sravan/system76-edk2
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

SecurityPkg: OpalPasswordSmm: Add Opal password Smm driver.

Browse Source 
This driver used to unlock device in S3 resume phase.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This commit is contained in:
Eric Dong
2016-03-29 14:49:25 +08:00
committed by Feng Tian
parent a06875e1f0
commit cb274a2703
10 changed files with 7466 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

173
SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalIdeMode.h Normal file
View File

@@ -0,0 +1,173 @@
/** @file
Header file for IDE mode of ATA host controller.
Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef __OPAL_PASSWORD_IDE_MODE_H__
#define __OPAL_PASSWORD_IDE_MODE_H__
typedef enum {
EfiIdePrimary = 0,
EfiIdeSecondary = 1,
EfiIdeMaxChannel = 2
} EFI_IDE_CHANNEL;
typedef enum {
EfiIdeMaster = 0,
EfiIdeSlave = 1,
EfiIdeMaxDevice = 2
} EFI_IDE_DEVICE;
//
// IDE registers set
//
typedef struct {
UINT16 Data;
UINT16 ErrOrFeature;
UINT16 SectorCount;
UINT16 SectorNumber;
UINT16 CylinderLsb;
UINT16 CylinderMsb;
UINT16 Head;
UINT16 CmdOrStatus;
UINT16 AltOrDev;
} EFI_IDE_REGISTERS;
//
// Bit definitions in Programming Interface byte of the Class Code field
// in PCI IDE controller's Configuration Space
//
#define IDE_PRIMARY_OPERATING_MODE BIT0
#define IDE_PRIMARY_PROGRAMMABLE_INDICATOR BIT1
#define IDE_SECONDARY_OPERATING_MODE BIT2
#define IDE_SECONDARY_PROGRAMMABLE_INDICATOR BIT3
/**
Get IDE i/o port registers' base addresses by mode.
In 'Compatibility' mode, use fixed addresses.
In Native-PCI mode, get base addresses from BARs in the PCI IDE controller's
Configuration Space.
The steps to get IDE i/o port registers' base addresses for each channel
as follows:
1. Examine the Programming Interface byte of the Class Code fields in PCI IDE
controller's Configuration Space to determine the operating mode.
2. a) In 'Compatibility' mode, use fixed addresses shown in the Table 1 below.
___________________________________________
| | Command Block | Control Block |
| Channel | Registers | Registers |
|___________|_______________|_______________|
| Primary | 1F0h - 1F7h | 3F6h - 3F7h |
|___________|_______________|_______________|
| Secondary | 170h - 177h | 376h - 377h |
|___________|_______________|_______________|
Table 1. Compatibility resource mappings
b) In Native-PCI mode, IDE registers are mapped into IO space using the BARs
in IDE controller's PCI Configuration Space, shown in the Table 2 below.
___________________________________________________
| | Command Block | Control Block |
| Channel | Registers | Registers |
|___________|___________________|___________________|
| Primary | BAR at offset 0x10| BAR at offset 0x14|
|___________|___________________|___________________|
| Secondary | BAR at offset 0x18| BAR at offset 0x1C|
|___________|___________________|___________________|
Table 2. BARs for Register Mapping
@param[in] Bus The bus number of ata host controller.
@param[in] Device The device number of ata host controller.
@param[in] Function The function number of ata host controller.
@param[in, out] IdeRegisters Pointer to EFI_IDE_REGISTERS which is used to
store the IDE i/o port registers' base addresses
@retval EFI_UNSUPPORTED Return this Value when the BARs is not IO type
@retval EFI_SUCCESS Get the Base address successfully
@retval Other Read the pci configureation Data error
**/
EFI_STATUS
EFIAPI
GetIdeRegisterIoAddr (
IN UINTN Bus,
IN UINTN Device,
IN UINTN Function,
IN OUT EFI_IDE_REGISTERS *IdeRegisters
);
/**
Sends out an ATA Identify Command to the specified device.
This function sends out the ATA Identify Command to the
specified device. Only ATA device responses to this command. If
the command succeeds, it returns the Identify Data structure which
contains information about the device. This function extracts the
information it needs to fill the IDE_BLK_IO_DEV Data structure,
including device type, media block Size, media capacity, and etc.
@param IdeRegisters A pointer to EFI_IDE_REGISTERS Data structure.
@param Channel The channel number of device.
@param Device The device number of device.
@param Buffer A pointer to Data Buffer which is used to contain IDENTIFY Data.
@retval EFI_SUCCESS Identify ATA device successfully.
@retval EFI_DEVICE_ERROR ATA Identify Device Command failed or device is not ATA device.
@retval EFI_OUT_OF_RESOURCES Allocate memory failed.
**/
EFI_STATUS
EFIAPI
AtaIdentify (
IN EFI_IDE_REGISTERS *IdeRegisters,
IN UINT8 Channel,
IN UINT8 Device,
IN OUT ATA_IDENTIFY_DATA *Buffer
);
/**
This function is used to send out ATA commands conforms to the PIO Data In Protocol.
@param IdeRegisters A pointer to EFI_IDE_REGISTERS Data structure.
@param Buffer A pointer to the source Buffer for the Data.
@param ByteCount The Length of the Data.
@param Read Flag used to determine the Data transfer direction.
Read equals 1, means Data transferred from device to host;
Read equals 0, means Data transferred from host to device.
@param AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK Data structure.
@param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK Data structure.
@param Timeout The time to complete the command.
@retval EFI_SUCCESS send out the ATA command and device send required Data successfully.
@retval EFI_DEVICE_ERROR command sent failed.
**/
EFI_STATUS
EFIAPI
AtaPioDataInOut (
IN EFI_IDE_REGISTERS *IdeRegisters,
IN OUT VOID *Buffer,
IN UINT64 ByteCount,
IN BOOLEAN Read,
IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
IN UINT64 Timeout
);
#endif