sravan/system76-edk2
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

PcAtChipsetPkg: Fix spelling errors

Browse Source 
https://bugzilla.tianocore.org/show_bug.cgi?id=2263

Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This commit is contained in:
Sean Brogan
2019-10-08 21:55:54 -07:00
committed by Michael D Kinney
parent 44c9618a3f
commit 53b1dd1036
11 changed files with 25 additions and 25 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
PcAtChipsetPkg/Library/BaseIoApicLib/IoApicLib.c
View File

@@ -94,7 +94,7 @@ IoApicEnableInterrupt (
Configures an I/O APIC interrupt.
Configure an I/O APIC Redirection Table Entry to deliver an interrupt in physical
mode to the Local APIC of the currntly executing CPU. The default state of the
mode to the Local APIC of the currently executing CPU. The default state of the
entry is for the interrupt to be disabled (masked). IoApicEnableInterrupts() must
be used to enable(unmask) the I/O APIC Interrupt.

8
PcAtChipsetPkg/Library/SerialIoLib/SerialPortLib.c
View File

@@ -195,7 +195,7 @@ SerialPortRead (
/**
Polls a serial device to see if there is any data waiting to be read.
Polls aserial device to see if there is any data waiting to be read.
Polls a serial device to see if there is any data waiting to be read.
If there is data waiting to be read from the serial device, then TRUE is returned.
If there is no data waiting to be read from the serial device, then FALSE is returned.
@@ -339,13 +339,13 @@ SerialPortGetControl (
}
/**
Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
Sets the baud rate, receive FIFO depth, transmit/receive time out, parity,
data bits, and stop bits on a serial device.
@param BaudRate The requested baud rate. A BaudRate value of 0 will use the
device's default interface speed.
On output, the value actually set.
@param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the
@param ReceiveFifoDepth The requested depth of the FIFO on the receive side of the
serial interface. A ReceiveFifoDepth value of 0 will use
the device's default FIFO depth.
On output, the value actually set.
@@ -358,7 +358,7 @@ SerialPortGetControl (
DefaultParity will use the device's default parity value.
On output, the value actually set.
@param DataBits The number of data bits to use on the serial device. A DataBits
vaule of 0 will use the device's default data bit setting.
value of 0 will use the device's default data bit setting.
On output, the value actually set.
@param StopBits The number of stop bits to use on this serial device. A StopBits
value of DefaultStopBits will use the device's default number of