Revert "UefiCpuPkg: Has APs in 64 bit long-mode before booting to OS."

This reverts commit 73ccde8f6d since it
results in a hang of the IA32 processor and needs further clean-up.

Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4234
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
This commit is contained in:
Yuanhao Xie
2023-01-09 11:37:21 +08:00
committed by mergify[bot]
parent d8d829b89d
commit cbcf0cd65e
7 changed files with 200 additions and 184 deletions

View File

@@ -279,42 +279,120 @@ CProcedureInvoke:
RendezvousFunnelProcEnd:
;-------------------------------------------------------------------------------------
; AsmRelocateApLoop (MwaitSupport, ApTargetCState, TopOfApStack, CountTofinish, Cr3);
; This function is called during the finalizaiton of Mp initialization before booting
; to OS, and aim to put Aps either in Mwait or HLT.
; AsmRelocateApLoop (MwaitSupport, ApTargetCState, PmCodeSegment, TopOfApStack, CountTofinish, Pm16CodeSegment, SevEsAPJumpTable, WakeupBuffer);
;-------------------------------------------------------------------------------------
; +----------------+
; | Cr3 | rsp+40
; +----------------+
; | CountTofinish | r9
; +----------------+
; | TopOfApStack | r8
; +----------------+
; | ApTargetCState | rdx
; +----------------+
; | MwaitSupport | rcx
; +----------------+
; | the return |
; +----------------+ low address
AsmRelocateApLoopStart:
mov rax, r9 ; CountTofinish
BITS 64
cmp qword [rsp + 56], 0 ; SevEsAPJumpTable
je NoSevEs
;
; Perform some SEV-ES related setup before leaving 64-bit mode
;
push rcx
push rdx
;
; Get the RDX reset value using CPUID
;
mov rax, 1
cpuid
mov rsi, rax ; Save off the reset value for RDX
;
; Prepare the GHCB for the AP_HLT_LOOP VMGEXIT call
; - Must be done while in 64-bit long mode so that writes to
; the GHCB memory will be unencrypted.
; - No NAE events can be generated once this is set otherwise
; the AP_RESET_HOLD SW_EXITCODE will be overwritten.
;
mov rcx, 0xc0010130
rdmsr ; Retrieve current GHCB address
shl rdx, 32
or rdx, rax
mov rdi, rdx
xor rax, rax
mov rcx, 0x800
shr rcx, 3
rep stosq ; Clear the GHCB
mov rax, 0x80000004 ; VMGEXIT AP_RESET_HOLD
mov [rdx + 0x390], rax
mov rax, 114 ; Set SwExitCode valid bit
bts [rdx + 0x3f0], rax
inc rax ; Set SwExitInfo1 valid bit
bts [rdx + 0x3f0], rax
inc rax ; Set SwExitInfo2 valid bit
bts [rdx + 0x3f0], rax
pop rdx
pop rcx
NoSevEs:
cli ; Disable interrupt before switching to 32-bit mode
mov rax, [rsp + 40] ; CountTofinish
lock dec dword [rax] ; (*CountTofinish)--
mov rax, [rsp + 40] ; Cr3
; Do not push on old stack, since old stack is not mapped
; in the page table pointed by cr3
mov cr3, rax
mov rsp, r8 ; TopOfApStack
mov r10, [rsp + 48] ; Pm16CodeSegment
mov rax, [rsp + 56] ; SevEsAPJumpTable
mov rbx, [rsp + 64] ; WakeupBuffer
mov rsp, r9 ; TopOfApStack
push rax ; Save SevEsAPJumpTable
push rbx ; Save WakeupBuffer
push r10 ; Save Pm16CodeSegment
push rcx ; Save MwaitSupport
push rdx ; Save ApTargetCState
lea rax, [PmEntry] ; rax <- The start address of transition code
push r8
push rax
;
; Clear R8 - R15, for reset, before going into 32-bit mode
;
xor r8, r8
xor r9, r9
xor r10, r10
xor r11, r11
xor r12, r12
xor r13, r13
xor r14, r14
xor r15, r15
;
; Far return into 32-bit mode
;
retfq
BITS 32
PmEntry:
mov eax, cr0
btr eax, 31 ; Clear CR0.PG
mov cr0, eax ; Disable paging and caches
mov ecx, 0xc0000080
rdmsr
and ah, ~ 1 ; Clear LME
wrmsr
mov eax, cr4
and al, ~ (1 << 5) ; Clear PAE
mov cr4, eax
pop edx
add esp, 4
pop ecx,
add esp, 4
MwaitCheck:
cmp cl, 1 ; Check mwait-monitor support
jnz HltLoop
mov rbx, rdx ; Save C-State to ebx
mov ebx, edx ; Save C-State to ebx
MwaitLoop:
cli
mov rax, rsp ; Set Monitor Address
mov eax, esp ; Set Monitor Address
xor ecx, ecx ; ecx = 0
xor edx, edx ; edx = 0
monitor
@@ -324,10 +402,49 @@ MwaitLoop:
jmp MwaitLoop
HltLoop:
pop edx ; PM16CodeSegment
add esp, 4
pop ebx ; WakeupBuffer
add esp, 4
pop eax ; SevEsAPJumpTable
add esp, 4
cmp eax, 0 ; Check for SEV-ES
je DoHlt
cli
;
; SEV-ES is enabled, use VMGEXIT (GHCB information already
; set by caller)
;
BITS 64
rep vmmcall
BITS 32
;
; Back from VMGEXIT AP_HLT_LOOP
; Push the FLAGS/CS/IP values to use
;
push word 0x0002 ; EFLAGS
xor ecx, ecx
mov cx, [eax + 2] ; CS
push cx
mov cx, [eax] ; IP
push cx
push word 0x0000 ; For alignment, will be discarded
push edx
push ebx
mov edx, esi ; Restore RDX reset value
retf
DoHlt:
cli
hlt
jmp HltLoop
jmp DoHlt
BITS 64
AsmRelocateApLoopEnd:
;-------------------------------------------------------------------------------------