Copy the function BuildPlatformInfoHob() from OvmfPkg/PlatformPei.
QemuFwCfgLib expect this HOB to be present, or fails to do anything.
InternalQemuFwCfgIsAvailable() from QemuFwCfgPeiLib module will not
check if the HOB is actually present for example and try to use a NULL
pointer.
Fixes: cda98df162 ("OvmfPkg/QemuFwCfgLib: remove mQemuFwCfgSupported + mQemuFwCfgDmaSupported")
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Searching for an unused bounce buffer in mReservedMemBitmap and
reserving the buffer by flipping the bit is a critical section
which must not be interrupted. Raise the TPL level to ensure
that.
Without this fix it can happen that IoMmuDxe hands out the same
bounce buffer twice, causing trouble down the road. Seen happening
in practice with VirtioNetDxe setting up the network interface (and
calling into IoMmuDxe from a polling timer callback) in parallel with
Boot Manager doing some disk I/O. An ASSERT() in VirtioNet caught
the buffer inconsistency.
Full story with lots of details and discussions is available here:
https://bugzilla.redhat.com/show_bug.cgi?id=2211060
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make sure VirtNorFlashDxe loaded before VariableRuntimeDxe as it
is the backend flash driver.
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Normally, DXE driver would add device resource to GCD before start using.
But some key resources such as uart used for printing info at very early
stage.
Those resources should be populated to HOB in SEC phase so they are
added to GCD before MMU enabled.
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Commit 63c50d3ff2 changed the check that is
used to determine if SEV-ES is active. Originally, a CMP instruction with
a supporting JZ instruction was used for the check. It was changed to use
the BT instruction but not JZ instruction. The result of a BT instruction
changes the the carry flag (CF) and not the zero flag (ZF). As a result,
the wrong condition is being checked. Update the JZ to a JNC to properly
detect if SEV-ES is active.
Fixes: 63c50d3ff2 ("OvmfPkg/ResetVector: cache the SEV status MSR...")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Remove code that sets AddressEncMask for non-leaf entries when
modifing smm page table by MemEncryptSevLib. In FvbServicesSmm
driver, it calls MemEncryptSevClearMmioPageEncMask to clear
AddressEncMask bit in page table for a specific range. In AMD
SEV feature, this AddressEncMask bit in page table is used to
indicate if the memory is guest private memory or shared memory.
But all memory accessed by the hardware page table walker is
treated as encrypted, regardless of whether the encryption bit
is present. So remove the code to set the EncMask bit for smm
non-leaf entries doesn't impact AMD SEV feature.
The reason encryption mask should not be set for non-leaf
entries is because CpuPageTableLib doesn't consume encryption
mask PCD. In PiSmmCpuDxeSmm module, it will use CpuPageTableLib
to modify smm page table in next patch. The encryption mask is
overlapped with the PageTableBaseAddress field of non-leaf page
table entries. If the encryption mask is set for smm non-leaf
page table entries, issue happens when CpuPageTableLib code
use the non-leaf entry PageTableBaseAddress field with the
encryption mask set to find the next level page table.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The UEFI driver model invokes the supported() method on every driver
every time a connection attempt is made on any handle, and so doing an
unconditional DEBUG() print inside this method produced a lot of noise.
So let's drop this DEBUG() call from the VirtioSerial driver's
Supported() method.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Bhyve will gain support for TPM emulation in the near future. Therefore,
prepare OVMF by copying all TPM driver used by qemu's OVMF DSC into the
bhyve OVMF DSC.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
This makes the InstallQemuFwcfgTables function reusable by bhyve.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Acked-by: Peter Grehan <grehan@freebsd.org>
This is required to move InstallQemuFwCfgTables into AcpiPlatformLib.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Acked-by: Peter Grehan <grehan@freebsd.org>
Bhyve supports providing ACPI tables by FwCfg. Therefore,
InstallQemuFwCfgTables should be moved to AcpiPlatformLib to reuse the
code. As first step, move PciEncoding into AcpiPlatformLib.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Acked-by: Peter Grehan <grehan@freebsd.org>
The definition and declaration of GetAcpiRsdpFromMemory doesn't match.
We don't get a compile error yet because UINTN is the same as UINT64 on
64bit machines. As the function works on memory addresses, UINTN is the
correct type of the input parameters.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Peter Grehan <grehan@freebsd.org>
Currently, RiscVVirtQemu supports unified code and variable store
mainly because only one pflash devices was available in qemu for
EDK2. However, this doesn't allow to map the code part as read-only.
With recent qemu enhancements, it is now possible for EDK2 to make
use of both pflash devices in RISC-V virt machine. So, add support
to create code and vars images separately. This also allows easy
firmware code updates without losing the variable store.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
It's much easier to create configuration dependent ACPI tables for bhyve
than for OVMF. For this reason, don't use the statically created ACPI
tables provided by OVMF. Instead, prefer the dynamically created ACPI
tables of bhyve. If bhyve provides no ACPI tables or we are unable to
detect those, fall back to OVMF tables.
Ideally, we use the qemu fwcfg interface to pass the ACPI tables from
bhyve to OVMF. bhyve will support this in the future. However, current
bhyve executables don't support passing ACPI tables by the qemu fwcfg
interface. They just copy the ACPI into main memory. For that reason,
pick up the ACPI tables from main memory.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Peter Grehan <grehan@freebsd.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Xen and bhyve are placing ACPI tables into system memory. So, they can
share the same code. Therefore, create a new library which searches and
installs ACPI tables from system memory.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Edk2 was failing, rather than creating more PML4 entries, when they
weren't present in the initial memory acceptance flow. Because of that
VMs with more than 512G memory were crashing. This code fixes that.
This change affects only SEV-SNP VMs.
The code was tested by successfully booting a 512G SEV-SNP VM.
Signed-off-by: Mikolaj Lisik <lisik@google.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
The RISC-V version of the DXE IPL does not implement setting the stack
NX, so before switching to an implementation that will ASSERT() on the
missing support, drop the PCD setting that enables it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Now that OvmfPkg/SataControllerDxe and its MdeModulePkg counterpart have
been unified, and no in-tree uses of the OVMF variant remain, let's
delete it.
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Replace the OVMF-specific SataControllerDxe (to be later removed) with
the generic, MdeModulePkg one, for the OvmfXen platform.
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Replace the OVMF-specific SataControllerDxe (to be later removed) with
the generic, MdeModulePkg one, for the AmdSev platform.
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the OVMF-specific SataControllerDxe (to be later removed) with
the generic, MdeModulePkg one, for the IntelTdx platform.
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Replace the OVMF-specific SataControllerDxe (to be later removed) with
the generic, MdeModulePkg one, for the CloudHv platform.
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the OVMF-specific SataControllerDxe (to be later removed) with
the generic, MdeModulePkg one, for the Microvm platform.
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the OVMF-specific SataControllerDxe (to be later removed) with
the generic, MdeModulePkg one, for OvmfPkg{Ia32, X64, Ia32X64} platforms.
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
