MdeModulePkg: Remove variables that are set, but not used

GCC 4.6 generates a warning when a variable is set,
but never used.

Signed-off-by: jljusten
Reviewed-by: lgao4
Reviewed-by: erictian
Reviewed-by: rsun3

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12617 6f19259b-4bc3-4df7-8a09-765794883524
This commit is contained in:
jljusten
2011-10-31 15:58:05 +00:00
parent 310580cf8a
commit 7538d53684
15 changed files with 27 additions and 81 deletions

View File

@@ -1389,7 +1389,6 @@ AhciReset (
IN UINT64 Timeout
)
{
EFI_STATUS Status;
UINT32 Delay;
UINT32 Value;
@@ -1397,8 +1396,6 @@ AhciReset (
AhciOrReg (PciIo, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_RESET);
Status = EFI_TIMEOUT;
Delay = (UINT32) (DivU64x32(Timeout, 1000) + 1);
do {
@@ -2137,8 +2134,6 @@ AhciModeInitialization (
UINT32 Capability;
UINT8 MaxPortNumber;
UINT32 PortImplementBitMap;
UINT8 MaxCommandSlotNumber;
BOOLEAN Support64Bit;
EFI_AHCI_REGISTERS *AhciRegisters;
@@ -2178,9 +2173,7 @@ AhciModeInitialization (
//
// Get the number of command slots per port supported by this HBA.
//
MaxCommandSlotNumber = (UINT8) (((Capability & 0x1F00) >> 8) + 1);
MaxPortNumber = (UINT8) ((Capability & 0x1F) + 1);
Support64Bit = (BOOLEAN) (((Capability & EFI_AHCI_CAP_S64A) != 0) ? TRUE : FALSE);
//
// Get the bit map of those ports exposed by this HBA.

View File

@@ -658,13 +658,11 @@ AtaAtapiPassThruStart (
ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
EFI_PCI_IO_PROTOCOL *PciIo;
UINT64 Supports;
BOOLEAN PciAttributesSaved;
UINT64 OriginalPciAttributes;
Status = EFI_SUCCESS;
IdeControllerInit = NULL;
Instance = NULL;
PciAttributesSaved = FALSE;
OriginalPciAttributes = 0;
DEBUG ((EFI_D_INFO, "==AtaAtapiPassThru Start== Controller = %x\n", Controller));
@@ -706,7 +704,6 @@ AtaAtapiPassThruStart (
if (EFI_ERROR (Status)) {
goto ErrorExit;
}
PciAttributesSaved = TRUE;
Status = PciIo->Attributes (
PciIo,

View File

@@ -1482,7 +1482,6 @@ AtaUdmaInOut (
EFI_PCI_IO_PROTOCOL_OPERATION PciIoOperation;
UINT8 DeviceHead;
UINT8 AtaCommand;
EFI_PCI_IO_PROTOCOL *PciIo;
EFI_TPL OldTpl;
@@ -1639,7 +1638,6 @@ AtaUdmaInOut (
// Start to enable the DMA operation
//
DeviceHead = AtaCommandBlock->AtaDeviceHead;
AtaCommand = AtaCommandBlock->AtaCommand;
IdeWritePortB (PciIo, IdeRegisters->Head, (UINT8)(0xe0 | DeviceHead));
@@ -2797,7 +2795,6 @@ IdeModeInitialization (
IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
)
{
BOOLEAN EnumAll;
EFI_STATUS Status;
EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeInit;
EFI_PCI_IO_PROTOCOL *PciIo;
@@ -2808,7 +2805,6 @@ IdeModeInitialization (
IdeInit = Instance->IdeControllerInit;
PciIo = Instance->PciIo;
EnumAll = IdeInit->EnumAll;
Channel = IdeInit->ChannelCount;
//

View File

@@ -2,7 +2,7 @@
PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
which is used to enable recovery function from USB Drivers.
Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2010 - 2011, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -264,7 +264,6 @@ EhcUnlinkQhFromAsync (
)
{
PEI_EHC_QH *Head;
EFI_STATUS Status;
ASSERT (Ehc->ReclaimHead->NextQh == Qh);
@@ -283,7 +282,7 @@ EhcUnlinkQhFromAsync (
//
// Set and wait the door bell to synchronize with the hardware
//
Status = EhcSetAndWaitDoorBell (Ehc, EHC_GENERIC_TIMEOUT);
EhcSetAndWaitDoorBell (Ehc, EHC_GENERIC_TIMEOUT);
return;
}
@@ -804,8 +803,7 @@ EhcMoniteAsyncRequests (
BOOLEAN Finished;
UINT8 *ProcBuf;
PEI_URB *Urb;
EFI_STATUS Status;
UINTN PageNumber;
UINTN PageNumber;
Ehc = (PEI_USB2_HC_DEV *) Context;
@@ -826,7 +824,7 @@ EhcMoniteAsyncRequests (
// Flush any PCI posted write transactions from a PCI host
// bridge to system memory.
//
Status = EhcFlushAsyncIntMap (Ehc, Urb);
EhcFlushAsyncIntMap (Ehc, Urb);
//
// Allocate a buffer then copy the transferred data for user.
@@ -838,11 +836,11 @@ EhcMoniteAsyncRequests (
if (Urb->Result == EFI_USB_NOERROR) {
ASSERT (Urb->Completed <= Urb->DataLen);
PageNumber = Urb->Completed/PAGESIZE +1;
Status = PeiServicesAllocatePages (
EfiBootServicesCode,
PageNumber,
(EFI_PHYSICAL_ADDRESS *)ProcBuf
);
PeiServicesAllocatePages (
EfiBootServicesCode,
PageNumber,
(EFI_PHYSICAL_ADDRESS *)ProcBuf
);
if (ProcBuf == NULL) {
EhcUpdateAsyncRequest (Urb);
continue;

View File

@@ -973,16 +973,16 @@ XhcControlTransfer (
//
// For super speed hub, its bit10~12 presents the attached device speed.
//
if ((*(UINT32 *)Data & XHC_PORTSC_PS) >> 10 == 0) {
if ((State & XHC_PORTSC_PS) >> 10 == 0) {
PortStatus.PortStatus |= USB_PORT_STAT_SUPER_SPEED;
}
} else if (DeviceSpeed == EFI_USB_SPEED_HIGH) {
//
// For high speed hub, its bit9~10 presents the attached device speed.
//
if (XHC_BIT_IS_SET (*(UINT32 *)Data, BIT9)) {
if (XHC_BIT_IS_SET (State, BIT9)) {
PortStatus.PortStatus |= USB_PORT_STAT_LOW_SPEED;
} else if (XHC_BIT_IS_SET (*(UINT32 *)Data, BIT10)) {
} else if (XHC_BIT_IS_SET (State, BIT10)) {
PortStatus.PortStatus |= USB_PORT_STAT_HIGH_SPEED;
}
} else {
@@ -994,14 +994,14 @@ XhcControlTransfer (
//
MapSize = sizeof (mUsbPortStateMap) / sizeof (USB_PORT_STATE_MAP);
for (Index = 0; Index < MapSize; Index++) {
if (XHC_BIT_IS_SET (*(UINT32 *)Data, mUsbPortStateMap[Index].HwState)) {
if (XHC_BIT_IS_SET (State, mUsbPortStateMap[Index].HwState)) {
PortStatus.PortStatus = (UINT16) (PortStatus.PortStatus | mUsbPortStateMap[Index].UefiState);
}
}
MapSize = sizeof (mUsbPortChangeMap) / sizeof (USB_PORT_STATE_MAP);
for (Index = 0; Index < MapSize; Index++) {
if (XHC_BIT_IS_SET (*(UINT32 *)Data, mUsbPortChangeMap[Index].HwState)) {
if (XHC_BIT_IS_SET (State, mUsbPortChangeMap[Index].HwState)) {
PortStatus.PortChangeStatus = (UINT16) (PortStatus.PortChangeStatus | mUsbPortChangeMap[Index].UefiState);
}
}

View File

@@ -181,6 +181,7 @@ XhcCreateUrb (
Urb->Context = Context;
Status = XhcCreateTransferTrb (Xhc, Urb);
ASSERT_EFI_ERROR (Status);
return Urb;
}
@@ -740,13 +741,11 @@ XhcFreeEventRing (
EVENT_RING_SEG_TABLE_ENTRY *TablePtr;
VOID *RingBuf;
EVENT_RING_SEG_TABLE_ENTRY *EventRingPtr;
UINTN InterrupterTarget;
if(EventRing->EventRingSeg0 == NULL) {
return EFI_SUCCESS;
}
InterrupterTarget = EventRing->EventInterrupter;
//
// Get the Event Ring Segment Table base address
//
@@ -1048,12 +1047,10 @@ XhciDelAsyncIntTransfer (
LIST_ENTRY *Next;
URB *Urb;
EFI_USB_DATA_DIRECTION Direction;
BOOLEAN Found;
Direction = ((EpNum & 0x80) != 0) ? EfiUsbDataIn : EfiUsbDataOut;
EpNum &= 0x0F;
Found = FALSE;
Urb = NULL;
EFI_LIST_FOR_EACH_SAFE (Entry, Next, &Xhc->AsyncIntTransfers) {

View File

@@ -534,10 +534,8 @@ UsbBootGetParams (
{
EFI_BLOCK_IO_MEDIA *Media;
EFI_STATUS Status;
UINT8 CmdSet;
Media = &(UsbMass->BlockIoMedia);
CmdSet = ((EFI_USB_INTERFACE_DESCRIPTOR *) (UsbMass->Context))->InterfaceSubClass;
Status = UsbBootInquiry (UsbMass);
if (EFI_ERROR (Status)) {