__FUNCTION__ is a pre-standard extension that gcc and Visual C++ among
others support, while __func__ was standardized in C99.
Since it's more standard, replace __FUNCTION__ with __func__ throughout
UefiCpuPkg.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
InitializeCpuExceptionHandlers() expects caller allocates IDT while
InitializeCpuInterruptHandlers() allocates 256 IDT entries itself.
InitializeCpuExceptionHandlers() fills max 32 IDT entries allocated
by caller. If caller allocates 10 entries, the API just fills 10 IDT
entries.
The inconsistency between the two APIs makes code hard to
unerstand and hard to share.
Because there is only one caller (CpuDxe) for
InitializeCpuInterruptHandler(), this patch updates CpuDxe driver
to allocates 256 IDT entries then call
InitializeCpuExceptionHandlers().
This is also a backward compatible change.
With this change, InitializeCpuInterruptHandlers() is removed
completely.
And InitializeCpuExceptionHandlers() fills max 32 entries for PEI
and SMM instance, max 256 entries for DXE instance.
Such behavior matches to the original one.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
BZ#1127: https://bugzilla.tianocore.org/show_bug.cgi?id=1127
It's reported the debug message in CpuDxe driver is quite annoying in
boot and shell, and slow down the boot process. To solve this issue,
this patch changes the DEBUG_INFO to DEBUG_VERBOSE. On a typical Intel
real platform, at least 16s boot time can be saved.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
One of the functionalities of CpuDxe is to update memory paging attributes.
If page table protection is applied, it must be disabled temporarily before
any attributes update and enabled again afterwards.
This patch makes use of the same way as DxeIpl to allocate page table memory
from reserved memory pool, which helps to reduce potential "split" operation
and recursive calling of SetMemorySpaceAttributes().
Laszlo (lersek@redhat.com) did a regression test on QEMU virtual platform with
one middle version of this series patch. The details can be found at
https://lists.01.org/pipermail/edk2-devel/2017-December/018625.html
There're a few changes after his work.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Current CpuGetTimerValue() implementation return hard code TimerPeriod value. We
could calculate the actual TimerPeriod value over period of time (100us) at the
first time invoking CpuGetTimerValue() and save the TimerPeriod value into one
global variable to avoid delay at the next CpuGetTimerValue() invoking.
https://bugzilla.tianocore.org/show_bug.cgi?id=382
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
Local APIC memory mapped space should be added into GCD and be allocated.
Otherwise, UEFI firmware cannot get correct memory map for it. For example,
SMM profile feature needs to get the completed MMIO map to protect them.
v2:
Consume AddMemoryMappedIoSpace() to handle the case that Local APIC
memory space has already been added before.
https://bugzilla.tianocore.org/show_bug.cgi?id=390
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Add memory attribute setting in CpuArch protocol.
Previous SetMemoryAttributes() API only supports cache attribute setting.
This patch updated SetMemoryAttributes() API to support memory attribute
setting by updating CPU page table.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Consume MP Initialize library to produce CPU MP Protocol services to simply the
code.
v4:
1. Update CpuDxe.c file header to mention it produces CPU Arch protocol.
2. Update BistData type from UINT32 to EFI_HEALTH_FLAG.
3. Move some header location from CpuMp.h to CpuDxe.h.
v3:
1. Move the code Consume MpInitLib APIs to produce CPU MP Protocol from patch
#40 to this patch.
2. Add DxeMpInitLib.inf in DSC file
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
SetMemoryAttributes() will sync BSP's MTRRs settings to all APs by StartupAllAPs
service in serial mode. It may caused much performance impact if there are too
much processors in system. This update is to invoke StartupAllAps in parallel
mode. IA32 SDM does suggest to program MTRRs in parallel mode.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The Quark_EDKII_v1.1.0/IA32FamilyCpuBasePkg/CpuArchDxe
driver applies any MTRR changes to APs, if the
EFI_MP_SERVICES_PROTOCOL is available. We should do the same.
Additionally, the broadcast should occur at MP startup as well,
not only when MTRR settings are changed. The inspiration is
taken from
Quark_EDKII_v1.1.0/IA32FamilyCpuBasePkg/CpuMpDxe/
(see the EarlyMpInit() function and its call sites in
"ProcessorConfig.c").
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18632 6f19259b-4bc3-4df7-8a09-765794883524
2. Invoke MtrrGetDefaultMemoryType() to get the default memory type instead of the hard code value in module.
3. Add go though for UC attributes.
Signed-off-by: vanjeff
Reviewed-by: rsun3
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12587 6f19259b-4bc3-4df7-8a09-765794883524
When the MdeModulePkg gCoreEventIdleGuid event is signaled,
CpuSleep is called. This will cause the CPU to sleep until
the next interrupt occurs.
Signed-off-by: jljusten
Reviewed-by: mdkinney
Reviewed-by: rsun3
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11842 6f19259b-4bc3-4df7-8a09-765794883524
If Attributes specifies a combination of memory attributes that cannot be set together, then EFI_INVALID_PARAMETER is returned. For example, if both EFI_MEMORY_UC and EFI_MEMORY_WT are set.
Signed-off-by: rsun3
Reviewed-by: jyao1
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11694 6f19259b-4bc3-4df7-8a09-765794883524
If DEBUG_PROPERTY_DEBUG_CODE_ENABLED is also set in PcdDebugPropertyMask, then the entire set of MTRRs will be displayed on every memory cache setting change.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11231 6f19259b-4bc3-4df7-8a09-765794883524
The change in r10765 introduced an issue where inherited interrupt
handlers would override the driver's RegisterInterruptHandler
functionality.
DUET installs a IDT with 256 entries early in it's boot. Therefore,
no interrupt handlers could be installed with DUET while using
UefiCpuPkg/CpuDxe (instead of DuetPkg/CpuDxe).
This change forces the IDT to be modified when RegisterInterruptHandler
is called to ensure the UEFI handler will be installed properly.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10972 6f19259b-4bc3-4df7-8a09-765794883524
