sravan/system76-edk2
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Upload BSD-licensed Vlv2TbltDevicePkg and Vlv2DeviceRefCodePkg to

Browse Source 
https://svn.code.sf.net/p/edk2/code/trunk/edk2/, 

which are for MinnowBoard MAX open source project.


Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Wei <david.wei@intel.com>
Reviewed-by: Mike Wu <mike.wu@intel.com>
Reviewed-by: Hot Tian <hot.tian@intel.com>


git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16599 6f19259b-4bc3-4df7-8a09-765794883524
This commit is contained in:
David Wei
2015-01-12 09:37:20 +00:00
committed by zwei4
parent 6f785cfcc3
commit 3cbfba02fe
518 changed files with 118538 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

143
Vlv2TbltDevicePkg/Include/Protocol/I2cHostMcg.h Normal file
View File

@@ -0,0 +1,143 @@
/*++
Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available under
the terms and conditions of the BSD License that accompanies this distribution.
The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef __I2C_HOST_H__
#define __I2C_HOST_H__
#include <Protocol/I2cMasterMcg.h>
/**
Declare the forward references
**/
typedef struct _EFI_I2C_HOST_PROTOCOL EFI_I2C_HOST_PROTOCOL;
typedef struct _EFI_I2C_HOST_CALLBACKS EFI_I2C_HOST_CALLBACKS;
/**
Queue an I2C operation for execution on the I2C controller.
This routine must be called at or below TPL_NOTIFY. For synchronous
requests this routine must be called at or below TPL_CALLBACK.
N.B. The typical consumers of this API are the I2C bus driver and
on rare occasions the I2C test application. Extreme care must be
taken by other consumers of this API to prevent confusing the
third party I2C drivers due to a state change at the I2C device
which the third party I2C drivers did not initiate. I2C platform
drivers may use this API within these guidelines.
This layer uses the concept of I2C bus configurations to describe
the I2C bus. An I2C bus configuration is defined as a unique
setting of the multiplexers and switches in the I2C bus which
enable access to one or more I2C devices. When using a switch
to divide a bus, due to speed differences, the I2C platform layer
would define an I2C bus configuration for the I2C devices on each
side of the switch. When using a multiplexer, the I2C platform
layer defines an I2C bus configuration for each of the selector
values required to control the multiplexer. See Figure 1 in the
<a href="http://www.nxp.com/documents/user_manual/UM10204.pdf">I<sup>2</sup>C
Specification</a> for a complex I2C bus configuration.
The I2C host driver processes all operations in FIFO order. Prior to
performing the operation, the I2C host driver calls the I2C platform
driver to reconfigure the switches and multiplexers in the I2C bus
enabling access to the specified I2C device. The I2C platform driver
also selects the maximum bus speed for the device. After the I2C bus
is configured, the I2C host driver calls the I2C port driver to
initialize the I2C controller and start the I2C operation.
@param[in] This Address of an EFI_I2C_HOST_PROTOCOL instance.
@param[in] I2cBusConfiguration I2C bus configuration to access the I2C
device.
@param[in] SlaveAddress Address of the device on the I2C bus.
@param[in] Event Event to set for asynchronous operations,
NULL for synchronous operations
@param[in] RequestPacket Address of an EFI_I2C_REQUEST_PACKET
structure describing the I2C operation
@param[out] I2cStatus Optional buffer to receive the I2C operation
completion status
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_ABORTED The request did not complete because the driver
was shutdown.
@retval EFI_BAD_BUFFER_SIZE The WriteBytes or ReadBytes buffer size is too large.
@retval EFI_DEVICE_ERROR There was an I2C error (NACK) during the operation.
This could indicate the slave device is not present.
@retval EFI_INVALID_PARAMETER RequestPacket is NULL
@retval EFI_INVALID_PARAMETER TPL is too high
@retval EFI_NO_MAPPING Invalid I2cBusConfiguration value
@retval EFI_NO_RESPONSE The I2C device is not responding to the
slave address. EFI_DEVICE_ERROR may also be
returned if the controller cannot distinguish
when the NACK occurred.
@retval EFI_NOT_FOUND I2C slave address exceeds maximum address
@retval EFI_NOT_READY I2C bus is busy or operation pending, wait for
the event and then read status pointed to by
the request packet.
@retval EFI_OUT_OF_RESOURCES Insufficient memory for I2C operation
@retval EFI_TIMEOUT The transaction did not complete within an internally
specified timeout period.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_I2C_HOST_QUEUE_REQUEST) (
IN CONST EFI_I2C_HOST_PROTOCOL *This,
IN UINTN I2cBusConfiguration,
IN UINTN SlaveAddress,
IN EFI_EVENT Event OPTIONAL,
IN CONST EFI_I2C_REQUEST_PACKET *RequestPacket,
OUT EFI_STATUS *I2cStatus OPTIONAL
);
///
/// Host access to the I2C bus.
///
struct _EFI_I2C_HOST_PROTOCOL {
///
/// Queue an operation for execution on the I2C bus
///
EFI_I2C_HOST_QUEUE_REQUEST QueueRequest;
///
/// The maximum number of I2C bus configurations
///
UINTN I2cBusConfigurationCount;
///
/// The maximum number of bytes the I2C host controller
/// is able to receive from the I2C bus.
///
UINT32 MaximumReceiveBytes;
///
/// The maximum number of bytes the I2C host controller
/// is able to send on the I2C bus.
///
UINT32 MaximumTransmitBytes;
///
/// The maximum number of bytes in the I2C bus transaction.
///