
; This function handles:
; Call two basic APIs from FSP binary
; Initializes stack with some early data (BIST, PEI entry, etc)
;
; Return: None
;
;----------------------------------------------------------------------------
align 4
ProtectedModeEntryPoint PROC NEAR PUBLIC
; Find the fsp info header
mov edi, PcdGet32 (PcdFlashFvFspBase)
mov ecx, PcdGet32 (PcdFlashFvFspSize)
mov eax, dword ptr [edi + FVH_SIGINATURE_OFFSET]
cmp eax, FVH_SIGINATURE_VALID_VALUE
jnz FspHeaderNotFound
xor eax, eax
mov ax, word ptr [edi + FVH_EXTHEADER_OFFSET_OFFSET]
cmp ax, 0
jnz FspFvExtHeaderExist
xor eax, eax
mov ax, word ptr [edi + FVH_HEADER_LENGTH_OFFSET] ; Bypass Fv Header
add edi, eax
jmp FspCheckFfsHeader
FspFvExtHeaderExist:
add edi, eax
mov eax, dword ptr [edi + FVH_EXTHEADER_SIZE_OFFSET] ; Bypass Ext Fv Header
add edi, eax
; Round up to 8 byte alignment
mov eax, edi
and al, 07h
jz FspCheckFfsHeader
and edi, 0FFFFFFF8h
add edi, 08h
FspCheckFfsHeader:
; Check the ffs guid
mov eax, dword ptr [edi]
cmp eax, FSP_HEADER_GUID_DWORD1
jnz FspHeaderNotFound
mov eax, dword ptr [edi + 4]
cmp eax, FSP_HEADER_GUID_DWORD2
jnz FspHeaderNotFound
mov eax, dword ptr [edi + 8]
cmp eax, FSP_HEADER_GUID_DWORD3
jnz FspHeaderNotFound
mov eax, dword ptr [edi + 0Ch]
cmp eax, FSP_HEADER_GUID_DWORD4
jnz FspHeaderNotFound
add edi, FFS_HEADER_SIZE_VALUE ; Bypass the ffs header
; Check the section type as raw section
mov al, byte ptr [edi + SECTION_HEADER_TYPE_OFFSET]
cmp al, 019h
jnz FspHeaderNotFound
add edi, RAW_SECTION_HEADER_SIZE_VALUE ; Bypass the section header
jmp FspHeaderFound
FspHeaderNotFound:
jmp $
FspHeaderFound:
; Get the fsp TempRamInit Api address
mov eax, dword ptr [edi + FSP_HEADER_IMAGEBASE_OFFSET]
add eax, dword ptr [edi + FSP_HEADER_TEMPRAMINIT_OFFSET]
; Setup the hardcode stack
mov esp, OFFSET TempRamInitStack
; Call the fsp TempRamInit Api
jmp eax
TempRamInitDone:
cmp eax, 0
jnz FspApiFailed
; ECX: start of range
; EDX: end of range
mov esp, edx
push edx
push ecx
push eax ; zero - no hob list yet
call CallPeiCoreEntryPoint
FspApiFailed:
jmp $
align 10h
TempRamInitStack:
DD OFFSET TempRamInitDone
DD OFFSET TempRamInitParams
ProtectedModeEntryPoint ENDP
;
; ROM-based Global-Descriptor Table for the Tiano PEI Phase
;
align 16
PUBLIC BootGdtTable
;
; GDT[0]: 0x00: Null entry, never used.
;
NULL_SEL EQU $ - GDT_BASE ; Selector [0]
GDT_BASE:
BootGdtTable DD 0
DD 0
;
; Linear data segment descriptor
;
LINEAR_SEL EQU $ - GDT_BASE ; Selector [0x8]
DW 0FFFFh ; limit 0xFFFFF
DW 0 ; base 0
DB 0
DB 092h ; present, ring 0, data, expand-up, writable
DB 0CFh ; page-granular, 32-bit
DB 0
;
; Linear code segment descriptor
;
LINEAR_CODE_SEL EQU $ - GDT_BASE ; Selector [0x10]
DW 0FFFFh ; limit 0xFFFFF
DW 0 ; base 0
DB 0
DB 09Bh ; present, ring 0, data, expand-up, not-writable
DB 0CFh ; page-granular, 32-bit
DB 0
;
; System data segment descriptor
;
SYS_DATA_SEL EQU $ - GDT_BASE ; Selector [0x18]
DW 0FFFFh ; limit 0xFFFFF
DW 0 ; base 0
DB 0
DB 093h ; present, ring 0, data, expand-up, not-writable
DB 0CFh ; page-granular, 32-bit
DB 0
;
; System code segment descriptor
;
SYS_CODE_SEL EQU $ - GDT_BASE ; Selector [0x20]
DW 0FFFFh ; limit 0xFFFFF
DW 0 ; base 0
DB 0
DB 09Ah ; present, ring 0, data, expand-up, writable
DB 0CFh ; page-granular, 32-bit
DB 0
;
; Spare segment descriptor
;
SYS16_CODE_SEL EQU $ - GDT_BASE ; Selector [0x28]
DW 0FFFFh ; limit 0xFFFFF
DW 0 ; base 0
DB 0Eh ; Changed from F000 to E000.
DB 09Bh ; present, ring 0, code, expand-up, writable
DB 00h ; byte-granular, 16-bit
DB 0
;
; Spare segment descriptor
;
SYS16_DATA_SEL EQU $ - GDT_BASE ; Selector [0x30]
DW 0FFFFh ; limit 0xFFFF
DW 0 ; base 0
DB 0
DB 093h ; present, ring 0, data, expand-up, not-writable
DB 00h ; byte-granular, 16-bit
DB 0
;
; Spare segment descriptor
;
SPARE5_SEL EQU $ - GDT_BASE ; Selector [0x38]
DW 0 ; limit 0
DW 0 ; base 0
DB 0
DB 0 ; present, ring 0, data, expand-up, writable
DB 0 ; page-granular, 32-bit
DB 0
GDT_SIZE EQU $ - BootGdtTable ; Size, in bytes
;
; GDT Descriptor
;
GdtDesc: ; GDT descriptor
DW GDT_SIZE - 1 ; GDT limit
DD OFFSET BootGdtTable ; GDT base address
ProtectedModeEntryLinearAddress LABEL FWORD
ProtectedModeEntryLinearOffset LABEL DWORD
DD OFFSET ProtectedModeEntryPoint ; Offset of our 32 bit code
DW LINEAR_CODE_SEL
_TEXT_PROTECTED_MODE ENDS
END

View File

@@ -0,0 +1,77 @@
#------------------------------------------------------------------------------
#
# Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php.
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
# Abstract:
#
# Switch the stack from temporary memory to permenent memory.
#
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# VOID
# EFIAPI
# SecSwitchStack (
# UINT32 TemporaryMemoryBase,
# UINT32 PermenentMemoryBase
# )#
#------------------------------------------------------------------------------
ASM_GLOBAL ASM_PFX (SecSwitchStack)
ASM_PFX(SecSwitchStack):
#
# Save standard registers so they can be used to change stack
#
pushl %eax
pushl %ebx
pushl %ecx
pushl %edx
#
# !!CAUTION!! this function address's is pushed into stack after
# migration of whole temporary memory, so need save it to permenent
# memory at first!
#
movl 20(%esp), %ebx # Save the first parameter
movl 24(%esp), %ecx # Save the second parameter
#
# Save this function's return address into permenent memory at first.
# Then, Fixup the esp point to permenent memory
#
movl %esp, %eax
subl %ebx, %eax
addl %ecx, %eax
movl 0(%esp), %edx # copy pushed register's value to permenent memory
movl %edx, 0(%eax)
movl 4(%esp), %edx
movl %edx, 4(%eax)
movl 8(%esp), %edx
movl %edx, 8(%eax)
movl 12(%esp), %edx
movl %edx, 12(%eax)
movl 16(%esp), %edx # Update this function's return address into permenent memory
movl %edx, 16(%eax)
movl %eax, %esp # From now, esp is pointed to permenent memory
#
# Fixup the ebp point to permenent memory
#
movl %ebp, %eax
subl %ebx, %eax
addl %ecx, %eax
movl %eax, %ebp # From now, ebp is pointed to permenent memory
popl %edx
popl %ecx
popl %ebx
popl %eax
ret

View File

@@ -0,0 +1,82 @@
;------------------------------------------------------------------------------
;
; Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
; This program and the accompanying materials
; are licensed and made available under the terms and conditions of the BSD License
; which accompanies this distribution. The full text of the license may be found at
; http://opensource.org/licenses/bsd-license.php.
;
; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
;
; Abstract:
;
; Switch the stack from temporary memory to permenent memory.
;
;------------------------------------------------------------------------------
.586p
.model flat,C
.code
;------------------------------------------------------------------------------
; VOID
; EFIAPI
; SecSwitchStack (
; UINT32 TemporaryMemoryBase,
; UINT32 PermenentMemoryBase
; );
;------------------------------------------------------------------------------
SecSwitchStack PROC
;
; Save three register: eax, ebx, ecx
;
push eax
push ebx
push ecx
push edx
;
; !!CAUTION!! this function address's is pushed into stack after
; migration of whole temporary memory, so need save it to permenent
; memory at first!
;
mov ebx, [esp + 20] ; Save the first parameter
mov ecx, [esp + 24] ; Save the second parameter
;
; Save this function's return address into permenent memory at first.
; Then, Fixup the esp point to permenent memory
;
mov eax, esp
sub eax, ebx
add eax, ecx
mov edx, dword ptr [esp] ; copy pushed register's value to permenent memory
mov dword ptr [eax], edx
mov edx, dword ptr [esp + 4]
mov dword ptr [eax + 4], edx
mov edx, dword ptr [esp + 8]
mov dword ptr [eax + 8], edx
mov edx, dword ptr [esp + 12]
mov dword ptr [eax + 12], edx
mov edx, dword ptr [esp + 16] ; Update this function's return address into permenent memory
mov dword ptr [eax + 16], edx
mov esp, eax ; From now, esp is pointed to permenent memory
;
; Fixup the ebp point to permenent memory
;
mov eax, ebp
sub eax, ebx
add eax, ecx
mov ebp, eax ; From now, ebp is pointed to permenent memory
pop edx
pop ecx
pop ebx
pop eax
ret
SecSwitchStack ENDP
END