sravan/system76-edk2
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ArmPlatformPkg/PL35xSmc: Clean SMC driver to replace hardcoded Chip Select into the driver itself by passing SMC configuration to the driver

Browse Source 
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11959 6f19259b-4bc3-4df7-8a09-765794883524
This commit is contained in:
oliviermartin
2011-07-01 16:33:22 +00:00
parent 3c4b742c18
commit c52e2dca64
14 changed files with 419 additions and 466 deletions
Download Patch File Download Diff File Expand all files Collapse all files

185
ArmPlatformPkg/Drivers/PL35xSmc/InitializeSMC.S
View File

@@ -21,176 +21,33 @@
#Maintain 8 byte alignment
.align 3
GCC_ASM_EXPORT(PL35xSmcInitialize)
GCC_ASM_EXPORT(SMCInitializeNOR)
GCC_ASM_EXPORT(SMCInitializeSRAM)
GCC_ASM_EXPORT(SMCInitializePeripherals)
GCC_ASM_EXPORT(SMCInitializeVRAM)
# CS0 CS0-Interf0 NOR1 flash on the motherboard
# CS1 CS1-Interf0 Reserved for the motherboard
# CS2 CS2-Interf0 SRAM on the motherboard
# CS3 CS3-Interf0 memory-mapped Ethernet and USB controllers on the motherboard
# CS4 CS0-Interf1 NOR2 flash on the motherboard
# CS5 CS1-Interf1 memory-mapped peripherals
# CS6 CS2-Interf1 memory-mapped peripherals
# CS7 CS3-Interf1 system memory-mapped peripherals on the motherboard.
// IN r1 SmcBase
// IN r2 ChipSelect
// IN r1 Smc Base Address
// IN r2 Smc Configuration Start Address
// IN r3 Smc Configuration End Address
// NOTE: This code is been called before any stack has been setup. It means some registers
// could be overwritten (case of 'r0')
ASM_PFX(SMCInitializeNOR):
#
# Setup NOR1 (CS0-Interface0)
#
ASM_PFX(PL35xSmcInitialize):
// While (SmcConfigurationStart < SmcConfigurationEnd)
cmp r2, r3
blxge lr
# Write to set_cycle register(holding register for NOR 1 cycle register or NAND cycle register)
#Read cycle timeout = 0xA (0:3)
#Write cycle timeout = 0x3(7:4)
#OE Assertion Delay = 0x9(11:8)
#WE Assertion delay = 0x3(15:12)
#Page cycle timeout = 0x2(19:16)
LoadConstantToReg (0x0002393A,r0) @ldr r0, = 0x0002393A
str r0, [r1, #PL354_SMC_SET_CYCLES_OFFSET]
# Write to set_opmode register(holding register for NOR 1 opomode register or NAND opmode register)
# 0x00000002 = MemoryWidth: 32bit
# 0x00000028 = ReadMemoryBurstLength:continuous
# 0x00000280 = WriteMemoryBurstLength:continuous
# 0x00000800 = Set Address Valid
LoadConstantToReg (0x00000AAA,r0) @ldr r0, = 0x00000AAA
str r0, [r1, #PL354_SMC_SET_OPMODE_OFFSET]
// Write to set_cycle register(holding register for NOR 1 cycle register or NAND cycle register)
ldr r0, [r2, #0x4]
str r0, [r1, #PL350_SMC_SET_CYCLES_OFFSET]
# Write to direct_cmd register so that the NOR 1 registers(set-cycles and opmode) are updated with holding registers
# 0x00000000 = ChipSelect0-Interface 0
# 0x00400000 = CmdTypes: UpdateRegs
LoadConstantToReg (0x00400000,r0) @ldr r0, = 0x00400000
str r0, [r1, #PL354_SMC_DIRECT_CMD_OFFSET]
bx lr
// Write to set_opmode register(holding register for NOR 1 opomode register or NAND opmode register)
ldr r0, [r2, #0x8]
str r0, [r1, #PL350_SMC_SET_OPMODE_OFFSET]
ASM_PFX(SMCInitializeSRAM):
#
# Setup SRAM (CS2-Interface0)
#
LoadConstantToReg (0x00027158,r0) @ldr r0, = 0x00027158
str r0, [r1, #PL354_SMC_SET_CYCLES_OFFSET]
// Write to direct_cmd register so that the NOR 1 registers(set-cycles and opmode) are updated with holding registers
ldr r0, =PL350_SMC_DIRECT_CMD_ADDR_CMD_UPDATE
ldr r4, [r2, #0x0]
orr r0, r0, r4
str r0, [r1, #PL350_SMC_DIRECT_CMD_OFFSET]
# 0x00000002 = MemoryWidth: 32bit
# 0x00000800 = Set Address Valid
LoadConstantToReg (0x00000802,r0) @ldr r0, = 0x00000802
str r0, [r1, #PL354_SMC_SET_OPMODE_OFFSET]
# 0x01000000 = ChipSelect2-Interface 0
# 0x00400000 = CmdTypes: UpdateRegs
LoadConstantToReg (0x01400000,r0) @ldr r0, = 0x01400000
str r0, [r1, #PL354_SMC_DIRECT_CMD_OFFSET]
add r2, #0xC
b ASM_PFX(PL350SmcInitialize)
bx lr
ASM_PFX(SMCInitializePeripherals):
#
# USB/Eth/VRAM (CS3-Interface0)
#
LoadConstantToReg (0x000CD2AA,r0) @ldr r0, = 0x000CD2AA
str r0, [r1, #PL354_SMC_SET_CYCLES_OFFSET]
# 0x00000002 = MemoryWidth: 32bit
# 0x00000004 = Memory reads are synchronous
# 0x00000040 = Memory writes are synchronous
LoadConstantToReg (0x00000046,r0) @ldr r0, = 0x00000046
str r0, [r1, #PL354_SMC_SET_OPMODE_OFFSET]
# 0x01800000 = ChipSelect3-Interface 0
# 0x00400000 = CmdTypes: UpdateRegs
LoadConstantToReg (0x01C00000,r0) @ldr r0, = 0x01C00000
str r0, [r1, #PL354_SMC_DIRECT_CMD_OFFSET]
#
# Setup NOR3 (CS0-Interface1)
#
LoadConstantToReg (0x0002393A,r0) @ldr r0, = 0x0002393A
str r0, [r1, #PL354_SMC_SET_CYCLES_OFFSET]
# 0x00000002 = MemoryWidth: 32bit
# 0x00000028 = ReadMemoryBurstLength:continuous
# 0x00000280 = WriteMemoryBurstLength:continuous
# 0x00000800 = Set Address Valid
LoadConstantToReg (0x00000AAA,r0) @ldr r0, = 0x00000AAA
str r0, [r1, #PL354_SMC_SET_OPMODE_OFFSET]
# 0x02000000 = ChipSelect0-Interface 1
# 0x00400000 = CmdTypes: UpdateRegs
LoadConstantToReg (0x02400000,r0) @ldr r0, = 0x02400000
str r0, [r1, #PL354_SMC_DIRECT_CMD_OFFSET]
#
# Setup Peripherals (CS3-Interface1)
#
LoadConstantToReg (0x00025156,r0) @ldr r0, = 0x00025156
str r0, [r1, #PL354_SMC_SET_CYCLES_OFFSET]
# 0x00000002 = MemoryWidth: 32bit
# 0x00000004 = Memory reads are synchronous
# 0x00000040 = Memory writes are synchronous
LoadConstantToReg (0x00000046,r0) @ldr r0, = 0x00000046
str r0, [r1, #PL354_SMC_SET_OPMODE_OFFSET]
# 0x03800000 = ChipSelect3-Interface 1
# 0x00400000 = CmdTypes: UpdateRegs
LoadConstantToReg (0x03C00000,r0) @ldr r0, = 0x03C00000
str r0, [r1, #PL354_SMC_DIRECT_CMD_OFFSET]
bx lr
// IN r1 SmcBase
// IN r2 VideoSRamBase
// NOTE: This code is been called before any stack has been setup. It means some registers
// could be overwritten (case of 'r0')
ASM_PFX(SMCInitializeVRAM):
#
# Setup VRAM (CS1-Interface0)
#
LoadConstantToReg (0x00049249,r0) @ldr r0, = 0x00049249
str r0, [r1, #PL354_SMC_SET_CYCLES_OFFSET]
# 0x00000002 = MemoryWidth: 32bit
# 0x00000004 = Memory reads are synchronous
# 0x00000040 = Memory writes are synchronous
LoadConstantToReg (0x00000046,r0) @ldr r0, = 0x00000046
str r0, [r1, #PL354_SMC_SET_OPMODE_OFFSET]
# 0x00800000 = ChipSelect1-Interface 0
# 0x00400000 = CmdTypes: UpdateRegs
LoadConstantToReg (0x00C00000,r0) @ldr r0, = 0x00C00000
str r0, [r1, #PL354_SMC_DIRECT_CMD_OFFSET]
#
# Page mode setup for VRAM
#
#read current state
ldr r0, [r2, #0]
ldr r0, [r2, #0]
LoadConstantToReg (0x00000000,r0) @ldr r0, = 0x00000000
str r0, [r2, #0]
ldr r0, [r2, #0]
#enable page mode
ldr r0, [r2, #0]
ldr r0, [r2, #0]
LoadConstantToReg (0x00000000,r0) @ldr r0, = 0x00000000
str r0, [r2, #0]
LoadConstantToReg (0x00900090,r0) @ldr r0, = 0x00900090
str r0, [r2, #0]
#confirm page mode enabled
ldr r0, [r2, #0]
ldr r0, [r2, #0]
LoadConstantToReg (0x00000000,r0) @ldr r0, = 0x00000000
str r0, [r2, #0]
ldr r0, [r2, #0]
bx lr
ASM_FUNCTION_REMOVE_IF_UNREFERENCED