Currently, HeapGuard, when in the GuardAlignedToTail mode, assumes that
the pool head has been allocated in the first page of memory that was
allocated. This is not the case for ARM64 platforms when allocating
runtime pools, as RUNTIME_PAGE_ALLOCATION_GRANULARITY is 64k, unlike
X64, which has RUNTIME_PAGE_ALLOCATION_GRANULARITY as 4k.
When a runtime pool is allocated on ARM64, the minimum number of pages
allocated is 16, to match the runtime granularity. When a small pool is
allocated and GuardAlignedToTail is true, HeapGuard instructs the pool
head to be placed as (MemoryAllocated + EFI_PAGES_TO_SIZE(Number of Pages)
- SizeRequiredForPool).
This gives this scenario:
|Head Guard|Large Free Number of Pages|PoolHead|TailGuard|
When this pool goes to be freed, HeapGuard instructs the pool code to
free from (PoolHead & ~EFI_PAGE_MASK). However, this assumes that the
PoolHead is in the first page allocated, which as shown above is not true
in this case. For the 4k granularity case (i.e. where the correct number of
pages are allocated for this pool), this logic does work.
In this failing case, HeapGuard then instructs the pool code to free 16
(or more depending) pages from the page the pool head was allocated on,
which as seen above means we overrun the pool and attempt to free memory
far past the pool. We end up running into the tail guard and getting an
access flag fault.
This causes ArmVirtQemu to fail to boot with an access flag fault when
GuardAlignedToTail is set to true (and pool guard enabled for runtime
memory). It should also cause all ARM64 platforms to fail in this
configuration, for exactly the same reason, as this is core code making
the assumption.
This patch removes HeapGuard's assumption that the pool head is allocated
on the first page and instead undoes the same logic that HeapGuard did
when allocating the pool head in the first place.
With this patch in place, ArmVirtQemu boots with GuardAlignedToTail
set to true (and when it is false, also).
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4521
Github PR: https://github.com/tianocore/edk2/pull/4731
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
For EfiVarStore (EFI_HII_VARSTORE_EFI_VARIABLE_BUFFER), it will call
ExtractConfig-GetVariable-HiiBlockToConfig-ConfigToBlock when load storage
value in LoadStorage function. It's not necessary and costs lots of time
to do the conversion between config and block.
So now enhance it to call GetVariable directly.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The return value stored in Status after call to SetDriveParameters
is not made of any use thereafter and hence it remains as UNUSED.
Based on Hao's findings (https://edk2.groups.io/g/devel/message/106844),
the successful execution of SetDriveParameters() is not mandatory for
initializing IDE mode of a hard disk device. Hence remove the 'Status'
assignment of the return value from SetDriveParameters() and instead add
error checks & DEBUG_WARN level messages within SetDriveParameters()
function after sending INIT_DRIVE_PARAM & SET_MULTIPLE_MODE ATA commands.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4204
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Ranbir Singh <Ranbir.Singh3@Dell.com>
Signed-off-by: Ranbir Singh <rsingh@ventanamicro.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The function UsbHcGetPciAddressForHostMem has
ASSERT ((Block != NULL));
and the UsbHcFreeMem has
ASSERT (Block != NULL);
statement after for loop, but these are applicable only in DEBUG mode.
In RELEASE mode, if for whatever reasons there is no match inside the
for loop and the loop exits because of Block != NULL; condition, then
there is no "Block" NULL pointer check afterwards and the code proceeds
to do dereferencing "Block" which will lead to CRASH.
Hence, for safety add NULL pointer checks always.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4210
Signed-off-by: Ranbir Singh <Ranbir.Singh3@Dell.com>
Signed-off-by: Ranbir Singh <rsingh@ventanamicro.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4410
Inside TcgMorLockSmm.c, the SetVariableCheckHandlerMorLock() function
contains a scenario to prevent a possible dictionary attack on the MorLock
Key in accordance with the TCG Platform Reset Mitigation Spec v1.10.
The mechanism to prevent this attack must also change the MorLock Variable
Value to 0x01 to indicate Locked Without Key.
ASSERT_EFI_ERROR is added for error visibility since SetMorLockVariable
returns a status code
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Abhi Singh <Abhi.Singh@arm.com>
Acked-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
In UnsetGuardPage(), before SmmReadyToLock, remove NX and RO
memory attribute protection for guarded page since
EfiConventionalMemory in SMRAM is RW and executable before
SmmReadyToLock. If UnsetGuardPage() happens after SmmReadyToLock,
then apply EFI_MEMORY_XP to the guarded page to make sure
EfiConventionalMemory in SMRAM is NX since EfiConventionalMemory
in SMRAM is marked as NX in PiSmmCpuDxe driver when SmmReadyToLock.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Now that we have a generic method to manage memory permissions using a
PPI, we can switch to the generic version of the DXE handoff code in
DxeIpl, and drop the ARM specific version.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
If the associated PCD is set to TRUE, use the memory attribute PPI to
remap the stack non-executable. This provides a generic method for doing
so, which will be used by ARM and AArch64 as well once they move to the
generic DxeIpl handoff implementation.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The Risc-V and LoongArch specific versions of the DXE core handoff code
in DxeIpl are essentially copies of the EBC version (modulo the
copyright in the header and some debug prints in the code).
In preparation for introducing a generic PPI based method to implement
the non-executable stack, let's merge these versions, so we only need to
add this logic once.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Define a PPI interface that may be used by the PEI core or other PEIMs
to manage permissions on memory ranges. This is primarily intended for
restricting permissions to what is actually needed for correct execution
by the code in question, and for limiting the use of memory mappings
that are both writable and executable at the same time.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
If there is no port multiplier, PortMultiplierPort should be converted
to 0 to follow AHCI spec.
The same logic already applied in AtaAtapiPassThruDxe driver.
Signed-off-by: Neo Hsueh <Hong-Chih.Hsueh@amd.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
ASSERT (Private != NULL) (where Private = CR(...)) is ineffective as
CR(Ptr, Type, Member, Sig) either returns Ptr - offsetof(Type, Member),
or ASSERTS on the signature, so it's unlikely to ever return NULL (must
be passed a pointer = member's offset, or in this case, 0x4).
ASSERT on This != NULL instead.
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
When a UEFI_DRIVER attempts to open a protocol interface with BY_DRIVER
attribute that it already has open with BY_DRIVER attribute,
OpenProtocol() returns EFI_ALREADY_STARTED. This is not an error. The
UEFI-2.7 spec currently says,
> EFI_ALREADY_STARTED -- Attributes is BY_DRIVER and there is an item on
> the open list with an attribute of BY_DRIVER
> whose agent handle is the same as AgentHandle.
Downgrade the log mask for this one condition to DEBUG_INFO, in
SataControllerStart(). This will match the log mask of the other two
informative messages in this function.
(ported from commit 5dfba97)
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
System paging 5 level enabled or not can be checked via CR4.LA57, system
preferred Page table Level (PcdUse5LevelPageTable) must align with previous
level for 64bit long mode.
This patch is to do the wise check:
If cpu has already run in 64bit long mode PEI, Page table Level in DXE
must align with previous level.
If cpu runs in 32bit protected mode PEI, Page table Level in DXE is decided
by PCD and feature capability.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4438
The main dispatch loop in PeiDispatcher() goes through each FV and
calls DiscoverPeimsAndOrderWithApriori() to search Apriori file to
reorder all PEIMs then do the PEIM dispatched.
DiscoverPeimsAndOrderWithApriori() calculates Apriori file count for
every FV once and set Private->AprioriCount, but Private->AprioriCount
doesn't be set to 0 before dispatch loop walking through the next FV.
It causes the peim which sort on less than Private->AprioriCount and
depex is not satisfied would be dispatched when dispatch loop go through
to a scaned FV, even the peim is not set in APRIORI file.
Cc: Leon Chen <leon.chen@insyde.com>
Cc: Tim Lewis <tim.lewis@insyde.com>
Reported-by: Esther Lee <esther.lee@insyde.com>
Signed-off-by: Wendy Liao <wendy.liao@insyde.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Arm CI build error:
- ArmPkg/Library/CompilerIntrinsicsLib/memset.c:39:1: warning: type of
‘memset’ does not match original declaration [-Wlto-type-mismatch]
MdeModulePkg/Universal/RegularExpressionDxe/OnigurumaUefiPort.c:123:1:
note: type ‘char’ should match type ‘int’
- multiple definition of `memcpy'; OnigurumaUefiPort.obj (symbol from
plugin):(.text+0x0): first defined here
Fix:
- Update memset() implementation to match memset() definition in
ArmPkg/Library/CompilerIntrinsicsLib.
- memcpy() is supported by ArmPkg/Library/CompilerIntrinsicsLib. Exclude
it in OnigurumaUefiPort.c.
Signed-off-by: Nickle Wang <nicklew@nvidia.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Nick Ramirez <nramirez@nvidia.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
__FUNCTION__ is a pre-standard extension that gcc and Visual C++ among
others support, while __func__ was standardized in C99.
Since it's more standard, replace __FUNCTION__ with __func__ throughout
MdeModulePkg.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Update MdeModulePkg host-based unit test INF files to only list
VALID_ARCHITECTURES of IA32 and X64 to align with all other
host-based unit test INF files. The UnitTestFrameworkPkg only
provides build support of host-based unit tests to OS applications
for IA32 and X64.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4405
The memory attributes table has been extended with a flag that indicates
whether or not the OS is permitted to map the EFI runtime code regions
with strict enforcement for IBT/BTI landing pad instructions.
Given that the PE/COFF spec now defines a DllCharacteristicsEx flag that
indicates whether or not a loaded image is compatible with this, we can
wire this up to the flag in the memory attributes table, and set it if
all loaded runtime image are compatible with it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
This patch is a preparation for the patches that follow. The
subsequent patches will introduce and integrate new alignment-related
macros, which collide with existing definitions in MdeModulePkg.
Temporarily rename them to avoid build failure, till they can be
substituted with the new, shared definitions.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Marvin Häuser <mhaeuser@posteo.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=4011
Currently AHCI driver will try to retry all failed packets
regardless of the failure cause. This is a problem in password
unlock flow where number of password retries is tracked by the
device. If user passes a wrong password Ahci driver will try
to send the wrong password multiple times which will exhaust
number of password retries and force the user to restart the
machine. This commit introduces a logic to check for the cause
of packet failure and only retry packets which failed due to
transient conditions on the link. With this patch only packets for
which CRC error is flagged are retried.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hunter Chang <hunter.chang@intel.com>
Cc: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Improve the formatting of DEBUG messages in UsbBusDxe by adding
a hyphen to separate the EFI_STATUS code.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
