The ARM implementation of InternalLongJump always returned the value
Value - but it is not supposed to ever return 0. Add the test to prevent
that, and return 1 if Value is 0 - as is already present in AArch64.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Both in SetJump and in InternalLongJump, 32-bit w register views were
used for the UINTN return value. In SetJump, this did not cause errors;
it was only counterintuitive. But in InternalLongJump, it meant the top
32 bits of Value were stripped off.
Change all of these to use the 64-bit x register views.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reanimated-by: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
The EFI_RNG_PROTOCOL can use the RngLib. The RngLib has multiple
implementations, some of them are unsafe (e.g. BaseRngLibTimerLib).
To allow the RngDxe to detect when such implementation is used,
add a GetRngGuid() function to the RngLib.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Kun Qin <kun.qin@microsoft.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4441
The EFI_RNG_PROTOCOL can rely on the RngLib. The RngLib has multiple
implementations, some of them are unsafe (e.g. BaseRngLibTimerLib).
To allow the RngDxe to detect when such implementation is used,
a GetRngGuid() function is added in a following patch.
Prepare GetRngGuid() return values and add a gEfiRngAlgorithmArmRndr
to describe a Rng algorithm accessed through Arm's RNDR instruction.
[1] states that the implementation of this algorithm should be
compliant to NIST SP900-80. The compliance is not guaranteed.
[1] Arm Architecture Reference Manual Armv8, for A-profile architecture
sK12.1 'Properties of the generated random number'
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Kun Qin <kun.qin@microsoft.com>
The DxeRngLib tries to generate a random number using the 3 NIST
SP 800-90 compliant DRBG algorithms, i.e. 256-bits CTR, HASH and HMAC.
If none of the call is successful, the fallback option is the default
RNG algorithm of the EFI_RNG_PROTOCOL. This default algorithm might
be an unsafe implementation.
Try requesting the Raw algorithm before requesting the default one.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Kun Qin <kun.qin@microsoft.com>
In order to use PcdCpuRngSupportedAlgorithm in the MdePkg in a
following patch and to avoid making the MdePkg dependent on another
package, move PcdCpuRngSupportedAlgorithm to the MdePkg.
As the Pcd is only used for AARCH64, place it in an AARCH64
specific sections.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Tested-by: Kun Qin <kun.qin@microsoft.com>
Remove workaround for the redefinition of the type
RUNTIME_FUNCTION that is generated when building with
VS20xx tool chains and using windows include files.
The correct location for this fix is in the EmulatorPkg
in the WinInclude.h file that addresses all the name
collisions between edk2 types and windows types.
The commit that added the workaround is:
ff52068d92
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4182
Adds an SMM SMRAM save-state map for AMD processors.
SMRAM save state maps for the AMD processor family are now supported.
Save state map structure is added based on
AMD64 Architecture Programmer's Manual, Volume 2, Section 10.2.
The AMD legacy save state map for 32-bit architecture is defined.
The AMD64 save state map for 64-bit architecture is defined.
Also added Amd/SmramSaveStateMap.h to IgnoreFiles of EccCheck,
because structures defined in this file are derived from
Intel/SmramSaveStateMap.h.
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
This commit is code optimization to InternalAllocateAlignedPages of
SmmMemoryAllocationLib which can reduce free memory fragments. Also
it can reduce one pre-allocation page.
Let's take a simple example:
The expected pages size is 8KB, Alignment value is 8KB.
In original InternalAllocateAlignedPages(), the first step is to
allocate 4 pages and then find the first 8KB-aligned address in
allocated 4 pages. If the upper limit address of allocated 4 pages
is already 8KB aligned, then the allocated 4 pages contains two
8KB-aligned 8KB ranges. The lower 2 pages will be selected and
removed from free pages. Then the higher 2 pages will be free.
Since the whole memory allocation is from high address to low
address, then the higher 2 pages cann't be merged with other free
pages, causing the free memory fragments.
However, when only allocate 3(2+2-1) pages, we can avoid the free
memory fragments in specific case. Also 3 pages must contain a
8KB-aligned 8KB range, which meets the requirement. If the upper
limit address of allocated 3 pages is 8KB-aligned, then the higher
2 pages range of allocated 3 pages is 8KB-aligned and will be
selected and removed from free pages. The remaining lower one page
of allocated 3 pages will be free and merged with left lower free
memory. This can reduce free memory fragments in smm.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Implement the SpeculationBarrier with implementations consisting of
fence instruction which provides finer-grain memory orderings.
Perform Data Barrier in RiscV: fence rw,rw
Perform Instruction Barrier in RiscV: fence.i; fence r,r
More detail is in Appendix A: RVWMO Explanatory Material in
https://github.com/riscv/riscv-isa-manual
This API is first introduced in the below commits for IA32 and x64
d9f1cac51be83d841fdc
and below the commit for ARM and AArch64 implementation
c0959b4426
This commit is to add the RiscV64 implementation which will be used by
variable service under Variable/RuntimeDxe
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Evan Chai <evan.chai@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Tuan Phan <tphan@ventanamicro.com>
Signed-off-by: Yong Li <yong.li@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
The BaseTools and MdePkg versions of PeImage.h diverged over time,
add some missing bits to the MdePkg header file in preparation for
removing the BaseTools version.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Not needed any more on modern toolchains, they are better
in not creating a GOT without this trick.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
These are implementations of SerialPortLib using SBI console services.
- BaseSerialPortLibRiscVSbiLib is appropriate for SEC/PEI (XIP)
environments
- BaseSerialPortLibRiscVSbiLibRam is appropriate for PrePI/DXE
environments
Tested with:
- Qemu RiscVVirt (non-DBCN case, backed by UART)
- TinyEMU + RiscVVirt (non-DBCN case, HTIF)
- TinyEMU + RiscVVirt (DBCN case, HTIF)
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Older versions of GenFw put the wrong value in the debug directory size
field in the PE/COFF header: instead of putting the combined size of all
the entries, it puts the size of the only entry it creates, but adds the
size of the NB10 payload that the entry points to. This confuses the
loader now that we started using additional debug directory entries to
describe DLL characteristics.
GenFw was fixed in commit 60e85a39fe, but the binaries that were
generated with it still need to be supported.
So let's detect this condition, and check whether the size of the debug
directory is consistent with the NB10 payload: if we should expect
additional directory entries where we observe the NB10 payload, the size
field is clearly wrong, and we can break from the loop.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4425
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Tested-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Michael Kubacki <michael.kubacki@microsoft.com>
