EmbeddedPkg: add driver to set graphical/serial console preference

Linux on ARM/arm64 will infer from the presence of a /chosen/stdout-path
DT property or of a SPCR ACPI table that the primary console is the serial
port, even if a graphical console is available as well.

So let's introduce a driver that allows the user to set a preference
between graphical and serial if both are available. If the preference
is set to 'Graphical', and any GOP protocol instances have been installed
by the time the ReadyToBoot event is signalled, remove the DT property
and/or the SPCR table entirely.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This commit is contained in:
Ard Biesheuvel
2017-10-20 14:30:11 +01:00
parent 6e32874427
commit d8e36289ce
7 changed files with 490 additions and 0 deletions

View File

@@ -67,6 +67,9 @@
# File GUID for default DTB image embedded in the firmware volume
gDtPlatformDefaultDtbFileGuid = { 0x25462cda, 0x221f, 0x47df, { 0xac, 0x1d, 0x25, 0x9c, 0xfa, 0xa4, 0xe3, 0x26 } }
# HII form set GUID for ConsolePrefDxe driver
gConsolePrefFormSetGuid = { 0x2d2358b4, 0xe96c, 0x484d, { 0xb2, 0xdd, 0x7c, 0x2e, 0xdf, 0xc7, 0xd5, 0x6f } }
[Protocols.common]
gHardwareInterruptProtocolGuid = { 0x2890B3EA, 0x053D, 0x1643, { 0xAD, 0x0C, 0xD6, 0x48, 0x08, 0xDA, 0x3F, 0xF1 } }
gHardwareInterrupt2ProtocolGuid = { 0x32898322, 0x2da1, 0x474a, { 0xba, 0xaa, 0xf3, 0xf7, 0xcf, 0x56, 0x94, 0x70 } }