Scrubbed some code for Udp4

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@6494 6f19259b-4bc3-4df7-8a09-765794883524
This commit is contained in:
jgong5
2008-11-13 08:08:44 +00:00
parent 9f0b86b7f9
commit bab52709d8
3 changed files with 325 additions and 285 deletions

View File

@@ -20,8 +20,6 @@ Abstract:
#include "Udp4Impl.h"
#include <Protocol/Ip4.h>
EFI_UDP4_PROTOCOL mUdp4Protocol = {
Udp4GetModeData,
Udp4Configure,
@@ -35,24 +33,23 @@ EFI_UDP4_PROTOCOL mUdp4Protocol = {
/**
This function copies the current operational settings of this EFI UDPv4 Protocol
instance into user-supplied buffers. This function is used optionally to retrieve
the operational mode data of underlying networks or drivers.
Reads the current operational settings.
@param This Pointer to the EFI_UDP4_PROTOCOL instance.
@param Udp4ConfigData Pointer to the buffer to receive the current
configuration data.
@param Ip4ModeData Pointer to the EFI IPv4 Protocol mode data
structure.
@param MnpConfigData Pointer to the managed network configuration data
structure.
@param SnpModeData Pointer to the simple network mode data structure.
The GetModeData() function copies the current operational settings of this EFI
UDPv4 Protocol instance into user-supplied buffers. This function is used
optionally to retrieve the operational mode data of underlying networks or
drivers.
@retval EFI_SUCCESS The mode data was read.
@retval EFI_NOT_STARTED When Udp4ConfigData is queried, no configuration
data is available because this instance has not
been started.
@retval EFI_INVALID_PARAMETER This is NULL.
@param This Pointer to the EFI_UDP4_PROTOCOL instance.
@param Udp4ConfigData Pointer to the buffer to receive the current configuration data.
@param Ip4ModeData Pointer to the EFI IPv4 Protocol mode data structure.
@param MnpConfigData Pointer to the managed network configuration data structure.
@param SnpModeData Pointer to the simple network mode data structure.
@retval EFI_SUCCESS The mode data was read.
@retval EFI_NOT_STARTED When Udp4ConfigData is queried, no configuration data is
available because this instance has not been started.
@retval EFI_INVALID_PARAMETER This is NULL.
**/
EFI_STATUS
@@ -103,39 +100,36 @@ Udp4GetModeData (
/**
This function is used to do the following:
Initialize and start this instance of the EFI UDPv4 Protocol.
Change the filtering rules and operational parameters.
Reset this instance of the EFI UDPv4 Protocol.
Initializes, changes, or resets the operational parameters for this instance of the EFI UDPv4
Protocol.
The Configure() function is used to do the following:
* Initialize and start this instance of the EFI UDPv4 Protocol.
* Change the filtering rules and operational parameters.
* Reset this instance of the EFI UDPv4 Protocol.
Until these parameters are initialized, no network traffic can be sent or
received by this instance. This instance can be also reset by calling Configure()
with UdpConfigData set to NULL. Once reset, the receiving queue and transmitting
queue are flushed and no traffic is allowed through this instance.
With different parameters in UdpConfigData, Configure() can be used to bind
this instance to specified port.
@param This Pointer to the EFI_UDP4_PROTOCOL instance.
@param UdpConfigData Pointer to the buffer to receive the current mode
data.
@param This Pointer to the EFI_UDP4_PROTOCOL instance.
@param UdpConfigData Pointer to the buffer to receive the current configuration data.
@retval EFI_SUCCESS The configuration settings were set, changed, or
reset successfully.
@retval EFI_NO_MAPPING When using a default address, configuration (DHCP,
BOOTP, RARP, etc.) is not finished yet.
@retval EFI_INVALID_PARAMETER One or more following conditions are TRUE: This is
NULL. UdpConfigData.StationAddress is not a valid
unicast IPv4 address. UdpConfigData.SubnetMask is
not a valid IPv4 address mask.
UdpConfigData.RemoteAddress is not a valid unicast
IPv4 address if it is not zero.
@retval EFI_ALREADY_STARTED The EFI UDPv4 Protocol instance is already
started/configured and must be stopped/reset
before it can be reconfigured. Only TypeOfService,
TimeToLive, DoNotFragment, ReceiveTimeout, and
TransmitTimeout can be reconfigured without
stopping the current instance of the EFI UDPv4
Protocol.
@retval EFI_ACCESS_DENIED UdpConfigData.AllowDuplicatePort is FALSE and
UdpConfigData.StationPort is already used by other
instance.
@retval EFI_OUT_OF_RESOURCES The EFI UDPv4 Protocol driver cannot allocate
memory for this EFI UDPv4 Protocol instance.
@retval EFI_DEVICE_ERROR An unexpected network or system error occurred and
this instance was not opened.
@retval EFI_SUCCESS The configuration settings were set, changed, or reset successfully.
@retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP,
RARP, etc.) is not finished yet.
@retval EFI_INVALID_PARAMETER One or more following conditions are TRUE:
@retval EFI_ALREADY_STARTED The EFI UDPv4 Protocol instance is already started/configured
and must be stopped/reset before it can be reconfigured.
@retval EFI_ACCESS_DENIED UdpConfigData. AllowDuplicatePort is FALSE
and UdpConfigData.StationPort is already used by
other instance.
@retval EFI_OUT_OF_RESOURCES The EFI UDPv4 Protocol driver cannot allocate memory for this
EFI UDPv4 Protocol instance.
@retval EFI_DEVICE_ERROR An unexpected network or system error occurred and this instance
was not opened.
**/
EFI_STATUS
@@ -305,30 +299,32 @@ ON_EXIT:
/**
This function is used to enable and disable the multicast group filtering.
Joins and leaves multicast groups.
The Groups() function is used to enable and disable the multicast group
filtering. If the JoinFlag is FALSE and the MulticastAddress is NULL, then all
currently joined groups are left.
@param This Pointer to the EFI_UDP4_PROTOCOL instance.
@param JoinFlag Set to TRUE to join a multicast group. Set to
FALSE to leave one or all multicast groups.
@param MulticastAddress Pointer to multicast group address to join or
leave.
@param This Pointer to the EFI_UDP4_PROTOCOL instance.
@param JoinFlag Set to TRUE to join a multicast group. Set to FALSE to leave one
or all multicast groups.
@param MulticastAddress Pointer to multicast group address to join or leave.
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_NOT_STARTED The EFI UDPv4 Protocol instance has not been
started.
@retval EFI_NO_MAPPING When using a default address, configuration (DHCP,
BOOTP, RARP, etc.) is not finished yet.
@retval EFI_OUT_OF_RESOURCES Could not allocate resources to join the group.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
This is NULL. JoinFlag is TRUE and
MulticastAddress is NULL. JoinFlag is TRUE and
*MulticastAddress is not a valid multicast
address.
@retval EFI_ALREADY_STARTED The group address is already in the group table
(when JoinFlag is TRUE).
@retval EFI_NOT_FOUND The group address is not in the group table (when
JoinFlag is FALSE).
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_NOT_STARTED The EFI UDPv4 Protocol instance has not been started.
@retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP,
RARP, etc.) is not finished yet.
@retval EFI_OUT_OF_RESOURCES Could not allocate resources to join the group.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
- This is NULL.
- JoinFlag is TRUE and MulticastAddress is NULL.
- JoinFlag is TRUE and *MulticastAddress is not
a valid multicast address.
@retval EFI_ALREADY_STARTED The group address is already in the group table (when
JoinFlag is TRUE).
@retval EFI_NOT_FOUND The group address is not in the group table (when JoinFlag is
FALSE).
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
**/
EFI_STATUS
@@ -385,7 +381,7 @@ Udp4Groups (
// Keep a local copy of the configured multicast IPs because IpIo receives
// datagrams from the 0 station address IP instance and then UDP delivers to
// the matched instance. This copy of multicast IPs is used to avoid receive
// the mutlicast datagrams destinated to multicast IPs the other instances configured.
// the mutlicast datagrams destined to multicast IPs the other instances configured.
//
if (JoinFlag) {
@@ -404,31 +400,41 @@ ON_EXIT:
/**
This function adds a route to or deletes a route from the routing table.
Adds and deletes routing table entries.
The Routes() function adds a route to or deletes a route from the routing table.
Routes are determined by comparing the SubnetAddress with the destination IP
address and arithmetically AND-ing it with the SubnetMask. The gateway address
must be on the same subnet as the configured station address.
The default route is added with SubnetAddress and SubnetMask both set to 0.0.0.0.
The default route matches all destination IP addresses that do not match any
other routes.
A zero GatewayAddress is a nonroute. Packets are sent to the destination IP
address if it can be found in the Address Resolution Protocol (ARP) cache or
on the local subnet. One automatic nonroute entry will be inserted into the
routing table for outgoing packets that are addressed to a local subnet
(gateway address of 0.0.0.0).
Each instance of the EFI UDPv4 Protocol has its own independent routing table.
Instances of the EFI UDPv4 Protocol that use the default IP address will also
have copies of the routing table provided by the EFI_IP4_CONFIG_PROTOCOL. These
copies will be updated automatically whenever the IP driver reconfigures its
instances; as a result, the previous modification to these copies will be lost.
@param This Pointer to the EFI_UDP4_PROTOCOL instance.
@param DeleteRoute Set to TRUE to delete this route from the routing
table. Set to FALSE to add this route to the
routing table.
@param SubnetAddress The destination network address that needs to be
routed.
@param SubnetMask The subnet mask of SubnetAddress.
@param GatewayAddress The gateway IP address for this route.
@param This Pointer to the EFI_UDP4_PROTOCOL instance.
@param DeleteRoute Set to TRUE to delete this route from the routing table.
Set to FALSE to add this route to the routing table.
@param SubnetAddress The destination network address that needs to be routed.
@param SubnetMask The subnet mask of SubnetAddress.
@param GatewayAddress The gateway IP address for this route.
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_NOT_STARTED The EFI UDPv4 Protocol instance has not been
started.
@retval EFI_NO_MAPPING When using a default address, configuration (DHCP,
BOOTP, RARP, etc.) is not finished yet.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
This is NULL. SubnetAddress is NULL. SubnetMask is
NULL. GatewayAddress is NULL. SubnetAddress is not
a valid subnet address. SubnetMask is not a valid
subnet mask. GatewayAddress is not a valid unicast
IP address.
@retval EFI_OUT_OF_RESOURCES Could not add the entry to the routing table.
@retval EFI_NOT_FOUND This route is not in the routing table.
@retval EFI_ACCESS_DENIED The route is already defined in the routing table.
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_NOT_STARTED The EFI UDPv4 Protocol instance has not been started.
@retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP,
- RARP, etc.) is not finished yet.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
@retval EFI_OUT_OF_RESOURCES Could not add the entry to the routing table.
@retval EFI_NOT_FOUND This route is not in the routing table.
@retval EFI_ACCESS_DENIED The route is already defined in the routing table.
**/
EFI_STATUS
@@ -468,44 +474,33 @@ Udp4Routes (
/**
This function places a sending request to this instance of the EFI UDPv4 Protocol,
alongside the transmit data that was filled by the user.
Queues outgoing data packets into the transmit queue.
The Transmit() function places a sending request to this instance of the EFI
UDPv4 Protocol, alongside the transmit data that was filled by the user. Whenever
the packet in the token is sent out or some errors occur, the Token.Event will
be signaled and Token.Status is updated. Providing a proper notification function
and context for the event will enable the user to receive the notification and
transmitting status.
@param This Pointer to the EFI_UDP4_PROTOCOL instance.
@param Token Pointer to the completion token that will be
placed into the transmit queue.
@param This Pointer to the EFI_UDP4_PROTOCOL instance.
@param Token Pointer to the completion token that will be placed into the
transmit queue.
@retval EFI_SUCCESS The data has been queued for transmission.
@retval EFI_NOT_STARTED This EFI UDPv4 Protocol instance has not been
started.
@retval EFI_NO_MAPPING When using a default address, configuration (DHCP,
BOOTP, RARP, etc.) is not finished yet.
@retval EFI_INVALID_PARAMETER One or more of the following are TRUE: This is
NULL. Token is NULL. Token.Event is NULL.
Token.Packet.TxData is NULL.
Token.Packet.TxData.FragmentCount is zero.
Token.Packet.TxData.DataLength is not equal to the
sum of fragment lengths. One or more of the
Token.Packet.TxData.FragmentTable[].
FragmentLength fields is zero. One or more of the
Token.Packet.TxData.FragmentTable[].
FragmentBuffer fields is NULL.
Token.Packet.TxData. GatewayAddress is not a
unicast IPv4 address if it is not NULL. One or
more IPv4 addresses in Token.Packet.TxData.
UdpSessionData are not valid unicast IPv4
addresses if the UdpSessionData is not NULL.
@retval EFI_ACCESS_DENIED The transmit completion token with the same
Token.Event is already in the transmit queue.
@retval EFI_NOT_READY The completion token could not be queued because
the transmit queue is full.
@retval EFI_OUT_OF_RESOURCES Could not queue the transmit data.
@retval EFI_NOT_FOUND There is no route to the destination network or
address.
@retval EFI_BAD_BUFFER_SIZE The data length is greater than the maximum UDP
packet size. Or the length of the IP header + UDP
header + data length is greater than MTU if
DoNotFragment is TRUE.
@retval EFI_SUCCESS The data has been queued for transmission.
@retval EFI_NOT_STARTED This EFI UDPv4 Protocol instance has not been started.
@retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP,
RARP, etc.) is not finished yet.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
@retval EFI_ACCESS_DENIED The transmit completion token with the same
Token.Event was already in the transmit queue.
@retval EFI_NOT_READY The completion token could not be queued because the
transmit queue is full.
@retval EFI_OUT_OF_RESOURCES Could not queue the transmit data.
@retval EFI_NOT_FOUND There is no route to the destination network or address.
@retval EFI_BAD_BUFFER_SIZE The data length is greater than the maximum UDP packet
size. Or the length of the IP header + UDP header + data
length is greater than MTU if DoNotFragment is TRUE.
**/
EFI_STATUS
@@ -704,30 +699,32 @@ ON_EXIT:
/**
This function places a completion token into the receive packet queue. This function
is always asynchronous.
Places an asynchronous receive request into the receiving queue.
The Receive() function places a completion token into the receive packet queue.
This function is always asynchronous.
The caller must fill in the Token.Event field in the completion token, and this
field cannot be NULL. When the receive operation completes, the EFI UDPv4 Protocol
driver updates the Token.Status and Token.Packet.RxData fields and the Token.Event
is signaled. Providing a proper notification function and context for the event
will enable the user to receive the notification and receiving status. That
notification function is guaranteed to not be re-entered.
@param This Pointer to the EFI_UDP4_PROTOCOL instance.
@param Token Pointer to a token that is associated with the
receive data descriptor.
@param This Pointer to the EFI_UDP4_PROTOCOL instance.
@param Token Pointer to a token that is associated with the receive data
descriptor.
@retval EFI_SUCCESS The receive completion token is cached.
@retval EFI_NOT_STARTED This EFI UDPv4 Protocol instance has not been
started.
@retval EFI_NO_MAPPING When using a default address, configuration (DHCP,
BOOTP, RARP, etc.) is not finished yet.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
This is NULL. Token is NULL. Token.Event is NULL.
@retval EFI_OUT_OF_RESOURCES The receive completion token could not be queued
due to a lack of system resources (usually
memory).
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
The EFI UDPv4 Protocol instance has been reset to
startup defaults.
@retval EFI_ACCESS_DENIED A receive completion token with the same
Token.Event is already in the receive queue.
@retval EFI_NOT_READY The receive request could not be queued because
the receive queue is full.
@retval EFI_SUCCESS The receive completion token was cached.
@retval EFI_NOT_STARTED This EFI UDPv4 Protocol instance has not been started.
@retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP, RARP, etc.)
is not finished yet.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
@retval EFI_OUT_OF_RESOURCES The receive completion token could not be queued due to a lack of system
resources (usually memory).
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
@retval EFI_ACCESS_DENIED A receive completion token with the same Token.Event was already in
the receive queue.
@retval EFI_NOT_READY The receive request could not be queued because the receive queue is full.
**/
EFI_STATUS
@@ -784,7 +781,7 @@ Udp4Receive (
Udp4ReportIcmpError (Instance);
//
// Try to delivered the received datagrams.
// Try to deliver the received datagrams.
//
Udp4InstanceDeliverDgram (Instance);
@@ -802,25 +799,31 @@ ON_EXIT:
/**
This function is used to abort a pending transmit or receive request.
Aborts an asynchronous transmit or receive request.
The Cancel() function is used to abort a pending transmit or receive request.
If the token is in the transmit or receive request queues, after calling this
function, Token.Status will be set to EFI_ABORTED and then Token.Event will be
signaled. If the token is not in one of the queues, which usually means that
the asynchronous operation has completed, this function will not signal the
token and EFI_NOT_FOUND is returned.
@param This Pointer to the EFI_UDP4_PROTOCOL instance.
@param Token Pointer to a token that has been issued by
EFI_UDP4_PROTOCOL.Transmit() or
EFI_UDP4_PROTOCOL.Receive().
@param This Pointer to the EFI_UDP4_PROTOCOL instance.
@param Token Pointer to a token that has been issued by
EFI_UDP4_PROTOCOL.Transmit() or
EFI_UDP4_PROTOCOL.Receive().If NULL, all pending
tokens are aborted.
@retval EFI_SUCCESS The asynchronous I/O request is aborted and
Token.Event is signaled. When Token is NULL, all
pending requests are aborted and their events are
signaled.
@retval EFI_INVALID_PARAMETER This is NULL.
@retval EFI_NOT_STARTED This instance has not been started.
@retval EFI_NO_MAPPING When using the default address, configuration
(DHCP, BOOTP, RARP, etc.) is not finished yet.
@retval EFI_NOT_FOUND When Token is not NULL, the asynchronous I/O
request is not found in the transmit or receive
queue. It is either completed or not issued by
Transmit() or Receive().
@retval EFI_SUCCESS The asynchronous I/O request was aborted and Token.Event
was signaled. When Token is NULL, all pending requests are
aborted and their events are signaled.
@retval EFI_INVALID_PARAMETER This is NULL.
@retval EFI_NOT_STARTED This instance has not been started.
@retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP,
RARP, etc.) is not finished yet.
@retval EFI_NOT_FOUND When Token is not NULL, the asynchronous I/O request was
not found in the transmit or receive queue. It has either completed
or was not issued by Transmit() and Receive().
**/
EFI_STATUS
@@ -856,7 +859,7 @@ Udp4Cancel (
Status = Udp4InstanceCancelToken (Instance, Token);
//
// Dispatch the DPC queued by the NotifyFunction of the canceled token's events.
// Dispatch the DPC queued by the NotifyFunction of the cancelled token's events.
//
NetLibDispatchDpc ();
@@ -867,16 +870,23 @@ Udp4Cancel (
/**
This function can be used by network drivers and applications to increase the rate that
data packets are moved between the communications device and the transmit/receive queues.
Argumens:
This - Pointer to the EFI_UDP4_PROTOCOL instance.
Polls for incoming data packets and processes outgoing data packets.
The Poll() function can be used by network drivers and applications to increase
the rate that data packets are moved between the communications device and the
transmit and receive queues.
In some systems, the periodic timer event in the managed network driver may not
poll the underlying communications device fast enough to transmit and/or receive
all data packets without missing incoming packets or dropping outgoing packets.
Drivers and applications that are experiencing packet loss should try calling
the Poll() function more often.
@retval EFI_SUCCESS Incoming or outgoing data was processed.
@retval EFI_INVALID_PARAMETER This is NULL.
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
@retval EFI_TIMEOUT Data was dropped out of the transmit and/or
receive queue.
@param This Pointer to the EFI_UDP4_PROTOCOL instance.
@retval EFI_SUCCESS Incoming or outgoing data was processed.
@retval EFI_INVALID_PARAMETER This is NULL.
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
@retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive queue.
**/
EFI_STATUS