https://bugzilla.tianocore.org/show_bug.cgi?id=1617
gEdkiiPeiFirmwareVolumeInfoStoredHashFvPpiGuid should be installed by
platform to pass FV hash information to the common FV verify/report
driver, in which the hash value will be calculated again based on the
information fed in and then verified.
The information passed in this PPI include:
- FVs location in flash and length
- Hash values for different boot mode
The hash value must be calculated in following way (if 3 FVs to calc):
FV1 -> Hash1
FV2 -> Hash2
FV3 -> Hash3
Hash1 + Hash2 + Hash3 -> HashAll
Only HashAll is stored in this PPI. The purposes for this algorithm
are two:
1. To report each FV's hash to TCG driver and verify HashAll at the
same time without the burden to calculate the hash twice;
2. To save hash value storage due to potential hardware limitation
Different boot mode may have its own hash value so that each mode can
decide which FV will be verified. For example, for the sake of performance,
S3 may choose to skip some FVs verification and normal boot will verify
all FVs it concerns.
So in this PPI, each FV information has flag to indicate which boot mode
it will be taken into hash calculation.
And if multiple hash values passed in this PPI, each has a flag to indicate
which boot mode it's used for. Note one hash value supports more than one
boot modes if they're just the same.
PcdStatusCodeFvVerificationPass and PcdStatusCodeFvVerificationFail are
introduced to report status back to platform, and platform can choose how
to act upon verification success and failure.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: "Hernandez Beltran, Jorge" <jorge.hernandez.beltran@intel.com>
Cc: Harry Han <harry.han@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1427
1. UserIdentifyManagerDxe is used to provide UserManagerProtocol.
2. UserProfileManagerDxe provides UI setting
3. PwdCredentialProviderDxe & UsbCredentialProviderDxe are implementation
examples.
Remove above features because of no platform use it.
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Zhang Chao B <chao.b.zhang@intel.com>
Pyrite 2.0 spec has been published, update the spec link info for this file.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Add SHA384, 512 Hash lib support. Now only CryptoPkg support PEI/DXE
version.
Cc: Long Qin <qin.long@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhang Chao B <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Add link and version info for the referenced spec.
Cc: Jiewen yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
New solution for this issue will be provided.
This reverts commits from d1947ce509
to bda034c34d.
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
To make the description more clear, update the description
for parameter Buffer of GetDigestListSize() to
"Buffer to hold copied TPML_DIGEST_VALUES compact binary.".
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by : Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Several issues exist in TCG2 PP
1. TCG2 PP use NVS PPRQ/PPRM as PP parameter as well as current
PP state cache. But it doesn't handle PP set failure case
2. TCG2 PP Submit TPM Operation Request to Pre-OS Environment forgets
to clean PPRM
3. Potential alignment issue
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
This patch extracts function Tpm2GetCapabilitySupportedAndActivePcrs()
from drivers and also update Tcg2ExecutePhysicalPresence() to call
Tpm2GetCapabilitySupportedAndActivePcrs() instead of
Tcg2Protocol->GetCapability to query the TPM to determine which
hashing algorithms are supported.
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
This patch just moves function CopyDigestListToBuffer() from
drivers to library with HashAlgorithmMask parameter added to
make the interface more applicable.
The related function IsHashAlgSupportedInHashAlgorithmMask()
is also moved from drivers to library as internal function.
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
This patch just moves function GetDigestListSize() from
drivers to library and no functionality change.
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
This patch just moves function Tpm2GetDigestFromDigestList() from
drivers to library as GetDigestFromDigestList() and no functionality change.
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
This patch just moves function Tpm2CommandAllocPcr() from
DxeTcg2PhysicalPresenceLib.c to Tpm2CommandLib as Tpm2PcrAllocateBanks()
and no functionality change.
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Check the BlockSid feature capability through check
BlockSid header in the DiscoveryHeader.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
APIs used to support opal password solution to trig opal command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Library APIs used to create commands defined by TCG storage opal spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
APIs used to create commands defined by TCG storage core spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
1. Delete TpmMeasurementLib LibraryClass from SecurityPkg after it moved to MdeModulePkg.
2. Update DxeTpmMeasurementLib.inf to include MdeModulePkg.dec.
3. Delete authenticated variable definition from AuthenticatedVariableFormat.h after
them moved to VariableFormat.h.
4. Replace VARIABLE_HEADER with AUTHENTICATED_VARIABLE_HEADER in EsalVariableDxeSal.
5. Delete VariableInfo from SecurityPkg after it merged to VariableInfo in MdeModulePkg.
6. Delete VariablePei from SecurityPkg after it merged to VariablePei in MdeModulePkg.
7. Delete Auth Variable driver from SecurityPkg after it merged to Variable driver in
MdeModulePkg.
8. Also update PACKAGE_GUID and PACKAGE_VERSION in SecurityPkg.dec after the deletion
of authenticated variable definition, VariableInfo, VariablePei and Auth Variable
driver from SecurityPkg; update PLATFORM_VERSION in SecurityPkg.dsc.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17772 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Implement AuthVariableLib library instance.
2. Temporarily add VARIABLE_ENTRY_CONSISTENCY and
variable attribute combinations definitions to
AuthenticatedVariableFormat.h for git bisect.
Why to do:
1. Share code.
Separate auth variable service from Auth Variable driver in
SecurityPkg to AuthVariableLib. Then the AuthVariableLib could benefit
and be used by different implementation of Auth Variable drivers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17758 6f19259b-4bc3-4df7-8a09-765794883524
