Fix build warnings for potentially uninitialized local variables
in the functions ShellMmLocateIoProtocol() and ShellCommandRunMm()
in the Shell implementation of the 'mm' command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19233 6f19259b-4bc3-4df7-8a09-765794883524
When the FvSimpleFileSystemDxe module is included in a platform,
Simple File System Protocols are produced for firmware volumes(FV)
that do not have the same style device paths as file systems with
file names. The ShellPkg has an assumption that the device path
contains device path nodes of type MEDIA_FILEPATH_DP and generates
an ASSERT() if any other device path nodes are encountered. This
change removes the ASSERT() condition and instead returns NULL that
means EfiShellGetFilePathFromDevicePath() can not convert the
device path nodes that represent the file path to a Unicode string.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19228 6f19259b-4bc3-4df7-8a09-765794883524
In multiple root bridge platforms, different root bridges may
share the same segment but occupy different range of buses,
or may occupy different segments.
The fix is to find the correct root bridge IO instance by
comparing not only the segment but also the bus ranges.
It tries to access the MMIO and IO in the following order:
PciRootBridgeIo, CpuIo and direct IO.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19181 6f19259b-4bc3-4df7-8a09-765794883524
In some platform 'map -r' may cost more than 1 min. This patch filter the target handles by
BlockIO and SimpleFileSystem protocol to reduce the time cost.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19149 6f19259b-4bc3-4df7-8a09-765794883524
When CustomCumulativeToken is not NULL, the CustomCumulativeData is expected non-NULL.
Add 'ASSERT' statement to ensure this.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18956 6f19259b-4bc3-4df7-8a09-765794883524
Building the latest shell on RVCT exposed this warning:
ShellPkg\Application\Shell\Shell.c(1090,69): error #191-D: type qualifier is meaningless on cast type
The CONST in the cast was deemed meaningless. Removing the CONST fixed the warning.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cohen Eugene <eugene@hp.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18954 6f19259b-4bc3-4df7-8a09-765794883524
Per Shell SPEC 2.1 'Double-quotation marks that surround arguments are not stripped in positional parameters'. This patch makes Shell implementation to follow SPEC.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18742 6f19259b-4bc3-4df7-8a09-765794883524
The value of PERF_CUM_DATA.Count and PERF_CUM_DATA.Duration field
keep cumulating on every execution of dp.
Initialize the CumData at dp's entry point.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18727 6f19259b-4bc3-4df7-8a09-765794883524
1. Add a new function 'RunShellCommand' to return command status, thus 'EfiShellExecute' can get the command return status of 'CommandLine'.
2. Refine the code logic of 'EfiShellExecute' to make the new image of shell be loaded only if 'Environment' isn't NULL.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Signed-off-by: Jin Eric <eric.jin@intel.com>
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18664 6f19259b-4bc3-4df7-8a09-765794883524
Changing 'tftp' command's help output .uni file to match other EDK2 Shell commands as well as adjusting error messages text.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18659 6f19259b-4bc3-4df7-8a09-765794883524
In Shell spec 2.1 the return name of EFI_SHELL_PROTOCOL.GetCurDir() is defined as 'fs0:\current-dir' while in current implementation it's 'fs0:\current-dir\'.
To follow spec the patch removed the redundant '\' char.
Since it has been broken for a long time, some codes may depend on the broken behavior.
After this change 'EFI_SHELL_PROTOCOL.GetCurDir()' and 'UefiShellLib.ShellGetCurrentDir()'
will return a current directory string without tailing '\' (fs0:\current-dir), the value of Shell environment variable 'cwd' will become 'fs0:\current-dir' as well.
This patch has updated all the code in EDKII to make them depend on the new behavior.
Developers should check whether 'GetCurDir()' and 'ShellGetCurrentDir' are used in their source code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18653 6f19259b-4bc3-4df7-8a09-765794883524
If you try to 'set' a read only environment variable and it fails without printing any information.
This patch add error message printing when 'set' environment variable fails.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18598 6f19259b-4bc3-4df7-8a09-765794883524
TestArgv.nsh is a very simple shell script to test how the interpreter parses
the parameters. It uses ShellCTestApp.efi to dump the parameters passed from the
interpreter.
TestArgv.log is the desired output created using "TestArgv.nsh > TestArgv.log".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18558 6f19259b-4bc3-4df7-8a09-765794883524
Build all the optional libraries unconditionally so we can catch changes and how they affect the package regardless of the NO_SHELL_PROFILES,
INCLUDE_DP, and INCLUDE_TFTP_COMMAND settings.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18557 6f19259b-4bc3-4df7-8a09-765794883524
1. Fix GCC build fail.
2. It's not correct to cast away constness to allow TrimSpaces() to modify 'commandline'.
This patch makes a copy of 'commandLine' and work with that in the remainder of the function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18500 6f19259b-4bc3-4df7-8a09-765794883524
When execute a command with tailing blank spaces in ShellProtocol.Execute() Shell will fail.
This patch move the TrimSpaces operation into ParseCommandLineToArgs function to fix the problem.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yang Jadis <jadis.yang@intel.com>
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18491 6f19259b-4bc3-4df7-8a09-765794883524
Since Shell will remove the quotes in parameters, setvar cannot receive the quotes from ="ascii" or =L"unicode". User should add ^ to escape quotes in setvar data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18454 6f19259b-4bc3-4df7-8a09-765794883524
When boot from Shell we can use '-delay [num]' as optional data. If blank space exist after '[num]' Shell will fail. This patch add error handling to avoid this failure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18431 6f19259b-4bc3-4df7-8a09-765794883524
Some of the libraries under ShellPkg/Library/ are only intended to be
loaded into the Shell by means of a NULL LibraryClass resolution, and
serve no other purpose. Since the Shell itself is a UEFI_APPLICATION, it
makes sense to set the module type of those libraries to UEFI_APPLICATION
as well.
This allows us to use different compiler flags for the Shell application
itself but also for the majority of its constituent parts that are built
separately via these libraries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18310 6f19259b-4bc3-4df7-8a09-765794883524
R18201 fix caused ifconfig in shell failed to get the address from dhcp with the
command "ifconfig -s eth0 dhcp" since the default policy is dhcp already.
We can fix it by following the rule to starting the Ip4 auto configuration.
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviwed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18244 6f19259b-4bc3-4df7-8a09-765794883524
1. Refine parameter name to consistent with function headers.
2. To avoid potential bug BOOLEAN values should not use explicit comparisons to TRUE or FALSE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18222 6f19259b-4bc3-4df7-8a09-765794883524
