ArmPlatformPkg: Removed the 'Identify' functions

This function was introduced in some drivers to check if the ARM controller
was present in the memory map.
It was using a 8 bit access to get the value from the Identification registers.
These accesses could generate access error on some buses. Instead of replacing
the 8bit access by a 32bit access, these fcuntions have been removed because
they are only useful when the boot firmware is ported on a new platform.

Signed-off-by: Olivier Martin <olivier.martin@arm.com>



git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13247 6f19259b-4bc3-4df7-8a09-765794883524
This commit is contained in:
oliviermartin
2012-05-02 19:52:49 +00:00
parent d9efd68ef5
commit 3f305c063a
2 changed files with 3 additions and 65 deletions

View File

@@ -29,30 +29,6 @@
EFI_EVENT EfiExitBootServicesEvent = (EFI_EVENT)NULL;
EFI_STATUS
SP805Identify (
VOID
)
{
// Check if this is a PrimeCell Peripheral
if ( (MmioRead8 (SP805_WDOG_PCELL_ID0) != 0x0D)
|| (MmioRead8 (SP805_WDOG_PCELL_ID1) != 0xF0)
|| (MmioRead8 (SP805_WDOG_PCELL_ID2) != 0x05)
|| (MmioRead8 (SP805_WDOG_PCELL_ID3) != 0xB1)) {
return EFI_NOT_FOUND;
}
// Check if this PrimeCell Peripheral is the SP805 Watchdog Timer
if ( (MmioRead8 (SP805_WDOG_PERIPH_ID0) != 0x05)
|| (MmioRead8 (SP805_WDOG_PERIPH_ID1) != 0x18)
|| ((MmioRead8 (SP805_WDOG_PERIPH_ID2) & 0x0000000F) != 0x04)
|| (MmioRead8 (SP805_WDOG_PERIPH_ID3) != 0x00)) {
return EFI_NOT_FOUND;
}
return EFI_SUCCESS;
}
/**
Make sure the SP805 registers are unlocked for writing.
@@ -363,13 +339,6 @@ SP805Initialize (
EFI_STATUS Status;
EFI_HANDLE Handle;
// Check if the SP805 hardware watchdog module exists on board
Status = SP805Identify();
if (EFI_ERROR(Status)) {
Status = EFI_DEVICE_ERROR;
goto EXIT;
}
// Unlock access to the SP805 registers
SP805Unlock ();
@@ -409,7 +378,7 @@ SP805Initialize (
goto EXIT;
}
EXIT:
EXIT:
if(EFI_ERROR(Status)) {
// The watchdog failed to initialize
ASSERT(FALSE);