Moved the MdePkg to OldMdePkg so that new code in MdePkg does not break existing builds. Also updated the SPD and FPD files UiNames

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@2616 6f19259b-4bc3-4df7-8a09-765794883524
This commit is contained in:
lhauch
2007-06-01 14:49:55 +00:00
parent 144d783d40
commit 586cd1f1f4
1130 changed files with 4 additions and 4 deletions

View File

@@ -0,0 +1,124 @@
/** @file
This file contains some basic ACPI definitions that are consumed by drivers
that do not care about ACPI versions.
Copyright (c) 2006, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name: Acpi.h
**/
#ifndef _ACPI_H_
#define _ACPI_H_
//
// Common table header, this prefaces all ACPI tables, including FACS, but
// excluding the RSD PTR structure
//
typedef struct {
UINT32 Signature;
UINT32 Length;
} EFI_ACPI_COMMON_HEADER;
//
// Common ACPI description table header. This structure prefaces most ACPI tables.
//
#pragma pack(1)
typedef struct {
UINT32 Signature;
UINT32 Length;
UINT8 Revision;
UINT8 Checksum;
UINT8 OemId[6];
UINT64 OemTableId;
UINT32 OemRevision;
UINT32 CreatorId;
UINT32 CreatorRevision;
} EFI_ACPI_DESCRIPTION_HEADER;
#pragma pack()
//
// Define for Pci Host Bridge Resource Allocation
//
#define ACPI_ADDRESS_SPACE_DESCRIPTOR 0x8A
#define ACPI_END_TAG_DESCRIPTOR 0x79
#define ACPI_ADDRESS_SPACE_TYPE_MEM 0x00
#define ACPI_ADDRESS_SPACE_TYPE_IO 0x01
#define ACPI_ADDRESS_SPACE_TYPE_BUS 0x02
//
// Power Management Timer frequency is fixed at 3.579545MHz
//
#define ACPI_TIMER_FREQUENCY 3579545
//
// Make sure structures match spec
//
#pragma pack(1)
typedef struct {
UINT8 Desc;
UINT16 Len;
UINT8 ResType;
UINT8 GenFlag;
UINT8 SpecificFlag;
UINT64 AddrSpaceGranularity;
UINT64 AddrRangeMin;
UINT64 AddrRangeMax;
UINT64 AddrTranslationOffset;
UINT64 AddrLen;
} EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR;
typedef struct {
UINT8 Desc;
UINT8 Checksum;
} EFI_ACPI_END_TAG_DESCRIPTOR;
//
// General use definitions
//
#define EFI_ACPI_RESERVED_BYTE 0x00
#define EFI_ACPI_RESERVED_WORD 0x0000
#define EFI_ACPI_RESERVED_DWORD 0x00000000
#define EFI_ACPI_RESERVED_QWORD 0x0000000000000000
//
// Resource Type Specific Flags
// Ref ACPI specification 6.4.3.5.5
//
// Bit [0] : Write Status, _RW
//
#define EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_READ_WRITE (1 << 0)
#define EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_READ_ONLY (0 << 0)
//
// Bit [2:1] : Memory Attributes, _MEM
//
#define EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_NON_CACHEABLE (0 << 1)
#define EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE (1 << 1)
#define EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_WRITE_COMBINING (2 << 1)
#define EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE (3 << 1)
//
// Bit [4:3] : Memory Attributes, _MTP
//
#define EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_ADDRESS_RANGE_MEMORY (0 << 3)
#define EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_ADDRESS_RANGE_RESERVED (1 << 3)
#define EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_ADDRESS_RANGE_ACPI (2 << 3)
#define EFI_APCI_MEMORY_RESOURCE_SPECIFIC_FLAG_ADDRESS_RANGE_NVS (3 << 3)
//
// Bit [5] : Memory to I/O Translation, _TTP
//
#define EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_TYPE_TRANSLATION (1 << 5)
#define EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_TYPE_STATIC (0 << 5)
#pragma pack()
#endif

View File

@@ -0,0 +1,62 @@
/** @file
EFI Guid Partition Table Format Definition.
Copyright (c) 2006, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
--*/
#ifndef _EFIGPT_H_
#define _EFIGPT_H_
#define PRIMARY_PART_HEADER_LBA 1
#define EFI_PTAB_HEADER_ID "EFI PART"
#pragma pack(1)
//
// GPT Partition Table Header
//
typedef struct {
EFI_TABLE_HEADER Header;
EFI_LBA MyLBA;
EFI_LBA AlternateLBA;
EFI_LBA FirstUsableLBA;
EFI_LBA LastUsableLBA;
EFI_GUID DiskGUID;
EFI_LBA PartitionEntryLBA;
UINT32 NumberOfPartitionEntries;
UINT32 SizeOfPartitionEntry;
UINT32 PartitionEntryArrayCRC32;
} EFI_PARTITION_TABLE_HEADER;
//
// GPT Partition Entry
//
typedef struct {
EFI_GUID PartitionTypeGUID;
EFI_GUID UniquePartitionGUID;
EFI_LBA StartingLBA;
EFI_LBA EndingLBA;
UINT64 Attributes;
CHAR16 PartitionName[36];
} EFI_PARTITION_ENTRY;
//
// GPT Partition Entry Status
//
typedef struct {
BOOLEAN OutOfRange;
BOOLEAN Overlap;
} EFI_PARTITION_ENTRY_STATUS;
#pragma pack()
#endif

View File

@@ -0,0 +1,58 @@
/** @file
Support for EFI PCI specification.
Copyright (c) 2006, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name: EfiPci.h
**/
#ifndef _EFI_PCI_H_
#define _EFI_PCI_H_
//#include "pci22.h"
//#include "pci23.h"
//#include "pci30.h"
#pragma pack(push, 1)
typedef struct {
UINT8 Register;
UINT8 Function;
UINT8 Device;
UINT8 Bus;
UINT8 Reserved[4];
} DEFIO_PCI_ADDR;
#define EFI_ROOT_BRIDGE_LIST 'eprb'
#define EFI_PCI_EXPANSION_ROM_HEADER_EFISIGNATURE 0x0EF1
typedef struct {
UINT16 Signature; // 0xaa55
UINT16 InitializationSize;
UINT32 EfiSignature; // 0x0EF1
UINT16 EfiSubsystem;
UINT16 EfiMachineType;
UINT16 CompressionType;
UINT8 Reserved[8];
UINT16 EfiImageHeaderOffset;
UINT16 PcirOffset;
} EFI_PCI_EXPANSION_ROM_HEADER;
typedef union {
UINT8 *Raw;
PCI_EXPANSION_ROM_HEADER *Generic;
EFI_PCI_EXPANSION_ROM_HEADER *Efi;
EFI_LEGACY_EXPANSION_ROM_HEADER *PcAt;
} EFI_PCI_ROM_HEADER;
#pragma pack(pop)
#endif

View File

@@ -0,0 +1,123 @@
/** @file
ElTorito Partitions Format Definition.
Copyright (c) 2006, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
--*/
#ifndef _ELTORITO_H_
#define _ELTORITO_H_
//
// CDROM_VOLUME_DESCRIPTOR.Types
//
#define CDVOL_TYPE_STANDARD 0x0
#define CDVOL_TYPE_CODED 0x1
#define CDVOL_TYPE_END 0xFF
//
// CDROM_VOLUME_DESCRIPTOR.Id
//
#define CDVOL_ID "CD001"
//
// CDROM_VOLUME_DESCRIPTOR.SystemId
//
#define CDVOL_ELTORITO_ID "EL TORITO SPECIFICATION"
//
// Indicator types
//
#define ELTORITO_ID_CATALOG 0x01
#define ELTORITO_ID_SECTION_BOOTABLE 0x88
#define ELTORITO_ID_SECTION_NOT_BOOTABLE 0x00
#define ELTORITO_ID_SECTION_HEADER 0x90
#define ELTORITO_ID_SECTION_HEADER_FINAL 0x91
//
// ELTORITO_CATALOG.Boot.MediaTypes
//
#define ELTORITO_NO_EMULATION 0x00
#define ELTORITO_12_DISKETTE 0x01
#define ELTORITO_14_DISKETTE 0x02
#define ELTORITO_28_DISKETTE 0x03
#define ELTORITO_HARD_DISK 0x04
#pragma pack(1)
//
// El Torito Volume Descriptor
// Note that the CDROM_VOLUME_DESCRIPTOR does not match the ISO-9660
// descriptor. For some reason descriptor used by El Torito is
// different, but they start the same. The El Torito descriptor
// is left shifted 1 byte starting with the SystemId. (Note this
// causes the field to get unaligned)
//
typedef struct {
UINT8 Type;
CHAR8 Id[5]; // CD001
UINT8 Version;
CHAR8 SystemId[26];
CHAR8 Unused[38];
UINT8 EltCatalog[4];
CHAR8 Unused2[5];
UINT32 VolSpaceSize[2];
} CDROM_VOLUME_DESCRIPTOR;
//
// Catalog Entry
//
typedef union {
struct {
CHAR8 Reserved[0x20];
} Unknown;
//
// Catalog validation entry (Catalog header)
//
struct {
UINT8 Indicator;
UINT8 PlatformId;
UINT16 Reserved;
CHAR8 ManufacId[24];
UINT16 Checksum;
UINT16 Id55AA;
} Catalog;
//
// Initial/Default Entry or Section Entry
//
struct {
UINT8 Indicator;
UINT8 MediaType : 4;
UINT8 Reserved1 : 4;
UINT16 LoadSegment;
UINT8 SystemType;
UINT8 Reserved2;
UINT16 SectorCount;
UINT32 Lba;
} Boot;
//
// Section Header Entry
//
struct {
UINT8 Indicator;
UINT8 PlatformId;
UINT16 SectionEntries;
CHAR8 Id[28];
} Section;
} ELTORITO_CATALOG;
#pragma pack()
#endif

View File

@@ -0,0 +1,62 @@
/** @file
Legacy Master Boot Record Format Definition.
Copyright (c) 2006, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
--*/
#ifndef _MBR_H_
#define _MBR_H_
#define MBR_SIGNATURE 0xaa55
#define MIN_MBR_DEVICE_SIZE 0x80000
#define MBR_ERRATA_PAD 0x40000 // 128 MB
#define EXTENDED_DOS_PARTITION 0x05
#define EXTENDED_WINDOWS_PARTITION 0x0F
#define MAX_MBR_PARTITIONS 4
#define PMBR_GPT_PARTITION 0xEE
#define EFI_PARTITION 0xEF
#define MBR_SIZE 512
#pragma pack(1)
//
// MBR Partition Entry
//
typedef struct {
UINT8 BootIndicator;
UINT8 StartHead;
UINT8 StartSector;
UINT8 StartTrack;
UINT8 OSIndicator;
UINT8 EndHead;
UINT8 EndSector;
UINT8 EndTrack;
UINT8 StartingLBA[4];
UINT8 SizeInLBA[4];
} MBR_PARTITION_RECORD;
//
// MBR Partition table
//
typedef struct {
UINT8 BootStrapCode[440];
UINT8 UniqueMbrSignature[4];
UINT8 Unknown[2];
MBR_PARTITION_RECORD Partition[MAX_MBR_PARTITIONS];
UINT16 Signature;
} MASTER_BOOT_RECORD;
#pragma pack()
#endif

View File

@@ -0,0 +1,48 @@
/** @file
This file declares the SMBus definitions defined in SmBus Specifciation
V2.0.
Copyright (c) 2007, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
@par Revision Reference:
These definitions are defined in System Management Bus (SmBus) Specification V2.0.
**/
#ifndef _SMBUS_H_
#define _SMBUS_H_
//
// Smbus Device Address, Smbus Device Command, Smbus Operations
//
typedef struct {
UINTN SmbusDeviceAddress : 7;
} EFI_SMBUS_DEVICE_ADDRESS;
typedef UINTN EFI_SMBUS_DEVICE_COMMAND;
typedef enum _EFI_SMBUS_OPERATION
{
EfiSmbusQuickRead,
EfiSmbusQuickWrite,
EfiSmbusReceiveByte,
EfiSmbusSendByte,
EfiSmbusReadByte,
EfiSmbusWriteByte,
EfiSmbusReadWord,
EfiSmbusWriteWord,
EfiSmbusReadBlock,
EfiSmbusWriteBlock,
EfiSmbusProcessCall,
EfiSmbusBWBRProcessCall
} EFI_SMBUS_OPERATION;
#endif

View File

@@ -0,0 +1,285 @@
/** @file
Support for USB 1.1 standard.
Copyright (c) 2006, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name: Usb.h
**/
#ifndef __USB_H__
#define __USB_H__
//
// USB Descriptor types
//
#define USB_DT_DEVICE 0x01
#define USB_DT_CONFIG 0x02
#define USB_DT_STRING 0x03
#define USB_DT_INTERFACE 0x04
#define USB_DT_ENDPOINT 0x05
#define USB_DT_HUB 0x29
#define USB_DT_HID 0x21
//
// USB request type
//
#define USB_TYPE_STANDARD (0x00 << 5)
#define USB_TYPE_CLASS (0x01 << 5)
#define USB_TYPE_VENDOR (0x02 << 5)
#define USB_TYPE_RESERVED (0x03 << 5)
//
// USB request targer device
//
#define USB_RECIP_DEVICE 0x00
#define USB_RECIP_INTERFACE 0x01
#define USB_RECIP_ENDPOINT 0x02
#define USB_RECIP_OTHER 0x03
//
// Request target types.
//
#define USB_RT_DEVICE 0x00
#define USB_RT_INTERFACE 0x01
#define USB_RT_ENDPOINT 0x02
#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE)
#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER)
//
// USB Transfer Results
//
#define EFI_USB_NOERROR 0x00
#define EFI_USB_ERR_NOTEXECUTE 0x01
#define EFI_USB_ERR_STALL 0x02
#define EFI_USB_ERR_BUFFER 0x04
#define EFI_USB_ERR_BABBLE 0x08
#define EFI_USB_ERR_NAK 0x10
#define EFI_USB_ERR_CRC 0x20
#define EFI_USB_ERR_TIMEOUT 0x40
#define EFI_USB_ERR_BITSTUFF 0x80
#define EFI_USB_ERR_SYSTEM 0x100
//
//Use 200 ms to increase the error handling response time
//
#define EFI_USB_INTERRUPT_DELAY 2000000
//
// USB transation direction
//
typedef enum {
EfiUsbDataIn,
EfiUsbDataOut,
EfiUsbNoData
} EFI_USB_DATA_DIRECTION;
//
// Usb Data recipient type
//
typedef enum {
EfiUsbDevice,
EfiUsbInterface,
EfiUsbEndpoint
} EFI_USB_RECIPIENT;
typedef enum {
EfiUsbEndpointHalt,
EfiUsbDeviceRemoteWakeup
} EFI_USB_STANDARD_FEATURE_SELECTOR;
#pragma pack(1)
//
// Usb device request structure
//
typedef struct {
UINT8 RequestType;
UINT8 Request;
UINT16 Value;
UINT16 Index;
UINT16 Length;
} EFI_USB_DEVICE_REQUEST;
//
// Standard USB request
//
#define USB_DEV_GET_STATUS 0x00
#define USB_DEV_CLEAR_FEATURE 0x01
#define USB_DEV_SET_FEATURE 0x03
#define USB_DEV_SET_ADDRESS 0x05
#define USB_DEV_SET_ADDRESS_REQ_TYPE 0x00
#define USB_DEV_GET_DESCRIPTOR 0x06
#define USB_DEV_GET_DESCRIPTOR_REQ_TYPE 0x80
#define USB_DEV_SET_DESCRIPTOR 0x07
#define USB_DEV_SET_DESCRIPTOR_REQ_TYPE 0x00
#define USB_DEV_GET_CONFIGURATION 0x08
#define USB_DEV_GET_CONFIGURATION_REQ_TYPE 0x80
#define USB_DEV_SET_CONFIGURATION 0x09
#define USB_DEV_SET_CONFIGURATION_REQ_TYPE 0x00
#define USB_DEV_GET_INTERFACE 0x0A
#define USB_DEV_GET_INTERFACE_REQ_TYPE 0x81
#define USB_DEV_SET_INTERFACE 0x0B
#define USB_DEV_SET_INTERFACE_REQ_TYPE 0x01
#define USB_DEV_SYNCH_FRAME 0x0C
#define USB_DEV_SYNCH_FRAME_REQ_TYPE 0x82
//
// Device descriptor. refer USB1.1
//
typedef struct usb_device_descriptor {
UINT8 Length;
UINT8 DescriptorType;
UINT16 BcdUSB;
UINT8 DeviceClass;
UINT8 DeviceSubClass;
UINT8 DeviceProtocol;
UINT8 MaxPacketSize0;
UINT16 IdVendor;
UINT16 IdProduct;
UINT16 BcdDevice;
UINT8 StrManufacturer;
UINT8 StrProduct;
UINT8 StrSerialNumber;
UINT8 NumConfigurations;
} EFI_USB_DEVICE_DESCRIPTOR;
//
// Endpoint descriptor
//
typedef struct {
UINT8 Length;
UINT8 DescriptorType;
UINT8 EndpointAddress;
UINT8 Attributes;
UINT16 MaxPacketSize;
UINT8 Interval;
} EFI_USB_ENDPOINT_DESCRIPTOR;
//
// Interface descriptor
//
typedef struct {
UINT8 Length;
UINT8 DescriptorType;
UINT8 InterfaceNumber;
UINT8 AlternateSetting;
UINT8 NumEndpoints;
UINT8 InterfaceClass;
UINT8 InterfaceSubClass;
UINT8 InterfaceProtocol;
UINT8 Interface;
} EFI_USB_INTERFACE_DESCRIPTOR;
//
// USB alternate setting
//
typedef struct {
EFI_USB_INTERFACE_DESCRIPTOR *Interface;
} USB_ALT_SETTING;
//
// Configuration descriptor
//
typedef struct {
UINT8 Length;
UINT8 DescriptorType;
UINT16 TotalLength;
UINT8 NumInterfaces;
UINT8 ConfigurationValue;
UINT8 Configuration;
UINT8 Attributes;
UINT8 MaxPower;
} EFI_USB_CONFIG_DESCRIPTOR;
//
// Supported String Languages
//
typedef struct {
UINT8 Length;
UINT8 DescriptorType;
UINT16 SupportedLanID[1];
} EFI_USB_SUPPORTED_LANGUAGES;
//
// String descriptor
//
typedef struct {
UINT8 Length;
UINT8 DescriptorType;
CHAR16 String[1];
} EFI_USB_STRING_DESCRIPTOR;
//
// Hub descriptor
//
#define MAXBYTES 8
typedef struct {
UINT8 Length;
UINT8 DescriptorType;
UINT8 NbrPorts;
UINT8 HubCharacteristics[2];
UINT8 PwrOn2PwrGood;
UINT8 HubContrCurrent;
UINT8 Filler[MAXBYTES];
} EFI_USB_HUB_DESCRIPTOR;
typedef struct {
UINT16 PortStatus;
UINT16 PortChangeStatus;
} EFI_USB_PORT_STATUS;
//
// Constant value for Port Status & Port Change Status
//
#define USB_PORT_STAT_CONNECTION 0x0001
#define USB_PORT_STAT_ENABLE 0x0002
#define USB_PORT_STAT_SUSPEND 0x0004
#define USB_PORT_STAT_OVERCURRENT 0x0008
#define USB_PORT_STAT_RESET 0x0010
#define USB_PORT_STAT_POWER 0x0100
#define USB_PORT_STAT_LOW_SPEED 0x0200
#define USB_PORT_STAT_HIGH_SPEED 0x0400
#define USB_PORT_STAT_OWNER 0x0800
#define USB_PORT_STAT_C_CONNECTION 0x0001
#define USB_PORT_STAT_C_ENABLE 0x0002
#define USB_PORT_STAT_C_SUSPEND 0x0004
#define USB_PORT_STAT_C_OVERCURRENT 0x0008
#define USB_PORT_STAT_C_RESET 0x0010
//
// Used for set/clear port feature request
//
typedef enum {
EfiUsbPortEnable = 1,
EfiUsbPortSuspend = 2,
EfiUsbPortReset = 4,
EfiUsbPortPower = 8,
EfiUsbPortOwner = 13,
EfiUsbPortConnectChange = 16,
EfiUsbPortEnableChange = 17,
EfiUsbPortSuspendChange = 18,
EfiUsbPortOverCurrentChange = 19,
EfiUsbPortResetChange = 20
} EFI_USB_PORT_FEATURE;
#pragma pack()
#endif

View File

@@ -0,0 +1,550 @@
/** @file
Support for PCI 2.2 standard.
Copyright (c) 2006 - 2007, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name: pci22.h
**/
#ifndef _PCI22_H
#define _PCI22_H
#define PCI_MAX_SEGMENT 0
#define PCI_MAX_BUS 255
#define PCI_MAX_DEVICE 31
#define PCI_MAX_FUNC 7
//
// Command
//
#define PCI_VGA_PALETTE_SNOOP_DISABLED 0x20
#pragma pack(push, 1)
typedef struct {
UINT16 VendorId;
UINT16 DeviceId;
UINT16 Command;
UINT16 Status;
UINT8 RevisionID;
UINT8 ClassCode[3];
UINT8 CacheLineSize;
UINT8 LatencyTimer;
UINT8 HeaderType;
UINT8 BIST;
} PCI_DEVICE_INDEPENDENT_REGION;
typedef struct {
UINT32 Bar[6];
UINT32 CISPtr;
UINT16 SubsystemVendorID;
UINT16 SubsystemID;
UINT32 ExpansionRomBar;
UINT8 CapabilityPtr;
UINT8 Reserved1[3];
UINT32 Reserved2;
UINT8 InterruptLine;
UINT8 InterruptPin;
UINT8 MinGnt;
UINT8 MaxLat;
} PCI_DEVICE_HEADER_TYPE_REGION;
typedef struct {
PCI_DEVICE_INDEPENDENT_REGION Hdr;
PCI_DEVICE_HEADER_TYPE_REGION Device;
} PCI_TYPE00;
typedef struct {
UINT32 Bar[2];
UINT8 PrimaryBus;
UINT8 SecondaryBus;
UINT8 SubordinateBus;
UINT8 SecondaryLatencyTimer;
UINT8 IoBase;
UINT8 IoLimit;
UINT16 SecondaryStatus;
UINT16 MemoryBase;
UINT16 MemoryLimit;
UINT16 PrefetchableMemoryBase;
UINT16 PrefetchableMemoryLimit;
UINT32 PrefetchableBaseUpper32;
UINT32 PrefetchableLimitUpper32;
UINT16 IoBaseUpper16;
UINT16 IoLimitUpper16;
UINT8 CapabilityPtr;
UINT8 Reserved[3];
UINT32 ExpansionRomBAR;
UINT8 InterruptLine;
UINT8 InterruptPin;
UINT16 BridgeControl;
} PCI_BRIDGE_CONTROL_REGISTER;
typedef struct {
PCI_DEVICE_INDEPENDENT_REGION Hdr;
PCI_BRIDGE_CONTROL_REGISTER Bridge;
} PCI_TYPE01;
typedef union {
PCI_TYPE00 Device;
PCI_TYPE01 Bridge;
} PCI_TYPE_GENERIC;
typedef struct {
UINT32 CardBusSocketReg; // Cardus Socket/ExCA Base
// Address Register
//
UINT16 Reserved;
UINT16 SecondaryStatus; // Secondary Status
UINT8 PciBusNumber; // PCI Bus Number
UINT8 CardBusBusNumber; // CardBus Bus Number
UINT8 SubordinateBusNumber; // Subordinate Bus Number
UINT8 CardBusLatencyTimer; // CardBus Latency Timer
UINT32 MemoryBase0; // Memory Base Register 0
UINT32 MemoryLimit0; // Memory Limit Register 0
UINT32 MemoryBase1;
UINT32 MemoryLimit1;
UINT32 IoBase0;
UINT32 IoLimit0; // I/O Base Register 0
UINT32 IoBase1; // I/O Limit Register 0
UINT32 IoLimit1;
UINT8 InterruptLine; // Interrupt Line
UINT8 InterruptPin; // Interrupt Pin
UINT16 BridgeControl; // Bridge Control
} PCI_CARDBUS_CONTROL_REGISTER;
//
// Definitions of PCI class bytes and manipulation macros.
//
#define PCI_CLASS_OLD 0x00
#define PCI_CLASS_OLD_OTHER 0x00
#define PCI_CLASS_OLD_VGA 0x01
#define PCI_CLASS_MASS_STORAGE 0x01
#define PCI_CLASS_MASS_STORAGE_SCSI 0x00
#define PCI_CLASS_MASS_STORAGE_IDE 0x01 // obsolete
#define PCI_CLASS_IDE 0x01
#define PCI_CLASS_MASS_STORAGE_FLOPPY 0x02
#define PCI_CLASS_MASS_STORAGE_IPI 0x03
#define PCI_CLASS_MASS_STORAGE_RAID 0x04
#define PCI_CLASS_MASS_STORAGE_OTHER 0x80
#define PCI_CLASS_NETWORK 0x02
#define PCI_CLASS_NETWORK_ETHERNET 0x00
#define PCI_CLASS_ETHERNET 0x00 // obsolete
#define PCI_CLASS_NETWORK_TOKENRING 0x01
#define PCI_CLASS_NETWORK_FDDI 0x02
#define PCI_CLASS_NETWORK_ATM 0x03
#define PCI_CLASS_NETWORK_ISDN 0x04
#define PCI_CLASS_NETWORK_OTHER 0x80
#define PCI_CLASS_DISPLAY 0x03
#define PCI_CLASS_DISPLAY_CTRL 0x03 // obsolete
#define PCI_CLASS_DISPLAY_VGA 0x00
#define PCI_CLASS_VGA 0x00 // obsolete
#define PCI_CLASS_DISPLAY_XGA 0x01
#define PCI_CLASS_DISPLAY_3D 0x02
#define PCI_CLASS_DISPLAY_OTHER 0x80
#define PCI_CLASS_DISPLAY_GFX 0x80
#define PCI_CLASS_GFX 0x80 // obsolete
#define PCI_CLASS_BRIDGE 0x06
#define PCI_CLASS_BRIDGE_HOST 0x00
#define PCI_CLASS_BRIDGE_ISA 0x01
#define PCI_CLASS_ISA 0x01 // obsolete
#define PCI_CLASS_BRIDGE_EISA 0x02
#define PCI_CLASS_BRIDGE_MCA 0x03
#define PCI_CLASS_BRIDGE_P2P 0x04
#define PCI_CLASS_BRIDGE_PCMCIA 0x05
#define PCI_CLASS_BRIDGE_NUBUS 0x06
#define PCI_CLASS_BRIDGE_CARDBUS 0x07
#define PCI_CLASS_BRIDGE_RACEWAY 0x08
#define PCI_CLASS_BRIDGE_ISA_PDECODE 0x80
#define PCI_CLASS_ISA_POSITIVE_DECODE 0x80 // obsolete
#define PCI_CLASS_SCC 0x07 // Simple communications controllers
#define PCI_SUBCLASS_SERIAL 0x00
#define PCI_IF_GENERIC_XT 0x00
#define PCI_IF_16450 0x01
#define PCI_IF_16550 0x02
#define PCI_IF_16650 0x03
#define PCI_IF_16750 0x04
#define PCI_IF_16850 0x05
#define PCI_IF_16950 0x06
#define PCI_SUBCLASS_PARALLEL 0x01
#define PCI_IF_PARALLEL_PORT 0x00
#define PCI_IF_BI_DIR_PARALLEL_PORT 0x01
#define PCI_IF_ECP_PARALLEL_PORT 0x02
#define PCI_IF_1284_CONTROLLER 0x03
#define PCI_IF_1284_DEVICE 0xFE
#define PCI_SUBCLASS_MULTIPORT_SERIAL 0x02
#define PCI_SUBCLASS_MODEM 0x03
#define PCI_IF_GENERIC_MODEM 0x00
#define PCI_IF_16450_MODEM 0x01
#define PCI_IF_16550_MODEM 0x02
#define PCI_IF_16650_MODEM 0x03
#define PCI_IF_16750_MODEM 0x04
#define PCI_SUBCLASS_OTHER 0x80
#define PCI_CLASS_SYSTEM_PERIPHERAL 0x08
#define PCI_SUBCLASS_PIC 0x00
#define PCI_IF_8259_PIC 0x00
#define PCI_IF_ISA_PIC 0x01
#define PCI_IF_EISA_PIC 0x02
#define PCI_IF_APIC_CONTROLLER 0x10 // I/O APIC interrupt controller , 32 bye none-prefectable memory.
#define PCI_IF_APIC_CONTROLLER2 0x20
#define PCI_SUBCLASS_TIMER 0x02
#define PCI_IF_8254_TIMER 0x00
#define PCI_IF_ISA_TIMER 0x01
#define PCI_EISA_TIMER 0x02
#define PCI_SUBCLASS_RTC 0x03
#define PCI_IF_GENERIC_RTC 0x00
#define PCI_IF_ISA_RTC 0x00
#define PCI_SUBCLASS_PNP_CONTROLLER 0x04 // HotPlug Controller
#define PCI_CLASS_INPUT_DEVICE 0x09
#define PCI_SUBCLASS_KEYBOARD 0x00
#define PCI_SUBCLASS_PEN 0x01
#define PCI_SUBCLASS_MOUSE_CONTROLLER 0x02
#define PCI_SUBCLASS_SCAN_CONTROLLER 0x03
#define PCI_SUBCLASS_GAMEPORT 0x04
#define PCI_CLASS_DOCKING_STATION 0x0A
#define PCI_CLASS_PROCESSOR 0x0B
#define PCI_SUBCLASS_PROC_386 0x00
#define PCI_SUBCLASS_PROC_486 0x01
#define PCI_SUBCLASS_PROC_PENTIUM 0x02
#define PCI_SUBCLASS_PROC_ALPHA 0x10
#define PCI_SUBCLASS_PROC_POWERPC 0x20
#define PCI_SUBCLASS_PROC_MIPS 0x30
#define PCI_SUBCLASS_PROC_CO_PORC 0x40 // Co-Processor
#define PCI_CLASS_SERIAL 0x0C
#define PCI_CLASS_SERIAL_FIREWIRE 0x00
#define PCI_CLASS_SERIAL_ACCESS_BUS 0x01
#define PCI_CLASS_SERIAL_SSA 0x02
#define PCI_CLASS_SERIAL_USB 0x03
#define PCI_IF_EHCI 0x20
#define PCI_CLASS_SERIAL_FIBRECHANNEL 0x04
#define PCI_CLASS_SERIAL_SMB 0x05
#define PCI_CLASS_WIRELESS 0x0D
#define PCI_SUBCLASS_IRDA 0x00
#define PCI_SUBCLASS_IR 0x01
#define PCI_SUBCLASS_RF 0x02
#define PCI_CLASS_INTELLIGENT_IO 0x0E
#define PCI_CLASS_SATELLITE 0x0F
#define PCI_SUBCLASS_TV 0x01
#define PCI_SUBCLASS_AUDIO 0x02
#define PCI_SUBCLASS_VOICE 0x03
#define PCI_SUBCLASS_DATA 0x04
#define PCI_SECURITY_CONTROLLER 0x10 // Encryption and decryption controller
#define PCI_SUBCLASS_NET_COMPUT 0x00
#define PCI_SUBCLASS_ENTERTAINMENT 0x10
#define PCI_CLASS_DPIO 0x11
#define IS_CLASS1(_p, c) ((_p)->Hdr.ClassCode[2] == (c))
#define IS_CLASS2(_p, c, s) (IS_CLASS1 (_p, c) && ((_p)->Hdr.ClassCode[1] == (s)))
#define IS_CLASS3(_p, c, s, p) (IS_CLASS2 (_p, c, s) && ((_p)->Hdr.ClassCode[0] == (p)))
#define IS_PCI_DISPLAY(_p) IS_CLASS1 (_p, PCI_CLASS_DISPLAY)
#define IS_PCI_VGA(_p) IS_CLASS3 (_p, PCI_CLASS_DISPLAY, PCI_CLASS_DISPLAY_VGA, 0)
#define IS_PCI_8514(_p) IS_CLASS3 (_p, PCI_CLASS_DISPLAY, PCI_CLASS_DISPLAY_VGA, 1)
#define IS_PCI_GFX(_p) IS_CLASS3 (_p, PCI_CLASS_DISPLAY, PCI_CLASS_DISPLAY_GFX, 0)
#define IS_PCI_OLD(_p) IS_CLASS1 (_p, PCI_CLASS_OLD)
#define IS_PCI_OLD_VGA(_p) IS_CLASS2 (_p, PCI_CLASS_OLD, PCI_CLASS_OLD_VGA)
#define IS_PCI_IDE(_p) IS_CLASS2 (_p, PCI_CLASS_MASS_STORAGE, PCI_CLASS_MASS_STORAGE_IDE)
#define IS_PCI_SCSI(_p) IS_CLASS3 (_p, PCI_CLASS_MASS_STORAGE, PCI_CLASS_MASS_STORAGE_SCSI, 0)
#define IS_PCI_RAID(_p) IS_CLASS3 (_p, PCI_CLASS_MASS_STORAGE, PCI_CLASS_MASS_STORAGE_RAID, 0)
#define IS_PCI_LPC(_p) IS_CLASS3 (_p, PCI_CLASS_BRIDGE, PCI_CLASS_BRIDGE_ISA, 0)
#define IS_PCI_P2P(_p) IS_CLASS3 (_p, PCI_CLASS_BRIDGE, PCI_CLASS_BRIDGE_P2P, 0)
#define IS_PCI_P2P_SUB(_p) IS_CLASS3 (_p, PCI_CLASS_BRIDGE, PCI_CLASS_BRIDGE_P2P, 1)
#define IS_PCI_16550_SERIAL(_p) IS_CLASS3 (_p, PCI_CLASS_SCC, PCI_SUBCLASS_SERIAL, PCI_IF_16550)
#define IS_PCI_USB(_p) IS_CLASS2 (_p, PCI_CLASS_SERIAL, PCI_CLASS_SERIAL_USB)
#define HEADER_TYPE_DEVICE 0x00
#define HEADER_TYPE_PCI_TO_PCI_BRIDGE 0x01
#define HEADER_TYPE_CARDBUS_BRIDGE 0x02
#define HEADER_TYPE_MULTI_FUNCTION 0x80
#define HEADER_LAYOUT_CODE 0x7f
#define IS_PCI_BRIDGE(_p) (((_p)->Hdr.HeaderType & HEADER_LAYOUT_CODE) == (HEADER_TYPE_PCI_TO_PCI_BRIDGE))
#define IS_CARDBUS_BRIDGE(_p) (((_p)->Hdr.HeaderType & HEADER_LAYOUT_CODE) == (HEADER_TYPE_CARDBUS_BRIDGE))
#define IS_PCI_MULTI_FUNC(_p) ((_p)->Hdr.HeaderType & HEADER_TYPE_MULTI_FUNCTION)
#define PCI_DEVICE_ROMBAR 0x30
#define PCI_BRIDGE_ROMBAR 0x38
#define PCI_MAX_BAR 0x0006
#define PCI_MAX_CONFIG_OFFSET 0x0100
#define PCI_VENDOR_ID_OFFSET 0x00
#define PCI_DEVICE_ID_OFFSET 0x02
#define PCI_COMMAND_OFFSET 0x04
#define PCI_PRIMARY_STATUS_OFFSET 0x06
#define PCI_REVISION_ID_OFFSET 0x08
#define PCI_CLASSCODE_OFFSET 0x09
#define PCI_CACHELINE_SIZE_OFFSET 0x0C
#define PCI_LATENCY_TIMER_OFFSET 0x0D
#define PCI_HEADER_TYPE_OFFSET 0x0E
#define PCI_BIST_OFFSET 0x0F
#define PCI_BASE_ADDRESSREG_OFFSET 0x10
#define PCI_CARDBUS_CIS_OFFSET 0x28
#define PCI_SVID_OFFSET 0x2C // SubSystem Vendor id
#define PCI_SUBSYSTEM_VENDOR_ID_OFFSET 0x2C
#define PCI_SID_OFFSET 0x2E // SubSystem ID
#define PCI_SUBSYSTEM_ID_OFFSET 0x2E
#define PCI_EXPANSION_ROM_BASE 0x30
#define PCI_CAPBILITY_POINTER_OFFSET 0x34
#define PCI_INT_LINE_OFFSET 0x3C // Interrupt Line Register
#define PCI_INT_PIN_OFFSET 0x3D // Interrupt Pin Register
#define PCI_MAXGNT_OFFSET 0x3E // Max Grant Register
#define PCI_MAXLAT_OFFSET 0x3F // Max Latency Register
#define PCI_BRIDGE_CONTROL_REGISTER_OFFSET 0x3E
#define PCI_BRIDGE_STATUS_REGISTER_OFFSET 0x1E
#define PCI_BRIDGE_PRIMARY_BUS_REGISTER_OFFSET 0x18
#define PCI_BRIDGE_SECONDARY_BUS_REGISTER_OFFSET 0x19
#define PCI_BRIDGE_SUBORDINATE_BUS_REGISTER_OFFSET 0x1a
//
// Interrupt Line "Unknown" or "No connection" value defined for x86 based system
//
#define PCI_INT_LINE_UNKNOWN 0xFF
typedef union {
struct {
UINT32 Reg : 8;
UINT32 Func : 3;
UINT32 Dev : 5;
UINT32 Bus : 8;
UINT32 Reserved : 7;
UINT32 Enable : 1;
} Bits;
UINT32 Uint32;
} PCI_CONFIG_ACCESS_CF8;
#pragma pack()
#define PCI_EXPANSION_ROM_HEADER_SIGNATURE 0xaa55
#define PCI_DATA_STRUCTURE_SIGNATURE EFI_SIGNATURE_32 ('P', 'C', 'I', 'R')
#define PCI_CODE_TYPE_PCAT_IMAGE 0x00
#define PCI_CODE_TYPE_EFI_IMAGE 0x03
#define EFI_PCI_EXPANSION_ROM_HEADER_COMPRESSED 0x0001
#define EFI_PCI_COMMAND_IO_SPACE 0x0001
#define EFI_PCI_COMMAND_MEMORY_SPACE 0x0002
#define EFI_PCI_COMMAND_BUS_MASTER 0x0004
#define EFI_PCI_COMMAND_SPECIAL_CYCLE 0x0008
#define EFI_PCI_COMMAND_MEMORY_WRITE_AND_INVALIDATE 0x0010
#define EFI_PCI_COMMAND_VGA_PALETTE_SNOOP 0x0020
#define EFI_PCI_COMMAND_PARITY_ERROR_RESPOND 0x0040
#define EFI_PCI_COMMAND_STEPPING_CONTROL 0x0080
#define EFI_PCI_COMMAND_SERR 0x0100
#define EFI_PCI_COMMAND_FAST_BACK_TO_BACK 0x0200
#define EFI_PCI_BRIDGE_CONTROL_PARITY_ERROR_RESPONSE 0x0001
#define EFI_PCI_BRIDGE_CONTROL_SERR 0x0002
#define EFI_PCI_BRIDGE_CONTROL_ISA 0x0004
#define EFI_PCI_BRIDGE_CONTROL_VGA 0x0008
#define EFI_PCI_BRIDGE_CONTROL_VGA_16 0x0010
#define EFI_PCI_BRIDGE_CONTROL_MASTER_ABORT 0x0020
#define EFI_PCI_BRIDGE_CONTROL_RESET_SECONDARY_BUS 0x0040
#define EFI_PCI_BRIDGE_CONTROL_FAST_BACK_TO_BACK 0x0080
#define EFI_PCI_BRIDGE_CONTROL_PRIMARY_DISCARD_TIMER 0x0100
#define EFI_PCI_BRIDGE_CONTROL_SECONDARY_DISCARD_TIMER 0x0200
#define EFI_PCI_BRIDGE_CONTROL_TIMER_STATUS 0x0400
#define EFI_PCI_BRIDGE_CONTROL_DISCARD_TIMER_SERR 0x0800
//
// Following are the PCI-CARDBUS bridge control bit
//
#define EFI_PCI_BRIDGE_CONTROL_IREQINT_ENABLE 0x0080
#define EFI_PCI_BRIDGE_CONTROL_RANGE0_MEMORY_TYPE 0x0100
#define EFI_PCI_BRIDGE_CONTROL_RANGE1_MEMORY_TYPE 0x0200
#define EFI_PCI_BRIDGE_CONTROL_WRITE_POSTING_ENABLE 0x0400
//
// Following are the PCI status control bit
//
#define EFI_PCI_STATUS_CAPABILITY 0x0010
#define EFI_PCI_STATUS_66MZ_CAPABLE 0x0020
#define EFI_PCI_FAST_BACK_TO_BACK_CAPABLE 0x0080
#define EFI_PCI_MASTER_DATA_PARITY_ERROR 0x0100
#define EFI_PCI_CAPABILITY_PTR 0x34
#define EFI_PCI_CARDBUS_BRIDGE_CAPABILITY_PTR 0x14
#pragma pack(1)
typedef struct {
UINT16 Signature; // 0xaa55
UINT8 Reserved[0x16];
UINT16 PcirOffset;
} PCI_EXPANSION_ROM_HEADER;
typedef struct {
UINT16 Signature; // 0xaa55
UINT8 Size512;
UINT8 InitEntryPoint[3];
UINT8 Reserved[0x12];
UINT16 PcirOffset;
} EFI_LEGACY_EXPANSION_ROM_HEADER;
typedef struct {
UINT32 Signature; // "PCIR"
UINT16 VendorId;
UINT16 DeviceId;
UINT16 Reserved0;
UINT16 Length;
UINT8 Revision;
UINT8 ClassCode[3];
UINT16 ImageLength;
UINT16 CodeRevision;
UINT8 CodeType;
UINT8 Indicator;
UINT16 Reserved1;
} PCI_DATA_STRUCTURE;
//
// PCI Capability List IDs and records
//
#define EFI_PCI_CAPABILITY_ID_PMI 0x01
#define EFI_PCI_CAPABILITY_ID_AGP 0x02
#define EFI_PCI_CAPABILITY_ID_VPD 0x03
#define EFI_PCI_CAPABILITY_ID_SLOTID 0x04
#define EFI_PCI_CAPABILITY_ID_MSI 0x05
#define EFI_PCI_CAPABILITY_ID_HOTPLUG 0x06
#define EFI_PCI_CAPABILITY_ID_PCIX 0x07
typedef struct {
UINT8 CapabilityID;
UINT8 NextItemPtr;
} EFI_PCI_CAPABILITY_HDR;
//
// Capability EFI_PCI_CAPABILITY_ID_PMI
//
typedef struct {
EFI_PCI_CAPABILITY_HDR Hdr;
UINT16 PMC;
UINT16 PMCSR;
UINT8 BridgeExtention;
UINT8 Data;
} EFI_PCI_CAPABILITY_PMI;
//
// Capability EFI_PCI_CAPABILITY_ID_AGP
//
typedef struct {
EFI_PCI_CAPABILITY_HDR Hdr;
UINT8 Rev;
UINT8 Reserved;
UINT32 Status;
UINT32 Command;
} EFI_PCI_CAPABILITY_AGP;
//
// Capability EFI_PCI_CAPABILITY_ID_VPD
//
typedef struct {
EFI_PCI_CAPABILITY_HDR Hdr;
UINT16 AddrReg;
UINT32 DataReg;
} EFI_PCI_CAPABILITY_VPD;
//
// Capability EFI_PCI_CAPABILITY_ID_SLOTID
//
typedef struct {
EFI_PCI_CAPABILITY_HDR Hdr;
UINT8 ExpnsSlotReg;
UINT8 ChassisNo;
} EFI_PCI_CAPABILITY_SLOTID;
//
// Capability EFI_PCI_CAPABILITY_ID_MSI
//
typedef struct {
EFI_PCI_CAPABILITY_HDR Hdr;
UINT16 MsgCtrlReg;
UINT32 MsgAddrReg;
UINT16 MsgDataReg;
} EFI_PCI_CAPABILITY_MSI32;
typedef struct {
EFI_PCI_CAPABILITY_HDR Hdr;
UINT16 MsgCtrlReg;
UINT32 MsgAddrRegLsdw;
UINT32 MsgAddrRegMsdw;
UINT16 MsgDataReg;
} EFI_PCI_CAPABILITY_MSI64;
//
// Capability EFI_PCI_CAPABILITY_ID_HOTPLUG
//
typedef struct {
EFI_PCI_CAPABILITY_HDR Hdr;
//
// not finished - fields need to go here
//
} EFI_PCI_CAPABILITY_HOTPLUG;
//
// Capability EFI_PCI_CAPABILITY_ID_PCIX
//
typedef struct {
EFI_PCI_CAPABILITY_HDR Hdr;
UINT16 CommandReg;
UINT32 StatusReg;
} EFI_PCI_CAPABILITY_PCIX;
typedef struct {
EFI_PCI_CAPABILITY_HDR Hdr;
UINT16 SecStatusReg;
UINT32 StatusReg;
UINT32 SplitTransCtrlRegUp;
UINT32 SplitTransCtrlRegDn;
} EFI_PCI_CAPABILITY_PCIX_BRDG;
#define DEVICE_ID_NOCARE 0xFFFF
#define PCI_ACPI_UNUSED 0
#define PCI_BAR_NOCHANGE 0
#define PCI_BAR_OLD_ALIGN 0xFFFFFFFFFFFFFFFFULL
#define PCI_BAR_EVEN_ALIGN 0xFFFFFFFFFFFFFFFEULL
#define PCI_BAR_SQUAD_ALIGN 0xFFFFFFFFFFFFFFFDULL
#define PCI_BAR_DQUAD_ALIGN 0xFFFFFFFFFFFFFFFCULL
#define PCI_BAR_IDX0 0x00
#define PCI_BAR_IDX1 0x01
#define PCI_BAR_IDX2 0x02
#define PCI_BAR_IDX3 0x03
#define PCI_BAR_IDX4 0x04
#define PCI_BAR_IDX5 0x05
#define PCI_BAR_ALL 0xFF
#pragma pack(pop)
//
// NOTE: The following header files are included here for
// compatibility consideration.
//
#include "pci23.h"
#include "pci30.h"
#include "EfiPci.h"
#endif

View File

@@ -0,0 +1,25 @@
/** @file
Support for PCI 2.3 standard.
Copyright (c) 2006, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name: pci23.h
**/
#ifndef _PCI23_H
#define _PCI23_H
//#include "pci22.h"
#define PCI_EXP_MAX_CONFIG_OFFSET 0x1000
#define EFI_PCI_CAPABILITY_ID_PCIEXP 0x10
#endif

View File

@@ -0,0 +1,45 @@
/** @file
Support for PCI 3.0 standard.
Copyright (c) 2006, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name: pci30.h
**/
#ifndef _PCI30_H
#define _PCI30_H
//#include "pci23.h"
#define PCI_CLASS_MASS_STORAGE_SATADPA 0x06
#pragma pack(push, 1)
typedef struct {
UINT32 Signature; // "PCIR"
UINT16 VendorId;
UINT16 DeviceId;
UINT16 DeviceListOffset;
UINT16 Length;
UINT8 Revision;
UINT8 ClassCode[3];
UINT16 ImageLength;
UINT16 CodeRevision;
UINT8 CodeType;
UINT8 Indicator;
UINT16 MaxRuntimeImageLength;
UINT16 ConfigUtilityCodeHeaderOffset;
UINT16 DMTFCLPEntryPointOffset;
} PCI_3_0_DATA_STRUCTURE;
#pragma pack(pop)
#endif

View File

@@ -0,0 +1,282 @@
/** @file
support for SCSI-2 standard
Copyright (c) 2006, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name: scsi.h
**/
#ifndef _SCSI_H
#define _SCSI_H
//
// SCSI command OP Code
//
//
// Commands for all device types
//
#define EFI_SCSI_OP_CHANGE_DEFINITION 0x40
#define EFI_SCSI_OP_COMPARE 0x39
#define EFI_SCSI_OP_COPY 0x18
#define EFI_SCSI_OP_COPY_VERIFY 0x3a
#define EFI_SCSI_OP_INQUIRY 0x12
#define EFI_SCSI_OP_LOG_SELECT 0x4c
#define EFI_SCSI_OP_LOG_SENSE 0x4d
#define EFI_SCSI_OP_MODE_SEL6 0x15
#define EFI_SCSI_OP_MODE_SEL10 0x55
#define EFI_SCSI_OP_MODE_SEN6 0x1a
#define EFI_SCSI_OP_MODE_SEN10 0x5a
#define EFI_SCSI_OP_READ_BUFFER 0x3c
#define EFI_SCSI_OP_REQUEST_SENSE 0x03
#define EFI_SCSI_OP_SEND_DIAG 0x1d
#define EFI_SCSI_OP_TEST_UNIT_READY 0x00
#define EFI_SCSI_OP_WRITE_BUFF 0x3b
//
// Commands unique to Direct Access Devices
//
#define EFI_SCSI_OP_COMPARE 0x39
#define EFI_SCSI_OP_FORMAT 0x04
#define EFI_SCSI_OP_LOCK_UN_CACHE 0x36
#define EFI_SCSI_OP_PREFETCH 0x34
#define EFI_SCSI_OP_MEDIA_REMOVAL 0x1e
#define EFI_SCSI_OP_READ6 0x08
#define EFI_SCSI_OP_READ10 0x28
#define EFI_SCSI_OP_READ_CAPACITY 0x25
#define EFI_SCSI_OP_READ_DEFECT 0x37
#define EFI_SCSI_OP_READ_LONG 0x3e
#define EFI_SCSI_OP_REASSIGN_BLK 0x07
#define EFI_SCSI_OP_RECEIVE_DIAG 0x1c
#define EFI_SCSI_OP_RELEASE 0x17
#define EFI_SCSI_OP_REZERO 0x01
#define EFI_SCSI_OP_SEARCH_DATA_E 0x31
#define EFI_SCSI_OP_SEARCH_DATA_H 0x30
#define EFI_SCSI_OP_SEARCH_DATA_L 0x32
#define EFI_SCSI_OP_SEEK6 0x0b
#define EFI_SCSI_OP_SEEK10 0x2b
#define EFI_SCSI_OP_SEND_DIAG 0x1d
#define EFI_SCSI_OP_SET_LIMIT 0x33
#define EFI_SCSI_OP_START_STOP_UNIT 0x1b
#define EFI_SCSI_OP_SYNC_CACHE 0x35
#define EFI_SCSI_OP_VERIFY 0x2f
#define EFI_SCSI_OP_WRITE6 0x0a
#define EFI_SCSI_OP_WRITE10 0x2a
#define EFI_SCSI_OP_WRITE_VERIFY 0x2e
#define EFI_SCSI_OP_WRITE_LONG 0x3f
#define EFI_SCSI_OP_WRITE_SAME 0x41
//
// Commands unique to Sequential Access Devices
//
#define EFI_SCSI_OP_ERASE 0x19
#define EFI_SCSI_OP_LOAD_UNLOAD 0x1b
#define EFI_SCSI_OP_LOCATE 0x2b
#define EFI_SCSI_OP_READ_BLOCK_LIMIT 0x05
#define EFI_SCSI_OP_READ_POS 0x34
#define EFI_SCSI_OP_READ_REVERSE 0x0f
#define EFI_SCSI_OP_RECOVER_BUF_DATA 0x14
#define EFI_SCSI_OP_RESERVE_UNIT 0x16
#define EFI_SCSI_OP_REWIND 0x01
#define EFI_SCSI_OP_SPACE 0x11
#define EFI_SCSI_OP_VERIFY_TAPE 0x13
#define EFI_SCSI_OP_WRITE_FILEMARK 0x10
//
// Commands unique to Printer Devices
//
#define EFI_SCSI_OP_PRINT 0x0a
#define EFI_SCSI_OP_SLEW_PRINT 0x0b
#define EFI_SCSI_OP_STOP_PRINT 0x1b
#define EFI_SCSI_OP_SYNC_BUFF 0x10
//
// Commands unique to Processor Devices
//
#define EFI_SCSI_OP_RECEIVE 0x08
#define EFI_SCSI_OP_SEND 0x0a
//
// Commands unique to Write-Once Devices
//
#define EFI_SCSI_OP_MEDIUM_SCAN 0x38
#define EFI_SCSI_OP_SEARCH_DAT_E10 0x31
#define EFI_SCSI_OP_SEARCH_DAT_E12 0xb1
#define EFI_SCSI_OP_SEARCH_DAT_H10 0x30
#define EFI_SCSI_OP_SEARCH_DAT_H12 0xb0
#define EFI_SCSI_OP_SEARCH_DAT_L10 0x32
#define EFI_SCSI_OP_SEARCH_DAT_L12 0xb2
#define EFI_SCSI_OP_SET_LIMIT10 0x33
#define EFI_SCSI_OP_SET_LIMIT12 0xb3
#define EFI_SCSI_OP_VERIFY10 0x2f
#define EFI_SCSI_OP_VERIFY12 0xaf
#define EFI_SCSI_OP_WRITE12 0xaa
#define EFI_SCSI_OP_WRITE_VERIFY10 0x2e
#define EFI_SCSI_OP_WRITE_VERIFY12 0xae
//
// Commands unique to CD-ROM Devices
//
#define EFI_SCSI_OP_PLAY_AUD_10 0x45
#define EFI_SCSI_OP_PLAY_AUD_12 0xa5
#define EFI_SCSI_OP_PLAY_AUD_MSF 0x47
#define EFI_SCSI_OP_PLAY_AUD_TKIN 0x48
#define EFI_SCSI_OP_PLAY_TK_REL10 0x49
#define EFI_SCSI_OP_PLAY_TK_REL12 0xa9
#define EFI_SCSI_OP_READ_CD_CAPACITY 0x25
#define EFI_SCSI_OP_READ_HEADER 0x44
#define EFI_SCSI_OP_READ_SUB_CHANNEL 0x42
#define EFI_SCSI_OP_READ_TOC 0x43
//
// Commands unique to Scanner Devices
//
#define EFI_SCSI_OP_GET_DATABUFF_STAT 0x34
#define EFI_SCSI_OP_GET_WINDOW 0x25
#define EFI_SCSI_OP_OBJECT_POS 0x31
#define EFI_SCSI_OP_SCAN 0x1b
#define EFI_SCSI_OP_SET_WINDOW 0x24
//
// Commands unique to Optical Memory Devices
//
#define EFI_SCSI_OP_UPDATE_BLOCK 0x3d
//
// Commands unique to Medium Changer Devices
//
#define EFI_SCSI_OP_EXCHANGE_MEDIUM 0xa6
#define EFI_SCSI_OP_INIT_ELEMENT_STAT 0x07
#define EFI_SCSI_OP_POS_TO_ELEMENT 0x2b
#define EFI_SCSI_OP_REQUEST_VE_ADDR 0xb5
#define EFI_SCSI_OP_SEND_VOL_TAG 0xb6
//
// Commands unique to Communition Devices
//
#define EFI_SCSI_OP_GET_MESSAGE6 0x08
#define EFI_SCSI_OP_GET_MESSAGE10 0x28
#define EFI_SCSI_OP_GET_MESSAGE12 0xa8
#define EFI_SCSI_OP_SEND_MESSAGE6 0x0a
#define EFI_SCSI_OP_SEND_MESSAGE10 0x2a
#define EFI_SCSI_OP_SEND_MESSAGE12 0xaa
//
// SCSI Data Transfer Direction
//
#define EFI_SCSI_DATA_IN 0
#define EFI_SCSI_DATA_OUT 1
//
// Peripheral Device Type Definitions
//
#define EFI_SCSI_TYPE_DISK 0x00 // Disk device
#define EFI_SCSI_TYPE_TAPE 0x01 // Tape device
#define EFI_SCSI_TYPE_PRINTER 0x02 // Printer
#define EFI_SCSI_TYPE_PROCESSOR 0x03 // Processor
#define EFI_SCSI_TYPE_WORM 0x04 // Write-once read-multiple
#define EFI_SCSI_TYPE_CDROM 0x05 // CD-ROM device
#define EFI_SCSI_TYPE_SCANNER 0x06 // Scanner device
#define EFI_SCSI_TYPE_OPTICAL 0x07 // Optical memory device
#define EFI_SCSI_TYPE_MEDIUMCHANGER 0x08 // Medium Changer device
#define EFI_SCSI_TYPE_COMMUNICATION 0x09 // Communications device
#define EFI_SCSI_TYPE_RESERVED_LOW 0x0A // Reserved (low)
#define EFI_SCSI_TYPE_RESERVED_HIGH 0x1E // Reserved (high)
#define EFI_SCSI_TYPE_UNKNOWN 0x1F // Unknown or no device type
#pragma pack(1)
//
// Data structures for scsi command use
//
typedef struct {
UINT8 Peripheral_Type : 5;
UINT8 Peripheral_Qualifier : 3;
UINT8 DeviceType_Modifier : 7;
UINT8 RMB : 1;
UINT8 Version;
UINT8 Response_Data_Format;
UINT8 Addnl_Length;
UINT8 Reserved_5_95[95 - 5 + 1];
} EFI_SCSI_INQUIRY_DATA;
typedef struct {
UINT8 Error_Code : 7;
UINT8 Valid : 1;
UINT8 Segment_Number;
UINT8 Sense_Key : 4;
UINT8 Reserved_21 : 1;
UINT8 ILI : 1;
UINT8 Reserved_22 : 2;
UINT8 Information_3_6[4];
UINT8 Addnl_Sense_Length; // n - 7
UINT8 Vendor_Specific_8_11[4];
UINT8 Addnl_Sense_Code; // mandatory
UINT8 Addnl_Sense_Code_Qualifier; // mandatory
UINT8 Field_Replaceable_Unit_Code; // optional
UINT8 Reserved_15_17[3];
} EFI_SCSI_SENSE_DATA;
typedef struct {
UINT8 LastLba3;
UINT8 LastLba2;
UINT8 LastLba1;
UINT8 LastLba0;
UINT8 BlockSize3;
UINT8 BlockSize2;
UINT8 BlockSize1;
UINT8 BlockSize0;
} EFI_SCSI_DISK_CAPACITY_DATA;
#pragma pack()
//
// Sense Key
//
#define EFI_SCSI_REQUEST_SENSE_ERROR (0x70)
#define EFI_SCSI_SK_NO_SENSE (0x0)
#define EFI_SCSI_SK_RECOVERY_ERROR (0x1)
#define EFI_SCSI_SK_NOT_READY (0x2)
#define EFI_SCSI_SK_MEDIUM_ERROR (0x3)
#define EFI_SCSI_SK_HARDWARE_ERROR (0x4)
#define EFI_SCSI_SK_ILLEGAL_REQUEST (0x5)
#define EFI_SCSI_SK_UNIT_ATTENTION (0x6)
#define EFI_SCSI_SK_DATA_PROTECT (0x7)
#define EFI_SCSI_SK_BLANK_CHECK (0x8)
#define EFI_SCSI_SK_VENDOR_SPECIFIC (0x9)
#define EFI_SCSI_SK_RESERVED_A (0xA)
#define EFI_SCSI_SK_ABORT (0xB)
#define EFI_SCSI_SK_RESERVED_C (0xC)
#define EFI_SCSI_SK_OVERFLOW (0xD)
#define EFI_SCSI_SK_MISCOMPARE (0xE)
#define EFI_SCSI_SK_RESERVED_F (0xF)
//
// Additional Sense Codes
//
#define EFI_SCSI_ASC_NOT_READY (0x04)
#define EFI_SCSI_ASC_MEDIA_ERR1 (0x10)
#define EFI_SCSI_ASC_MEDIA_ERR2 (0x11)
#define EFI_SCSI_ASC_MEDIA_ERR3 (0x14)
#define EFI_SCSI_ASC_MEDIA_ERR4 (0x30)
#define EFI_SCSI_ASC_MEDIA_UPSIDE_DOWN (0x06)
#define EFI_SCSI_ASC_INVALID_CMD (0x20)
#define EFI_SCSI_ASC_LBA_OUT_OF_RANGE (0x21)
#define EFI_SCSI_ASC_INVALID_FIELD (0x24)
#define EFI_SCSI_ASC_WRITE_PROTECTED (0x27)
#define EFI_SCSI_ASC_MEDIA_CHANGE (0x28)
#define EFI_SCSI_ASC_RESET (0x29) /* Power On Reset or Bus Reset occurred */
#define EFI_SCSI_ASC_ILLEGAL_FIELD (0x26)
#define EFI_SCSI_ASC_NO_MEDIA (0x3A)
#define EFI_SCSI_ASC_ILLEGAL_MODE_FOR_THIS_TRACK (0x64)
//
// Additional Sense Code Qualifier
//
#define EFI_SCSI_ASCQ_IN_PROGRESS (0x01)
#endif