Read the coreboot table containing the TPM PPI handoff buffer and
place it in gEfiTcgPhysicalPresenceInfoHob.
coreboot uses the same PPI interface as QEMU does and installs the
corresponding ACPI code to provide a full PPI interface to the OS.
The OS must reboot in order to execute the requests.
The corresponding coreboot patch can be found here:
https://review.coreboot.org/c/coreboot/+/45568
In a follow up commit the OvmfPkg PhysicalPresence library will be used
to confirm TPM PPI request. This is necessary as coreboot doesn't have
input drivers or a graphical UI that could be used.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
This adds support for FVB in order to support a platform independent
and non-volatile variable store on UefiPayloadPkg. It is required for
non-volatile variable support, TPM support, Secureboot support and more.
Since commit bc744f5893fc4d53275ed26dd8d968011c6a09c1 coreboot supports
the SMMSTORE v2 feature. It implements a SMI handler that is able to
write, read and erase pages in the boot media (SPI flash).
The communication is done using a fixed communication buffer that is
allocated in CBMEM. The existence of this optional feature is advertised
by a coreboot table.
When the SMMSTORE feature is not available the variable emulation is used
by setting PcdEmuVariableNvModeEnable to TRUE.
Add a library for SMMStore to be used in DXE.
The DXE component provides runtime services and takes care of virtual to
physical mapping the communication buffers between SMM and OS.
Make use of the APRIORI DXE to initialize an empty store on the first boot
and set the PCDs to sane values before the variable driver is loaded.
Tests on Intel(R) Xeon(R) E-2288G CPU @ 3.70G showed that the SMI isn't
triggered with a probability of 1:40 of all cases when called in a tight
loop. The CPU continues running and the SMI is triggeres asynchronously
a few clock cycles later. coreboot only handels synchronous APM request
and does nothing on asynchronous APM triggers.
As there's no livesign from SMM it's impossible to tell if the handler
has run. Just wait a bit and try again to trigger a synchronous SMI.
Tests confirmed that out of 5 million tries the SMI is now always handled.
Tested on Linux and Windows 10 on real hardware.
Currently this cannot be tested on coreboot and qemu as it doesn't support
the SMMSTORE on qemu.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3100
It is not necessary to have a PEI phase in the UEFI payload since no
specific PEI task is required. This patch adds a UefiPayloadEntry
driver to get UEFI Payload required information from the bootloaders,
convert them into a HOB list, load DXE core and transfer control to it.
Here is the change details:
1) Removed PEI phase, including Peicore, BlSupportPei, SecCore, etc.
2) Added UefiPayloadEntry driver. this is the only driver before DXE core.
3) Added Pure X64 support, dropped Pure IA32 (Could add later if required)
64bit payload with 32bit entry point is still supported.
4) Use one DSC file UefiPayloadPkg.dsc to support X64 and IA32X64 build.
Removed UefiPayloadIa32.dsc and UefiPayloadIa32X64.dsc
Tested with SBL and coreboot on QEMU.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
