diff --git a/ArmPlatformPkg/ArmPlatformPkg.dec b/ArmPlatformPkg/ArmPlatformPkg.dec
index dd6e78f62a..7b5d7e6cb5 100644
--- a/ArmPlatformPkg/ArmPlatformPkg.dec
+++ b/ArmPlatformPkg/ArmPlatformPkg.dec
@@ -38,10 +38,6 @@
#
LcdPlatformLib|Include/Library/LcdPlatformLib.h
- ## @libraryclass Provides a Nor flash interface.
- #
- NorFlashPlatformLib|Include/Library/NorFlashPlatformLib.h
-
## @libraryclass Provides an interface to the clock of a PL011 device.
#
PL011UartClockLib|Include/Library/PL011UartClockLib.h
@@ -56,8 +52,6 @@
[PcdsFeatureFlag.common]
gArmPlatformTokenSpaceGuid.PcdSendSgiToBringUpSecondaryCores|FALSE|BOOLEAN|0x00000004
- gArmPlatformTokenSpaceGuid.PcdNorFlashCheckBlockLocked|FALSE|BOOLEAN|0x0000003C
-
# Disable the GOP controller on ExitBootServices(). By default the value is FALSE,
# we assume the OS will handle the FrameBuffer from the UEFI GOP information.
gArmPlatformTokenSpaceGuid.PcdGopDisableOnExitBootServices|FALSE|BOOLEAN|0x0000003D
diff --git a/ArmPlatformPkg/ArmPlatformPkg.dsc b/ArmPlatformPkg/ArmPlatformPkg.dsc
index 661a4cea22..ddd128f9e6 100644
--- a/ArmPlatformPkg/ArmPlatformPkg.dsc
+++ b/ArmPlatformPkg/ArmPlatformPkg.dsc
@@ -55,7 +55,6 @@
LzmaDecompressLib|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
MemoryInitPeiLib|ArmPlatformPkg/MemoryInitPei/MemoryInitPeiLib.inf
- NorFlashPlatformLib|ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.inf
PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
PeCoffExtraActionLib|MdePkg/Library/BasePeCoffExtraActionLibNull/BasePeCoffExtraActionLibNull.inf
PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
@@ -100,7 +99,6 @@
[Components.common]
ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf
- ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
@@ -109,7 +107,6 @@
ArmPlatformPkg/Library/HdLcd/HdLcd.inf
ArmPlatformPkg/Library/LcdHwNullLib/LcdHwNullLib.inf
ArmPlatformPkg/Library/LcdPlatformNullLib/LcdPlatformNullLib.inf
- ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.inf
ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf
ArmPlatformPkg/Library/PL011UartClockLib/PL011UartClockLib.inf
ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.inf
@@ -130,6 +127,3 @@
ArmPlatformPkg/PrePi/PeiUniCore.inf
ArmPlatformPkg/Library/ArmMaliDp/ArmMaliDp.inf
-
-[Components.AARCH64]
- ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.inf
diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.c b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.c
deleted file mode 100644
index 1b431073ee..0000000000
--- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.c
+++ /dev/null
@@ -1,991 +0,0 @@
-/** @file NorFlash.c
-
- Copyright (c) 2011 - 2020, Arm Limited. All rights reserved.
- Copyright (c) 2020, Linaro, Ltd. All rights reserved.
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include
-
-#include "NorFlash.h"
-
-//
-// Global variable declarations
-//
-extern NOR_FLASH_INSTANCE **mNorFlashInstances;
-extern UINT32 mNorFlashDeviceCount;
-
-UINT32
-NorFlashReadStatusRegister (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN SR_Address
- )
-{
- // Prepare to read the status register
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_STATUS_REGISTER);
- return MmioRead32 (Instance->DeviceBaseAddress);
-}
-
-STATIC
-BOOLEAN
-NorFlashBlockIsLocked (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN BlockAddress
- )
-{
- UINT32 LockStatus;
-
- // Send command for reading device id
- SEND_NOR_COMMAND (BlockAddress, 2, P30_CMD_READ_DEVICE_ID);
-
- // Read block lock status
- LockStatus = MmioRead32 (CREATE_NOR_ADDRESS (BlockAddress, 2));
-
- // Decode block lock status
- LockStatus = FOLD_32BIT_INTO_16BIT (LockStatus);
-
- if ((LockStatus & 0x2) != 0) {
- DEBUG ((DEBUG_ERROR, "NorFlashBlockIsLocked: WARNING: Block LOCKED DOWN\n"));
- }
-
- return ((LockStatus & 0x1) != 0);
-}
-
-STATIC
-EFI_STATUS
-NorFlashUnlockSingleBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN BlockAddress
- )
-{
- UINT32 LockStatus;
-
- // Raise the Task Priority Level to TPL_NOTIFY to serialise all its operations
- // and to protect shared data structures.
-
- if (FeaturePcdGet (PcdNorFlashCheckBlockLocked) == TRUE) {
- do {
- // Request a lock setup
- SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_LOCK_BLOCK_SETUP);
-
- // Request an unlock
- SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_UNLOCK_BLOCK);
-
- // Send command for reading device id
- SEND_NOR_COMMAND (BlockAddress, 2, P30_CMD_READ_DEVICE_ID);
-
- // Read block lock status
- LockStatus = MmioRead32 (CREATE_NOR_ADDRESS (BlockAddress, 2));
-
- // Decode block lock status
- LockStatus = FOLD_32BIT_INTO_16BIT (LockStatus);
- } while ((LockStatus & 0x1) == 1);
- } else {
- // Request a lock setup
- SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_LOCK_BLOCK_SETUP);
-
- // Request an unlock
- SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_UNLOCK_BLOCK);
-
- // Wait until the status register gives us the all clear
- do {
- LockStatus = NorFlashReadStatusRegister (Instance, BlockAddress);
- } while ((LockStatus & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
- }
-
- // Put device back into Read Array mode
- SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_READ_ARRAY);
-
- DEBUG ((DEBUG_BLKIO, "UnlockSingleBlock: BlockAddress=0x%08x\n", BlockAddress));
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-NorFlashUnlockSingleBlockIfNecessary (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN BlockAddress
- )
-{
- EFI_STATUS Status;
-
- Status = EFI_SUCCESS;
-
- if (NorFlashBlockIsLocked (Instance, BlockAddress)) {
- Status = NorFlashUnlockSingleBlock (Instance, BlockAddress);
- }
-
- return Status;
-}
-
-/**
- * The following function presumes that the block has already been unlocked.
- **/
-EFI_STATUS
-NorFlashEraseSingleBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN BlockAddress
- )
-{
- EFI_STATUS Status;
- UINT32 StatusRegister;
-
- Status = EFI_SUCCESS;
-
- // Request a block erase and then confirm it
- SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_BLOCK_ERASE_SETUP);
- SEND_NOR_COMMAND (BlockAddress, 0, P30_CMD_BLOCK_ERASE_CONFIRM);
-
- // Wait until the status register gives us the all clear
- do {
- StatusRegister = NorFlashReadStatusRegister (Instance, BlockAddress);
- } while ((StatusRegister & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
-
- if (StatusRegister & P30_SR_BIT_VPP) {
- DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: VPP Range Error\n", BlockAddress));
- Status = EFI_DEVICE_ERROR;
- }
-
- if ((StatusRegister & (P30_SR_BIT_ERASE | P30_SR_BIT_PROGRAM)) == (P30_SR_BIT_ERASE | P30_SR_BIT_PROGRAM)) {
- DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: Command Sequence Error\n", BlockAddress));
- Status = EFI_DEVICE_ERROR;
- }
-
- if (StatusRegister & P30_SR_BIT_ERASE) {
- DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: Block Erase Error StatusRegister:0x%X\n", BlockAddress, StatusRegister));
- Status = EFI_DEVICE_ERROR;
- }
-
- if (StatusRegister & P30_SR_BIT_BLOCK_LOCKED) {
- // The debug level message has been reduced because a device lock might happen. In this case we just retry it ...
- DEBUG ((DEBUG_INFO, "EraseSingleBlock(BlockAddress=0x%08x: Block Locked Error\n", BlockAddress));
- Status = EFI_WRITE_PROTECTED;
- }
-
- if (EFI_ERROR (Status)) {
- // Clear the Status Register
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_CLEAR_STATUS_REGISTER);
- }
-
- // Put device back into Read Array mode
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
-
- return Status;
-}
-
-EFI_STATUS
-NorFlashWriteSingleWord (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN WordAddress,
- IN UINT32 WriteData
- )
-{
- EFI_STATUS Status;
- UINT32 StatusRegister;
-
- Status = EFI_SUCCESS;
-
- // Request a write single word command
- SEND_NOR_COMMAND (WordAddress, 0, P30_CMD_WORD_PROGRAM_SETUP);
-
- // Store the word into NOR Flash;
- MmioWrite32 (WordAddress, WriteData);
-
- // Wait for the write to complete and then check for any errors; i.e. check the Status Register
- do {
- // Prepare to read the status register
- StatusRegister = NorFlashReadStatusRegister (Instance, WordAddress);
- // The chip is busy while the WRITE bit is not asserted
- } while ((StatusRegister & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
-
- // Perform a full status check:
- // Mask the relevant bits of Status Register.
- // Everything should be zero, if not, we have a problem
-
- if (StatusRegister & P30_SR_BIT_VPP) {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleWord(WordAddress:0x%X): VPP Range Error\n", WordAddress));
- Status = EFI_DEVICE_ERROR;
- }
-
- if (StatusRegister & P30_SR_BIT_PROGRAM) {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleWord(WordAddress:0x%X): Program Error\n", WordAddress));
- Status = EFI_DEVICE_ERROR;
- }
-
- if (StatusRegister & P30_SR_BIT_BLOCK_LOCKED) {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleWord(WordAddress:0x%X): Device Protect Error\n", WordAddress));
- Status = EFI_DEVICE_ERROR;
- }
-
- if (!EFI_ERROR (Status)) {
- // Clear the Status Register
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_CLEAR_STATUS_REGISTER);
- }
-
- // Put device back into Read Array mode
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
-
- return Status;
-}
-
-/*
- * Writes data to the NOR Flash using the Buffered Programming method.
- *
- * The maximum size of the on-chip buffer is 32-words, because of hardware restrictions.
- * Therefore this function will only handle buffers up to 32 words or 128 bytes.
- * To deal with larger buffers, call this function again.
- *
- * This function presumes that both the TargetAddress and the TargetAddress+BufferSize
- * exist entirely within the NOR Flash. Therefore these conditions will not be checked here.
- *
- * In buffered programming, if the target address not at the beginning of a 32-bit word boundary,
- * then programming time is doubled and power consumption is increased.
- * Therefore, it is a requirement to align buffer writes to 32-bit word boundaries.
- * i.e. the last 4 bits of the target start address must be zero: 0x......00
- */
-EFI_STATUS
-NorFlashWriteBuffer (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN TargetAddress,
- IN UINTN BufferSizeInBytes,
- IN UINT32 *Buffer
- )
-{
- EFI_STATUS Status;
- UINTN BufferSizeInWords;
- UINTN Count;
- volatile UINT32 *Data;
- UINTN WaitForBuffer;
- BOOLEAN BufferAvailable;
- UINT32 StatusRegister;
-
- WaitForBuffer = MAX_BUFFERED_PROG_ITERATIONS;
- BufferAvailable = FALSE;
-
- // Check that the target address does not cross a 32-word boundary.
- if ((TargetAddress & BOUNDARY_OF_32_WORDS) != 0) {
- return EFI_INVALID_PARAMETER;
- }
-
- // Check there are some data to program
- if (BufferSizeInBytes == 0) {
- return EFI_BUFFER_TOO_SMALL;
- }
-
- // Check that the buffer size does not exceed the maximum hardware buffer size on chip.
- if (BufferSizeInBytes > P30_MAX_BUFFER_SIZE_IN_BYTES) {
- return EFI_BAD_BUFFER_SIZE;
- }
-
- // Check that the buffer size is a multiple of 32-bit words
- if ((BufferSizeInBytes % 4) != 0) {
- return EFI_BAD_BUFFER_SIZE;
- }
-
- // Pre-programming conditions checked, now start the algorithm.
-
- // Prepare the data destination address
- Data = (UINT32 *)TargetAddress;
-
- // Check the availability of the buffer
- do {
- // Issue the Buffered Program Setup command
- SEND_NOR_COMMAND (TargetAddress, 0, P30_CMD_BUFFERED_PROGRAM_SETUP);
-
- // Read back the status register bit#7 from the same address
- if (((*Data) & P30_SR_BIT_WRITE) == P30_SR_BIT_WRITE) {
- BufferAvailable = TRUE;
- }
-
- // Update the loop counter
- WaitForBuffer--;
- } while ((WaitForBuffer > 0) && (BufferAvailable == FALSE));
-
- // The buffer was not available for writing
- if (WaitForBuffer == 0) {
- Status = EFI_DEVICE_ERROR;
- goto EXIT;
- }
-
- // From now on we work in 32-bit words
- BufferSizeInWords = BufferSizeInBytes / (UINTN)4;
-
- // Write the word count, which is (buffer_size_in_words - 1),
- // because word count 0 means one word.
- SEND_NOR_COMMAND (TargetAddress, 0, (BufferSizeInWords - 1));
-
- // Write the data to the NOR Flash, advancing each address by 4 bytes
- for (Count = 0; Count < BufferSizeInWords; Count++, Data++, Buffer++) {
- MmioWrite32 ((UINTN)Data, *Buffer);
- }
-
- // Issue the Buffered Program Confirm command, to start the programming operation
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_BUFFERED_PROGRAM_CONFIRM);
-
- // Wait for the write to complete and then check for any errors; i.e. check the Status Register
- do {
- StatusRegister = NorFlashReadStatusRegister (Instance, TargetAddress);
- // The chip is busy while the WRITE bit is not asserted
- } while ((StatusRegister & P30_SR_BIT_WRITE) != P30_SR_BIT_WRITE);
-
- // Perform a full status check:
- // Mask the relevant bits of Status Register.
- // Everything should be zero, if not, we have a problem
-
- Status = EFI_SUCCESS;
-
- if (StatusRegister & P30_SR_BIT_VPP) {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteBuffer(TargetAddress:0x%X): VPP Range Error\n", TargetAddress));
- Status = EFI_DEVICE_ERROR;
- }
-
- if (StatusRegister & P30_SR_BIT_PROGRAM) {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteBuffer(TargetAddress:0x%X): Program Error\n", TargetAddress));
- Status = EFI_DEVICE_ERROR;
- }
-
- if (StatusRegister & P30_SR_BIT_BLOCK_LOCKED) {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteBuffer(TargetAddress:0x%X): Device Protect Error\n", TargetAddress));
- Status = EFI_DEVICE_ERROR;
- }
-
- if (!EFI_ERROR (Status)) {
- // Clear the Status Register
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_CLEAR_STATUS_REGISTER);
- }
-
-EXIT:
- // Put device back into Read Array mode
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
-
- return Status;
-}
-
-EFI_STATUS
-NorFlashWriteBlocks (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINTN BufferSizeInBytes,
- IN VOID *Buffer
- )
-{
- UINT32 *pWriteBuffer;
- EFI_STATUS Status;
- EFI_LBA CurrentBlock;
- UINT32 BlockSizeInWords;
- UINT32 NumBlocks;
- UINT32 BlockCount;
-
- Status = EFI_SUCCESS;
-
- // The buffer must be valid
- if (Buffer == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (Instance->Media.ReadOnly == TRUE) {
- return EFI_WRITE_PROTECTED;
- }
-
- // We must have some bytes to read
- DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: BufferSizeInBytes=0x%x\n", BufferSizeInBytes));
- if (BufferSizeInBytes == 0) {
- return EFI_BAD_BUFFER_SIZE;
- }
-
- // The size of the buffer must be a multiple of the block size
- DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: BlockSize in bytes =0x%x\n", Instance->Media.BlockSize));
- if ((BufferSizeInBytes % Instance->Media.BlockSize) != 0) {
- return EFI_BAD_BUFFER_SIZE;
- }
-
- // All blocks must be within the device
- NumBlocks = ((UINT32)BufferSizeInBytes) / Instance->Media.BlockSize;
-
- DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: NumBlocks=%d, LastBlock=%ld, Lba=%ld.\n", NumBlocks, Instance->Media.LastBlock, Lba));
-
- if ((Lba + NumBlocks) > (Instance->Media.LastBlock + 1)) {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteBlocks: ERROR - Write will exceed last block.\n"));
- return EFI_INVALID_PARAMETER;
- }
-
- BlockSizeInWords = Instance->Media.BlockSize / 4;
-
- // Because the target *Buffer is a pointer to VOID, we must put all the data into a pointer
- // to a proper data type, so use *ReadBuffer
- pWriteBuffer = (UINT32 *)Buffer;
-
- CurrentBlock = Lba;
- for (BlockCount = 0; BlockCount < NumBlocks; BlockCount++, CurrentBlock++, pWriteBuffer = pWriteBuffer + BlockSizeInWords) {
- DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: Writing block #%d\n", (UINTN)CurrentBlock));
-
- Status = NorFlashWriteFullBlock (Instance, CurrentBlock, pWriteBuffer, BlockSizeInWords);
-
- if (EFI_ERROR (Status)) {
- break;
- }
- }
-
- DEBUG ((DEBUG_BLKIO, "NorFlashWriteBlocks: Exit Status = \"%r\".\n", Status));
- return Status;
-}
-
-#define BOTH_ALIGNED(a, b, align) ((((UINTN)(a) | (UINTN)(b)) & ((align) - 1)) == 0)
-
-/**
- Copy Length bytes from Source to Destination, using aligned accesses only.
- Note that this implementation uses memcpy() semantics rather then memmove()
- semantics, i.e., SourceBuffer and DestinationBuffer should not overlap.
-
- @param DestinationBuffer The target of the copy request.
- @param SourceBuffer The place to copy from.
- @param Length The number of bytes to copy.
-
- @return Destination
-
-**/
-STATIC
-VOID *
-AlignedCopyMem (
- OUT VOID *DestinationBuffer,
- IN CONST VOID *SourceBuffer,
- IN UINTN Length
- )
-{
- UINT8 *Destination8;
- CONST UINT8 *Source8;
- UINT32 *Destination32;
- CONST UINT32 *Source32;
- UINT64 *Destination64;
- CONST UINT64 *Source64;
-
- if (BOTH_ALIGNED (DestinationBuffer, SourceBuffer, 8) && (Length >= 8)) {
- Destination64 = DestinationBuffer;
- Source64 = SourceBuffer;
- while (Length >= 8) {
- *Destination64++ = *Source64++;
- Length -= 8;
- }
-
- Destination8 = (UINT8 *)Destination64;
- Source8 = (CONST UINT8 *)Source64;
- } else if (BOTH_ALIGNED (DestinationBuffer, SourceBuffer, 4) && (Length >= 4)) {
- Destination32 = DestinationBuffer;
- Source32 = SourceBuffer;
- while (Length >= 4) {
- *Destination32++ = *Source32++;
- Length -= 4;
- }
-
- Destination8 = (UINT8 *)Destination32;
- Source8 = (CONST UINT8 *)Source32;
- } else {
- Destination8 = DestinationBuffer;
- Source8 = SourceBuffer;
- }
-
- while (Length-- != 0) {
- *Destination8++ = *Source8++;
- }
-
- return DestinationBuffer;
-}
-
-EFI_STATUS
-NorFlashReadBlocks (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINTN BufferSizeInBytes,
- OUT VOID *Buffer
- )
-{
- UINT32 NumBlocks;
- UINTN StartAddress;
-
- DEBUG ((
- DEBUG_BLKIO,
- "NorFlashReadBlocks: BufferSize=0x%xB BlockSize=0x%xB LastBlock=%ld, Lba=%ld.\n",
- BufferSizeInBytes,
- Instance->Media.BlockSize,
- Instance->Media.LastBlock,
- Lba
- ));
-
- // The buffer must be valid
- if (Buffer == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- // Return if we have not any byte to read
- if (BufferSizeInBytes == 0) {
- return EFI_SUCCESS;
- }
-
- // The size of the buffer must be a multiple of the block size
- if ((BufferSizeInBytes % Instance->Media.BlockSize) != 0) {
- return EFI_BAD_BUFFER_SIZE;
- }
-
- // All blocks must be within the device
- NumBlocks = ((UINT32)BufferSizeInBytes) / Instance->Media.BlockSize;
-
- if ((Lba + NumBlocks) > (Instance->Media.LastBlock + 1)) {
- DEBUG ((DEBUG_ERROR, "NorFlashReadBlocks: ERROR - Read will exceed last block\n"));
- return EFI_INVALID_PARAMETER;
- }
-
- // Get the address to start reading from
- StartAddress = GET_NOR_BLOCK_ADDRESS (
- Instance->RegionBaseAddress,
- Lba,
- Instance->Media.BlockSize
- );
-
- // Put the device into Read Array mode
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
-
- // Readout the data
- AlignedCopyMem (Buffer, (VOID *)StartAddress, BufferSizeInBytes);
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-NorFlashRead (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINTN Offset,
- IN UINTN BufferSizeInBytes,
- OUT VOID *Buffer
- )
-{
- UINTN StartAddress;
-
- // The buffer must be valid
- if (Buffer == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- // Return if we have not any byte to read
- if (BufferSizeInBytes == 0) {
- return EFI_SUCCESS;
- }
-
- if (((Lba * Instance->Media.BlockSize) + Offset + BufferSizeInBytes) > Instance->Size) {
- DEBUG ((DEBUG_ERROR, "NorFlashRead: ERROR - Read will exceed device size.\n"));
- return EFI_INVALID_PARAMETER;
- }
-
- // Get the address to start reading from
- StartAddress = GET_NOR_BLOCK_ADDRESS (
- Instance->RegionBaseAddress,
- Lba,
- Instance->Media.BlockSize
- );
-
- // Put the device into Read Array mode
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
-
- // Readout the data
- AlignedCopyMem (Buffer, (VOID *)(StartAddress + Offset), BufferSizeInBytes);
-
- return EFI_SUCCESS;
-}
-
-/*
- Write a full or portion of a block. It must not span block boundaries; that is,
- Offset + *NumBytes <= Instance->Media.BlockSize.
-*/
-EFI_STATUS
-NorFlashWriteSingleBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINTN Offset,
- IN OUT UINTN *NumBytes,
- IN UINT8 *Buffer
- )
-{
- EFI_STATUS TempStatus;
- UINT32 Tmp;
- UINT32 TmpBuf;
- UINT32 WordToWrite;
- UINT32 Mask;
- BOOLEAN DoErase;
- UINTN BytesToWrite;
- UINTN CurOffset;
- UINTN WordAddr;
- UINTN BlockSize;
- UINTN BlockAddress;
- UINTN PrevBlockAddress;
-
- PrevBlockAddress = 0;
-
- DEBUG ((DEBUG_BLKIO, "NorFlashWriteSingleBlock(Parameters: Lba=%ld, Offset=0x%x, *NumBytes=0x%x, Buffer @ 0x%08x)\n", Lba, Offset, *NumBytes, Buffer));
-
- // Detect WriteDisabled state
- if (Instance->Media.ReadOnly == TRUE) {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleBlock: ERROR - Can not write: Device is in WriteDisabled state.\n"));
- // It is in WriteDisabled state, return an error right away
- return EFI_ACCESS_DENIED;
- }
-
- // Cache the block size to avoid de-referencing pointers all the time
- BlockSize = Instance->Media.BlockSize;
-
- // The write must not span block boundaries.
- // We need to check each variable individually because adding two large values together overflows.
- if ((Offset >= BlockSize) ||
- (*NumBytes > BlockSize) ||
- ((Offset + *NumBytes) > BlockSize))
- {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleBlock: ERROR - EFI_BAD_BUFFER_SIZE: (Offset=0x%x + NumBytes=0x%x) > BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
- return EFI_BAD_BUFFER_SIZE;
- }
-
- // We must have some bytes to write
- if (*NumBytes == 0) {
- DEBUG ((DEBUG_ERROR, "NorFlashWriteSingleBlock: ERROR - EFI_BAD_BUFFER_SIZE: (Offset=0x%x + NumBytes=0x%x) > BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
- return EFI_BAD_BUFFER_SIZE;
- }
-
- // Pick 128bytes as a good start for word operations as opposed to erasing the
- // block and writing the data regardless if an erase is really needed.
- // It looks like most individual NV variable writes are smaller than 128bytes.
- if (*NumBytes <= 128) {
- // Check to see if we need to erase before programming the data into NOR.
- // If the destination bits are only changing from 1s to 0s we can just write.
- // After a block is erased all bits in the block is set to 1.
- // If any byte requires us to erase we just give up and rewrite all of it.
- DoErase = FALSE;
- BytesToWrite = *NumBytes;
- CurOffset = Offset;
-
- while (BytesToWrite > 0) {
- // Read full word from NOR, splice as required. A word is the smallest
- // unit we can write.
- TempStatus = NorFlashRead (Instance, Lba, CurOffset & ~(0x3), sizeof (Tmp), &Tmp);
- if (EFI_ERROR (TempStatus)) {
- return EFI_DEVICE_ERROR;
- }
-
- // Physical address of word in NOR to write.
- WordAddr = (CurOffset & ~(0x3)) + GET_NOR_BLOCK_ADDRESS (
- Instance->RegionBaseAddress,
- Lba,
- BlockSize
- );
- // The word of data that is to be written.
- TmpBuf = *((UINT32 *)(Buffer + (*NumBytes - BytesToWrite)));
-
- // First do word aligned chunks.
- if ((CurOffset & 0x3) == 0) {
- if (BytesToWrite >= 4) {
- // Is the destination still in 'erased' state?
- if (~Tmp != 0) {
- // Check to see if we are only changing bits to zero.
- if ((Tmp ^ TmpBuf) & TmpBuf) {
- DoErase = TRUE;
- break;
- }
- }
-
- // Write this word to NOR
- WordToWrite = TmpBuf;
- CurOffset += sizeof (TmpBuf);
- BytesToWrite -= sizeof (TmpBuf);
- } else {
- // BytesToWrite < 4. Do small writes and left-overs
- Mask = ~((~0) << (BytesToWrite * 8));
- // Mask out the bytes we want.
- TmpBuf &= Mask;
- // Is the destination still in 'erased' state?
- if ((Tmp & Mask) != Mask) {
- // Check to see if we are only changing bits to zero.
- if ((Tmp ^ TmpBuf) & TmpBuf) {
- DoErase = TRUE;
- break;
- }
- }
-
- // Merge old and new data. Write merged word to NOR
- WordToWrite = (Tmp & ~Mask) | TmpBuf;
- CurOffset += BytesToWrite;
- BytesToWrite = 0;
- }
- } else {
- // Do multiple words, but starting unaligned.
- if (BytesToWrite > (4 - (CurOffset & 0x3))) {
- Mask = ((~0) << ((CurOffset & 0x3) * 8));
- // Mask out the bytes we want.
- TmpBuf &= Mask;
- // Is the destination still in 'erased' state?
- if ((Tmp & Mask) != Mask) {
- // Check to see if we are only changing bits to zero.
- if ((Tmp ^ TmpBuf) & TmpBuf) {
- DoErase = TRUE;
- break;
- }
- }
-
- // Merge old and new data. Write merged word to NOR
- WordToWrite = (Tmp & ~Mask) | TmpBuf;
- BytesToWrite -= (4 - (CurOffset & 0x3));
- CurOffset += (4 - (CurOffset & 0x3));
- } else {
- // Unaligned and fits in one word.
- Mask = (~((~0) << (BytesToWrite * 8))) << ((CurOffset & 0x3) * 8);
- // Mask out the bytes we want.
- TmpBuf = (TmpBuf << ((CurOffset & 0x3) * 8)) & Mask;
- // Is the destination still in 'erased' state?
- if ((Tmp & Mask) != Mask) {
- // Check to see if we are only changing bits to zero.
- if ((Tmp ^ TmpBuf) & TmpBuf) {
- DoErase = TRUE;
- break;
- }
- }
-
- // Merge old and new data. Write merged word to NOR
- WordToWrite = (Tmp & ~Mask) | TmpBuf;
- CurOffset += BytesToWrite;
- BytesToWrite = 0;
- }
- }
-
- //
- // Write the word to NOR.
- //
-
- BlockAddress = GET_NOR_BLOCK_ADDRESS (Instance->RegionBaseAddress, Lba, BlockSize);
- if (BlockAddress != PrevBlockAddress) {
- TempStatus = NorFlashUnlockSingleBlockIfNecessary (Instance, BlockAddress);
- if (EFI_ERROR (TempStatus)) {
- return EFI_DEVICE_ERROR;
- }
-
- PrevBlockAddress = BlockAddress;
- }
-
- TempStatus = NorFlashWriteSingleWord (Instance, WordAddr, WordToWrite);
- if (EFI_ERROR (TempStatus)) {
- return EFI_DEVICE_ERROR;
- }
- }
-
- // Exit if we got here and could write all the data. Otherwise do the
- // Erase-Write cycle.
- if (!DoErase) {
- return EFI_SUCCESS;
- }
- }
-
- // Check we did get some memory. Buffer is BlockSize.
- if (Instance->ShadowBuffer == NULL) {
- DEBUG ((DEBUG_ERROR, "FvbWrite: ERROR - Buffer not ready\n"));
- return EFI_DEVICE_ERROR;
- }
-
- // Read NOR Flash data into shadow buffer
- TempStatus = NorFlashReadBlocks (Instance, Lba, BlockSize, Instance->ShadowBuffer);
- if (EFI_ERROR (TempStatus)) {
- // Return one of the pre-approved error statuses
- return EFI_DEVICE_ERROR;
- }
-
- // Put the data at the appropriate location inside the buffer area
- CopyMem ((VOID *)((UINTN)Instance->ShadowBuffer + Offset), Buffer, *NumBytes);
-
- // Write the modified buffer back to the NorFlash
- TempStatus = NorFlashWriteBlocks (Instance, Lba, BlockSize, Instance->ShadowBuffer);
- if (EFI_ERROR (TempStatus)) {
- // Return one of the pre-approved error statuses
- return EFI_DEVICE_ERROR;
- }
-
- return EFI_SUCCESS;
-}
-
-/*
- Although DiskIoDxe will automatically install the DiskIO protocol whenever
- we install the BlockIO protocol, its implementation is sub-optimal as it reads
- and writes entire blocks using the BlockIO protocol. In fact we can access
- NOR flash with a finer granularity than that, so we can improve performance
- by directly producing the DiskIO protocol.
-*/
-
-/**
- Read BufferSize bytes from Offset into Buffer.
-
- @param This Protocol instance pointer.
- @param MediaId Id of the media, changes every time the media is replaced.
- @param Offset The starting byte offset to read from
- @param BufferSize Size of Buffer
- @param Buffer Buffer containing read data
-
- @retval EFI_SUCCESS The data was read correctly from the device.
- @retval EFI_DEVICE_ERROR The device reported an error while performing the read.
- @retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
- @retval EFI_INVALID_PARAMETER The read request contains device addresses that are not
- valid for the device.
-
-**/
-EFI_STATUS
-EFIAPI
-NorFlashDiskIoReadDisk (
- IN EFI_DISK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 DiskOffset,
- IN UINTN BufferSize,
- OUT VOID *Buffer
- )
-{
- NOR_FLASH_INSTANCE *Instance;
- UINT32 BlockSize;
- UINT32 BlockOffset;
- EFI_LBA Lba;
-
- Instance = INSTANCE_FROM_DISKIO_THIS (This);
-
- if (MediaId != Instance->Media.MediaId) {
- return EFI_MEDIA_CHANGED;
- }
-
- BlockSize = Instance->Media.BlockSize;
- Lba = (EFI_LBA)DivU64x32Remainder (DiskOffset, BlockSize, &BlockOffset);
-
- return NorFlashRead (Instance, Lba, BlockOffset, BufferSize, Buffer);
-}
-
-/**
- Writes a specified number of bytes to a device.
-
- @param This Indicates a pointer to the calling context.
- @param MediaId ID of the medium to be written.
- @param Offset The starting byte offset on the logical block I/O device to write.
- @param BufferSize The size in bytes of Buffer. The number of bytes to write to the device.
- @param Buffer A pointer to the buffer containing the data to be written.
-
- @retval EFI_SUCCESS The data was written correctly to the device.
- @retval EFI_WRITE_PROTECTED The device can not be written to.
- @retval EFI_DEVICE_ERROR The device reported an error while performing the write.
- @retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
- @retval EFI_INVALID_PARAMETER The write request contains device addresses that are not
- valid for the device.
-
-**/
-EFI_STATUS
-EFIAPI
-NorFlashDiskIoWriteDisk (
- IN EFI_DISK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 DiskOffset,
- IN UINTN BufferSize,
- IN VOID *Buffer
- )
-{
- NOR_FLASH_INSTANCE *Instance;
- UINT32 BlockSize;
- UINT32 BlockOffset;
- EFI_LBA Lba;
- UINTN RemainingBytes;
- UINTN WriteSize;
- EFI_STATUS Status;
-
- Instance = INSTANCE_FROM_DISKIO_THIS (This);
-
- if (MediaId != Instance->Media.MediaId) {
- return EFI_MEDIA_CHANGED;
- }
-
- BlockSize = Instance->Media.BlockSize;
- Lba = (EFI_LBA)DivU64x32Remainder (DiskOffset, BlockSize, &BlockOffset);
-
- RemainingBytes = BufferSize;
-
- // Write either all the remaining bytes, or the number of bytes that bring
- // us up to a block boundary, whichever is less.
- // (DiskOffset | (BlockSize - 1)) + 1) rounds DiskOffset up to the next
- // block boundary (even if it is already on one).
- WriteSize = MIN (RemainingBytes, ((DiskOffset | (BlockSize - 1)) + 1) - DiskOffset);
-
- do {
- if (WriteSize == BlockSize) {
- // Write a full block
- Status = NorFlashWriteFullBlock (Instance, Lba, Buffer, BlockSize / sizeof (UINT32));
- } else {
- // Write a partial block
- Status = NorFlashWriteSingleBlock (Instance, Lba, BlockOffset, &WriteSize, Buffer);
- }
-
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- // Now continue writing either all the remaining bytes or single blocks.
- RemainingBytes -= WriteSize;
- Buffer = (UINT8 *)Buffer + WriteSize;
- Lba++;
- BlockOffset = 0;
- WriteSize = MIN (RemainingBytes, BlockSize);
- } while (RemainingBytes);
-
- return Status;
-}
-
-EFI_STATUS
-NorFlashReset (
- IN NOR_FLASH_INSTANCE *Instance
- )
-{
- // As there is no specific RESET to perform, ensure that the devices is in the default Read Array mode
- SEND_NOR_COMMAND (Instance->DeviceBaseAddress, 0, P30_CMD_READ_ARRAY);
- return EFI_SUCCESS;
-}
-
-/**
- Fixup internal data so that EFI can be call in virtual mode.
- Call the passed in Child Notify event and convert any pointers in
- lib to virtual mode.
-
- @param[in] Event The Event that is being processed
- @param[in] Context Event Context
-**/
-VOID
-EFIAPI
-NorFlashVirtualNotifyEvent (
- IN EFI_EVENT Event,
- IN VOID *Context
- )
-{
- UINTN Index;
-
- for (Index = 0; Index < mNorFlashDeviceCount; Index++) {
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->DeviceBaseAddress);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->RegionBaseAddress);
-
- // Convert BlockIo protocol
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.FlushBlocks);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.ReadBlocks);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.Reset);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->BlockIoProtocol.WriteBlocks);
-
- // Convert Fvb
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.EraseBlocks);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.GetAttributes);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.GetBlockSize);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.GetPhysicalAddress);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.Read);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.SetAttributes);
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->FvbProtocol.Write);
-
- if (mNorFlashInstances[Index]->ShadowBuffer != NULL) {
- EfiConvertPointer (0x0, (VOID **)&mNorFlashInstances[Index]->ShadowBuffer);
- }
- }
-
- return;
-}
diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.h b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.h
deleted file mode 100644
index c83032e87d..0000000000
--- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlash.h
+++ /dev/null
@@ -1,422 +0,0 @@
-/** @file NorFlash.h
-
- Copyright (c) 2011 - 2014, ARM Ltd. All rights reserved.
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef __NOR_FLASH_H__
-#define __NOR_FLASH_H__
-
-#include
-#include
-
-#include
-
-#include
-#include
-#include
-
-#include
-#include
-#include
-#include
-#include
-
-#define NOR_FLASH_ERASE_RETRY 10
-
-// Device access macros
-// These are necessary because we use 2 x 16bit parts to make up 32bit data
-
-#define HIGH_16_BITS 0xFFFF0000
-#define LOW_16_BITS 0x0000FFFF
-#define LOW_8_BITS 0x000000FF
-
-#define FOLD_32BIT_INTO_16BIT(value) ( ( value >> 16 ) | ( value & LOW_16_BITS ) )
-
-#define GET_LOW_BYTE(value) ( value & LOW_8_BITS )
-#define GET_HIGH_BYTE(value) ( GET_LOW_BYTE( value >> 16 ) )
-
-// Each command must be sent simultaneously to both chips,
-// i.e. at the lower 16 bits AND at the higher 16 bits
-#define CREATE_NOR_ADDRESS(BaseAddr, OffsetAddr) ((BaseAddr) + ((OffsetAddr) << 2))
-#define CREATE_DUAL_CMD(Cmd) ( ( Cmd << 16) | ( Cmd & LOW_16_BITS) )
-#define SEND_NOR_COMMAND(BaseAddr, Offset, Cmd) MmioWrite32 (CREATE_NOR_ADDRESS(BaseAddr,Offset), CREATE_DUAL_CMD(Cmd))
-#define GET_NOR_BLOCK_ADDRESS(BaseAddr, Lba, LbaSize) ( BaseAddr + (UINTN)((Lba) * LbaSize) )
-
-// Status Register Bits
-#define P30_SR_BIT_WRITE (BIT7 << 16 | BIT7)
-#define P30_SR_BIT_ERASE_SUSPEND (BIT6 << 16 | BIT6)
-#define P30_SR_BIT_ERASE (BIT5 << 16 | BIT5)
-#define P30_SR_BIT_PROGRAM (BIT4 << 16 | BIT4)
-#define P30_SR_BIT_VPP (BIT3 << 16 | BIT3)
-#define P30_SR_BIT_PROGRAM_SUSPEND (BIT2 << 16 | BIT2)
-#define P30_SR_BIT_BLOCK_LOCKED (BIT1 << 16 | BIT1)
-#define P30_SR_BIT_BEFP (BIT0 << 16 | BIT0)
-
-// Device Commands for Intel StrataFlash(R) Embedded Memory (P30) Family
-
-// On chip buffer size for buffered programming operations
-// There are 2 chips, each chip can buffer up to 32 (16-bit)words, and each word is 2 bytes.
-// Therefore the total size of the buffer is 2 x 32 x 2 = 128 bytes
-#define P30_MAX_BUFFER_SIZE_IN_BYTES ((UINTN)128)
-#define P30_MAX_BUFFER_SIZE_IN_WORDS (P30_MAX_BUFFER_SIZE_IN_BYTES/((UINTN)4))
-#define MAX_BUFFERED_PROG_ITERATIONS 10000000
-#define BOUNDARY_OF_32_WORDS 0x7F
-
-// CFI Addresses
-#define P30_CFI_ADDR_QUERY_UNIQUE_QRY 0x10
-#define P30_CFI_ADDR_VENDOR_ID 0x13
-
-// CFI Data
-#define CFI_QRY 0x00595251
-
-// READ Commands
-#define P30_CMD_READ_DEVICE_ID 0x0090
-#define P30_CMD_READ_STATUS_REGISTER 0x0070
-#define P30_CMD_CLEAR_STATUS_REGISTER 0x0050
-#define P30_CMD_READ_ARRAY 0x00FF
-#define P30_CMD_READ_CFI_QUERY 0x0098
-
-// WRITE Commands
-#define P30_CMD_WORD_PROGRAM_SETUP 0x0040
-#define P30_CMD_ALTERNATE_WORD_PROGRAM_SETUP 0x0010
-#define P30_CMD_BUFFERED_PROGRAM_SETUP 0x00E8
-#define P30_CMD_BUFFERED_PROGRAM_CONFIRM 0x00D0
-#define P30_CMD_BEFP_SETUP 0x0080
-#define P30_CMD_BEFP_CONFIRM 0x00D0
-
-// ERASE Commands
-#define P30_CMD_BLOCK_ERASE_SETUP 0x0020
-#define P30_CMD_BLOCK_ERASE_CONFIRM 0x00D0
-
-// SUSPEND Commands
-#define P30_CMD_PROGRAM_OR_ERASE_SUSPEND 0x00B0
-#define P30_CMD_SUSPEND_RESUME 0x00D0
-
-// BLOCK LOCKING / UNLOCKING Commands
-#define P30_CMD_LOCK_BLOCK_SETUP 0x0060
-#define P30_CMD_LOCK_BLOCK 0x0001
-#define P30_CMD_UNLOCK_BLOCK 0x00D0
-#define P30_CMD_LOCK_DOWN_BLOCK 0x002F
-
-// PROTECTION Commands
-#define P30_CMD_PROGRAM_PROTECTION_REGISTER_SETUP 0x00C0
-
-// CONFIGURATION Commands
-#define P30_CMD_READ_CONFIGURATION_REGISTER_SETUP 0x0060
-#define P30_CMD_READ_CONFIGURATION_REGISTER 0x0003
-
-#define NOR_FLASH_SIGNATURE SIGNATURE_32('n', 'o', 'r', '0')
-#define INSTANCE_FROM_FVB_THIS(a) CR(a, NOR_FLASH_INSTANCE, FvbProtocol, NOR_FLASH_SIGNATURE)
-#define INSTANCE_FROM_BLKIO_THIS(a) CR(a, NOR_FLASH_INSTANCE, BlockIoProtocol, NOR_FLASH_SIGNATURE)
-#define INSTANCE_FROM_DISKIO_THIS(a) CR(a, NOR_FLASH_INSTANCE, DiskIoProtocol, NOR_FLASH_SIGNATURE)
-
-typedef struct _NOR_FLASH_INSTANCE NOR_FLASH_INSTANCE;
-
-#pragma pack (1)
-typedef struct {
- VENDOR_DEVICE_PATH Vendor;
- UINT8 Index;
- EFI_DEVICE_PATH_PROTOCOL End;
-} NOR_FLASH_DEVICE_PATH;
-#pragma pack ()
-
-struct _NOR_FLASH_INSTANCE {
- UINT32 Signature;
- EFI_HANDLE Handle;
-
- UINTN DeviceBaseAddress;
- UINTN RegionBaseAddress;
- UINTN Size;
- EFI_LBA StartLba;
-
- EFI_BLOCK_IO_PROTOCOL BlockIoProtocol;
- EFI_BLOCK_IO_MEDIA Media;
- EFI_DISK_IO_PROTOCOL DiskIoProtocol;
-
- EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL FvbProtocol;
- VOID *ShadowBuffer;
-
- NOR_FLASH_DEVICE_PATH DevicePath;
-};
-
-EFI_STATUS
-NorFlashReadCfiData (
- IN UINTN DeviceBaseAddress,
- IN UINTN CFI_Offset,
- IN UINT32 NumberOfBytes,
- OUT UINT32 *Data
- );
-
-EFI_STATUS
-NorFlashWriteBuffer (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN TargetAddress,
- IN UINTN BufferSizeInBytes,
- IN UINT32 *Buffer
- );
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.Reset
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoReset (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN BOOLEAN ExtendedVerification
- );
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.ReadBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoReadBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN EFI_LBA Lba,
- IN UINTN BufferSizeInBytes,
- OUT VOID *Buffer
- );
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.WriteBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoWriteBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN EFI_LBA Lba,
- IN UINTN BufferSizeInBytes,
- IN VOID *Buffer
- );
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.FlushBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoFlushBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This
- );
-
-//
-// DiskIO Protocol function EFI_DISK_IO_PROTOCOL.ReadDisk
-//
-EFI_STATUS
-EFIAPI
-NorFlashDiskIoReadDisk (
- IN EFI_DISK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 Offset,
- IN UINTN BufferSize,
- OUT VOID *Buffer
- );
-
-//
-// DiskIO Protocol function EFI_DISK_IO_PROTOCOL.WriteDisk
-//
-EFI_STATUS
-EFIAPI
-NorFlashDiskIoWriteDisk (
- IN EFI_DISK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 Offset,
- IN UINTN BufferSize,
- IN VOID *Buffer
- );
-
-//
-// NorFlashFvbDxe.c
-//
-
-EFI_STATUS
-EFIAPI
-FvbGetAttributes (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- OUT EFI_FVB_ATTRIBUTES_2 *Attributes
- );
-
-EFI_STATUS
-EFIAPI
-FvbSetAttributes (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes
- );
-
-EFI_STATUS
-EFIAPI
-FvbGetPhysicalAddress (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- OUT EFI_PHYSICAL_ADDRESS *Address
- );
-
-EFI_STATUS
-EFIAPI
-FvbGetBlockSize (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- IN EFI_LBA Lba,
- OUT UINTN *BlockSize,
- OUT UINTN *NumberOfBlocks
- );
-
-EFI_STATUS
-EFIAPI
-FvbRead (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- IN EFI_LBA Lba,
- IN UINTN Offset,
- IN OUT UINTN *NumBytes,
- IN OUT UINT8 *Buffer
- );
-
-EFI_STATUS
-EFIAPI
-FvbWrite (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- IN EFI_LBA Lba,
- IN UINTN Offset,
- IN OUT UINTN *NumBytes,
- IN UINT8 *Buffer
- );
-
-EFI_STATUS
-EFIAPI
-FvbEraseBlocks (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- ...
- );
-
-EFI_STATUS
-ValidateFvHeader (
- IN NOR_FLASH_INSTANCE *Instance
- );
-
-EFI_STATUS
-InitializeFvAndVariableStoreHeaders (
- IN NOR_FLASH_INSTANCE *Instance
- );
-
-VOID
-EFIAPI
-FvbVirtualNotifyEvent (
- IN EFI_EVENT Event,
- IN VOID *Context
- );
-
-//
-// NorFlashDxe.c
-//
-
-EFI_STATUS
-NorFlashWriteFullBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINT32 *DataBuffer,
- IN UINT32 BlockSizeInWords
- );
-
-EFI_STATUS
-NorFlashUnlockAndEraseSingleBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN BlockAddress
- );
-
-EFI_STATUS
-NorFlashCreateInstance (
- IN UINTN NorFlashDeviceBase,
- IN UINTN NorFlashRegionBase,
- IN UINTN NorFlashSize,
- IN UINT32 Index,
- IN UINT32 BlockSize,
- IN BOOLEAN SupportFvb,
- OUT NOR_FLASH_INSTANCE **NorFlashInstance
- );
-
-EFI_STATUS
-EFIAPI
-NorFlashFvbInitialize (
- IN NOR_FLASH_INSTANCE *Instance
- );
-
-//
-// NorFlash.c
-//
-EFI_STATUS
-NorFlashWriteSingleBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINTN Offset,
- IN OUT UINTN *NumBytes,
- IN UINT8 *Buffer
- );
-
-EFI_STATUS
-NorFlashWriteBlocks (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINTN BufferSizeInBytes,
- IN VOID *Buffer
- );
-
-EFI_STATUS
-NorFlashReadBlocks (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINTN BufferSizeInBytes,
- OUT VOID *Buffer
- );
-
-EFI_STATUS
-NorFlashRead (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINTN Offset,
- IN UINTN BufferSizeInBytes,
- OUT VOID *Buffer
- );
-
-EFI_STATUS
-NorFlashWrite (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINTN Offset,
- IN OUT UINTN *NumBytes,
- IN UINT8 *Buffer
- );
-
-EFI_STATUS
-NorFlashReset (
- IN NOR_FLASH_INSTANCE *Instance
- );
-
-EFI_STATUS
-NorFlashEraseSingleBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN BlockAddress
- );
-
-EFI_STATUS
-NorFlashUnlockSingleBlockIfNecessary (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN BlockAddress
- );
-
-EFI_STATUS
-NorFlashWriteSingleWord (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN WordAddress,
- IN UINT32 WriteData
- );
-
-VOID
-EFIAPI
-NorFlashVirtualNotifyEvent (
- IN EFI_EVENT Event,
- IN VOID *Context
- );
-
-#endif /* __NOR_FLASH_H__ */
diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c
deleted file mode 100644
index 9d4732c690..0000000000
--- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/** @file NorFlashBlockIoDxe.c
-
- Copyright (c) 2011-2013, ARM Ltd. All rights reserved.
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include
-#include
-
-#include "NorFlash.h"
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.Reset
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoReset (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN BOOLEAN ExtendedVerification
- )
-{
- NOR_FLASH_INSTANCE *Instance;
-
- Instance = INSTANCE_FROM_BLKIO_THIS (This);
-
- DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoReset(MediaId=0x%x)\n", This->Media->MediaId));
-
- return NorFlashReset (Instance);
-}
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.ReadBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoReadBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN EFI_LBA Lba,
- IN UINTN BufferSizeInBytes,
- OUT VOID *Buffer
- )
-{
- NOR_FLASH_INSTANCE *Instance;
- EFI_STATUS Status;
- EFI_BLOCK_IO_MEDIA *Media;
-
- if (This == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- Instance = INSTANCE_FROM_BLKIO_THIS (This);
- Media = This->Media;
-
- DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoReadBlocks(MediaId=0x%x, Lba=%ld, BufferSize=0x%x bytes (%d kB), BufferPtr @ 0x%08x)\n", MediaId, Lba, BufferSizeInBytes, BufferSizeInBytes, Buffer));
-
- if (!Media) {
- Status = EFI_INVALID_PARAMETER;
- } else if (!Media->MediaPresent) {
- Status = EFI_NO_MEDIA;
- } else if (Media->MediaId != MediaId) {
- Status = EFI_MEDIA_CHANGED;
- } else if ((Media->IoAlign > 2) && (((UINTN)Buffer & (Media->IoAlign - 1)) != 0)) {
- Status = EFI_INVALID_PARAMETER;
- } else {
- Status = NorFlashReadBlocks (Instance, Lba, BufferSizeInBytes, Buffer);
- }
-
- return Status;
-}
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.WriteBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoWriteBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN EFI_LBA Lba,
- IN UINTN BufferSizeInBytes,
- IN VOID *Buffer
- )
-{
- NOR_FLASH_INSTANCE *Instance;
- EFI_STATUS Status;
-
- Instance = INSTANCE_FROM_BLKIO_THIS (This);
-
- DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoWriteBlocks(MediaId=0x%x, Lba=%ld, BufferSize=0x%x bytes, BufferPtr @ 0x%08x)\n", MediaId, Lba, BufferSizeInBytes, Buffer));
-
- if ( !This->Media->MediaPresent ) {
- Status = EFI_NO_MEDIA;
- } else if ( This->Media->MediaId != MediaId ) {
- Status = EFI_MEDIA_CHANGED;
- } else if ( This->Media->ReadOnly ) {
- Status = EFI_WRITE_PROTECTED;
- } else {
- Status = NorFlashWriteBlocks (Instance, Lba, BufferSizeInBytes, Buffer);
- }
-
- return Status;
-}
-
-//
-// BlockIO Protocol function EFI_BLOCK_IO_PROTOCOL.FlushBlocks
-//
-EFI_STATUS
-EFIAPI
-NorFlashBlockIoFlushBlocks (
- IN EFI_BLOCK_IO_PROTOCOL *This
- )
-{
- // No Flush required for the NOR Flash driver
- // because cache operations are not permitted.
-
- DEBUG ((DEBUG_BLKIO, "NorFlashBlockIoFlushBlocks: Function NOT IMPLEMENTED (not required).\n"));
-
- // Nothing to do so just return without error
- return EFI_SUCCESS;
-}
diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.c b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.c
deleted file mode 100644
index f7b92de21a..0000000000
--- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.c
+++ /dev/null
@@ -1,506 +0,0 @@
-/** @file NorFlashDxe.c
-
- Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-
-#include "NorFlash.h"
-
-STATIC EFI_EVENT mNorFlashVirtualAddrChangeEvent;
-
-//
-// Global variable declarations
-//
-NOR_FLASH_INSTANCE **mNorFlashInstances;
-UINT32 mNorFlashDeviceCount;
-UINTN mFlashNvStorageVariableBase;
-EFI_EVENT mFvbVirtualAddrChangeEvent;
-
-NOR_FLASH_INSTANCE mNorFlashInstanceTemplate = {
- NOR_FLASH_SIGNATURE, // Signature
- NULL, // Handle ... NEED TO BE FILLED
-
- 0, // DeviceBaseAddress ... NEED TO BE FILLED
- 0, // RegionBaseAddress ... NEED TO BE FILLED
- 0, // Size ... NEED TO BE FILLED
- 0, // StartLba
-
- {
- EFI_BLOCK_IO_PROTOCOL_REVISION2, // Revision
- NULL, // Media ... NEED TO BE FILLED
- NorFlashBlockIoReset, // Reset;
- NorFlashBlockIoReadBlocks, // ReadBlocks
- NorFlashBlockIoWriteBlocks, // WriteBlocks
- NorFlashBlockIoFlushBlocks // FlushBlocks
- }, // BlockIoProtocol
-
- {
- 0, // MediaId ... NEED TO BE FILLED
- FALSE, // RemovableMedia
- TRUE, // MediaPresent
- FALSE, // LogicalPartition
- FALSE, // ReadOnly
- FALSE, // WriteCaching;
- 0, // BlockSize ... NEED TO BE FILLED
- 4, // IoAlign
- 0, // LastBlock ... NEED TO BE FILLED
- 0, // LowestAlignedLba
- 1, // LogicalBlocksPerPhysicalBlock
- }, // Media;
-
- {
- EFI_DISK_IO_PROTOCOL_REVISION, // Revision
- NorFlashDiskIoReadDisk, // ReadDisk
- NorFlashDiskIoWriteDisk // WriteDisk
- },
-
- {
- FvbGetAttributes, // GetAttributes
- FvbSetAttributes, // SetAttributes
- FvbGetPhysicalAddress, // GetPhysicalAddress
- FvbGetBlockSize, // GetBlockSize
- FvbRead, // Read
- FvbWrite, // Write
- FvbEraseBlocks, // EraseBlocks
- NULL, // ParentHandle
- }, // FvbProtoccol;
- NULL, // ShadowBuffer
- {
- {
- {
- HARDWARE_DEVICE_PATH,
- HW_VENDOR_DP,
- {
- (UINT8)(OFFSET_OF (NOR_FLASH_DEVICE_PATH, End)),
- (UINT8)(OFFSET_OF (NOR_FLASH_DEVICE_PATH, End) >> 8)
- }
- },
- { 0x0, 0x0, 0x0, { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }
- }, // GUID ... NEED TO BE FILLED
- },
- 0, // Index
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- { sizeof (EFI_DEVICE_PATH_PROTOCOL), 0 }
- }
- } // DevicePath
-};
-
-EFI_STATUS
-NorFlashCreateInstance (
- IN UINTN NorFlashDeviceBase,
- IN UINTN NorFlashRegionBase,
- IN UINTN NorFlashSize,
- IN UINT32 Index,
- IN UINT32 BlockSize,
- IN BOOLEAN SupportFvb,
- OUT NOR_FLASH_INSTANCE **NorFlashInstance
- )
-{
- EFI_STATUS Status;
- NOR_FLASH_INSTANCE *Instance;
-
- ASSERT (NorFlashInstance != NULL);
-
- Instance = AllocateRuntimeCopyPool (sizeof (NOR_FLASH_INSTANCE), &mNorFlashInstanceTemplate);
- if (Instance == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- Instance->DeviceBaseAddress = NorFlashDeviceBase;
- Instance->RegionBaseAddress = NorFlashRegionBase;
- Instance->Size = NorFlashSize;
-
- Instance->BlockIoProtocol.Media = &Instance->Media;
- Instance->Media.MediaId = Index;
- Instance->Media.BlockSize = BlockSize;
- Instance->Media.LastBlock = (NorFlashSize / BlockSize)-1;
-
- CopyGuid (&Instance->DevicePath.Vendor.Guid, &gEfiCallerIdGuid);
- Instance->DevicePath.Index = (UINT8)Index;
-
- Instance->ShadowBuffer = AllocateRuntimePool (BlockSize);
- if (Instance->ShadowBuffer == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- if (SupportFvb) {
- NorFlashFvbInitialize (Instance);
-
- Status = gBS->InstallMultipleProtocolInterfaces (
- &Instance->Handle,
- &gEfiDevicePathProtocolGuid,
- &Instance->DevicePath,
- &gEfiBlockIoProtocolGuid,
- &Instance->BlockIoProtocol,
- &gEfiFirmwareVolumeBlockProtocolGuid,
- &Instance->FvbProtocol,
- NULL
- );
- if (EFI_ERROR (Status)) {
- FreePool (Instance);
- return Status;
- }
- } else {
- Status = gBS->InstallMultipleProtocolInterfaces (
- &Instance->Handle,
- &gEfiDevicePathProtocolGuid,
- &Instance->DevicePath,
- &gEfiBlockIoProtocolGuid,
- &Instance->BlockIoProtocol,
- &gEfiDiskIoProtocolGuid,
- &Instance->DiskIoProtocol,
- NULL
- );
- if (EFI_ERROR (Status)) {
- FreePool (Instance);
- return Status;
- }
- }
-
- *NorFlashInstance = Instance;
- return Status;
-}
-
-/**
- * This function unlock and erase an entire NOR Flash block.
- **/
-EFI_STATUS
-NorFlashUnlockAndEraseSingleBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN BlockAddress
- )
-{
- EFI_STATUS Status;
- UINTN Index;
- EFI_TPL OriginalTPL;
-
- if (!EfiAtRuntime ()) {
- // Raise TPL to TPL_HIGH to stop anyone from interrupting us.
- OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL);
- } else {
- // This initialization is only to prevent the compiler to complain about the
- // use of uninitialized variables
- OriginalTPL = TPL_HIGH_LEVEL;
- }
-
- Index = 0;
- // The block erase might fail a first time (SW bug ?). Retry it ...
- do {
- // Unlock the block if we have to
- Status = NorFlashUnlockSingleBlockIfNecessary (Instance, BlockAddress);
- if (EFI_ERROR (Status)) {
- break;
- }
-
- Status = NorFlashEraseSingleBlock (Instance, BlockAddress);
- Index++;
- } while ((Index < NOR_FLASH_ERASE_RETRY) && (Status == EFI_WRITE_PROTECTED));
-
- if (Index == NOR_FLASH_ERASE_RETRY) {
- DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: Block Locked Error (try to erase %d times)\n", BlockAddress, Index));
- }
-
- if (!EfiAtRuntime ()) {
- // Interruptions can resume.
- gBS->RestoreTPL (OriginalTPL);
- }
-
- return Status;
-}
-
-EFI_STATUS
-NorFlashWriteFullBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINT32 *DataBuffer,
- IN UINT32 BlockSizeInWords
- )
-{
- EFI_STATUS Status;
- UINTN WordAddress;
- UINT32 WordIndex;
- UINTN BufferIndex;
- UINTN BlockAddress;
- UINTN BuffersInBlock;
- UINTN RemainingWords;
- EFI_TPL OriginalTPL;
- UINTN Cnt;
-
- Status = EFI_SUCCESS;
-
- // Get the physical address of the block
- BlockAddress = GET_NOR_BLOCK_ADDRESS (Instance->RegionBaseAddress, Lba, BlockSizeInWords * 4);
-
- // Start writing from the first address at the start of the block
- WordAddress = BlockAddress;
-
- if (!EfiAtRuntime ()) {
- // Raise TPL to TPL_HIGH to stop anyone from interrupting us.
- OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL);
- } else {
- // This initialization is only to prevent the compiler to complain about the
- // use of uninitialized variables
- OriginalTPL = TPL_HIGH_LEVEL;
- }
-
- Status = NorFlashUnlockAndEraseSingleBlock (Instance, BlockAddress);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "WriteSingleBlock: ERROR - Failed to Unlock and Erase the single block at 0x%X\n", BlockAddress));
- goto EXIT;
- }
-
- // To speed up the programming operation, NOR Flash is programmed using the Buffered Programming method.
-
- // Check that the address starts at a 32-word boundary, i.e. last 7 bits must be zero
- if ((WordAddress & BOUNDARY_OF_32_WORDS) == 0x00) {
- // First, break the entire block into buffer-sized chunks.
- BuffersInBlock = (UINTN)(BlockSizeInWords * 4) / P30_MAX_BUFFER_SIZE_IN_BYTES;
-
- // Then feed each buffer chunk to the NOR Flash
- // If a buffer does not contain any data, don't write it.
- for (BufferIndex = 0;
- BufferIndex < BuffersInBlock;
- BufferIndex++, WordAddress += P30_MAX_BUFFER_SIZE_IN_BYTES, DataBuffer += P30_MAX_BUFFER_SIZE_IN_WORDS
- )
- {
- // Check the buffer to see if it contains any data (not set all 1s).
- for (Cnt = 0; Cnt < P30_MAX_BUFFER_SIZE_IN_WORDS; Cnt++) {
- if (~DataBuffer[Cnt] != 0 ) {
- // Some data found, write the buffer.
- Status = NorFlashWriteBuffer (
- Instance,
- WordAddress,
- P30_MAX_BUFFER_SIZE_IN_BYTES,
- DataBuffer
- );
- if (EFI_ERROR (Status)) {
- goto EXIT;
- }
-
- break;
- }
- }
- }
-
- // Finally, finish off any remaining words that are less than the maximum size of the buffer
- RemainingWords = BlockSizeInWords % P30_MAX_BUFFER_SIZE_IN_WORDS;
-
- if (RemainingWords != 0) {
- Status = NorFlashWriteBuffer (Instance, WordAddress, (RemainingWords * 4), DataBuffer);
- if (EFI_ERROR (Status)) {
- goto EXIT;
- }
- }
- } else {
- // For now, use the single word programming algorithm
- // It is unlikely that the NOR Flash will exist in an address which falls within a 32 word boundary range,
- // i.e. which ends in the range 0x......01 - 0x......7F.
- for (WordIndex = 0; WordIndex < BlockSizeInWords; WordIndex++, DataBuffer++, WordAddress = WordAddress + 4) {
- Status = NorFlashWriteSingleWord (Instance, WordAddress, *DataBuffer);
- if (EFI_ERROR (Status)) {
- goto EXIT;
- }
- }
- }
-
-EXIT:
- if (!EfiAtRuntime ()) {
- // Interruptions can resume.
- gBS->RestoreTPL (OriginalTPL);
- }
-
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "NOR FLASH Programming [WriteSingleBlock] failed at address 0x%08x. Exit Status = \"%r\".\n", WordAddress, Status));
- }
-
- return Status;
-}
-
-EFI_STATUS
-EFIAPI
-NorFlashInitialise (
- IN EFI_HANDLE ImageHandle,
- IN EFI_SYSTEM_TABLE *SystemTable
- )
-{
- EFI_STATUS Status;
- UINT32 Index;
- NOR_FLASH_DESCRIPTION *NorFlashDevices;
- BOOLEAN ContainVariableStorage;
-
- Status = NorFlashPlatformInitialization ();
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to initialize Nor Flash devices\n"));
- return Status;
- }
-
- Status = NorFlashPlatformGetDevices (&NorFlashDevices, &mNorFlashDeviceCount);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to get Nor Flash devices\n"));
- return Status;
- }
-
- mNorFlashInstances = AllocateRuntimePool (sizeof (NOR_FLASH_INSTANCE *) * mNorFlashDeviceCount);
-
- for (Index = 0; Index < mNorFlashDeviceCount; Index++) {
- // Check if this NOR Flash device contain the variable storage region
-
- if (PcdGet64 (PcdFlashNvStorageVariableBase64) != 0) {
- ContainVariableStorage =
- (NorFlashDevices[Index].RegionBaseAddress <= PcdGet64 (PcdFlashNvStorageVariableBase64)) &&
- (PcdGet64 (PcdFlashNvStorageVariableBase64) + PcdGet32 (PcdFlashNvStorageVariableSize) <=
- NorFlashDevices[Index].RegionBaseAddress + NorFlashDevices[Index].Size);
- } else {
- ContainVariableStorage =
- (NorFlashDevices[Index].RegionBaseAddress <= PcdGet32 (PcdFlashNvStorageVariableBase)) &&
- (PcdGet32 (PcdFlashNvStorageVariableBase) + PcdGet32 (PcdFlashNvStorageVariableSize) <=
- NorFlashDevices[Index].RegionBaseAddress + NorFlashDevices[Index].Size);
- }
-
- Status = NorFlashCreateInstance (
- NorFlashDevices[Index].DeviceBaseAddress,
- NorFlashDevices[Index].RegionBaseAddress,
- NorFlashDevices[Index].Size,
- Index,
- NorFlashDevices[Index].BlockSize,
- ContainVariableStorage,
- &mNorFlashInstances[Index]
- );
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to create instance for NorFlash[%d]\n", Index));
- }
- }
-
- //
- // Register for the virtual address change event
- //
- Status = gBS->CreateEventEx (
- EVT_NOTIFY_SIGNAL,
- TPL_NOTIFY,
- NorFlashVirtualNotifyEvent,
- NULL,
- &gEfiEventVirtualAddressChangeGuid,
- &mNorFlashVirtualAddrChangeEvent
- );
- ASSERT_EFI_ERROR (Status);
-
- return Status;
-}
-
-EFI_STATUS
-EFIAPI
-NorFlashFvbInitialize (
- IN NOR_FLASH_INSTANCE *Instance
- )
-{
- EFI_STATUS Status;
- UINT32 FvbNumLba;
- EFI_BOOT_MODE BootMode;
- UINTN RuntimeMmioRegionSize;
-
- DEBUG ((DEBUG_BLKIO, "NorFlashFvbInitialize\n"));
- ASSERT ((Instance != NULL));
-
- //
- // Declare the Non-Volatile storage as EFI_MEMORY_RUNTIME
- //
-
- // Note: all the NOR Flash region needs to be reserved into the UEFI Runtime memory;
- // even if we only use the small block region at the top of the NOR Flash.
- // The reason is when the NOR Flash memory is set into program mode, the command
- // is written as the base of the flash region (ie: Instance->DeviceBaseAddress)
- RuntimeMmioRegionSize = (Instance->RegionBaseAddress - Instance->DeviceBaseAddress) + Instance->Size;
-
- Status = gDS->AddMemorySpace (
- EfiGcdMemoryTypeMemoryMappedIo,
- Instance->DeviceBaseAddress,
- RuntimeMmioRegionSize,
- EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
- );
- ASSERT_EFI_ERROR (Status);
-
- Status = gDS->SetMemorySpaceAttributes (
- Instance->DeviceBaseAddress,
- RuntimeMmioRegionSize,
- EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
- );
- ASSERT_EFI_ERROR (Status);
-
- mFlashNvStorageVariableBase = (PcdGet64 (PcdFlashNvStorageVariableBase64) != 0) ?
- PcdGet64 (PcdFlashNvStorageVariableBase64) : PcdGet32 (PcdFlashNvStorageVariableBase);
-
- // Set the index of the first LBA for the FVB
- Instance->StartLba = (mFlashNvStorageVariableBase - Instance->RegionBaseAddress) / Instance->Media.BlockSize;
-
- BootMode = GetBootModeHob ();
- if (BootMode == BOOT_WITH_DEFAULT_SETTINGS) {
- Status = EFI_INVALID_PARAMETER;
- } else {
- // Determine if there is a valid header at the beginning of the NorFlash
- Status = ValidateFvHeader (Instance);
- }
-
- // Install the Default FVB header if required
- if (EFI_ERROR (Status)) {
- // There is no valid header, so time to install one.
- DEBUG ((DEBUG_INFO, "%a: The FVB Header is not valid.\n", __FUNCTION__));
- DEBUG ((
- DEBUG_INFO,
- "%a: Installing a correct one for this volume.\n",
- __FUNCTION__
- ));
-
- // Erase all the NorFlash that is reserved for variable storage
- FvbNumLba = (PcdGet32 (PcdFlashNvStorageVariableSize) + PcdGet32 (PcdFlashNvStorageFtwWorkingSize) + PcdGet32 (PcdFlashNvStorageFtwSpareSize)) / Instance->Media.BlockSize;
-
- Status = FvbEraseBlocks (&Instance->FvbProtocol, (EFI_LBA)0, FvbNumLba, EFI_LBA_LIST_TERMINATOR);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- // Install all appropriate headers
- Status = InitializeFvAndVariableStoreHeaders (Instance);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- }
-
- //
- // The driver implementing the variable read service can now be dispatched;
- // the varstore headers are in place.
- //
- Status = gBS->InstallProtocolInterface (
- &gImageHandle,
- &gEdkiiNvVarStoreFormattedGuid,
- EFI_NATIVE_INTERFACE,
- NULL
- );
- ASSERT_EFI_ERROR (Status);
-
- //
- // Register for the virtual address change event
- //
- Status = gBS->CreateEventEx (
- EVT_NOTIFY_SIGNAL,
- TPL_NOTIFY,
- FvbVirtualNotifyEvent,
- NULL,
- &gEfiEventVirtualAddressChangeGuid,
- &mFvbVirtualAddrChangeEvent
- );
- ASSERT_EFI_ERROR (Status);
-
- return Status;
-}
diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
deleted file mode 100644
index f8d4c27031..0000000000
--- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
+++ /dev/null
@@ -1,71 +0,0 @@
-#/** @file
-#
-# Component description file for NorFlashDxe module
-#
-# Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.
-#
-# SPDX-License-Identifier: BSD-2-Clause-Patent
-#
-#**/
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = ArmVeNorFlashDxe
- FILE_GUID = 93E34C7E-B50E-11DF-9223-2443DFD72085
- MODULE_TYPE = DXE_RUNTIME_DRIVER
- VERSION_STRING = 1.0
- ENTRY_POINT = NorFlashInitialise
-
-[Sources.common]
- NorFlash.c
- NorFlash.h
- NorFlashDxe.c
- NorFlashFvb.c
- NorFlashBlockIoDxe.c
-
-[Packages]
- MdePkg/MdePkg.dec
- MdeModulePkg/MdeModulePkg.dec
- ArmPlatformPkg/ArmPlatformPkg.dec
- EmbeddedPkg/EmbeddedPkg.dec
-
-[LibraryClasses]
- IoLib
- BaseLib
- DebugLib
- HobLib
- NorFlashPlatformLib
- UefiLib
- UefiDriverEntryPoint
- UefiBootServicesTableLib
- UefiRuntimeLib
- DxeServicesTableLib
-
-[Guids]
- gEfiSystemNvDataFvGuid
- gEfiVariableGuid
- gEfiAuthenticatedVariableGuid
- gEfiEventVirtualAddressChangeGuid
- gEdkiiNvVarStoreFormattedGuid ## PRODUCES ## PROTOCOL
-
-[Protocols]
- gEfiBlockIoProtocolGuid
- gEfiDevicePathProtocolGuid
- gEfiFirmwareVolumeBlockProtocolGuid
- gEfiDiskIoProtocolGuid
-
-[Pcd.common]
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
-
- gArmPlatformTokenSpaceGuid.PcdNorFlashCheckBlockLocked
-
-[Depex]
- gEfiCpuArchProtocolGuid
diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvb.c b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvb.c
deleted file mode 100644
index 0767581308..0000000000
--- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvb.c
+++ /dev/null
@@ -1,777 +0,0 @@
-/*++ @file NorFlashFvbDxe.c
-
- Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
- --*/
-
-#include
-
-#include
-#include
-#include
-#include
-#include
-
-#include
-#include
-#include
-
-#include "NorFlash.h"
-
-extern UINTN mFlashNvStorageVariableBase;
-///
-/// The Firmware Volume Block Protocol is the low-level interface
-/// to a firmware volume. File-level access to a firmware volume
-/// should not be done using the Firmware Volume Block Protocol.
-/// Normal access to a firmware volume must use the Firmware
-/// Volume Protocol. Typically, only the file system driver that
-/// produces the Firmware Volume Protocol will bind to the
-/// Firmware Volume Block Protocol.
-///
-
-/**
- Initialises the FV Header and Variable Store Header
- to support variable operations.
-
- @param[in] Ptr - Location to initialise the headers
-
-**/
-EFI_STATUS
-InitializeFvAndVariableStoreHeaders (
- IN NOR_FLASH_INSTANCE *Instance
- )
-{
- EFI_STATUS Status;
- VOID *Headers;
- UINTN HeadersLength;
- EFI_FIRMWARE_VOLUME_HEADER *FirmwareVolumeHeader;
- VARIABLE_STORE_HEADER *VariableStoreHeader;
- UINT32 NvStorageFtwSpareSize;
- UINT32 NvStorageFtwWorkingSize;
- UINT32 NvStorageVariableSize;
- UINT64 NvStorageFtwSpareBase;
- UINT64 NvStorageFtwWorkingBase;
- UINT64 NvStorageVariableBase;
-
- HeadersLength = sizeof (EFI_FIRMWARE_VOLUME_HEADER) + sizeof (EFI_FV_BLOCK_MAP_ENTRY) + sizeof (VARIABLE_STORE_HEADER);
- Headers = AllocateZeroPool (HeadersLength);
-
- NvStorageFtwWorkingSize = PcdGet32 (PcdFlashNvStorageFtwWorkingSize);
- NvStorageFtwSpareSize = PcdGet32 (PcdFlashNvStorageFtwSpareSize);
- NvStorageVariableSize = PcdGet32 (PcdFlashNvStorageVariableSize);
-
- NvStorageFtwSpareBase = (PcdGet64 (PcdFlashNvStorageFtwSpareBase64) != 0) ?
- PcdGet64 (PcdFlashNvStorageFtwSpareBase64) : PcdGet32 (PcdFlashNvStorageFtwSpareBase);
- NvStorageFtwWorkingBase = (PcdGet64 (PcdFlashNvStorageFtwWorkingBase64) != 0) ?
- PcdGet64 (PcdFlashNvStorageFtwWorkingBase64) : PcdGet32 (PcdFlashNvStorageFtwWorkingBase);
- NvStorageVariableBase = (PcdGet64 (PcdFlashNvStorageVariableBase64) != 0) ?
- PcdGet64 (PcdFlashNvStorageVariableBase64) : PcdGet32 (PcdFlashNvStorageVariableBase);
-
- // FirmwareVolumeHeader->FvLength is declared to have the Variable area AND the FTW working area AND the FTW Spare contiguous.
- if ((NvStorageVariableBase + NvStorageVariableSize) != NvStorageFtwWorkingBase) {
- DEBUG ((
- DEBUG_ERROR,
- "%a: NvStorageFtwWorkingBase is not contiguous with NvStorageVariableBase region\n",
- __FUNCTION__
- ));
- return EFI_INVALID_PARAMETER;
- }
-
- if ((NvStorageFtwWorkingBase + NvStorageFtwWorkingSize) != NvStorageFtwSpareBase) {
- DEBUG ((
- DEBUG_ERROR,
- "%a: NvStorageFtwSpareBase is not contiguous with NvStorageFtwWorkingBase region\n",
- __FUNCTION__
- ));
- return EFI_INVALID_PARAMETER;
- }
-
- // Check if the size of the area is at least one block size
- if ((NvStorageVariableSize <= 0) || (NvStorageVariableSize / Instance->Media.BlockSize <= 0)) {
- DEBUG ((
- DEBUG_ERROR,
- "%a: NvStorageVariableSize is 0x%x, should be atleast one block size\n",
- __FUNCTION__,
- NvStorageVariableSize
- ));
- return EFI_INVALID_PARAMETER;
- }
-
- if ((NvStorageFtwWorkingSize <= 0) || (NvStorageFtwWorkingSize / Instance->Media.BlockSize <= 0)) {
- DEBUG ((
- DEBUG_ERROR,
- "%a: NvStorageFtwWorkingSize is 0x%x, should be atleast one block size\n",
- __FUNCTION__,
- NvStorageFtwWorkingSize
- ));
- return EFI_INVALID_PARAMETER;
- }
-
- if ((NvStorageFtwSpareSize <= 0) || (NvStorageFtwSpareSize / Instance->Media.BlockSize <= 0)) {
- DEBUG ((
- DEBUG_ERROR,
- "%a: NvStorageFtwSpareSize is 0x%x, should be atleast one block size\n",
- __FUNCTION__,
- NvStorageFtwSpareSize
- ));
- return EFI_INVALID_PARAMETER;
- }
-
- // Ensure the Variable area Base Addresses are aligned on a block size boundaries
- if ((NvStorageVariableBase % Instance->Media.BlockSize != 0) ||
- (NvStorageFtwWorkingBase % Instance->Media.BlockSize != 0) ||
- (NvStorageFtwSpareBase % Instance->Media.BlockSize != 0))
- {
- DEBUG ((DEBUG_ERROR, "%a: NvStorage Base addresses must be aligned to block size boundaries", __FUNCTION__));
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // EFI_FIRMWARE_VOLUME_HEADER
- //
- FirmwareVolumeHeader = (EFI_FIRMWARE_VOLUME_HEADER *)Headers;
- CopyGuid (&FirmwareVolumeHeader->FileSystemGuid, &gEfiSystemNvDataFvGuid);
- FirmwareVolumeHeader->FvLength =
- PcdGet32 (PcdFlashNvStorageVariableSize) +
- PcdGet32 (PcdFlashNvStorageFtwWorkingSize) +
- PcdGet32 (PcdFlashNvStorageFtwSpareSize);
- FirmwareVolumeHeader->Signature = EFI_FVH_SIGNATURE;
- FirmwareVolumeHeader->Attributes = (EFI_FVB_ATTRIBUTES_2)(
- EFI_FVB2_READ_ENABLED_CAP | // Reads may be enabled
- EFI_FVB2_READ_STATUS | // Reads are currently enabled
- EFI_FVB2_STICKY_WRITE | // A block erase is required to flip bits into EFI_FVB2_ERASE_POLARITY
- EFI_FVB2_MEMORY_MAPPED | // It is memory mapped
- EFI_FVB2_ERASE_POLARITY | // After erasure all bits take this value (i.e. '1')
- EFI_FVB2_WRITE_STATUS | // Writes are currently enabled
- EFI_FVB2_WRITE_ENABLED_CAP // Writes may be enabled
- );
- FirmwareVolumeHeader->HeaderLength = sizeof (EFI_FIRMWARE_VOLUME_HEADER) + sizeof (EFI_FV_BLOCK_MAP_ENTRY);
- FirmwareVolumeHeader->Revision = EFI_FVH_REVISION;
- FirmwareVolumeHeader->BlockMap[0].NumBlocks = Instance->Media.LastBlock + 1;
- FirmwareVolumeHeader->BlockMap[0].Length = Instance->Media.BlockSize;
- FirmwareVolumeHeader->BlockMap[1].NumBlocks = 0;
- FirmwareVolumeHeader->BlockMap[1].Length = 0;
- FirmwareVolumeHeader->Checksum = CalculateCheckSum16 ((UINT16 *)FirmwareVolumeHeader, FirmwareVolumeHeader->HeaderLength);
-
- //
- // VARIABLE_STORE_HEADER
- //
- VariableStoreHeader = (VARIABLE_STORE_HEADER *)((UINTN)Headers + FirmwareVolumeHeader->HeaderLength);
- CopyGuid (&VariableStoreHeader->Signature, &gEfiAuthenticatedVariableGuid);
- VariableStoreHeader->Size = PcdGet32 (PcdFlashNvStorageVariableSize) - FirmwareVolumeHeader->HeaderLength;
- VariableStoreHeader->Format = VARIABLE_STORE_FORMATTED;
- VariableStoreHeader->State = VARIABLE_STORE_HEALTHY;
-
- // Install the combined super-header in the NorFlash
- Status = FvbWrite (&Instance->FvbProtocol, 0, 0, &HeadersLength, Headers);
-
- FreePool (Headers);
- return Status;
-}
-
-/**
- Check the integrity of firmware volume header.
-
- @param[in] FwVolHeader - A pointer to a firmware volume header
-
- @retval EFI_SUCCESS - The firmware volume is consistent
- @retval EFI_NOT_FOUND - The firmware volume has been corrupted.
-
-**/
-EFI_STATUS
-ValidateFvHeader (
- IN NOR_FLASH_INSTANCE *Instance
- )
-{
- UINT16 Checksum;
- EFI_FIRMWARE_VOLUME_HEADER *FwVolHeader;
- VARIABLE_STORE_HEADER *VariableStoreHeader;
- UINTN VariableStoreLength;
- UINTN FvLength;
-
- FwVolHeader = (EFI_FIRMWARE_VOLUME_HEADER *)Instance->RegionBaseAddress;
-
- FvLength = PcdGet32 (PcdFlashNvStorageVariableSize) + PcdGet32 (PcdFlashNvStorageFtwWorkingSize) +
- PcdGet32 (PcdFlashNvStorageFtwSpareSize);
-
- //
- // Verify the header revision, header signature, length
- // Length of FvBlock cannot be 2**64-1
- // HeaderLength cannot be an odd number
- //
- if ( (FwVolHeader->Revision != EFI_FVH_REVISION)
- || (FwVolHeader->Signature != EFI_FVH_SIGNATURE)
- || (FwVolHeader->FvLength != FvLength)
- )
- {
- DEBUG ((
- DEBUG_INFO,
- "%a: No Firmware Volume header present\n",
- __FUNCTION__
- ));
- return EFI_NOT_FOUND;
- }
-
- // Check the Firmware Volume Guid
- if ( CompareGuid (&FwVolHeader->FileSystemGuid, &gEfiSystemNvDataFvGuid) == FALSE ) {
- DEBUG ((
- DEBUG_INFO,
- "%a: Firmware Volume Guid non-compatible\n",
- __FUNCTION__
- ));
- return EFI_NOT_FOUND;
- }
-
- // Verify the header checksum
- Checksum = CalculateSum16 ((UINT16 *)FwVolHeader, FwVolHeader->HeaderLength);
- if (Checksum != 0) {
- DEBUG ((
- DEBUG_INFO,
- "%a: FV checksum is invalid (Checksum:0x%X)\n",
- __FUNCTION__,
- Checksum
- ));
- return EFI_NOT_FOUND;
- }
-
- VariableStoreHeader = (VARIABLE_STORE_HEADER *)((UINTN)FwVolHeader + FwVolHeader->HeaderLength);
-
- // Check the Variable Store Guid
- if (!CompareGuid (&VariableStoreHeader->Signature, &gEfiVariableGuid) &&
- !CompareGuid (&VariableStoreHeader->Signature, &gEfiAuthenticatedVariableGuid))
- {
- DEBUG ((
- DEBUG_INFO,
- "%a: Variable Store Guid non-compatible\n",
- __FUNCTION__
- ));
- return EFI_NOT_FOUND;
- }
-
- VariableStoreLength = PcdGet32 (PcdFlashNvStorageVariableSize) - FwVolHeader->HeaderLength;
- if (VariableStoreHeader->Size != VariableStoreLength) {
- DEBUG ((
- DEBUG_INFO,
- "%a: Variable Store Length does not match\n",
- __FUNCTION__
- ));
- return EFI_NOT_FOUND;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- The GetAttributes() function retrieves the attributes and
- current settings of the block.
-
- @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
-
- @param Attributes Pointer to EFI_FVB_ATTRIBUTES_2 in which the attributes and
- current settings are returned.
- Type EFI_FVB_ATTRIBUTES_2 is defined in EFI_FIRMWARE_VOLUME_HEADER.
-
- @retval EFI_SUCCESS The firmware volume attributes were returned.
-
- **/
-EFI_STATUS
-EFIAPI
-FvbGetAttributes (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- OUT EFI_FVB_ATTRIBUTES_2 *Attributes
- )
-{
- EFI_FVB_ATTRIBUTES_2 FlashFvbAttributes;
- NOR_FLASH_INSTANCE *Instance;
-
- Instance = INSTANCE_FROM_FVB_THIS (This);
-
- FlashFvbAttributes = (EFI_FVB_ATTRIBUTES_2)(
-
- EFI_FVB2_READ_ENABLED_CAP | // Reads may be enabled
- EFI_FVB2_READ_STATUS | // Reads are currently enabled
- EFI_FVB2_STICKY_WRITE | // A block erase is required to flip bits into EFI_FVB2_ERASE_POLARITY
- EFI_FVB2_MEMORY_MAPPED | // It is memory mapped
- EFI_FVB2_ERASE_POLARITY // After erasure all bits take this value (i.e. '1')
-
- );
-
- // Check if it is write protected
- if (Instance->Media.ReadOnly != TRUE) {
- FlashFvbAttributes = FlashFvbAttributes |
- EFI_FVB2_WRITE_STATUS | // Writes are currently enabled
- EFI_FVB2_WRITE_ENABLED_CAP; // Writes may be enabled
- }
-
- *Attributes = FlashFvbAttributes;
-
- DEBUG ((DEBUG_BLKIO, "FvbGetAttributes(0x%X)\n", *Attributes));
-
- return EFI_SUCCESS;
-}
-
-/**
- The SetAttributes() function sets configurable firmware volume attributes
- and returns the new settings of the firmware volume.
-
-
- @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
-
- @param Attributes On input, Attributes is a pointer to EFI_FVB_ATTRIBUTES_2
- that contains the desired firmware volume settings.
- On successful return, it contains the new settings of
- the firmware volume.
- Type EFI_FVB_ATTRIBUTES_2 is defined in EFI_FIRMWARE_VOLUME_HEADER.
-
- @retval EFI_SUCCESS The firmware volume attributes were returned.
-
- @retval EFI_INVALID_PARAMETER The attributes requested are in conflict with the capabilities
- as declared in the firmware volume header.
-
- **/
-EFI_STATUS
-EFIAPI
-FvbSetAttributes (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes
- )
-{
- DEBUG ((DEBUG_BLKIO, "FvbSetAttributes(0x%X) is not supported\n", *Attributes));
- return EFI_UNSUPPORTED;
-}
-
-/**
- The GetPhysicalAddress() function retrieves the base address of
- a memory-mapped firmware volume. This function should be called
- only for memory-mapped firmware volumes.
-
- @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
-
- @param Address Pointer to a caller-allocated
- EFI_PHYSICAL_ADDRESS that, on successful
- return from GetPhysicalAddress(), contains the
- base address of the firmware volume.
-
- @retval EFI_SUCCESS The firmware volume base address was returned.
-
- @retval EFI_NOT_SUPPORTED The firmware volume is not memory mapped.
-
- **/
-EFI_STATUS
-EFIAPI
-FvbGetPhysicalAddress (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- OUT EFI_PHYSICAL_ADDRESS *Address
- )
-{
- NOR_FLASH_INSTANCE *Instance;
-
- Instance = INSTANCE_FROM_FVB_THIS (This);
-
- DEBUG ((DEBUG_BLKIO, "FvbGetPhysicalAddress(BaseAddress=0x%08x)\n", Instance->RegionBaseAddress));
-
- ASSERT (Address != NULL);
-
- *Address = mFlashNvStorageVariableBase;
- return EFI_SUCCESS;
-}
-
-/**
- The GetBlockSize() function retrieves the size of the requested
- block. It also returns the number of additional blocks with
- the identical size. The GetBlockSize() function is used to
- retrieve the block map (see EFI_FIRMWARE_VOLUME_HEADER).
-
-
- @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
-
- @param Lba Indicates the block for which to return the size.
-
- @param BlockSize Pointer to a caller-allocated UINTN in which
- the size of the block is returned.
-
- @param NumberOfBlocks Pointer to a caller-allocated UINTN in
- which the number of consecutive blocks,
- starting with Lba, is returned. All
- blocks in this range have a size of
- BlockSize.
-
-
- @retval EFI_SUCCESS The firmware volume base address was returned.
-
- @retval EFI_INVALID_PARAMETER The requested LBA is out of range.
-
- **/
-EFI_STATUS
-EFIAPI
-FvbGetBlockSize (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- IN EFI_LBA Lba,
- OUT UINTN *BlockSize,
- OUT UINTN *NumberOfBlocks
- )
-{
- EFI_STATUS Status;
- NOR_FLASH_INSTANCE *Instance;
-
- Instance = INSTANCE_FROM_FVB_THIS (This);
-
- DEBUG ((DEBUG_BLKIO, "FvbGetBlockSize(Lba=%ld, BlockSize=0x%x, LastBlock=%ld)\n", Lba, Instance->Media.BlockSize, Instance->Media.LastBlock));
-
- if (Lba > Instance->Media.LastBlock) {
- DEBUG ((DEBUG_ERROR, "FvbGetBlockSize: ERROR - Parameter LBA %ld is beyond the last Lba (%ld).\n", Lba, Instance->Media.LastBlock));
- Status = EFI_INVALID_PARAMETER;
- } else {
- // This is easy because in this platform each NorFlash device has equal sized blocks.
- *BlockSize = (UINTN)Instance->Media.BlockSize;
- *NumberOfBlocks = (UINTN)(Instance->Media.LastBlock - Lba + 1);
-
- DEBUG ((DEBUG_BLKIO, "FvbGetBlockSize: *BlockSize=0x%x, *NumberOfBlocks=0x%x.\n", *BlockSize, *NumberOfBlocks));
-
- Status = EFI_SUCCESS;
- }
-
- return Status;
-}
-
-/**
- Reads the specified number of bytes into a buffer from the specified block.
-
- The Read() function reads the requested number of bytes from the
- requested block and stores them in the provided buffer.
- Implementations should be mindful that the firmware volume
- might be in the ReadDisabled state. If it is in this state,
- the Read() function must return the status code
- EFI_ACCESS_DENIED without modifying the contents of the
- buffer. The Read() function must also prevent spanning block
- boundaries. If a read is requested that would span a block
- boundary, the read must read up to the boundary but not
- beyond. The output parameter NumBytes must be set to correctly
- indicate the number of bytes actually read. The caller must be
- aware that a read may be partially completed.
-
- @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
-
- @param Lba The starting logical block index from which to read.
-
- @param Offset Offset into the block at which to begin reading.
-
- @param NumBytes Pointer to a UINTN.
- At entry, *NumBytes contains the total size of the buffer.
- At exit, *NumBytes contains the total number of bytes read.
-
- @param Buffer Pointer to a caller-allocated buffer that will be used
- to hold the data that is read.
-
- @retval EFI_SUCCESS The firmware volume was read successfully, and contents are
- in Buffer.
-
- @retval EFI_BAD_BUFFER_SIZE Read attempted across an LBA boundary.
- On output, NumBytes contains the total number of bytes
- returned in Buffer.
-
- @retval EFI_ACCESS_DENIED The firmware volume is in the ReadDisabled state.
-
- @retval EFI_DEVICE_ERROR The block device is not functioning correctly and could not be read.
-
- **/
-EFI_STATUS
-EFIAPI
-FvbRead (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- IN EFI_LBA Lba,
- IN UINTN Offset,
- IN OUT UINTN *NumBytes,
- IN OUT UINT8 *Buffer
- )
-{
- EFI_STATUS TempStatus;
- UINTN BlockSize;
- NOR_FLASH_INSTANCE *Instance;
-
- Instance = INSTANCE_FROM_FVB_THIS (This);
-
- DEBUG ((DEBUG_BLKIO, "FvbRead(Parameters: Lba=%ld, Offset=0x%x, *NumBytes=0x%x, Buffer @ 0x%08x)\n", Instance->StartLba + Lba, Offset, *NumBytes, Buffer));
-
- TempStatus = EFI_SUCCESS;
-
- // Cache the block size to avoid de-referencing pointers all the time
- BlockSize = Instance->Media.BlockSize;
-
- DEBUG ((DEBUG_BLKIO, "FvbRead: Check if (Offset=0x%x + NumBytes=0x%x) <= BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
-
- // The read must not span block boundaries.
- // We need to check each variable individually because adding two large values together overflows.
- if ((Offset >= BlockSize) ||
- (*NumBytes > BlockSize) ||
- ((Offset + *NumBytes) > BlockSize))
- {
- DEBUG ((DEBUG_ERROR, "FvbRead: ERROR - EFI_BAD_BUFFER_SIZE: (Offset=0x%x + NumBytes=0x%x) > BlockSize=0x%x\n", Offset, *NumBytes, BlockSize));
- return EFI_BAD_BUFFER_SIZE;
- }
-
- // We must have some bytes to read
- if (*NumBytes == 0) {
- return EFI_BAD_BUFFER_SIZE;
- }
-
- // Decide if we are doing full block reads or not.
- if (*NumBytes % BlockSize != 0) {
- TempStatus = NorFlashRead (Instance, Instance->StartLba + Lba, Offset, *NumBytes, Buffer);
- if (EFI_ERROR (TempStatus)) {
- return EFI_DEVICE_ERROR;
- }
- } else {
- // Read NOR Flash data into shadow buffer
- TempStatus = NorFlashReadBlocks (Instance, Instance->StartLba + Lba, BlockSize, Buffer);
- if (EFI_ERROR (TempStatus)) {
- // Return one of the pre-approved error statuses
- return EFI_DEVICE_ERROR;
- }
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Writes the specified number of bytes from the input buffer to the block.
-
- The Write() function writes the specified number of bytes from
- the provided buffer to the specified block and offset. If the
- firmware volume is sticky write, the caller must ensure that
- all the bits of the specified range to write are in the
- EFI_FVB_ERASE_POLARITY state before calling the Write()
- function, or else the result will be unpredictable. This
- unpredictability arises because, for a sticky-write firmware
- volume, a write may negate a bit in the EFI_FVB_ERASE_POLARITY
- state but cannot flip it back again. Before calling the
- Write() function, it is recommended for the caller to first call
- the EraseBlocks() function to erase the specified block to
- write. A block erase cycle will transition bits from the
- (NOT)EFI_FVB_ERASE_POLARITY state back to the
- EFI_FVB_ERASE_POLARITY state. Implementations should be
- mindful that the firmware volume might be in the WriteDisabled
- state. If it is in this state, the Write() function must
- return the status code EFI_ACCESS_DENIED without modifying the
- contents of the firmware volume. The Write() function must
- also prevent spanning block boundaries. If a write is
- requested that spans a block boundary, the write must store up
- to the boundary but not beyond. The output parameter NumBytes
- must be set to correctly indicate the number of bytes actually
- written. The caller must be aware that a write may be
- partially completed. All writes, partial or otherwise, must be
- fully flushed to the hardware before the Write() service
- returns.
-
- @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance.
-
- @param Lba The starting logical block index to write to.
-
- @param Offset Offset into the block at which to begin writing.
-
- @param NumBytes The pointer to a UINTN.
- At entry, *NumBytes contains the total size of the buffer.
- At exit, *NumBytes contains the total number of bytes actually written.
-
- @param Buffer The pointer to a caller-allocated buffer that contains the source for the write.
-
- @retval EFI_SUCCESS The firmware volume was written successfully.
-
- @retval EFI_BAD_BUFFER_SIZE The write was attempted across an LBA boundary.
- On output, NumBytes contains the total number of bytes
- actually written.
-
- @retval EFI_ACCESS_DENIED The firmware volume is in the WriteDisabled state.
-
- @retval EFI_DEVICE_ERROR The block device is malfunctioning and could not be written.
-
-
- **/
-EFI_STATUS
-EFIAPI
-FvbWrite (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- IN EFI_LBA Lba,
- IN UINTN Offset,
- IN OUT UINTN *NumBytes,
- IN UINT8 *Buffer
- )
-{
- NOR_FLASH_INSTANCE *Instance;
-
- Instance = INSTANCE_FROM_FVB_THIS (This);
-
- return NorFlashWriteSingleBlock (Instance, Instance->StartLba + Lba, Offset, NumBytes, Buffer);
-}
-
-/**
- Erases and initialises a firmware volume block.
-
- The EraseBlocks() function erases one or more blocks as denoted
- by the variable argument list. The entire parameter list of
- blocks must be verified before erasing any blocks. If a block is
- requested that does not exist within the associated firmware
- volume (it has a larger index than the last block of the
- firmware volume), the EraseBlocks() function must return the
- status code EFI_INVALID_PARAMETER without modifying the contents
- of the firmware volume. Implementations should be mindful that
- the firmware volume might be in the WriteDisabled state. If it
- is in this state, the EraseBlocks() function must return the
- status code EFI_ACCESS_DENIED without modifying the contents of
- the firmware volume. All calls to EraseBlocks() must be fully
- flushed to the hardware before the EraseBlocks() service
- returns.
-
- @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL
- instance.
-
- @param ... The variable argument list is a list of tuples.
- Each tuple describes a range of LBAs to erase
- and consists of the following:
- - An EFI_LBA that indicates the starting LBA
- - A UINTN that indicates the number of blocks to erase.
-
- The list is terminated with an EFI_LBA_LIST_TERMINATOR.
- For example, the following indicates that two ranges of blocks
- (5-7 and 10-11) are to be erased:
- EraseBlocks (This, 5, 3, 10, 2, EFI_LBA_LIST_TERMINATOR);
-
- @retval EFI_SUCCESS The erase request successfully completed.
-
- @retval EFI_ACCESS_DENIED The firmware volume is in the WriteDisabled state.
-
- @retval EFI_DEVICE_ERROR The block device is not functioning correctly and could not be written.
- The firmware device may have been partially erased.
-
- @retval EFI_INVALID_PARAMETER One or more of the LBAs listed in the variable argument list do
- not exist in the firmware volume.
-
- **/
-EFI_STATUS
-EFIAPI
-FvbEraseBlocks (
- IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This,
- ...
- )
-{
- EFI_STATUS Status;
- VA_LIST Args;
- UINTN BlockAddress; // Physical address of Lba to erase
- EFI_LBA StartingLba; // Lba from which we start erasing
- UINTN NumOfLba; // Number of Lba blocks to erase
- NOR_FLASH_INSTANCE *Instance;
-
- Instance = INSTANCE_FROM_FVB_THIS (This);
-
- DEBUG ((DEBUG_BLKIO, "FvbEraseBlocks()\n"));
-
- Status = EFI_SUCCESS;
-
- // Detect WriteDisabled state
- if (Instance->Media.ReadOnly == TRUE) {
- // Firmware volume is in WriteDisabled state
- DEBUG ((DEBUG_ERROR, "FvbEraseBlocks: ERROR - Device is in WriteDisabled state.\n"));
- return EFI_ACCESS_DENIED;
- }
-
- // Before erasing, check the entire list of parameters to ensure all specified blocks are valid
-
- VA_START (Args, This);
- do {
- // Get the Lba from which we start erasing
- StartingLba = VA_ARG (Args, EFI_LBA);
-
- // Have we reached the end of the list?
- if (StartingLba == EFI_LBA_LIST_TERMINATOR) {
- // Exit the while loop
- break;
- }
-
- // How many Lba blocks are we requested to erase?
- NumOfLba = VA_ARG (Args, UINTN);
-
- // All blocks must be within range
- DEBUG ((
- DEBUG_BLKIO,
- "FvbEraseBlocks: Check if: ( StartingLba=%ld + NumOfLba=%Lu - 1 ) > LastBlock=%ld.\n",
- Instance->StartLba + StartingLba,
- (UINT64)NumOfLba,
- Instance->Media.LastBlock
- ));
- if ((NumOfLba == 0) || ((Instance->StartLba + StartingLba + NumOfLba - 1) > Instance->Media.LastBlock)) {
- VA_END (Args);
- DEBUG ((DEBUG_ERROR, "FvbEraseBlocks: ERROR - Lba range goes past the last Lba.\n"));
- Status = EFI_INVALID_PARAMETER;
- goto EXIT;
- }
- } while (TRUE);
-
- VA_END (Args);
-
- //
- // To get here, all must be ok, so start erasing
- //
- VA_START (Args, This);
- do {
- // Get the Lba from which we start erasing
- StartingLba = VA_ARG (Args, EFI_LBA);
-
- // Have we reached the end of the list?
- if (StartingLba == EFI_LBA_LIST_TERMINATOR) {
- // Exit the while loop
- break;
- }
-
- // How many Lba blocks are we requested to erase?
- NumOfLba = VA_ARG (Args, UINTN);
-
- // Go through each one and erase it
- while (NumOfLba > 0) {
- // Get the physical address of Lba to erase
- BlockAddress = GET_NOR_BLOCK_ADDRESS (
- Instance->RegionBaseAddress,
- Instance->StartLba + StartingLba,
- Instance->Media.BlockSize
- );
-
- // Erase it
- DEBUG ((DEBUG_BLKIO, "FvbEraseBlocks: Erasing Lba=%ld @ 0x%08x.\n", Instance->StartLba + StartingLba, BlockAddress));
- Status = NorFlashUnlockAndEraseSingleBlock (Instance, BlockAddress);
- if (EFI_ERROR (Status)) {
- VA_END (Args);
- Status = EFI_DEVICE_ERROR;
- goto EXIT;
- }
-
- // Move to the next Lba
- StartingLba++;
- NumOfLba--;
- }
- } while (TRUE);
-
- VA_END (Args);
-
-EXIT:
- return Status;
-}
-
-/**
- Fixup internal data so that EFI can be call in virtual mode.
- Call the passed in Child Notify event and convert any pointers in
- lib to virtual mode.
-
- @param[in] Event The Event that is being processed
- @param[in] Context Event Context
-**/
-VOID
-EFIAPI
-FvbVirtualNotifyEvent (
- IN EFI_EVENT Event,
- IN VOID *Context
- )
-{
- EfiConvertPointer (0x0, (VOID **)&mFlashNvStorageVariableBase);
- return;
-}
diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.c b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.c
deleted file mode 100644
index b72ad97b0b..0000000000
--- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.c
+++ /dev/null
@@ -1,383 +0,0 @@
-/** @file NorFlashStandaloneMm.c
-
- Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.
- Copyright (c) 2020, Linaro, Ltd. All rights reserved.
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include
-#include
-#include
-
-#include "NorFlash.h"
-
-//
-// Global variable declarations
-//
-NOR_FLASH_INSTANCE **mNorFlashInstances;
-UINT32 mNorFlashDeviceCount;
-UINTN mFlashNvStorageVariableBase;
-
-NOR_FLASH_INSTANCE mNorFlashInstanceTemplate = {
- NOR_FLASH_SIGNATURE, // Signature
- NULL, // Handle ... NEED TO BE FILLED
-
- 0, // DeviceBaseAddress ... NEED TO BE FILLED
- 0, // RegionBaseAddress ... NEED TO BE FILLED
- 0, // Size ... NEED TO BE FILLED
- 0, // StartLba
-
- {
- EFI_BLOCK_IO_PROTOCOL_REVISION2, // Revision
- NULL, // Media ... NEED TO BE FILLED
- NULL, // Reset;
- NULL, // ReadBlocks
- NULL, // WriteBlocks
- NULL // FlushBlocks
- }, // BlockIoProtocol
-
- {
- 0, // MediaId ... NEED TO BE FILLED
- FALSE, // RemovableMedia
- TRUE, // MediaPresent
- FALSE, // LogicalPartition
- FALSE, // ReadOnly
- FALSE, // WriteCaching;
- 0, // BlockSize ... NEED TO BE FILLED
- 4, // IoAlign
- 0, // LastBlock ... NEED TO BE FILLED
- 0, // LowestAlignedLba
- 1, // LogicalBlocksPerPhysicalBlock
- }, // Media;
-
- {
- EFI_DISK_IO_PROTOCOL_REVISION, // Revision
- NULL, // ReadDisk
- NULL // WriteDisk
- },
-
- {
- FvbGetAttributes, // GetAttributes
- FvbSetAttributes, // SetAttributes
- FvbGetPhysicalAddress, // GetPhysicalAddress
- FvbGetBlockSize, // GetBlockSize
- FvbRead, // Read
- FvbWrite, // Write
- FvbEraseBlocks, // EraseBlocks
- NULL, // ParentHandle
- }, // FvbProtoccol;
- NULL, // ShadowBuffer
- {
- {
- {
- HARDWARE_DEVICE_PATH,
- HW_VENDOR_DP,
- {
- (UINT8)(OFFSET_OF (NOR_FLASH_DEVICE_PATH, End)),
- (UINT8)(OFFSET_OF (NOR_FLASH_DEVICE_PATH, End) >> 8)
- }
- },
- { 0x0, 0x0, 0x0, { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }
- }, // GUID ... NEED TO BE FILLED
- },
- 0, // Index
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- { sizeof (EFI_DEVICE_PATH_PROTOCOL), 0 }
- }
- } // DevicePath
-};
-
-EFI_STATUS
-NorFlashCreateInstance (
- IN UINTN NorFlashDeviceBase,
- IN UINTN NorFlashRegionBase,
- IN UINTN NorFlashSize,
- IN UINT32 Index,
- IN UINT32 BlockSize,
- IN BOOLEAN SupportFvb,
- OUT NOR_FLASH_INSTANCE **NorFlashInstance
- )
-{
- EFI_STATUS Status;
- NOR_FLASH_INSTANCE *Instance;
-
- ASSERT (NorFlashInstance != NULL);
-
- Instance = AllocateRuntimeCopyPool (sizeof (NOR_FLASH_INSTANCE), &mNorFlashInstanceTemplate);
- if (Instance == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- Instance->DeviceBaseAddress = NorFlashDeviceBase;
- Instance->RegionBaseAddress = NorFlashRegionBase;
- Instance->Size = NorFlashSize;
-
- Instance->BlockIoProtocol.Media = &Instance->Media;
- Instance->Media.MediaId = Index;
- Instance->Media.BlockSize = BlockSize;
- Instance->Media.LastBlock = (NorFlashSize / BlockSize)-1;
-
- CopyGuid (&Instance->DevicePath.Vendor.Guid, &gEfiCallerIdGuid);
- Instance->DevicePath.Index = (UINT8)Index;
-
- Instance->ShadowBuffer = AllocateRuntimePool (BlockSize);
- if (Instance->ShadowBuffer == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- if (SupportFvb) {
- NorFlashFvbInitialize (Instance);
-
- Status = gMmst->MmInstallProtocolInterface (
- &Instance->Handle,
- &gEfiSmmFirmwareVolumeBlockProtocolGuid,
- EFI_NATIVE_INTERFACE,
- &Instance->FvbProtocol
- );
- if (EFI_ERROR (Status)) {
- FreePool (Instance);
- return Status;
- }
- } else {
- DEBUG ((DEBUG_ERROR, "standalone MM NOR Flash driver only support FVB.\n"));
- FreePool (Instance);
- return EFI_UNSUPPORTED;
- }
-
- *NorFlashInstance = Instance;
- return Status;
-}
-
-/**
- * This function unlock and erase an entire NOR Flash block.
- **/
-EFI_STATUS
-NorFlashUnlockAndEraseSingleBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN UINTN BlockAddress
- )
-{
- EFI_STATUS Status;
- UINTN Index;
-
- Index = 0;
- // The block erase might fail a first time (SW bug ?). Retry it ...
- do {
- // Unlock the block if we have to
- Status = NorFlashUnlockSingleBlockIfNecessary (Instance, BlockAddress);
- if (EFI_ERROR (Status)) {
- break;
- }
-
- Status = NorFlashEraseSingleBlock (Instance, BlockAddress);
- Index++;
- } while ((Index < NOR_FLASH_ERASE_RETRY) && (Status == EFI_WRITE_PROTECTED));
-
- if (Index == NOR_FLASH_ERASE_RETRY) {
- DEBUG ((DEBUG_ERROR, "EraseSingleBlock(BlockAddress=0x%08x: Block Locked Error (try to erase %d times)\n", BlockAddress, Index));
- }
-
- return Status;
-}
-
-EFI_STATUS
-NorFlashWriteFullBlock (
- IN NOR_FLASH_INSTANCE *Instance,
- IN EFI_LBA Lba,
- IN UINT32 *DataBuffer,
- IN UINT32 BlockSizeInWords
- )
-{
- EFI_STATUS Status;
- UINTN WordAddress;
- UINT32 WordIndex;
- UINTN BufferIndex;
- UINTN BlockAddress;
- UINTN BuffersInBlock;
- UINTN RemainingWords;
- UINTN Cnt;
-
- Status = EFI_SUCCESS;
-
- // Get the physical address of the block
- BlockAddress = GET_NOR_BLOCK_ADDRESS (Instance->RegionBaseAddress, Lba, BlockSizeInWords * 4);
-
- // Start writing from the first address at the start of the block
- WordAddress = BlockAddress;
-
- Status = NorFlashUnlockAndEraseSingleBlock (Instance, BlockAddress);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "WriteSingleBlock: ERROR - Failed to Unlock and Erase the single block at 0x%X\n", BlockAddress));
- goto EXIT;
- }
-
- // To speed up the programming operation, NOR Flash is programmed using the Buffered Programming method.
-
- // Check that the address starts at a 32-word boundary, i.e. last 7 bits must be zero
- if ((WordAddress & BOUNDARY_OF_32_WORDS) == 0x00) {
- // First, break the entire block into buffer-sized chunks.
- BuffersInBlock = (UINTN)(BlockSizeInWords * 4) / P30_MAX_BUFFER_SIZE_IN_BYTES;
-
- // Then feed each buffer chunk to the NOR Flash
- // If a buffer does not contain any data, don't write it.
- for (BufferIndex = 0;
- BufferIndex < BuffersInBlock;
- BufferIndex++, WordAddress += P30_MAX_BUFFER_SIZE_IN_BYTES, DataBuffer += P30_MAX_BUFFER_SIZE_IN_WORDS
- )
- {
- // Check the buffer to see if it contains any data (not set all 1s).
- for (Cnt = 0; Cnt < P30_MAX_BUFFER_SIZE_IN_WORDS; Cnt++) {
- if (~DataBuffer[Cnt] != 0 ) {
- // Some data found, write the buffer.
- Status = NorFlashWriteBuffer (
- Instance,
- WordAddress,
- P30_MAX_BUFFER_SIZE_IN_BYTES,
- DataBuffer
- );
- if (EFI_ERROR (Status)) {
- goto EXIT;
- }
-
- break;
- }
- }
- }
-
- // Finally, finish off any remaining words that are less than the maximum size of the buffer
- RemainingWords = BlockSizeInWords % P30_MAX_BUFFER_SIZE_IN_WORDS;
-
- if (RemainingWords != 0) {
- Status = NorFlashWriteBuffer (Instance, WordAddress, (RemainingWords * 4), DataBuffer);
- if (EFI_ERROR (Status)) {
- goto EXIT;
- }
- }
- } else {
- // For now, use the single word programming algorithm
- // It is unlikely that the NOR Flash will exist in an address which falls within a 32 word boundary range,
- // i.e. which ends in the range 0x......01 - 0x......7F.
- for (WordIndex = 0; WordIndex < BlockSizeInWords; WordIndex++, DataBuffer++, WordAddress = WordAddress + 4) {
- Status = NorFlashWriteSingleWord (Instance, WordAddress, *DataBuffer);
- if (EFI_ERROR (Status)) {
- goto EXIT;
- }
- }
- }
-
-EXIT:
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "NOR FLASH Programming [WriteSingleBlock] failed at address 0x%08x. Exit Status = \"%r\".\n", WordAddress, Status));
- }
-
- return Status;
-}
-
-EFI_STATUS
-EFIAPI
-NorFlashInitialise (
- IN EFI_HANDLE ImageHandle,
- IN EFI_MM_SYSTEM_TABLE *MmSystemTable
- )
-{
- EFI_STATUS Status;
- UINT32 Index;
- NOR_FLASH_DESCRIPTION *NorFlashDevices;
- BOOLEAN ContainVariableStorage;
-
- Status = NorFlashPlatformInitialization ();
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to initialize Nor Flash devices\n"));
- return Status;
- }
-
- Status = NorFlashPlatformGetDevices (&NorFlashDevices, &mNorFlashDeviceCount);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to get Nor Flash devices\n"));
- return Status;
- }
-
- mNorFlashInstances = AllocatePool (sizeof (NOR_FLASH_INSTANCE *) * mNorFlashDeviceCount);
-
- for (Index = 0; Index < mNorFlashDeviceCount; Index++) {
- // Check if this NOR Flash device contain the variable storage region
-
- if (FixedPcdGet64 (PcdFlashNvStorageVariableBase64) != 0) {
- ContainVariableStorage =
- (NorFlashDevices[Index].RegionBaseAddress <= FixedPcdGet64 (PcdFlashNvStorageVariableBase64)) &&
- (FixedPcdGet64 (PcdFlashNvStorageVariableBase64) + FixedPcdGet32 (PcdFlashNvStorageVariableSize) <=
- NorFlashDevices[Index].RegionBaseAddress + NorFlashDevices[Index].Size);
- } else {
- ContainVariableStorage =
- (NorFlashDevices[Index].RegionBaseAddress <= FixedPcdGet32 (PcdFlashNvStorageVariableBase)) &&
- (FixedPcdGet32 (PcdFlashNvStorageVariableBase) + FixedPcdGet32 (PcdFlashNvStorageVariableSize) <=
- NorFlashDevices[Index].RegionBaseAddress + NorFlashDevices[Index].Size);
- }
-
- Status = NorFlashCreateInstance (
- NorFlashDevices[Index].DeviceBaseAddress,
- NorFlashDevices[Index].RegionBaseAddress,
- NorFlashDevices[Index].Size,
- Index,
- NorFlashDevices[Index].BlockSize,
- ContainVariableStorage,
- &mNorFlashInstances[Index]
- );
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "NorFlashInitialise: Fail to create instance for NorFlash[%d]\n", Index));
- }
- }
-
- return Status;
-}
-
-EFI_STATUS
-EFIAPI
-NorFlashFvbInitialize (
- IN NOR_FLASH_INSTANCE *Instance
- )
-{
- EFI_STATUS Status;
- UINT32 FvbNumLba;
-
- ASSERT ((Instance != NULL));
-
- mFlashNvStorageVariableBase = (FixedPcdGet64 (PcdFlashNvStorageVariableBase64) != 0) ?
- FixedPcdGet64 (PcdFlashNvStorageVariableBase64) : FixedPcdGet32 (PcdFlashNvStorageVariableBase);
- // Set the index of the first LBA for the FVB
- Instance->StartLba = (mFlashNvStorageVariableBase - Instance->RegionBaseAddress) / Instance->Media.BlockSize;
-
- // Determine if there is a valid header at the beginning of the NorFlash
- Status = ValidateFvHeader (Instance);
-
- // Install the Default FVB header if required
- if (EFI_ERROR (Status)) {
- // There is no valid header, so time to install one.
- DEBUG ((DEBUG_INFO, "%a: The FVB Header is not valid.\n", __FUNCTION__));
- DEBUG ((
- DEBUG_INFO,
- "%a: Installing a correct one for this volume.\n",
- __FUNCTION__
- ));
-
- // Erase all the NorFlash that is reserved for variable storage
- FvbNumLba = (PcdGet32 (PcdFlashNvStorageVariableSize) + PcdGet32 (PcdFlashNvStorageFtwWorkingSize) + PcdGet32 (PcdFlashNvStorageFtwSpareSize)) / Instance->Media.BlockSize;
-
- Status = FvbEraseBlocks (&Instance->FvbProtocol, (EFI_LBA)0, FvbNumLba, EFI_LBA_LIST_TERMINATOR);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- // Install all appropriate headers
- Status = InitializeFvAndVariableStoreHeaders (Instance);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- }
-
- return Status;
-}
diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.inf b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.inf
deleted file mode 100644
index b8dddd5cbe..0000000000
--- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.inf
+++ /dev/null
@@ -1,66 +0,0 @@
-#/** @file
-#
-# Component description file for NorFlashStandaloneMm module
-#
-# Copyright (c) 2011 - 2021, Arm Limited. All rights reserved.
-# Copyright (c) 2020, Linaro, Ltd. All rights reserved.
-#
-# SPDX-License-Identifier: BSD-2-Clause-Patent
-#
-#**/
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = ArmVeNorFlashStandaloneMm
- FILE_GUID = e67d82ad-cd56-4071-9151-95ee44990bb0
- MODULE_TYPE = MM_STANDALONE
- VERSION_STRING = 1.0
- PI_SPECIFICATION_VERSION = 0x00010032
- ENTRY_POINT = NorFlashInitialise
-
-[Sources.common]
- NorFlash.h
- NorFlash.c
- NorFlashStandaloneMm.c
- NorFlashFvb.c
-
-[Packages]
- MdePkg/MdePkg.dec
- MdeModulePkg/MdeModulePkg.dec
- ArmPlatformPkg/ArmPlatformPkg.dec
- EmbeddedPkg/EmbeddedPkg.dec
-
-[LibraryClasses]
- BaseLib
- BaseMemoryLib
- DebugLib
- IoLib
- MemoryAllocationLib
- MmServicesTableLib
- NorFlashPlatformLib
- StandaloneMmDriverEntryPoint
-
-[Guids]
- gEfiSystemNvDataFvGuid
- gEfiVariableGuid
- gEfiAuthenticatedVariableGuid
-
-[Protocols]
- gEfiSmmFirmwareVolumeBlockProtocolGuid
-
-[FixedPcd]
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
-
-[FeaturePcd]
- gArmPlatformTokenSpaceGuid.PcdNorFlashCheckBlockLocked
-
-[Depex]
- TRUE
diff --git a/ArmPlatformPkg/Include/Library/NorFlashPlatformLib.h b/ArmPlatformPkg/Include/Library/NorFlashPlatformLib.h
deleted file mode 100644
index 6ef5b70e99..0000000000
--- a/ArmPlatformPkg/Include/Library/NorFlashPlatformLib.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/** @file
-
- Copyright (c) 2011-2012, ARM Ltd. All rights reserved.
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
- **/
-
-#ifndef _NORFLASHPLATFORMLIB_H_
-#define _NORFLASHPLATFORMLIB_H_
-
-typedef struct {
- UINTN DeviceBaseAddress; // Start address of the Device Base Address (DBA)
- UINTN RegionBaseAddress; // Start address of one single region
- UINTN Size;
- UINTN BlockSize;
-} NOR_FLASH_DESCRIPTION;
-
-EFI_STATUS
-NorFlashPlatformInitialization (
- VOID
- );
-
-EFI_STATUS
-NorFlashPlatformGetDevices (
- OUT NOR_FLASH_DESCRIPTION **NorFlashDescriptions,
- OUT UINT32 *Count
- );
-
-#endif /* _NORFLASHPLATFORMLIB_H_ */
diff --git a/ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.c b/ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.c
deleted file mode 100644
index 6e11b23fdb..0000000000
--- a/ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/** @file
-
- Copyright (c) 2014, Linaro Ltd. All rights reserved.
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
- **/
-
-#include
-
-EFI_STATUS
-NorFlashPlatformInitialization (
- VOID
- )
-{
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-NorFlashPlatformGetDevices (
- OUT NOR_FLASH_DESCRIPTION **NorFlashDescriptions,
- OUT UINT32 *Count
- )
-{
- *NorFlashDescriptions = NULL;
- *Count = 0;
- return EFI_SUCCESS;
-}
diff --git a/ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.inf b/ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.inf
deleted file mode 100644
index 3a2d5a1715..0000000000
--- a/ArmPlatformPkg/Library/NorFlashPlatformNullLib/NorFlashPlatformNullLib.inf
+++ /dev/null
@@ -1,24 +0,0 @@
-#/** @file
-#
-# Component description file for NorFlashPlatformNullLib module
-#
-# Copyright (c) 2017, Linaro Ltd. All rights reserved.
-#
-# SPDX-License-Identifier: BSD-2-Clause-Patent
-#
-#**/
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = NorFlashPlatformNullLib
- FILE_GUID = 29b733ad-d066-4df6-8a89-b9df1beb818a
- MODULE_TYPE = DXE_DRIVER
- VERSION_STRING = 1.0
- LIBRARY_CLASS = NorFlashPlatformLib
-
-[Sources.common]
- NorFlashPlatformNullLib.c
-
-[Packages]
- MdePkg/MdePkg.dec
- ArmPlatformPkg/ArmPlatformPkg.dec