Upload BSD-licensed Vlv2TbltDevicePkg and Vlv2DeviceRefCodePkg to

https://svn.code.sf.net/p/edk2/code/trunk/edk2/, 

which are for MinnowBoard MAX open source project.


Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Wei <david.wei@intel.com>
Reviewed-by: Mike Wu <mike.wu@intel.com>
Reviewed-by: Hot Tian <hot.tian@intel.com>


git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16599 6f19259b-4bc3-4df7-8a09-765794883524

Vlv2TbltDevicePkg/Include/Guid/HwWatchdogTimerHob.h

@@ -0,0 +1,139 @@
+/*++
+
+  Copyright (c) 2004  - 2014, Intel Corporation. All rights reserved.<BR>
+                                                                                   
+
+  This program and the accompanying materials are licensed and made available under
+
+  the terms and conditions of the BSD License that accompanies this distribution.  
+
+  The full text of the license may be found at                                     
+
+  http://opensource.org/licenses/bsd-license.php.                                  
+
+                                                                                   
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,            
+
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.    
+
+                                                                                   
+
+
+
+Module Name:
+
+  HwWatchdogTimerHob.h
+
+Abstract:
+
+  GUID used for Watchdog Timer status in the HOB list.
+
+--*/
+
+#ifndef _EFI_WATCHDOG_TIMER_HOB_GUID_H_
+#define _EFI_WATCHDOG_TIMER_HOB_GUID_H_
+
+#define EFI_WATCHDOG_TIMER_HOB_GUID \
+  { 0x226cd3f, 0x69b5, 0x4150, 0xac, 0xbe, 0xbf, 0xbf, 0x18, 0xe3, 0x3, 0xd5 }
+
+#define EFI_WATCHDOG_TIMER_DEFINITION_HOB_GUID \
+  { 0xd29302b0, 0x11ba, 0x4073, 0xa2, 0x27, 0x53, 0x8d, 0x25, 0x42, 0x70, 0x9f }
+
+typedef enum {
+  HWWD_NONE,
+  HWWD_TIMER_EXPIRED,
+  HWWD_SPONTANEOUS_REBOOT,
+  HWWD_FORCED_TIMEOUT
+} HW_WATCHDOG_TIMEOUT;
+
+typedef struct {
+  HW_WATCHDOG_TIMEOUT         TimeoutStatus;
+} HW_WATCHDOG_INFO;
+
+//
+// Watchdog timer action values.
+//
+#define WDT_ACTION_RESET                    0x01    // reload/reset timer
+#define WDT_ACTION_QUERY_CURRENT_VALUE      0x04    // get current value                     // DON'T NEED FOR OVERCLOCK UTILITY
+#define WDT_ACTION_QUERY_COUNTDOWN_PERIOD   0x05    // get countdown period
+#define WDT_ACTION_SET_COUNTDOWN_PERIOD     0x06    // set countdown period
+#define WDT_ACTION_QUERY_RUNNING_STATE      0x08    // query if running
+#define WDT_ACTION_SET_RUNNING_STATE        0x09    // start timer
+#define WDT_ACTION_QUERY_STOPPED_STATE      0x0A    // query if stopped
+#define WDT_ACTION_SET_STOPPED_STATE        0x0B    // stop timer
+#define WDT_ACTION_QUERY_STATUS             0x20    // is current boot cause by wdt timeout?
+#define WDT_ACTION_SET_STATUS               0x21    // resets wdt status bit
+
+//
+// Watchdog timer instruction values.
+//
+#define WDT_INSTR_VALUE_MASK                0x03    // Mask for just the value
+#define WDT_INSTR_READ_CMP_VALUE            0x00    // Read / compare value
+#define WDT_INSTR_READ_COUNTDOWN            0x01    // read countdown value
+#define WDT_INSTR_WRITE_VALUE               0x02    // Write value
+#define WDT_INSTR_WRITE_COUNTDOWN           0x03    // write countdown value
+#define WDT_INSTR_PRESERVE_REG              0x80    // preserve reg; used in Write Value / Write Countdown
+#define WDT_INSTR_WRITE_VALUE_PRES         (0x02 | WDT_INSTR_PRESERVE_REG)   // Write value with preserve
+#define WDT_INSTR_WRITE_COUNTDOWN_PRES     (0x03 | WDT_INSTR_PRESERVE_REG)   // write countdown value with preserve
+
+//
+// The Generic Address Structure is defined in the ACPI Specification and should only be
+// changed to match updated revisions of that specification.  The GAS_ADDRESS_SPACE and
+// GAS_ACCESS_SIZE enumerations are also defined by the ACPI Specification.
+//
+typedef enum {
+  GAS_SYSTEM_MEMORY,
+  GAS_SYSTEM_IO,
+  GAS_PCI_CONFIG_SPACE,
+  GAS_EMBEDDED_CONTROLLER,
+  GAS_SMBUS
+} GAS_ADDRESS_SPACE;
+
+typedef enum {
+  GAS_UNDEFINED,
+  GAS_BYTE_ACCESS,
+  GAS_WORD_ACCESS,
+  GAS_DWORD_ACCESS,
+  GAS_QWORD_ACCESS
+} GAS_ACCESS_SIZE;
+
+#pragma pack(1)
+
+typedef struct {
+  UINT8                       AddressSpaceId;
+  UINT8                       RegisterBitWidth;
+  UINT8                       RegisterBitOffset;
+  UINT8                       AccessSize;
+  UINT64                      Address;
+} GENERIC_ADDRESS_STRUCTURE;
+
+//
+// GAS_SYSTEM_MEMORY -    When used as the AddressSpaceId, the 64-bit physical memory address
+//                        of the register.  32-bit platforms must have the high DWORD set to 0.
+// GAS_SYSTEM_IO -        The 64-bit I/O address of the register.  32-bit platforms must have
+//                        the high DWORD set to 0.
+// GAS_PCI_CONFIG_SPACE - PCI Configuration space addresses must be confined to devices on PCI
+//                        Sepment Group 0, Bus 0.  This restriction exists to accommodate access
+//                        to fixed hardware prior to PCI bus enumeration.  The format of addresses
+//                        are defined as follows:
+//                            Highest WORD: Reserved and must be -0-
+//                            ...           PCI Device number on bus 0
+//                            ...           PCI Function number
+//                            Lowest WORD:  Offset in the configuration space header.
+//
+
+typedef struct {
+  UINT8                       WdAction;
+  UINT8                       Flag;
+  UINT16                      Res;
+  GENERIC_ADDRESS_STRUCTURE   GenericAddressStructures;
+  UINT32                      Value;
+  UINT32                      Mask;
+} WD_INSTRUCTION;
+
+typedef struct {
+  UINT32                      TimerPeriod;
+  UINT32                      MaxTimerCount;
+  UINT32                      MinTimerCount;
+  UINT16                      InstructionCount;