To avoid messy parsing of the Depex section of a Capsule, it would
be a lot easier for everyone involved if we preceded the Capsule Depex
Section with a length declaration. It provides simple bounds checking
to avoid having to parse the op-codes, but in the case of a malformed
depex being parsed, avoid other issues which can be messy.
REF: UEFI spec 2.10 Table 23.4
Signed-off-by: Yi Li <yi1.li@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Implement Cache Management Operations (CMO) defined by
RISC-V spec https://github.com/riscv/riscv-CMOs.
Notes:
1. CMO only supports block based Operations. Meaning cache
flush/invd/clean Operations are not available for the entire
range. In that case we fallback on fence.i instructions.
2. Operations are implemented using Opcodes to make them compiler
independent. binutils 2.39+ compilers support CMO instructions.
Test:
1. Ensured correct instructions are refelecting in asm
2. Qemu implements basic support for CMO operations in that it allwos
instructions without exceptions. Verified it works properly in
that sense.
3. SG2042Pkg implements CMO-like instructions. It was verified that
CpuFlushCpuDataCache works fine. This more of less
confirms that framework is alright.
4. TODO: Once Silicon is available with exact instructions, we will
further verify this.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Dhaval Sharma <dhaval@rivosinc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Sunil V L <sunilvl@...>
Reviewed-by: Jingyu Li <jingyu.li01@...>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4609
The current CalculateCrc16Ansi implementation does the following:
1) Invert the passed checksum
2) Calculate the new checksum by going through data and using the
lookup table
3) Invert it back again
This emulated my design for CalculateCrc32c, where 0 is
passed as the initial checksum, and it inverts in the end.
However, CRC16 does not invert the checksum on input and output.
So this is incorrect.
Fix the problem by not inverting input checksums nor output checksums.
Callers should now pass CRC16ANSI_INIT as the initial value instead of
"0". This is a breaking change.
This problem was found out-of-list when older ext4 filesystems
(that use crc16 checksums) failed to mount with "corruption".
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Add the bit masks for DLL Characteristics, used within the optional
header of a PE, to the PeImage.h header file.
Update the Visual Studio, Microsoft Portable Executable and Common
Object File Format Specification, and the PE/COFF Specification to the
latest version.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Joey Vagedes <joeyvagedes@gmail.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
The ASWG ECR 2303 introduces a new field 'TRBE
interrupt' to GICC structure in ACPI 6.5.
The Trace Buffer Extension (TRBE) interrupt is a
Processor Private interrupt (PPI) and is used to
specify a platform-specific interrupt to signal
TRBE events.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Bugzilla: 3706 'Code First - MADT GICC new flags'
On ARM systems physical CPU hotplug is not supported.
All CPUs are considered present and this is true
throughout the system uptime.
The ECR 2285 introduces a new 'online-capable' flag
in the GICC structure flags in ACPI 6.5, to signal
firmware policy (CPU is not enabled but it can be
enabled and onlined). This enables OSPM to support
virtual CPU hotplug (on virtual platforms for
instance).
This ECR also updates the MADT table revision to 6
to reflect the ACPI 6.5 changes. Therefore, update
the MADT table revision to match the value as
specified in ACPI 6.5.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
The PLDM protocol uses Request bit to help differentiate between PLDM
request and response messages.
Currently the Pldm.h header only have a flag for the request message.
Add a flag for the response message as well.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Correct MCTP_TRANSPORT_HEADER structure field 'SourceEndpointIdId' to
'SourceEndpointId'.
Signed-off-by: Abner Chang <abner.chang@amd.com>
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
The EFI_RNG_PROTOCOL can use the RngLib. The RngLib has multiple
implementations, some of them are unsafe (e.g. BaseRngLibTimerLib).
To allow the RngDxe to detect when such implementation is used,
add a GetRngGuid() function to the RngLib.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Kun Qin <kun.qin@microsoft.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4441
The EFI_RNG_PROTOCOL can rely on the RngLib. The RngLib has multiple
implementations, some of them are unsafe (e.g. BaseRngLibTimerLib).
To allow the RngDxe to detect when such implementation is used,
a GetRngGuid() function is added in a following patch.
Prepare GetRngGuid() return values and add a gEfiRngAlgorithmArmRndr
to describe a Rng algorithm accessed through Arm's RNDR instruction.
[1] states that the implementation of this algorithm should be
compliant to NIST SP900-80. The compliance is not guaranteed.
[1] Arm Architecture Reference Manual Armv8, for A-profile architecture
sK12.1 'Properties of the generated random number'
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Kun Qin <kun.qin@microsoft.com>
Remove workaround for the redefinition of the type
RUNTIME_FUNCTION that is generated when building with
VS20xx tool chains and using windows include files.
The correct location for this fix is in the EmulatorPkg
in the WinInclude.h file that addresses all the name
collisions between edk2 types and windows types.
The commit that added the workaround is:
ff52068d92
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4182
Adds an SMM SMRAM save-state map for AMD processors.
SMRAM save state maps for the AMD processor family are now supported.
Save state map structure is added based on
AMD64 Architecture Programmer's Manual, Volume 2, Section 10.2.
The AMD legacy save state map for 32-bit architecture is defined.
The AMD64 save state map for 64-bit architecture is defined.
Also added Amd/SmramSaveStateMap.h to IgnoreFiles of EccCheck,
because structures defined in this file are derived from
Intel/SmramSaveStateMap.h.
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
