sravan/system76-edk2
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

MdeModulePkg: Clean up source files

Browse Source 
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This commit is contained in:
Liming Gao
2018-06-27 21:08:52 +08:00
parent ca79bab7af
commit d1102dba72
1010 changed files with 13588 additions and 13588 deletions
Download Patch File Download Diff File Expand all files Collapse all files

208
MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsBlockIoPei.c
View File

@@ -1,6 +1,6 @@
/** @file
Copyright (c) 2014 - 2017, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -153,10 +153,10 @@ UFS_PEIM_HC_PRIVATE_DATA gUfsHcPeimTemplate = {
EFI_STATUS
UfsPeimRequestSense (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UINTN Lun,
IN UINTN Lun,
OUT VOID *DataBuffer,
OUT UINT32 *DataBufferLength
)
)
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_SIX];
@@ -201,10 +201,10 @@ UfsPeimRequestSense (
EFI_STATUS
UfsPeimTestUnitReady (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UINTN Lun,
IN UINTN Lun,
OUT VOID *SenseData, OPTIONAL
OUT UINT8 *SenseDataLength
)
)
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_SIX];
@@ -254,7 +254,7 @@ UfsPeimInquiry (
OUT UINT32 *InquiryLength,
OUT VOID *SenseData, OPTIONAL
OUT UINT8 *SenseDataLength
)
)
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_SIX];
@@ -311,7 +311,7 @@ UfsPeimReadCapacity (
OUT UINT32 *DataLength,
OUT VOID *SenseData, OPTIONAL
OUT UINT8 *SenseDataLength
)
)
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_TEN];
@@ -367,7 +367,7 @@ UfsPeimReadCapacity16 (
OUT UINT32 *DataLength,
OUT VOID *SenseData, OPTIONAL
OUT UINT8 *SenseDataLength
)
)
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_SIXTEEN];
@@ -429,7 +429,7 @@ UfsPeimRead10 (
OUT UINT32 *DataLength,
OUT VOID *SenseData, OPTIONAL
OUT UINT8 *SenseDataLength
)
)
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_TEN];
@@ -491,7 +491,7 @@ UfsPeimRead16 (
OUT UINT32 *DataLength,
OUT VOID *SenseData, OPTIONAL
OUT UINT8 *SenseDataLength
)
)
{
UFS_SCSI_REQUEST_PACKET Packet;
UINT8 Cdb[UFS_SCSI_OP_LENGTH_SIXTEEN];
@@ -597,16 +597,16 @@ UfsPeimParsingSenseKeys (
/**
Gets the count of block I/O devices that one specific block driver detects.
This function is used for getting the count of block I/O devices that one
This function is used for getting the count of block I/O devices that one
specific block driver detects. To the PEI ATAPI driver, it returns the number
of all the detected ATAPI devices it detects during the enumeration process.
To the PEI legacy floppy driver, it returns the number of all the legacy
devices it finds during its enumeration process. If no device is detected,
then the function will return zero.
@param[in] PeiServices General-purpose services that are available
of all the detected ATAPI devices it detects during the enumeration process.
To the PEI legacy floppy driver, it returns the number of all the legacy
devices it finds during its enumeration process. If no device is detected,
then the function will return zero.
@param[in] PeiServices General-purpose services that are available
to every PEIM.
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI
instance.
@param[out] NumberBlockDevices The number of block I/O devices discovered.
@@ -633,41 +633,41 @@ UfsBlockIoPeimGetDeviceNo (
/**
Gets a block device's media information.
This function will provide the caller with the specified block device's media
information. If the media changes, calling this function will update the media
This function will provide the caller with the specified block device's media
information. If the media changes, calling this function will update the media
information accordingly.
@param[in] PeiServices General-purpose services that are available to every
PEIM
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
@param[in] DeviceIndex Specifies the block device to which the function wants
to talk. Because the driver that implements Block I/O
PPIs will manage multiple block devices, the PPIs that
want to talk to a single device must specify the
@param[in] DeviceIndex Specifies the block device to which the function wants
to talk. Because the driver that implements Block I/O
PPIs will manage multiple block devices, the PPIs that
want to talk to a single device must specify the
device index that was assigned during the enumeration
process. This index is a number from one to
process. This index is a number from one to
NumberBlockDevices.
@param[out] MediaInfo The media information of the specified block media.
The caller is responsible for the ownership of this
@param[out] MediaInfo The media information of the specified block media.
The caller is responsible for the ownership of this
data structure.
@par Note:
The MediaInfo structure describes an enumeration of possible block device
types. This enumeration exists because no device paths are actually passed
across interfaces that describe the type or class of hardware that is publishing
@par Note:
The MediaInfo structure describes an enumeration of possible block device
types. This enumeration exists because no device paths are actually passed
across interfaces that describe the type or class of hardware that is publishing
the block I/O interface. This enumeration will allow for policy decisions
in the Recovery PEIM, such as "Try to recover from legacy floppy first,
LS-120 second, CD-ROM third." If there are multiple partitions abstracted
by a given device type, they should be reported in ascending order; this
order also applies to nested partitions, such as legacy MBR, where the
outermost partitions would have precedence in the reporting order. The
same logic applies to systems such as IDE that have precedence relationships
like "Master/Slave" or "Primary/Secondary". The master device should be
in the Recovery PEIM, such as "Try to recover from legacy floppy first,
LS-120 second, CD-ROM third." If there are multiple partitions abstracted
by a given device type, they should be reported in ascending order; this
order also applies to nested partitions, such as legacy MBR, where the
outermost partitions would have precedence in the reporting order. The
same logic applies to systems such as IDE that have precedence relationships
like "Master/Slave" or "Primary/Secondary". The master device should be
reported first, the slave second.
@retval EFI_SUCCESS Media information about the specified block device
@retval EFI_SUCCESS Media information about the specified block device
was obtained successfully.
@retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
@retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
error.
**/
@@ -687,7 +687,7 @@ UfsBlockIoPeimGetMediaInfo (
EFI_SCSI_DISK_CAPACITY_DATA Capacity;
EFI_SCSI_DISK_CAPACITY_DATA16 Capacity16;
UINTN DataLength;
BOOLEAN NeedRetry;
BOOLEAN NeedRetry;
Private = GET_UFS_PEIM_HC_PRIVATE_DATA_FROM_THIS (This);
NeedRetry = TRUE;
@@ -717,7 +717,7 @@ UfsBlockIoPeimGetMediaInfo (
if (!EFI_ERROR (Status)) {
break;
}
if (SenseDataLength == 0) {
continue;
}
@@ -763,31 +763,31 @@ UfsBlockIoPeimGetMediaInfo (
/**
Reads the requested number of blocks from the specified block device.
The function reads the requested number of blocks from the device. All the
The function reads the requested number of blocks from the device. All the
blocks are read, or an error is returned. If there is no media in the device,
the function returns EFI_NO_MEDIA.
@param[in] PeiServices General-purpose services that are available to
@param[in] PeiServices General-purpose services that are available to
every PEIM.
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
@param[in] DeviceIndex Specifies the block device to which the function wants
to talk. Because the driver that implements Block I/O
PPIs will manage multiple block devices, PPIs that
want to talk to a single device must specify the device
index that was assigned during the enumeration process.
@param[in] DeviceIndex Specifies the block device to which the function wants
to talk. Because the driver that implements Block I/O
PPIs will manage multiple block devices, PPIs that
want to talk to a single device must specify the device
index that was assigned during the enumeration process.
This index is a number from one to NumberBlockDevices.
@param[in] StartLBA The starting logical block address (LBA) to read from
on the device
@param[in] BufferSize The size of the Buffer in bytes. This number must be
a multiple of the intrinsic block size of the device.
@param[out] Buffer A pointer to the destination buffer for the data.
The caller is responsible for the ownership of the
The caller is responsible for the ownership of the
buffer.
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while attempting
@retval EFI_DEVICE_ERROR The device reported an error while attempting
to perform the read operation.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
valid, or the buffer is not properly aligned.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of
@@ -811,7 +811,7 @@ UfsBlockIoPeimReadBlocks (
UFS_PEIM_HC_PRIVATE_DATA *Private;
EFI_SCSI_SENSE_DATA SenseData;
UINT8 SenseDataLength;
BOOLEAN NeedRetry;
BOOLEAN NeedRetry;
Status = EFI_SUCCESS;
NeedRetry = TRUE;
@@ -861,7 +861,7 @@ UfsBlockIoPeimReadBlocks (
if (!EFI_ERROR (Status)) {
break;
}
if (SenseDataLength == 0) {
continue;
}
@@ -903,16 +903,16 @@ UfsBlockIoPeimReadBlocks (
/**
Gets the count of block I/O devices that one specific block driver detects.
This function is used for getting the count of block I/O devices that one
This function is used for getting the count of block I/O devices that one
specific block driver detects. To the PEI ATAPI driver, it returns the number
of all the detected ATAPI devices it detects during the enumeration process.
To the PEI legacy floppy driver, it returns the number of all the legacy
devices it finds during its enumeration process. If no device is detected,
then the function will return zero.
@param[in] PeiServices General-purpose services that are available
of all the detected ATAPI devices it detects during the enumeration process.
To the PEI legacy floppy driver, it returns the number of all the legacy
devices it finds during its enumeration process. If no device is detected,
then the function will return zero.
@param[in] PeiServices General-purpose services that are available
to every PEIM.
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI
instance.
@param[out] NumberBlockDevices The number of block I/O devices discovered.
@@ -939,41 +939,41 @@ UfsBlockIoPeimGetDeviceNo2 (
/**
Gets a block device's media information.
This function will provide the caller with the specified block device's media
information. If the media changes, calling this function will update the media
This function will provide the caller with the specified block device's media
information. If the media changes, calling this function will update the media
information accordingly.
@param[in] PeiServices General-purpose services that are available to every
PEIM
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance.
@param[in] DeviceIndex Specifies the block device to which the function wants
to talk. Because the driver that implements Block I/O
PPIs will manage multiple block devices, the PPIs that
want to talk to a single device must specify the
@param[in] DeviceIndex Specifies the block device to which the function wants
to talk. Because the driver that implements Block I/O
PPIs will manage multiple block devices, the PPIs that
want to talk to a single device must specify the
device index that was assigned during the enumeration
process. This index is a number from one to
process. This index is a number from one to
NumberBlockDevices.
@param[out] MediaInfo The media information of the specified block media.
The caller is responsible for the ownership of this
@param[out] MediaInfo The media information of the specified block media.
The caller is responsible for the ownership of this
data structure.
@par Note:
The MediaInfo structure describes an enumeration of possible block device
types. This enumeration exists because no device paths are actually passed
across interfaces that describe the type or class of hardware that is publishing
@par Note:
The MediaInfo structure describes an enumeration of possible block device
types. This enumeration exists because no device paths are actually passed
across interfaces that describe the type or class of hardware that is publishing
the block I/O interface. This enumeration will allow for policy decisions
in the Recovery PEIM, such as "Try to recover from legacy floppy first,
LS-120 second, CD-ROM third." If there are multiple partitions abstracted
by a given device type, they should be reported in ascending order; this
order also applies to nested partitions, such as legacy MBR, where the
outermost partitions would have precedence in the reporting order. The
same logic applies to systems such as IDE that have precedence relationships
like "Master/Slave" or "Primary/Secondary". The master device should be
in the Recovery PEIM, such as "Try to recover from legacy floppy first,
LS-120 second, CD-ROM third." If there are multiple partitions abstracted
by a given device type, they should be reported in ascending order; this
order also applies to nested partitions, such as legacy MBR, where the
outermost partitions would have precedence in the reporting order. The
same logic applies to systems such as IDE that have precedence relationships
like "Master/Slave" or "Primary/Secondary". The master device should be
reported first, the slave second.
@retval EFI_SUCCESS Media information about the specified block device
@retval EFI_SUCCESS Media information about the specified block device
was obtained successfully.
@retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
@retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware
error.
**/
@@ -991,7 +991,7 @@ UfsBlockIoPeimGetMediaInfo2 (
EFI_PEI_BLOCK_IO_MEDIA Media;
Private = GET_UFS_PEIM_HC_PRIVATE_DATA_FROM_THIS2 (This);
Status = UfsBlockIoPeimGetMediaInfo (
PeiServices,
&Private->BlkIoPpi,
@@ -1009,31 +1009,31 @@ UfsBlockIoPeimGetMediaInfo2 (
/**
Reads the requested number of blocks from the specified block device.
The function reads the requested number of blocks from the device. All the
The function reads the requested number of blocks from the device. All the
blocks are read, or an error is returned. If there is no media in the device,
the function returns EFI_NO_MEDIA.
@param[in] PeiServices General-purpose services that are available to
@param[in] PeiServices General-purpose services that are available to
every PEIM.
@param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance.
@param[in] DeviceIndex Specifies the block device to which the function wants
to talk. Because the driver that implements Block I/O
PPIs will manage multiple block devices, PPIs that
want to talk to a single device must specify the device
index that was assigned during the enumeration process.
@param[in] DeviceIndex Specifies the block device to which the function wants
to talk. Because the driver that implements Block I/O
PPIs will manage multiple block devices, PPIs that
want to talk to a single device must specify the device
index that was assigned during the enumeration process.
This index is a number from one to NumberBlockDevices.
@param[in] StartLBA The starting logical block address (LBA) to read from
on the device
@param[in] BufferSize The size of the Buffer in bytes. This number must be
a multiple of the intrinsic block size of the device.
@param[out] Buffer A pointer to the destination buffer for the data.
The caller is responsible for the ownership of the
The caller is responsible for the ownership of the
buffer.
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while attempting
@retval EFI_DEVICE_ERROR The device reported an error while attempting
to perform the read operation.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
valid, or the buffer is not properly aligned.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of
@@ -1052,7 +1052,7 @@ UfsBlockIoPeimReadBlocks2 (
)
{
EFI_STATUS Status;
UFS_PEIM_HC_PRIVATE_DATA *Private;
UFS_PEIM_HC_PRIVATE_DATA *Private;
Status = EFI_SUCCESS;
Private = GET_UFS_PEIM_HC_PRIVATE_DATA_FROM_THIS2 (This);
@@ -1118,7 +1118,7 @@ UfsEndOfPei (
/**
The user code starts with this function.
@param FileHandle Handle of the file being invoked.
@param PeiServices Describes the list of possible PEI Services.
@@ -1205,8 +1205,8 @@ InitializeUfsBlockIoPeim (
//
// UFS 2.0 spec Section 13.1.3.3:
// At the end of the UFS Interconnect Layer initialization on both host and device side,
// the host shall send a NOP OUT UPIU to verify that the device UTP Layer is ready.
// At the end of the UFS Interconnect Layer initialization on both host and device side,
// the host shall send a NOP OUT UPIU to verify that the device UTP Layer is ready.
//
Status = UfsExecNopCmds (Private);
if (EFI_ERROR (Status)) {
@@ -1241,7 +1241,7 @@ InitializeUfsBlockIoPeim (
DEBUG ((EFI_D_INFO, "Ufs %d Lun %d is enabled\n", Controller, Index));
}
}
PeiServicesInstallPpi (&Private->BlkIoPpiList);
PeiServicesNotifyPpi (&Private->EndOfPeiNotifyList);
Controller++;