EmulatorPkg: Remove all trailing whitespace

Signed-off-by: jljusten

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11919 6f19259b-4bc3-4df7-8a09-765794883524
This commit is contained in:
jljusten
2011-06-28 16:50:26 +00:00
parent bb89ec1a7e
commit d18d8a1d0e
161 changed files with 2566 additions and 2566 deletions

View File

@@ -1,13 +1,13 @@
/**@file
Copyright (c) 2004 - 2009, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
bbe
**/
@@ -50,7 +50,7 @@ EmuBlockIo2Reset (
/**
Read BufferSize bytes from Lba into Buffer.
This function reads the requested number of blocks from the device. All the
blocks are read, or an error is returned.
If EFI_DEVICE_ERROR, EFI_NO_MEDIA,_or EFI_MEDIA_CHANGED is returned and
@@ -58,13 +58,13 @@ EmuBlockIo2Reset (
not be signaled.
@param[in] This Indicates a pointer to the calling context.
@param[in] MediaId Id of the media, changes every time the media is
@param[in] MediaId Id of the media, changes every time the media is
replaced.
@param[in] Lba The starting Logical Block Address to read from.
@param[in, out] Token A pointer to the token associated with the transaction.
@param[in] BufferSize Size of Buffer, must be a multiple of device block size.
@param[out] Buffer A pointer to the destination buffer for the data. The
caller is responsible for either having implicit or
@param[in] BufferSize Size of Buffer, must be a multiple of device block size.
@param[out] Buffer A pointer to the destination buffer for the data. The
caller is responsible for either having implicit or
explicit ownership of the buffer.
@retval EFI_SUCCESS The read request was queued if Token->Event is
@@ -76,7 +76,7 @@ EmuBlockIo2Reset (
@retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
@retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the
intrinsic block size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
or the buffer is not on proper alignment.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack
of resources.
@@ -132,14 +132,14 @@ EmuBlockIo2ReadBlocksEx (
@retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
@retval EFI_DEVICE_ERROR The device reported an error while performing the write.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
or the buffer is not on proper alignment.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack
of resources.
**/
EFI_STATUS
EFIAPI
EFIAPI
EmuBlockIo2WriteBlocksEx (
IN EFI_BLOCK_IO2_PROTOCOL *This,
IN UINT32 MediaId,
@@ -167,10 +167,10 @@ EmuBlockIo2WriteBlocksEx (
/**
Flush the Block Device.
If EFI_DEVICE_ERROR, EFI_NO_MEDIA,_EFI_WRITE_PROTECTED or EFI_MEDIA_CHANGED
is returned and non-blocking I/O is being used, the Event associated with
this request will not be signaled.
this request will not be signaled.
@param[in] This Indicates a pointer to the calling context.
@param[in,out] Token A pointer to the token associated with the transaction
@@ -258,7 +258,7 @@ EmuBlockIoReset (
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHANGED The MediaId does not matched the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
or the buffer is not on proper alignment.
**/
@@ -305,7 +305,7 @@ EmuBlockIoReadBlocks (
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
or the buffer is not on proper alignment.
**/
@@ -370,33 +370,33 @@ EmuBlockIoFlushBlocks (
/**
Tests to see if this driver supports a given controller. If a child device is provided,
Tests to see if this driver supports a given controller. If a child device is provided,
it further tests to see if this driver supports creating a handle for the specified child device.
This function checks to see if the driver specified by This supports the device specified by
ControllerHandle. Drivers will typically use the device path attached to
ControllerHandle and/or the services from the bus I/O abstraction attached to
ControllerHandle to determine if the driver supports ControllerHandle. This function
may be called many times during platform initialization. In order to reduce boot times, the tests
performed by this function must be very small, and take as little time as possible to execute. This
function must not change the state of any hardware devices, and this function must be aware that the
device specified by ControllerHandle may already be managed by the same driver or a
different driver. This function must match its calls to AllocatePages() with FreePages(),
AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
Because ControllerHandle may have been previously started by the same driver, if a protocol is
already in the opened state, then it must not be closed with CloseProtocol(). This is required
This function checks to see if the driver specified by This supports the device specified by
ControllerHandle. Drivers will typically use the device path attached to
ControllerHandle and/or the services from the bus I/O abstraction attached to
ControllerHandle to determine if the driver supports ControllerHandle. This function
may be called many times during platform initialization. In order to reduce boot times, the tests
performed by this function must be very small, and take as little time as possible to execute. This
function must not change the state of any hardware devices, and this function must be aware that the
device specified by ControllerHandle may already be managed by the same driver or a
different driver. This function must match its calls to AllocatePages() with FreePages(),
AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
Because ControllerHandle may have been previously started by the same driver, if a protocol is
already in the opened state, then it must not be closed with CloseProtocol(). This is required
to guarantee the state of ControllerHandle is not modified by this function.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] ControllerHandle The handle of the controller to test. This handle
must support a protocol interface that supplies
@param[in] ControllerHandle The handle of the controller to test. This handle
must support a protocol interface that supplies
an I/O abstraction to the driver.
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
parameter is ignored by device drivers, and is optional for bus
drivers. For bus drivers, if this parameter is not NULL, then
the bus driver must determine if the bus controller specified
by ControllerHandle and the child controller specified
by RemainingDevicePath are both supported by this
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
parameter is ignored by device drivers, and is optional for bus
drivers. For bus drivers, if this parameter is not NULL, then
the bus driver must determine if the bus controller specified
by ControllerHandle and the child controller specified
by RemainingDevicePath are both supported by this
bus driver.
@retval EFI_SUCCESS The device specified by ControllerHandle and
@@ -462,28 +462,28 @@ EmuBlockIoDriverBindingSupported (
Starts a device controller or a bus controller.
The Start() function is designed to be invoked from the EFI boot service ConnectController().
As a result, much of the error checking on the parameters to Start() has been moved into this
common boot service. It is legal to call Start() from other locations,
As a result, much of the error checking on the parameters to Start() has been moved into this
common boot service. It is legal to call Start() from other locations,
but the following calling restrictions must be followed, or the system behavior will not be deterministic.
1. ControllerHandle must be a valid EFI_HANDLE.
2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
EFI_DEVICE_PATH_PROTOCOL.
3. Prior to calling Start(), the Supported() function for the driver specified by This must
have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] ControllerHandle The handle of the controller to start. This handle
must support a protocol interface that supplies
@param[in] ControllerHandle The handle of the controller to start. This handle
must support a protocol interface that supplies
an I/O abstraction to the driver.
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
parameter is ignored by device drivers, and is optional for bus
drivers. For a bus driver, if this parameter is NULL, then handles
for all the children of Controller are created by this driver.
If this parameter is not NULL and the first Device Path Node is
not the End of Device Path Node, then only the handle for the
child device specified by the first Device Path Node of
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
parameter is ignored by device drivers, and is optional for bus
drivers. For a bus driver, if this parameter is NULL, then handles
for all the children of Controller are created by this driver.
If this parameter is not NULL and the first Device Path Node is
not the End of Device Path Node, then only the handle for the
child device specified by the first Device Path Node of
RemainingDevicePath is created by this driver.
If the first Device Path Node of RemainingDevicePath is
If the first Device Path Node of RemainingDevicePath is
the End of Device Path Node, no child handle is created by this
driver.
@@ -508,7 +508,7 @@ EmuBlockIoDriverBindingStart (
//
// Grab the protocols we need
//
Status = gBS->OpenProtocol (
Handle,
&gEmuIoThunkProtocolGuid,
@@ -520,7 +520,7 @@ EmuBlockIoDriverBindingStart (
if (EFI_ERROR (Status)) {
return Status;
}
if (!CompareGuid (EmuIoThunk->Protocol, &gEmuBlockIoProtocolGuid)) {
Status = EFI_UNSUPPORTED;
goto Done;
@@ -540,7 +540,7 @@ EmuBlockIoDriverBindingStart (
Private->IoThunk = EmuIoThunk;
Private->Io = EmuIoThunk->Interface;
Private->EfiHandle = Handle;
Private->BlockIo.Revision = EFI_BLOCK_IO_PROTOCOL_REVISION2;
Private->BlockIo.Media = &Private->Media;
Private->BlockIo.Reset = EmuBlockIoReset;
@@ -568,7 +568,7 @@ EmuBlockIoDriverBindingStart (
EmuIoThunk->ConfigString,
TRUE
);
AddUnicodeString2 (
"en",
gEmuBlockIoComponentName2.SupportedLanguages,
@@ -590,11 +590,11 @@ Done:
if (Private->ControllerNameTable != NULL) {
FreeUnicodeStringTable (Private->ControllerNameTable);
}
gBS->FreePool (Private);
}
gBS->CloseProtocol (
Handle,
&gEmuIoThunkProtocolGuid,
@@ -609,10 +609,10 @@ Done:
/**
Stops a device controller or a bus controller.
The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
As a result, much of the error checking on the parameters to Stop() has been moved
into this common boot service. It is legal to call Stop() from other locations,
The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
As a result, much of the error checking on the parameters to Stop() has been moved
into this common boot service. It is legal to call Stop() from other locations,
but the following calling restrictions must be followed, or the system behavior will not be deterministic.
1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
same driver's Start() function.
@@ -620,13 +620,13 @@ Done:
EFI_HANDLE. In addition, all of these handles must have been created in this driver's
Start() function, and the Start() function must have called OpenProtocol() on
ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] ControllerHandle A handle to the device being stopped. The handle must
support a bus specific I/O protocol for the driver
@param[in] ControllerHandle A handle to the device being stopped. The handle must
support a bus specific I/O protocol for the driver
to use to stop the device.
@param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
@param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
@param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
if NumberOfChildren is 0.
@retval EFI_SUCCESS The device was stopped.
@@ -678,7 +678,7 @@ EmuBlockIoDriverBindingStop (
Handle
);
}
if (!EFI_ERROR (Status)) {
//
// Free our instance data
@@ -709,9 +709,9 @@ EFI_DRIVER_BINDING_PROTOCOL gEmuBlockIoDriverBinding = {
/**
The user Entry Point for module EmuBlockIo . The user code starts with this function.
@param[in] ImageHandle The firmware allocated handle for the EFI image.
@param[in] ImageHandle The firmware allocated handle for the EFI image.
@param[in] SystemTable A pointer to the EFI System Table.
@retval EFI_SUCCESS The entry point is executed successfully.
@retval other Some error occurs when executing this entry point.