Sync USB modules with main trunk.

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@3423 6f19259b-4bc3-4df7-8a09-765794883524
This commit is contained in:
vanjeff
2007-07-24 09:54:50 +00:00
parent d19862fe4f
commit 50fa1b3a86
6 changed files with 332 additions and 141 deletions

View File

@@ -39,12 +39,14 @@ enum {
USB_BOOT_INQUIRY_OPCODE = 0x12,
USB_BOOT_REQUEST_SENSE_OPCODE = 0x03,
USB_BOOT_MODE_SENSE10_OPCODE = 0x5a,
USB_BOOT_MODE_SENSE10_OPCODE = 0x5A,
USB_BOOT_READ_CAPACITY_OPCODE = 0x25,
USB_BOOT_TEST_UNIT_READY_OPCODE = 0x00,
USB_BOOT_READ10_OPCODE = 0x28,
USB_BOOT_WRITE10_OPCODE = 0x2a,
USB_BOOT_WRITE10_OPCODE = 0x2A,
USB_SCSI_MODE_SENSE6_OPCODE = 0x1A,
//
// The Sense Key part of the sense data. Sense data has three levels:
// Sense key, Additional Sense Code and Additional Sense Code Qualifier
@@ -64,13 +66,9 @@ enum {
USB_BOOT_SENSE_MISCOMPARE = 0x0E, // Source data mis-match while verfying.
USB_BOOT_ASC_NOT_READY = 0x04,
USB_BOOT_ASC_MEDIA_UPSIDE_DOWN = 0x06,
USB_BOOT_ASC_NO_MEDIA = 0x3A,
USB_BOOT_ASC_MEDIA_CHANGE = 0x28,
USB_BOOT_ASCQ_IN_PROGRESS = 0x01,
USB_BOOT_ASCQ_DEVICE_BUSY = 0xFF,
//
// Other parameters
//
@@ -90,11 +88,13 @@ enum {
//
// Boot Transfer timeout
//
USB_BOOT_GENERAL_BLOCK_TIMEOUT = 200 * USB_MASS_STALL_1_MS,
USB_BOOT_OPTICAL_BLOCK_TIMEOUT = 1 * USB_MASS_STALL_1_S,
USB_BOOT_GENERAL_CMD_TIMEOUT = 1 * USB_MASS_STALL_1_S,
USB_BOOT_INQUIRY_CMD_TIMEOUT = 3 * USB_MASS_STALL_1_S,
// USB2.0 Spec define the up-limit timeout 5s for all command. USB floppy,
// USB CD-Rom and iPod devices are much slower than USB key when reponse
// most of commands, So we set 5s as timeout here.
//
//
USB_BOOT_GENERAL_CMD_TIMEOUT = 5 * USB_MASS_STALL_1_S,
//
// Supported PDT codes, or Peripheral Device Type
//
@@ -159,7 +159,7 @@ typedef struct {
UINT8 ParaListLenLsb;
UINT8 Reserved1;
UINT8 Pad[2];
} USB_BOOT_MODE_SENSE_CMD;
} USB_BOOT_MODE_SENSE10_CMD;
typedef struct {
UINT8 ModeDataLenMsb;
@@ -167,7 +167,7 @@ typedef struct {
UINT8 Reserved0[4];
UINT8 BlkDesLenMsb;
UINT8 BlkDesLenLsb;
} USB_BOOT_MODE_PARA_HEADER;
} USB_BOOT_MODE_SENSE10_PARA_HEADER;
typedef struct {
UINT8 OpCode;
@@ -209,6 +209,22 @@ typedef struct {
UINT8 ASCQ; // Additional Sense Code Qualifier
UINT8 Reserverd2[4];
} USB_BOOT_REQUEST_SENSE_DATA;
typedef struct {
UINT8 OpCode;
UINT8 Lun;
UINT8 PageCode;
UINT8 Reserved0;
UINT8 AllocateLen;
UINT8 Control;
} USB_SCSI_MODE_SENSE6_CMD;
typedef struct {
UINT8 ModeDataLen;
UINT8 MediumType;
UINT8 DevicePara;
UINT8 BlkDesLen;
} USB_SCSI_MODE_SENSE6_PARA_HEADER;
#pragma pack()
//