Add new adding ATA related status code in PI 1.3 to definition and ATA modules.

Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>


git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14535 6f19259b-4bc3-4df7-8a09-765794883524
This commit is contained in:
Elvin Li
2013-08-09 03:39:37 +00:00
committed by li-elvin
parent 433a21cba1
commit cffd21712f
3 changed files with 62 additions and 6 deletions

View File

@@ -1,7 +1,7 @@
/** @file
Header file for AHCI mode of ATA host controller.
Copyright (c) 2010 - 2012, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2010 - 2013, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -2296,9 +2296,18 @@ IdeAtaSmartReturnStatusCheck (
);
if (EFI_ERROR (Status)) {
REPORT_STATUS_CODE (
EFI_ERROR_CODE | EFI_ERROR_MINOR,
(EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_DISABLED)
);
return EFI_DEVICE_ERROR;
}
REPORT_STATUS_CODE (
EFI_PROGRESS_CODE,
(EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_ENABLE)
);
LBAMid = IdeReadPortB (Instance->PciIo, Instance->IdeRegisters[Channel].CylinderLsb);
LBAHigh = IdeReadPortB (Instance->PciIo, Instance->IdeRegisters[Channel].CylinderMsb);
@@ -2307,12 +2316,19 @@ IdeAtaSmartReturnStatusCheck (
// The threshold exceeded condition is not detected by the device
//
DEBUG ((EFI_D_INFO, "The S.M.A.R.T threshold exceeded condition is not detected\n"));
REPORT_STATUS_CODE (
EFI_PROGRESS_CODE,
(EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_UNDERTHRESHOLD)
);
} else if ((LBAMid == 0xf4) && (LBAHigh == 0x2c)) {
//
// The threshold exceeded condition is detected by the device
//
DEBUG ((EFI_D_INFO, "The S.M.A.R.T threshold exceeded condition is detected\n"));
REPORT_STATUS_CODE (
EFI_PROGRESS_CODE,
(EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_OVERTHRESHOLD)
);
}
return EFI_SUCCESS;
@@ -2350,12 +2366,21 @@ IdeAtaSmartSupport (
//
DEBUG ((EFI_D_INFO, "S.M.A.R.T feature is not supported at [%a] channel [%a] device!\n",
(Channel == 1) ? "secondary" : "primary", (Device == 1) ? "slave" : "master"));
REPORT_STATUS_CODE (
EFI_ERROR_CODE | EFI_ERROR_MINOR,
(EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_NOTSUPPORTED)
);
} else {
//
// Check if the feature is enabled. If not, then enable S.M.A.R.T.
//
if ((IdentifyData->AtaData.command_set_feature_enb_85 & 0x0001) != 0x0001) {
REPORT_STATUS_CODE (
EFI_PROGRESS_CODE,
(EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_DISABLE)
);
ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
AtaCommandBlock.AtaCommand = ATA_CMD_SMART;