ArmPkg: Move ARM Platform drivers from ArmPkg/Drivers/ to ArmPlatformPkg/Drivers/

The idea is to keep ArmPkg responsible for the ARM architectural modules and ArmPlatformPkg
the ARM development platform packages (with their respective drivers).


ArmPlatformPkg: Reduce driver dependency on ArmPlatform.h

- Move some driver definitions from C-Macro to PCD values
- Unify PCD driver namespace




git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11956 6f19259b-4bc3-4df7-8a09-765794883524
This commit is contained in:
oliviermartin
2011-07-01 15:30:01 +00:00
parent 7fb54d9d04
commit 5cc45b70c3
64 changed files with 389 additions and 2067 deletions

View File

@@ -28,7 +28,10 @@
#include <Protocol/HardwareInterrupt.h>
#include <Drivers/SP804Timer.h>
#include <ArmPlatform.h>
#define SP804_TIMER_PERIODIC_BASE (UINTN)PcdGet32 (PcdSP804TimerPeriodicBase)
#define SP804_TIMER_METRONOME_BASE (UINTN)PcdGet32 (PcdSP804TimerMetronomeBase)
#define SP804_TIMER_PERFORMANCE_BASE (UINTN)PcdGet32 (PcdSP804TimerPerformanceBase)
// The notification function to call on every timer interrupt.
volatile EFI_TIMER_NOTIFY mTimerNotifyFunction = (EFI_TIMER_NOTIFY)NULL;
@@ -43,7 +46,6 @@ EFI_HARDWARE_INTERRUPT_PROTOCOL *gInterrupt = NULL;
// Cached interrupt vector
UINTN gVector;
UINT32 mLastTickCount;
/**
@@ -75,9 +77,9 @@ TimerInterruptHandler (
OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL);
// If the interrupt is shared then we must check if this interrupt source is the one associated to this Timer
if (MmioRead32 (SP804_TIMER0_BASE + SP804_TIMER_MSK_INT_STS_REG) != 0) {
if (MmioRead32 (SP804_TIMER_PERIODIC_BASE + SP804_TIMER_MSK_INT_STS_REG) != 0) {
// clear the periodic interrupt
MmioWrite32 (SP804_TIMER0_BASE + SP804_TIMER_INT_CLR_REG, 0);
MmioWrite32 (SP804_TIMER_PERIODIC_BASE + SP804_TIMER_INT_CLR_REG, 0);
// signal end of interrupt early to help avoid losing subsequent ticks from long duration handlers
gInterrupt->EndOfInterrupt (gInterrupt, Source);
@@ -139,7 +141,7 @@ TimerDriverRegisterHandler (
}
/**
Make sure all ArrmVe Timers are disabled
Make sure all Dual Timers are disabled
**/
VOID
EFIAPI
@@ -148,25 +150,20 @@ ExitBootServicesEvent (
IN VOID *Context
)
{
// Disable timer 0 if enabled
if (MmioRead32(SP804_TIMER0_BASE + SP804_TIMER_CONTROL_REG) & SP804_TIMER_CTRL_ENABLE) {
MmioAnd32 (SP804_TIMER0_BASE + SP804_TIMER_CONTROL_REG, 0);
}
// Disable 'Periodic Operation' timer if enabled
if (MmioRead32(SP804_TIMER_PERIODIC_BASE + SP804_TIMER_CONTROL_REG) & SP804_TIMER_CTRL_ENABLE) {
MmioAnd32 (SP804_TIMER_PERIODIC_BASE + SP804_TIMER_CONTROL_REG, 0);
}
// Disable timer 1 if enabled
if (MmioRead32(SP804_TIMER1_BASE + SP804_TIMER_CONTROL_REG) & SP804_TIMER_CTRL_ENABLE) {
MmioAnd32 (SP804_TIMER1_BASE + SP804_TIMER_CONTROL_REG, 0);
}
// Disable 'Metronome/Delay' timer if enabled
if (MmioRead32(SP804_TIMER_METRONOME_BASE + SP804_TIMER_CONTROL_REG) & SP804_TIMER_CTRL_ENABLE) {
MmioAnd32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CONTROL_REG, 0);
}
// Disable timer 2 if enabled
if (MmioRead32(SP804_TIMER2_BASE + SP804_TIMER_CONTROL_REG) & SP804_TIMER_CTRL_ENABLE) {
MmioAnd32 (SP804_TIMER2_BASE + SP804_TIMER_CONTROL_REG, 0);
}
// Disable timer 3 if enabled
if (MmioRead32(SP804_TIMER3_BASE + SP804_TIMER_CONTROL_REG) & SP804_TIMER_CTRL_ENABLE) {
MmioAnd32 (SP804_TIMER3_BASE + SP804_TIMER_CONTROL_REG, 0);
}
// Disable 'Performance' timer if enabled
if (MmioRead32(SP804_TIMER_PERFORMANCE_BASE + SP804_TIMER_CONTROL_REG) & SP804_TIMER_CTRL_ENABLE) {
MmioAnd32 (SP804_TIMER_PERFORMANCE_BASE + SP804_TIMER_CONTROL_REG, 0);
}
}
/**
@@ -208,7 +205,7 @@ TimerDriverSetTimerPeriod (
UINT64 TimerTicks;
// always disable the timer
MmioAnd32 (SP804_TIMER0_BASE + SP804_TIMER_CONTROL_REG, ~SP804_TIMER_CTRL_ENABLE);
MmioAnd32 (SP804_TIMER_PERIODIC_BASE + SP804_TIMER_CONTROL_REG, ~SP804_TIMER_CTRL_ENABLE);
if (TimerPeriod == 0) {
// Leave timer disabled from above, and...
@@ -218,7 +215,7 @@ TimerDriverSetTimerPeriod (
} else {
// Convert TimerPeriod into 1MHz clock counts (us units = 100ns units / 10)
TimerTicks = DivU64x32 (TimerPeriod, 10);
TimerTicks = MultU64x32 (TimerTicks, PcdGet32(PcdSP804FrequencyInMHz));
TimerTicks = MultU64x32 (TimerTicks, PcdGet32(PcdSP804TimerFrequencyInMHz));
// if it's larger than 32-bits, pin to highest value
if (TimerTicks > 0xffffffff) {
@@ -228,10 +225,10 @@ TimerDriverSetTimerPeriod (
}
// Program the SP804 timer with the new count value
MmioWrite32 (SP804_TIMER0_BASE + SP804_TIMER_LOAD_REG, TimerTicks);
MmioWrite32 (SP804_TIMER_PERIODIC_BASE + SP804_TIMER_LOAD_REG, TimerTicks);
// enable the timer
MmioOr32 (SP804_TIMER0_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE);
MmioOr32 (SP804_TIMER_PERIODIC_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE);
// enable timer 0/1 interrupts
Status = gInterrupt->EnableInterruptSource (gInterrupt, gVector);
@@ -365,26 +362,17 @@ TimerInitialize (
Status = gBS->LocateProtocol (&gHardwareInterruptProtocolGuid, NULL, (VOID **)&gInterrupt);
ASSERT_EFI_ERROR (Status);
// Configure timer 1 for free running operation, 32 bits, no prescaler, interrupt disabled
MmioWrite32 (SP804_TIMER1_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1);
// Enable the free running timer
MmioOr32 (SP804_TIMER1_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE);
// Record free running tick value (should be close to 0xffffffff)
mLastTickCount = MmioRead32 (SP804_TIMER1_BASE + SP804_TIMER_CURRENT_REG);
// Disable the timer
Status = TimerDriverSetTimerPeriod (&gTimer, 0);
ASSERT_EFI_ERROR (Status);
// Install interrupt handler
gVector = PcdGet32(PcdSP804Timer0InterruptNum);
gVector = PcdGet32(PcdSP804TimerPeriodicInterruptNum);
Status = gInterrupt->RegisterInterruptSource (gInterrupt, gVector, TimerInterruptHandler);
ASSERT_EFI_ERROR (Status);
// configure timer 0 for periodic operation, 32 bits, no prescaler, and interrupt enabled
MmioWrite32 (SP804_TIMER0_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_PERIODIC | SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1 | SP804_TIMER_CTRL_INT_ENABLE);
MmioWrite32 (SP804_TIMER_PERIODIC_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_PERIODIC | SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1 | SP804_TIMER_CTRL_INT_ENABLE);
// Set up default timer
Status = TimerDriverSetTimerPeriod (&gTimer, FixedPcdGet32(PcdTimerPeriod)); // TIMER_DEFAULT_PERIOD