NetworkPkg: Clean up source files
1. Do not use tab characters 2. No trailing white space in one line 3. All files must end with CRLF Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Liming Gao <liming.gao@intel.com>
This commit is contained in:
@@ -1,15 +1,15 @@
|
||||
/** @file
|
||||
UEFI HTTP boot driver's private data structure and interfaces declaration.
|
||||
|
||||
Copyright (c) 2015 - 2017, Intel Corporation. All rights reserved.<BR>
|
||||
Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
|
||||
(C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
|
||||
This program and the accompanying materials are licensed and made available under
|
||||
the terms and conditions of the BSD License that accompanies this distribution.
|
||||
This program and the accompanying materials are licensed and made available under
|
||||
the terms and conditions of the BSD License that accompanies this distribution.
|
||||
The full text of the license may be found at
|
||||
http://opensource.org/licenses/bsd-license.php.
|
||||
|
||||
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
||||
http://opensource.org/licenses/bsd-license.php.
|
||||
|
||||
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
||||
|
||||
**/
|
||||
|
||||
@@ -77,7 +77,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
||||
#define HTTP_BOOT_DXE_VERSION 0xa
|
||||
|
||||
//
|
||||
// Standard Media Types defined in
|
||||
// Standard Media Types defined in
|
||||
// http://www.iana.org/assignments/media-types
|
||||
//
|
||||
#define HTTP_CONTENT_TYPE_APP_EFI "application/efi"
|
||||
@@ -136,7 +136,7 @@ struct _HTTP_BOOT_VIRTUAL_NIC {
|
||||
CallbackInfo, \
|
||||
HTTP_BOOT_PRIVATE_DATA_SIGNATURE \
|
||||
)
|
||||
|
||||
|
||||
#define HTTP_BOOT_PRIVATE_DATA_FROM_CALLBACK_PROTOCOL(CallbackProtocol) \
|
||||
CR ( \
|
||||
CallbackProtocol, \
|
||||
@@ -172,7 +172,7 @@ struct _HTTP_BOOT_PRIVATE_DATA {
|
||||
EFI_DHCP6_PROTOCOL *Dhcp6;
|
||||
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
|
||||
|
||||
|
||||
|
||||
//
|
||||
// Produced protocol
|
||||
//
|
||||
@@ -273,33 +273,33 @@ struct _HTTP_BOOT_PRIVATE_DATA {
|
||||
extern EFI_LOAD_FILE_PROTOCOL gHttpBootDxeLoadFile;
|
||||
|
||||
/**
|
||||
Tests to see if this driver supports a given controller. If a child device is provided,
|
||||
Tests to see if this driver supports a given controller. If a child device is provided,
|
||||
it further tests to see if this driver supports creating a handle for the specified child device.
|
||||
|
||||
This function checks to see if the driver specified by This supports the device specified by
|
||||
ControllerHandle. Drivers will typically use the device path attached to
|
||||
ControllerHandle and/or the services from the bus I/O abstraction attached to
|
||||
ControllerHandle to determine if the driver supports ControllerHandle. This function
|
||||
may be called many times during platform initialization. In order to reduce boot times, the tests
|
||||
performed by this function must be very small, and take as little time as possible to execute. This
|
||||
function must not change the state of any hardware devices, and this function must be aware that the
|
||||
device specified by ControllerHandle may already be managed by the same driver or a
|
||||
different driver. This function must match its calls to AllocatePages() with FreePages(),
|
||||
AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
|
||||
Because ControllerHandle may have been previously started by the same driver, if a protocol is
|
||||
already in the opened state, then it must not be closed with CloseProtocol(). This is required
|
||||
This function checks to see if the driver specified by This supports the device specified by
|
||||
ControllerHandle. Drivers will typically use the device path attached to
|
||||
ControllerHandle and/or the services from the bus I/O abstraction attached to
|
||||
ControllerHandle to determine if the driver supports ControllerHandle. This function
|
||||
may be called many times during platform initialization. In order to reduce boot times, the tests
|
||||
performed by this function must be very small, and take as little time as possible to execute. This
|
||||
function must not change the state of any hardware devices, and this function must be aware that the
|
||||
device specified by ControllerHandle may already be managed by the same driver or a
|
||||
different driver. This function must match its calls to AllocatePages() with FreePages(),
|
||||
AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
|
||||
Because ControllerHandle may have been previously started by the same driver, if a protocol is
|
||||
already in the opened state, then it must not be closed with CloseProtocol(). This is required
|
||||
to guarantee the state of ControllerHandle is not modified by this function.
|
||||
|
||||
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
|
||||
@param[in] ControllerHandle The handle of the controller to test. This handle
|
||||
must support a protocol interface that supplies
|
||||
@param[in] ControllerHandle The handle of the controller to test. This handle
|
||||
must support a protocol interface that supplies
|
||||
an I/O abstraction to the driver.
|
||||
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
|
||||
parameter is ignored by device drivers, and is optional for bus
|
||||
drivers. For bus drivers, if this parameter is not NULL, then
|
||||
the bus driver must determine if the bus controller specified
|
||||
by ControllerHandle and the child controller specified
|
||||
by RemainingDevicePath are both supported by this
|
||||
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
|
||||
parameter is ignored by device drivers, and is optional for bus
|
||||
drivers. For bus drivers, if this parameter is not NULL, then
|
||||
the bus driver must determine if the bus controller specified
|
||||
by ControllerHandle and the child controller specified
|
||||
by RemainingDevicePath are both supported by this
|
||||
bus driver.
|
||||
|
||||
@retval EFI_SUCCESS The device specified by ControllerHandle and
|
||||
@@ -326,28 +326,28 @@ HttpBootIp4DxeDriverBindingSupported (
|
||||
Starts a device controller or a bus controller.
|
||||
|
||||
The Start() function is designed to be invoked from the EFI boot service ConnectController().
|
||||
As a result, much of the error checking on the parameters to Start() has been moved into this
|
||||
common boot service. It is legal to call Start() from other locations,
|
||||
As a result, much of the error checking on the parameters to Start() has been moved into this
|
||||
common boot service. It is legal to call Start() from other locations,
|
||||
but the following calling restrictions must be followed, or the system behavior will not be deterministic.
|
||||
1. ControllerHandle must be a valid EFI_HANDLE.
|
||||
2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
|
||||
EFI_DEVICE_PATH_PROTOCOL.
|
||||
3. Prior to calling Start(), the Supported() function for the driver specified by This must
|
||||
have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
|
||||
have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
|
||||
|
||||
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
|
||||
@param[in] ControllerHandle The handle of the controller to start. This handle
|
||||
must support a protocol interface that supplies
|
||||
@param[in] ControllerHandle The handle of the controller to start. This handle
|
||||
must support a protocol interface that supplies
|
||||
an I/O abstraction to the driver.
|
||||
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
|
||||
parameter is ignored by device drivers, and is optional for bus
|
||||
drivers. For a bus driver, if this parameter is NULL, then handles
|
||||
for all the children of Controller are created by this driver.
|
||||
If this parameter is not NULL and the first Device Path Node is
|
||||
not the End of Device Path Node, then only the handle for the
|
||||
child device specified by the first Device Path Node of
|
||||
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
|
||||
parameter is ignored by device drivers, and is optional for bus
|
||||
drivers. For a bus driver, if this parameter is NULL, then handles
|
||||
for all the children of Controller are created by this driver.
|
||||
If this parameter is not NULL and the first Device Path Node is
|
||||
not the End of Device Path Node, then only the handle for the
|
||||
child device specified by the first Device Path Node of
|
||||
RemainingDevicePath is created by this driver.
|
||||
If the first Device Path Node of RemainingDevicePath is
|
||||
If the first Device Path Node of RemainingDevicePath is
|
||||
the End of Device Path Node, no child handle is created by this
|
||||
driver.
|
||||
|
||||
@@ -367,10 +367,10 @@ HttpBootIp4DxeDriverBindingStart (
|
||||
|
||||
/**
|
||||
Stops a device controller or a bus controller.
|
||||
|
||||
The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
|
||||
As a result, much of the error checking on the parameters to Stop() has been moved
|
||||
into this common boot service. It is legal to call Stop() from other locations,
|
||||
|
||||
The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
|
||||
As a result, much of the error checking on the parameters to Stop() has been moved
|
||||
into this common boot service. It is legal to call Stop() from other locations,
|
||||
but the following calling restrictions must be followed, or the system behavior will not be deterministic.
|
||||
1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
|
||||
same driver's Start() function.
|
||||
@@ -378,13 +378,13 @@ HttpBootIp4DxeDriverBindingStart (
|
||||
EFI_HANDLE. In addition, all of these handles must have been created in this driver's
|
||||
Start() function, and the Start() function must have called OpenProtocol() on
|
||||
ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
|
||||
|
||||
|
||||
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
|
||||
@param[in] ControllerHandle A handle to the device being stopped. The handle must
|
||||
support a bus specific I/O protocol for the driver
|
||||
@param[in] ControllerHandle A handle to the device being stopped. The handle must
|
||||
support a bus specific I/O protocol for the driver
|
||||
to use to stop the device.
|
||||
@param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
|
||||
@param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
|
||||
@param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
|
||||
if NumberOfChildren is 0.
|
||||
|
||||
@retval EFI_SUCCESS The device was stopped.
|
||||
@@ -401,33 +401,33 @@ HttpBootIp4DxeDriverBindingStop (
|
||||
);
|
||||
|
||||
/**
|
||||
Tests to see if this driver supports a given controller. If a child device is provided,
|
||||
Tests to see if this driver supports a given controller. If a child device is provided,
|
||||
it further tests to see if this driver supports creating a handle for the specified child device.
|
||||
|
||||
This function checks to see if the driver specified by This supports the device specified by
|
||||
ControllerHandle. Drivers will typically use the device path attached to
|
||||
ControllerHandle and/or the services from the bus I/O abstraction attached to
|
||||
ControllerHandle to determine if the driver supports ControllerHandle. This function
|
||||
may be called many times during platform initialization. In order to reduce boot times, the tests
|
||||
performed by this function must be very small, and take as little time as possible to execute. This
|
||||
function must not change the state of any hardware devices, and this function must be aware that the
|
||||
device specified by ControllerHandle may already be managed by the same driver or a
|
||||
different driver. This function must match its calls to AllocatePages() with FreePages(),
|
||||
AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
|
||||
Because ControllerHandle may have been previously started by the same driver, if a protocol is
|
||||
already in the opened state, then it must not be closed with CloseProtocol(). This is required
|
||||
This function checks to see if the driver specified by This supports the device specified by
|
||||
ControllerHandle. Drivers will typically use the device path attached to
|
||||
ControllerHandle and/or the services from the bus I/O abstraction attached to
|
||||
ControllerHandle to determine if the driver supports ControllerHandle. This function
|
||||
may be called many times during platform initialization. In order to reduce boot times, the tests
|
||||
performed by this function must be very small, and take as little time as possible to execute. This
|
||||
function must not change the state of any hardware devices, and this function must be aware that the
|
||||
device specified by ControllerHandle may already be managed by the same driver or a
|
||||
different driver. This function must match its calls to AllocatePages() with FreePages(),
|
||||
AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
|
||||
Because ControllerHandle may have been previously started by the same driver, if a protocol is
|
||||
already in the opened state, then it must not be closed with CloseProtocol(). This is required
|
||||
to guarantee the state of ControllerHandle is not modified by this function.
|
||||
|
||||
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
|
||||
@param[in] ControllerHandle The handle of the controller to test. This handle
|
||||
must support a protocol interface that supplies
|
||||
@param[in] ControllerHandle The handle of the controller to test. This handle
|
||||
must support a protocol interface that supplies
|
||||
an I/O abstraction to the driver.
|
||||
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
|
||||
parameter is ignored by device drivers, and is optional for bus
|
||||
drivers. For bus drivers, if this parameter is not NULL, then
|
||||
the bus driver must determine if the bus controller specified
|
||||
by ControllerHandle and the child controller specified
|
||||
by RemainingDevicePath are both supported by this
|
||||
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
|
||||
parameter is ignored by device drivers, and is optional for bus
|
||||
drivers. For bus drivers, if this parameter is not NULL, then
|
||||
the bus driver must determine if the bus controller specified
|
||||
by ControllerHandle and the child controller specified
|
||||
by RemainingDevicePath are both supported by this
|
||||
bus driver.
|
||||
|
||||
@retval EFI_SUCCESS The device specified by ControllerHandle and
|
||||
@@ -454,28 +454,28 @@ HttpBootIp6DxeDriverBindingSupported (
|
||||
Starts a device controller or a bus controller.
|
||||
|
||||
The Start() function is designed to be invoked from the EFI boot service ConnectController().
|
||||
As a result, much of the error checking on the parameters to Start() has been moved into this
|
||||
common boot service. It is legal to call Start() from other locations,
|
||||
As a result, much of the error checking on the parameters to Start() has been moved into this
|
||||
common boot service. It is legal to call Start() from other locations,
|
||||
but the following calling restrictions must be followed, or the system behavior will not be deterministic.
|
||||
1. ControllerHandle must be a valid EFI_HANDLE.
|
||||
2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
|
||||
EFI_DEVICE_PATH_PROTOCOL.
|
||||
3. Prior to calling Start(), the Supported() function for the driver specified by This must
|
||||
have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
|
||||
have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
|
||||
|
||||
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
|
||||
@param[in] ControllerHandle The handle of the controller to start. This handle
|
||||
must support a protocol interface that supplies
|
||||
@param[in] ControllerHandle The handle of the controller to start. This handle
|
||||
must support a protocol interface that supplies
|
||||
an I/O abstraction to the driver.
|
||||
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
|
||||
parameter is ignored by device drivers, and is optional for bus
|
||||
drivers. For a bus driver, if this parameter is NULL, then handles
|
||||
for all the children of Controller are created by this driver.
|
||||
If this parameter is not NULL and the first Device Path Node is
|
||||
not the End of Device Path Node, then only the handle for the
|
||||
child device specified by the first Device Path Node of
|
||||
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
|
||||
parameter is ignored by device drivers, and is optional for bus
|
||||
drivers. For a bus driver, if this parameter is NULL, then handles
|
||||
for all the children of Controller are created by this driver.
|
||||
If this parameter is not NULL and the first Device Path Node is
|
||||
not the End of Device Path Node, then only the handle for the
|
||||
child device specified by the first Device Path Node of
|
||||
RemainingDevicePath is created by this driver.
|
||||
If the first Device Path Node of RemainingDevicePath is
|
||||
If the first Device Path Node of RemainingDevicePath is
|
||||
the End of Device Path Node, no child handle is created by this
|
||||
driver.
|
||||
|
||||
@@ -495,10 +495,10 @@ HttpBootIp6DxeDriverBindingStart (
|
||||
|
||||
/**
|
||||
Stops a device controller or a bus controller.
|
||||
|
||||
The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
|
||||
As a result, much of the error checking on the parameters to Stop() has been moved
|
||||
into this common boot service. It is legal to call Stop() from other locations,
|
||||
|
||||
The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
|
||||
As a result, much of the error checking on the parameters to Stop() has been moved
|
||||
into this common boot service. It is legal to call Stop() from other locations,
|
||||
but the following calling restrictions must be followed, or the system behavior will not be deterministic.
|
||||
1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
|
||||
same driver's Start() function.
|
||||
@@ -506,13 +506,13 @@ HttpBootIp6DxeDriverBindingStart (
|
||||
EFI_HANDLE. In addition, all of these handles must have been created in this driver's
|
||||
Start() function, and the Start() function must have called OpenProtocol() on
|
||||
ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
|
||||
|
||||
|
||||
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
|
||||
@param[in] ControllerHandle A handle to the device being stopped. The handle must
|
||||
support a bus specific I/O protocol for the driver
|
||||
@param[in] ControllerHandle A handle to the device being stopped. The handle must
|
||||
support a bus specific I/O protocol for the driver
|
||||
to use to stop the device.
|
||||
@param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
|
||||
@param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
|
||||
@param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
|
||||
if NumberOfChildren is 0.
|
||||
|
||||
@retval EFI_SUCCESS The device was stopped.
|
||||
|
Reference in New Issue
Block a user