Add a PE/COFF extra action lib that DEBUG prints the debugger command to load symbols. Turn off DXE Core DEBUG print on load and use this new library in its place.

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10373 6f19259b-4bc3-4df7-8a09-765794883524
This commit is contained in:
andrewfish
2010-04-14 21:52:26 +00:00
parent 9e4f210c32
commit 5b792f1abf
6 changed files with 187 additions and 109 deletions

View File

@@ -22,6 +22,7 @@
#include <Library/OmapLib.h>
#include <Library/ArmLib.h>
#include <Library/PeCoffGetEntryPointLib.h>
#include <Library/DebugAgentLib.h>
#include <Ppi/GuidedSectionExtraction.h>
#include <Guid/LzmaDecompress.h>
@@ -29,17 +30,6 @@
#include "LzmaDecompress.h"
VOID
EFIAPI
_ModuleEntryPoint(
VOID
);
CHAR8 *
DeCygwinPathIfNeeded (
IN CHAR8 *Name
);
VOID
PadConfiguration (
VOID
@@ -50,6 +40,7 @@ ClockInit (
VOID
);
VOID
TimerInit (
VOID
@@ -59,8 +50,7 @@ TimerInit (
UINT32 TimerBaseAddress = TimerBase(Timer);
// Set source clock for GPT3 & GPT4 to SYS_CLK
MmioOr32(CM_CLKSEL_PER, CM_CLKSEL_PER_CLKSEL_GPT3_SYS
| CM_CLKSEL_PER_CLKSEL_GPT4_SYS);
MmioOr32 (CM_CLKSEL_PER, CM_CLKSEL_PER_CLKSEL_GPT3_SYS | CM_CLKSEL_PER_CLKSEL_GPT4_SYS);
// Set count & reload registers
MmioWrite32 (TimerBaseAddress + GPTIMER_TCRR, 0x00000000);
@@ -127,52 +117,6 @@ LzmaDecompressLibConstructor (
VOID
);
/**
If the build is done on cygwin the paths are cygpaths.
/cygdrive/c/tmp.txt vs c:\tmp.txt so we need to convert
them to work with RVD commands
This is just code to help print out RVD symbol load command.
If you build with cygwin paths aren't compatible with RVD.
@param Name Path to convert if needed
**/
CHAR8 *
SecDeCygwinPathIfNeeded (
IN CHAR8 *Name
)
{
CHAR8 *Ptr;
UINTN Index;
UINTN Len;
Ptr = AsciiStrStr (Name, "/cygdrive/");
if (Ptr == NULL) {
return Name;
}
Len = AsciiStrLen (Ptr);
// convert "/cygdrive" to spaces
for (Index = 0; Index < 9; Index++) {
Ptr[Index] = ' ';
}
// convert /c to c:
Ptr[9] = Ptr[10];
Ptr[10] = ':';
// switch path seperators
for (Index = 11; Index < Len; Index++) {
if (Ptr[Index] == '/') {
Ptr[Index] = '\\' ;
}
}
return Name;
}
VOID
CEntryPoint (
@@ -209,53 +153,12 @@ CEntryPoint (
// Start talking
UartInit ();
InitializeDebugAgent (DEBUG_AGENT_INIT_PREMEM_SEC, NULL);
SaveAndSetDebugTimerInterrupt (TRUE);
DEBUG ((EFI_D_ERROR, "UART Enabled\n"));
DEBUG_CODE_BEGIN ();
//
// On a debug build print out information about the SEC. This is really info about
// the PE/COFF file we are currently running from. Useful for loading symbols in a
// debugger. Remember our image is really part of the FV.
//
RETURN_STATUS Status;
EFI_PEI_FV_HANDLE VolumeHandle;
EFI_PEI_FILE_HANDLE FileHandle;
VOID *PeCoffImage;
UINT32 Offset;
CHAR8 *FilePath;
FfsAnyFvFindFirstFile (EFI_FV_FILETYPE_SECURITY_CORE, &VolumeHandle, &FileHandle);
Status = FfsFindSectionData (EFI_SECTION_TE, FileHandle, &PeCoffImage);
if (EFI_ERROR (Status)) {
// Usually is a TE (PI striped down PE/COFF), but could be a full PE/COFF
Status = FfsFindSectionData (EFI_SECTION_PE32, FileHandle, &PeCoffImage);
}
if (!EFI_ERROR (Status)) {
Offset = PeCoffGetSizeOfHeaders (PeCoffImage);
FilePath = PeCoffLoaderGetPdbPointer (PeCoffImage);
if (FilePath != NULL) {
//
// In general you should never have to use #ifdef __CC_ARM in the code. It
// is hidden in the away in the MdePkg. But here we would like to print differnt things
// for different toolchains.
//
#ifdef __CC_ARM
// Print out the command for the RVD debugger to load symbols for this image
DEBUG ((EFI_D_ERROR, "load /a /ni /np %a &0x%08x\n", SecDeCygwinPathIfNeeded (FilePath), (CHAR8 *)PeCoffImage + Offset));
#elif __GNUC__
// This may not work correctly if you generate PE/COFF directlyas then the Offset would not be required
DEBUG ((EFI_D_ERROR, "add-symbol-file %a 0x%08x\n", FilePath, PeCoffImage + Offset));
#else
DEBUG ((EFI_D_ERROR, "SEC starts at 0x%08x with an entry point at 0x%08x %a\n", PeCoffImage, _ModuleEntryPoint, FilePath));
#endif
}
}
DEBUG_CODE_END ();
// Start up a free running time so that the timer lib will work
TimerInit ();